Beruflich Dokumente
Kultur Dokumente
(1) Tilt the unit slightly rearwards. Before using the unit:
(2) Fit the unit over the top hat rail. Ensure appropriate installation
(3) Slide the unit downwards until it hits the stop. Warning! Improper installation/operation may impair safety and result in operating
(4) Press against the bottom to lock in place. trouble, or even destruction of the unit.
(5) Shake the unit slightly to make sure it is secure. The unit should only be installed and put into service by appropriately qualified
operators.
Before operating the unit, the following conditions must be checked:
¾ When using flexible cables, all strands must be properly fastened to the terminal
blocks.
¾ The unit must be properly fused.
¾ All output lines must be rated for the power supply output current and must be
connected with the correct polarity.
o
¾ Use a minimum of 80 C wire.
¾ The terminal torque should be 0.5 N-m.
¾ Only use copper wire.
Click
¾ The maximum operating temperature is 45oC.