Beruflich Dokumente
Kultur Dokumente
COC 1
COC 2
1. Design a Diagram for Networking Using Dynamic or Static IP Address with label and legend
- labeled meters of ethernet/utp cable corresponds to actual cable to be created
2. Apply the created diagram
- Attach the server to the patch panel at the back
- Attach the Netbook and Desktop to the switch hub
- Attach the patch panel and the switch hub at the port of the front
3. Configure the network settings
Change adapter settings by changing the sharing options
- Turn on network discovery
- Turn on file and printer sharing
- Turn on sharing
- Turn off password
Change the computer name and Workgroup, make it sure that they have the same Workgroup
Disable the Wi-Fi connection of Netbook and Enable the Ethernet Connection
OVERVIEW:
COC 3
Set-up Server
How to block:
-Click Security and click URL Filter Settings and select Forbid Only
To create folder:
- in Local Disk C: Create new folder namely folder redirection (faith)
- share the created folder by right clicking on it and click properties
and click Advance Sharing
- click share this folder
- select permission and select full control and
click apply and click OK
click apply and click OK
- click share
- select Everyone in arrow down and then click Add
- select Read/Write and click Share
- click Done
- highlight the server path example \\SERVER\folder redirection
- click Close
- Computer properties
- change settings
- Select Remote settings(allow/disallow if cant connect)
- Add remote users
- Select Remote, click 2nd option Allow, and click Select Users
- Click Add button and type the Username of client and click OK
for CLient:
- click Start button
- select Remote Desktop Connection
- in Remote Desktop Connection dialog box type the full computer name of the server /*
example: SERVER.qwerty.ph
- click Connect button
- select other users
- type username and password /* example: username: administrator pw: Css123@
- click OK
- click Yes
- Wait for a while and Start Accessing the Server
COC 4:
In Network Printing:
- Add Roles first
- Open Server Manager
- Select Add Roles
- Select Print and Document Services
- Select Print Server and Click Next
- Click Installed
- if installation succeeded click Close
- install the Printer Driver
- share the installed printer by right clicking the icon in the Devices and Printers, select Printer
Properties
and click OK
- Open Network and find the printer and double click the shared printer /* if not allowed install the
driver first
- Open the shared printer drivers and select setup to install the printer
- Open the shared printer and click try the Test Print
To Restore:
- In Server Manager click Recover
- Click Next
- Click Next
- Click Files and folders and Click Next
- Find the Backup Folder
- Click Printer Drivers
- Click Next
- Select Original Location
- Click Next
- click Recover