Beruflich Dokumente
Kultur Dokumente
V6.00
Product Information
This DVD-ROM contains the IEC 61850 System Configurator in its current version V6.00.
The IEC 61850 System Configurator enables you to configure and set parameters for
IEC 61850 stations (Edition 1 and Edition 2). This tool allows you to manage sub-networks,
network communicators, and their IP addresses and to connect the information items of
different communicators.
The IEC 61850 standard has been defined in cooperation with manufacturers and users to
create a uniform, future-proof basis for the protection, communication, and control of
substations.
· Interoperability: With IEC 61850, you will not encounter protocol diversity and
integration problems.
· Reduction of costs: IEC 61850 replaces wiring among feeders, control switches, and
signaling devices.
· Reliability: It uses only one communication channel for all the real time data
synchronized using Ethernet.
All components are available in English, German, French, Italian, Portuguese, Spanish,
Russian, Turkish, and Chinese.
Installation Notes
The installation notes in this document contain important information required to
install the IEC 61850 System Configurator. Read these notes before installing the
software.
These Open Source Software files are protected by copyright. Your compliance with those
license conditions will entitle you to use the Open Source Software as foreseen in the
relevant license. In the event of conflicts between Siemens license conditions and the
Open Source Software license conditions, the Open Source Software conditions shall
prevail with respect to the Open Source Software portions of the software.
The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source
Software License Conditions provide for it you can order the source code of the Open
Source Software from your Siemens sales contact - against payment of the shipping and
handling charges - for a period of at least 3 years since purchase of the Product. We are
liable for the Product including the Open Source Software contained in it pursuant to the
license conditions applicable to the Product. Any liability for the Open Source Software
beyond the program flow intended for the Product is explicitly excluded. Furthermore any
liability for defects resulting from modifications to the Open Source Software by you or third
parties is excluded. We do not provide any technical support for the Product if it has been
modified.
NOTE
If you use the IEC 61850 System Configurator on a laptop with power management,
then Siemens recommends using the IEC 61850 System Configurator on that laptop
while it is attached to an external power outlet. This avoids power drops due to
energy-saving modes of the laptop running on batteries.
3) 32-Bit: Operating systems with 32-bit support (DIGSI 5 can neither be installed nor operated on 32-bit operating systems)
*) Including security update KB3033929 or other security patch incorporating this security update.
NOTE
If you are using multiple Ethernet adaptors in your PC, you need VMWare
Workstation to select the correct Ethernet adaptor for the connection to the devices. If
just one Ethernet adaptor is present, then the free-of-charge VMWare Player is
sufficient to run the IEC 61850 System Configurator.
The versions V4.xx, V5.xx and V6.xx of the IEC 61850 System Configurator can be
installed and used on the same system in parallel.
Note: The versions V4.xx were released earlier with DIGSI 4 versions earlier than DIGSI
4.88.
The usage of the IEC 61850 System Configurator with DIGSI 4 and DIGSI 5 on the same
system is possible.
From DIGSI 5 V6.00 on, the support of the IEC 61850 System Configurator is integrated.
Projects created with previous versions of DIGSI 5 must be converted first. For more
information, refer to the DIGSI 5 Product Information and Online Help.
FASE
FASE V2.50 and higher and the IEC 61850 System Configurator V6.00 can be installed
and used on the same system in parallel.
ReyDisp Manager
The ReyDisp Manager and the IEC 61850 System Configurator V6.00 can be installed and
used on the same system in parallel.
SICAM ToolBox II
The SICAM ToolBox II and the IEC 61850 System Configurator V6.00 can be installed and
used on the same system in parallel.
SICAM PAS and the IEC 61850 System Configurator V6.00 can be installed and used on
the same system in parallel.
Virus-Scanner Software
5 Installation
5.1 General Notes on Installation
NOTE
You need administrator rights to install IEC 61850 System Configurator. However,
IEC 61850 System Configurator users only need standard rights to work with the
application without any restrictions.
NOTE
The download version of IEC 61850 System Configurator provided in the Internet can
update IEC 61850 System Configurator installations from V5.00 and higher. It
requires an already installed IEC 61850 System Configurator on the PC.
1.) Download the ZIP setup file from the IEC 61850 System Configurator download area.
(http://www.Siemens.com/digsi => IEC 61850 System Configurator => Downloads)
2.) Decompress the files to a local folder on your PC. Keep the folder structure as it is in the
ZIP archive.
4.) Select the language to be used for the installation process from the list box and click OK
to confirm.
5.) Click Next.
7.) Click Browse…, if you want to the change the installation folder.
8.) Navigate to the desired location and click OK.
NOTE
This command line can be used to install the IEC 61850 System Configurator as a
standalone version without DIGSI.
1.) Open the directory containing the “Setup.exe” of the IEC 61850 System Configurator
setup package.
2.) Call the “Setup.exe” either through the command line or via any script with the following
parameters:
NOTE
Quotes are not expected surrounding the value of the parameters like
Once the silent installation is started, you can see a process “Setup.exe” running in the task
manager. It will be closed automatically once the installation is completed.
For more information regarding the setup progress, look at the installation logs.
6 Uninstallation
6.1 Uninstallation of the IEC 61850 System Configurator
With the Windows uninstaller, you can remove the IEC 61850 System Configurator with all
optional components from your PC. During uninstallation, the IEC 61850 System
Configurator installer removes all program files installed. The user-specific data like
projects remain unaffected.
7 Release Notes
NOTE
1 purchased license can be used to install IEC 61850 System Configurator on 10
PCs.
Internet
To be up-to-date in future, use the offer at the Siemens download Internet site under
http://www.Siemens.com/digsi => IEC 61850 System Configurator => Downloads
If you are interested in IEC 61850 trainings, contact your sales partner or the Siemens
Power Academy Trainings Office, calling +49 (911) 433-7415.
8 Features
8.1 New Features and Modifications
1. Faster workflows with DIGSI 5
IID files from DIGSI 5 can be updated without first closing IEC 61850 System
Configurator and later reopening it to add signals in a DataSet.
This improves the performance and the usability.
9 Support
For questions about the IEC 61850 System Configurator, please contact the Siemens
Customer Support Center.
E-mail: support.energy@siemens.com
Internet: http://www.siemens.com/energy-support
Produktinformation
Haftungsausschluss Copyright
Änderungen und Irrtümer vorbehalten. Die Informationen Copyright © Siemens AG 2019
in diesem Dokument enthalten lediglich allgemeine Alle Rechte vorbehalten.
Beschreibungen bzw. Leistungsmerkmale, welche im
konkreten Anwendungsfall nicht immer in der Weitergabe sowie Vervielfältigung, Verbreitung und
beschriebenen Form zutreffen bzw. welche sich durch Bearbeitung dieses Dokuments, Verwertung und
Weiterentwicklung der Produkte ändern können. Die Mitteilung des Inhaltes sind unzulässig, soweit nicht
gewünschten Leistungsmerkmale sind nur dann schriftlich gestattet. Alle Rechte für den Fall der
verbindlich, wenn sie bei Vertragsschluss ausdrücklich Patenterteilung, Geschmacks- oder Gebrauchs-
. Eingetragene Marken
SIPROTEC™, DIGSI™, SIGRA™, SIGUARD™,
SAFIR™ SICAM™ und MindSphere™ sind Marken
der Siemens AG. Jede nicht autorisierte
Verwendung ist unzulässig. Alle anderen
Bezeichnungen in diesem Dokument können
Marken sein, deren Verwendung durch Dritte für ihre
eigenen Zwecke die Rechte des Eigentümers
verletzen kann
Dokumentversion E50417-X1150-C520-A9.01
Ausgabe 12/2019
mit dieser DVD-ROM erhalten Sie den IEC 61850 Systemkonfigurator in der aktuellen
Version V6.00.
Der Standard IEC 61850 wurde in Zusammenarbeit von Herstellern und Anwendern als
einheitliche und zukunftssichere Basis für den Schutz, die Kommunikation und Steuerung
von Unterstationen festgelegt.
Installationshinweise
Die Installationshinweise enthalten wichtige Informationen, die Sie für die Installation
des IEC 61850 Systemkonfigurators benötigen. Lesen Sie diese Hinweise bitte vor
Installation der Software.
1.1 Inhalt und Struktur bei Installation der Demo Version von
IEC 61850 Systemkonfigurator
· IEC 61850 Systemkonfigurator Setup (mit Netview, ICD für NTP, und Clients
Edition 1 oder Edition 2) – Demo Version (30 Tage).
Die Open Source Software wird unentgeltlich überlassen. Den Quelltext der Software
können Sie – soweit die einschlägigen Open-Source-Software-Lizenzbedingungen dies
vorsehen – gegen Zahlung der Versandkosten bei Ihrem Siemens Vertriebsbeauftragten
zumindest bis zum Ablauf von 3 Jahren ab Erwerb des Produkts anfordern. Wir haften für
das Produkt einschließlich der darin enthaltenen Open Source Software entsprechend den
für das Produkt gültigen Lizenzbedingungen. Jegliche Haftung für die Nutzung der Open
Source Software über den von uns für das Produkt vorgesehenen Programmablauf hinaus
sowie jegliche Haftung für Mängel, die durch Änderungen der Open Source Software
verursacht wurden, ist ausgeschlossen. Wir leisten keine technische Unterstützung für das
Produkt, wenn dieses geändert wurde.
Hinweis
Wenn Sie den IEC 61850 Systemkonfigurator auf einem Notebook mit
Energie-Management verwenden, empfiehlt Siemens, den IEC 61850
Systemkonfigurator auf diesem Notebook zu verwenden, während es an eine
Steckdose angeschlossen ist. Damit wird ein Stromabfall durch Energiesparmodi des
Notebooks im Akkubetrieb vermieden.
3) 32-Bit: Betriebssystem mit 32-bit Unterstützung (DIGSI 5 kann auf einem 32-bit Betriebssystem weder installiert noch verwendet werden)
Virtuelle Maschinen
Der IEC 61850 Systemkonfigurator unterstützt virtuelle Maschinen der Firma VMWare
(weitere Informationen finden Sie unter http://www.vmware.com).
Hinweis
Wenn Sie mehrere Ethernet-Adapter an Ihrem Rechner verwenden, benötigen Sie
VMWare Workstation, um den richtigen Ethernet-Adapter für den Anschluss von an
die Geräte auszuwählen. Bei nur einem Ethernet-Adapter reicht der kostenlose
VMWare Player aus, um den IEC 61850 Systemkonfigurator zu verwenden.
Die Versionen V4.xx, V5.xx und V6.xx des IEC 61850 Systemkonfigurators können parallel
auf demselben System installiert und verwendet werden.
Hinweis: Die Versionen V4.xx wurden mit DIGSI 4 bis zur Version 4.88 eingeführt.
Die Verwendung des IEC 61850 Systemkonfigurators mit DIGSI 4 und DIGSI 5 auf
demselben System ist möglich.
Ab DIGSI 5 V6.00 ist die Unterstützung des IEC 61850 Systemkonfigurators integriert.
Projekte, die mit DIGSI 5 Versionen kleiner V6.00 erstellt wurden, müssen zuvor
konvertiert werden. Beachten Sie dazu die DIGSI 5 Produktinformation und die
Online-Hilfe.
FASE
Die Verwendung von FASE V2.50 und höher und IEC 61850 Systemkonfigurator V6.00 auf
einem System ist möglich.
ReyDisp Manager
Die Verwendung von ReyDisp Manager und IEC 61850 Systemkonfigurator V6.00 auf
einem System ist möglich.
Die Verwendung von SICAM TOOLBOX II und IEC 61850 Systemkonfigurator V6.00 auf
einem System ist möglich.
SICAM PAS
Die Verwendung von SICAM PAS und IEC 61850 Systemkonfigurator V6.00 auf einem
System ist möglich.
Virenscanner
5 Installation
5.1 Allgemeine Installationshinweise
HINWEIS
Für die Installation des IEC 61850 Systemkonfigurators sind Administratorrechte
erforderlich.
HINWEIS
Die Download-Version von IEC 61850 Systemkonfigurator, die im Internet zur
Verfügung gestellt wird, kann Installationen ab V5.00 und höher aktualisieren. Sie
setzt eine bereits existierende Version von IEC 61850 Systemkonfigurator voraus.
1.) Laden Sie die ZIP Setup Datei von IEC 61850 Systemkonfigurator Download Area.
(http://www.Siemens.com/digsi => IEC 61850 System Configurator => Downloads)
2.) Entpacken Sie die Dateien in einen lokalen Ordner auf Ihrem Rechner. Behalten Sie
dabei die Verzeichnisstruktur wie im ZIP-Archiv vorgegeben bei.
4.) Wählen Sie die Sprache aus, die Sie für die Installation verwenden wollen, und
bestätigen Sie mit OK.
5.) Klicken Weiter.
HINWEIS
Die Kommandozeile kann benutzt werden, um den IEC 61850 Systemkonfigurator als
Standalone-Version ohne DIGSI zu installieren.
2.) Starten Sie die “Setup.exe” entweder über die Kommandozeile oder über ein anderes
Script mit folgenden Parametern:
HINWEIS
Die Parameter wie SYSCONSILENTMODE etc. müssen nicht in Anführungszeichen
gesetzt werden.
Sobald die Silent Installation gestartet ist, können Sie im Task Manager einen Prozess
“Setup.exe” sehen. Wenn die Installation abgeschlossen ist, wird der Prozess beendet.
6 Deinstallation
6.1 Deinstallation der Download-Version über eine existierende
Installation vom IEC 61850 Systemkonfigurator
Mit dem Deinstallationsprogramm von Windows können Sie den IEC 61850
Systemkonfigurator mit allen optionalen Komponenten von Ihrem Rechner entfernen.
Während der Deinstallation entfernt das Installationsprogramm alle installierten
Programmdateien des IEC 61850 Systemkonfigurators. Die benutzerspezifischen Daten,
wie beispielsweise Projekte, bleiben davon unberührt.
7 Benutzungshinweise
Beachten Sie, dass Sie den IEC 61850 Systemkonfigurator pro Lizenz, die Sie erworben
haben, auf maximal 10 PCs installieren dürfen.
Internet
Um auch in Zukunft immer auf dem neuesten Stand zu sein, nutzen Sie das Angebot auf
der Download-Plattform im Internet unter der Adresse
http://www.Siemens.com/digsi => IEC 61850 System Configurator => Downloads
Wenn Sie Interesse an IEC 61850-Kursen haben, wenden Sie sich an Ihren
Vertriebspartner oder das Kursbüro der Siemens Power Academy unter der
Telefonnummer +49 (911) 433-7415.
8 Produktmerkmale
8.1 Neuerungen und Änderungen
1. Schnellere Workflows mit DIGSI 5
IID-Dateien von DIGSI 5 können aktualisiert werden, ohne zuerst den IEC 61850
System Configurator zu schließen und ihn später wieder zu öffnen, um Signale in ein
Dataset aufzunehmen.
Dies verbessert die Performance und die Benutzerfreundlichkeit.
9 Support
Bei Fragen zum IEC 61850 Systemkonfigurator, wenden Sie sich bitte an das Siemens
Customer Support Center.
E-Mail: support.energy@siemens.com
Internet: http://www.siemens.com/energy-support