Beruflich Dokumente
Kultur Dokumente
net/publication/336373483
CITATIONS READS
0 2,145
1 author:
Ramadan Ali
alfanar
13 PUBLICATIONS 0 CITATIONS
SEE PROFILE
Some of the authors of this publication are also working on these related projects:
All content following this page was uploaded by Ramadan Ali on 10 October 2019.
Mfg.
Location
Voltage Class
Main Bus Current Rating
Total Breakers and Types
Total Relays and Types
VISUAL INSPECTION
Yes No
1. General inspection of exterior of equipment.
2. Check panel lights for operation, burned out or missing bulbs LED's and
covers.
3. Inspect for damaged, bent, or twisted doors and verify ground bonding.
4. Inspect for broken instrument, relay cover glass and damaged phase
indicator lights.
5. Inspect bus for physical damage, missing insulation, connections at joints,
confirm plating is acceptable.
6. Check cleanliness of interior of cubicle
7. Inspect insulation, stand-off insulators, and bus separators for damage or
clearance problems.
8. Inspect for proper compartmentalization as required.
Yes No
7. Check rails, guides, rollers, and shutter mechanism.
8. Lubricate draw out assembly parts as required.
9. Inspect breaker and cell primary and secondary contacts and alignment.
10. Close and trip breakers manually in the connected, test and disconnected
positions.
11. When applicable, check metering transformers compartments for proper
operation of racking in/out, isolation features. Check for proper grounding of
fuses in the withdrawn position.
12. Verify that all breakers of the same rating are inter-changeable by racking
each breaker into each cell of the proper rating.