Beruflich Dokumente
Kultur Dokumente
Assignment 2_Dragon
Shield
Date: Tuesday, June 16, 2020
Designer: Solidworks
Study name: Static 1
Analysis type: Static
Table of Contents
Description...........................................1
Assumptions..........................................2
Model Information..................................2
Study Properties.....................................3
Units..................................................3
Material Properties.................................4
Loads and Fixtures..................................4
Description Connector Definitions..............................5
Download the attached document. Utilizing the equation for Contact Information................................5
Mesh information....................................6
the convection coefficient as the thermal conductivity
Sensor Details........................................7
divided by the material thickness (use 35 mm for avg Resultant Forces....................................7
thickness). Apply convection on all exposed surfaces minus Beams.................................................7
the surface in which heat is applied with an ambient Study Results........................................8
temperature of 20°F (let's give the knight a chance in the Conclusion..........................................10
snow). Apply a temperature of 600°F to the front surface of
the shield. Leave the material as Alloy steel and run the
analysis using blended curvature-based mesh. Utilize the
probe feature to determine the average temperature within
the handles (see attached image for expectations). Create a
static study with fixtures inside the handles and gravity
applied. Insert the results from the thermal study into a
static study and take an image of the minimum factor of
safety(see attached image for expectations). Two images are
required: Average temperature inside holders and factor of
safety from the static study.
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Curve Data:N/A
Resultant Forces
Components X Y Z Resultant
Reaction force(N) 0.09375 1,995.97 -1.0625 1,995.97
Reaction Moment(N.m) 0 0 0 0
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0
Min Max
3.219e-01 1.533e+02
Node: 14507 Node: 9710
Average = 7.681e01