Beruflich Dokumente
Kultur Dokumente
“GI” INSERT TYPE HOLDERS FOR AXIUS, SRX AND SRL RUPTURE DISCS
DESCRIPTION
Fike’s “GI” insert rupture disc holder consists of a base (inlet) and a holddown flange (outlet). “GI” holders
fit between most standard companion flanges within ANSI, JIS, DIN, and ISO bolt circle configurations.
Additionally, 300 series stainless steel sideclips are provided for preassembly so that the rupture disc may
be installed at a workbench or some other convenient location. Once the disc is in place the assembly may
then be installed into the line, minimizing the chance of damage to the rupture disc.
SRX a
SRL a a*
Axius a** a
ATLAS a
* 1.50 IN (DN40) SRL disc not compatible with 1.50 IN (DN40) XL Holder.
** 1.50 IN (DN40) Axius disc not compatible with 1.50 IN (DN40) SRL Holder.
704 SW 10th Street P.O. Box 610 Blue Springs, Missouri 64013-0610 U.S.A.
Phone: 8162293405 www.fike.com
“GI” INSERT HOLDERS FOR SRX, SRL AND AXIUS
Dimensions
SRX XL XLO
Size ANSI 150 ANSI 300 ANSI 600 ANSI 900 ANSI 1500 ANSI 2500
Assembly Assembly Assembly
(IN)
Height Height Height Outside Outside Outside Outside Outside Outside
Diameter Diameter Diameter Diameter Diameter Diameter
.75 1.94 2.13 2.50 2.50 2.63 2.63 2.88
- -
DN20 (49.3) (54.1) (63.5) (63.5) (66.8) (66.8) (73.2)
1 2.13 2.38 2.13 2.50 2.75 2.75 3.00 3.00 3.25
DN25 (54.1) (60.5) (54.1) (63.5) (69.9) (69.9) (76.2) (76.2) (82.6)
1.5 2.13 2.88 2.13 3.25 3.63 3.63 3.75 3.75 4.50
DN40 (54.1) (73.2) (54.1) (82.6) (92.2) (92.2) (92.3) (92.3) (114.3)
2 2.22 3.00 2.06 4.00 4.25 4.25 5.50 5.50 5.63
DN50 (56.4) (76.2) (52.3) (101.6) (108.0) (108.0) (139.7) (139.7) (143)
3 2.22 3.75 2.06 5.25 5.75 5.75 6.50 6.75 7.63
DN80 (56.4) (95.3) (52.3) (133.4) (146.1) (146.1) (165.1) (171.5) (193.8)
4 2.56 4.56 2.44 6.75 7.00 7.50 8.00 8.13 9.13
DN100 (65.0) (115.8) (62.0) (171.5) (177.8) (190.5) (203.2) (206.5) (231.9)
6 2.94 6.00 2.75 8.63 9.75 10.38 11.25 11.00 12.38
DN150 (74.7) (152.4) (69.9) (219.2) (247.7) (263.7) (285.8) (279.4) (314.5)
8 3.22 7.56 3.00 10.88 12.00 12.50 14.00 13.75 15.13
DN200 (81.8) (192.0) (76.2) (276.4) (304.8) (317.5) (355.6) (349.3) (384.3)
10 3.94 9.59 4.03 13.25 14.13 15.63 17.00 17.00 18.63
DN250 (100.1) (243.6) (102.4) (336.6) (358.9) (397) (431.8) (431.8) (473.2)
12 4.56 11.53 4.90 16.00 16.50 17.88 19.50 20.38 21.50
DN300 (115.8) (292.9) (124.5) (406.4) (419.1) (454.2) (495.3) (517.7) (546.1)
14 5.13 17.63 19.00 19.25 20.38 22.63
- - -
DN350 (130.3) (447.8) (482.6) (489) (517.7) (574.8)
16 5.88 20.13 21.13 22.13 22.50 25.13
- - -
(DN400 (149.4) (511.3) (536.7) (562.1) (571.5) (638.3)
18 6.56 21.50 23.38 24 25.00 27.63
- - -
(DN450) (166.6) (546.1) (593.9) (609.6) (635) (701.802)
20 7.31 23.75 25.63 26.75 27.38 29.63
- - -
(DN500) (185.7) (603.3) (651.0) (679.45) (695.5) (752.6)
24 8.75 28.13 30.38
- - - - - -
(DN600) (222.3) (714.5) (771.7)
MATERIALS OF CONSTRUCTION
Holders are available in carbon steel, 316 SST. Examples of other materials available on request are Hastelloy®, Inconel®, and Monel®.
Tantaline Surface Alloy is an available option for certain models and sizes. Please refer to data sheet R.1.48.01 for more information.
RTJ, Tongue and Groove, and other flange faces available upon request.