Beruflich Dokumente
Kultur Dokumente
COMPANY PROFILE
Projects 15
Products 28
Material Specification 37
Certificates 47
Office Location 77
3 of 85
Qatar National Aluminium Panel Company (Q-NAP) welcomes you to our world class facility for
manufacturing Aluminium Composite Panels and Coated Aluminium Coils.
A venture that brings about ultimate products with celebrated Far-Eastern technology is now
manufactured independently in the State of Qatar. We are the only plant in the State of Qatar for
manufacturing Aluminium Composite Panels.
Q-NAP is serving local and GCC markets with our Hi-tech products Aluminum Composite Panels,
Corrugated Metal Core Aluminum Composite Panels (Non-combustible), Coated Aluminium Coils and
variety of subsequent products for diverse applications with tailored perfection out of fully automated
machinery.
Hi-Tech installation services for our products, with required perfection, by blending skilled manpower
and latest technology, we offer Aesthetic Architectural Creations by combining our unique products,
cutting-edge technology and quality service.
We are proud member of “National Group” under the wise leadership of vibrant business magnate
with powerful and deep roots in the region, Hon. Sheik Naif Bin Ali Al-Thani (Chairman). Our group
is operating in the industry at our best with an obligation to the society and the nation. We always care
to give a “National Touch” for every task we handle. We are committed to adapt changes in
technology, vision, participation etc. in time; with an aspiration and longing to provide quality products
and services to be an iconic idol.
Direction and visions of leaders with abundant experience in the local and international manufacturing
industry assure effective and exceptional management of committed tasks.
Our internationally acknowledged ‘Quality Management System’ provides committed service with
outstanding quality.
4 of 85
Introduction 2 /4
These days’ creative designers and the government authorities are demanding more improved (ever
flatter, larger, easily fabricated and maintaining stringent fire code requirement) products for the
construction industries especially for the curtain wall system. As a proud member of National Group,
Q- NAP introduced another milestone in the manufacturing Industry in the State of Qatar.
Q-NAP provides State-of-the Art Metal Composite Panels in various sizes and finishes. It is one of the best
designer solutions for architectural needs. A perfect combination Aluminum sheets with PE / Mineral /
Metal Core for specific applications, all products are available in standard as well as customized sizes with
full respect to environment preservation.
MAJOR APPLICATIONS
We offers Aluminum Composite Panels with Non fire rated and fire rated, Corrugated Metal Core
Aluminum Composite Panels (Fire Proof), Stainless Steel Composite Panels and variety of subsequent
products for diverse applications with ultimate perfection out of fully automated machinery, and meeting
the high building material standards.
Q- NAP introduces to the construction Industry, the new generation composite panels “Sinco” for
the building facades. The Corrugated Metal Core Aluminum Composite Panels “Sinco” is a newly
developed composite panel with a corrugated Aluminum core in place of the LDPE or FR core, which gives
a high rigidity. The Sinco product, gives a high temperature resistance, normally from 150˚ C to 180˚ C,
which make the product more suitable for the exterior application in Middle East. The corrugation of the
product gives more flexibility for bending and other fabrication application compared to Honey comb
cladding sheets.
Light weight, Fire safety, 100% Recyclable, high Sound and heat insulations are some of the main
advantages of the Sinco Panels. Sinco is a non-toxic,
non toxic, non hazardous and non volatile and also very efficient
smoke suppressant. Moreover, SINCO is certified as Low emitt
emitting
ing products and materials for general
onstruction materials/ Wall cladding by GREENGUARD Environmental Insti
construction Institute and QSAS (Qatar
Sustainability Assessment System) is recommending SINCO as green product fully recyclable
recyclable. This makes
the SINCO architecture’s choice for the green
gre building, LEED application.
It can be also called as an all-metal
metal composite, having high weight to strength ratio in its class.
Apart from this, Q-NAP
NAP panels are offered in a wide variety of PVDF standard colors suitable for interior
and exterior applications like facades,
facades roofing, ceiling etc, Q-NAP panels are available in PVDF metallic,
solid, wood and stone color series. The PVDF coating gives a very good weather and chemical resistance to
the panels. Custom colors are also available up on request.
A state of art in-house
house coating facility at Qatar is in progress and will be fully operational by year end. This
is the continuous efforts in direction of backward integration, reducing dependency of imports and
delivery delays.
3. Size, structure light weightiness etc of composite panels attributes to reduce the construction
period as it can be installed easily.
4. Metal Composite Panels are economical means of curtain walling when comparing to
traditional and other contemporary methods such as Concrete / Bricks, Metal, Glass etc.
5. Composite panels provide a good aesthetic solution gives architecture a glamorous look in
comparison to customary tactics.
6. Apart from traditional materials Metal Composite Panels are easy to maintain as it can be
cleaned by water and common detergent.
7. Non corrosive metals and toughness of PVDF coating contributes high resistance to natural
climatic / weather effects.
8. Property of flexibility in combination with high strength contributes Composite panels with
easy to shape into complex designs; this flexibility which makes Composite materials a
dream of architects.
9. Composite Panels are highly durable materials, made of highly corrosion resistant metals
and strong abrasion and weather resistive coating PVDF / Polyester. PVDF coated panels have
guarantee minimum 20 years of trouble free life for coating while High grade UV resistant
Polyester Coating assures minimum 10 years life span.
10. Composite Panels envelops the buildings and provides better protection to it than
conventional materials, from external interference of weather etc.
Q-NAP as the foremost plant in the state of Qatar for manufacturing Composite panels is specialized in
producing both LDPE/FR and Corrugated core Composite Panels.
Our products are manufactured by fully automatic state of the art machinery ensures high quality unique
products. Machinery is fully controlled by computerized operating system.
9 of 85
Plant & Machinery 2/6
These testing Equipments are capable to do various Tests relevant in the Industry according to the widely
accepted International Standards & specifications like ASTM. Q-Nap offers international level of quality,
reliability, trust and service to all customers. Quality is ensured at every stage from the input material to the
finished product.
Our objective is to manufacture Quality products meets or exceeds requirements of relevant Industrial
Standard. Strict Quality Control and in-house facilities for Quality Assurance considerably assisted us to
achieve several recognitions.
Fabrication of Aluminum Composite Panels requires common methods such as Cutting, Grooving, Bending, Milling,
Punching, Shearing, Joining, Drilling etc.
RESOURCES
The Plant covering an area of 11621 Square meters, with an average production capacity of above 1,500,000-00
square meters per annum in normal least exploited condition and is extendable. Total Production capacity of the
machine is distributed into Three Types of Items such as Aluminum Composite Panel PE core, FR Core and
Corrugated Metal Core composite panel.
Hi-Tech installation services for our products: with ultimate perfection; by blending skilled manpower
and latest technology. Q-NAP has 59 staff & engineers of well experienced and dedicated for the production
and technical services.
Combining these rich resources and cutting-edge technology, we offer Aesthetic Architectural Creations
with quality to our customers.
10 of 85
Plant & Machinery 3/6
ACP PLANT
11 of 85
Plant & Machinery 4/6
FACTORY
12 of 85
Plant & Machinery 5/6
DEGREASING AREA
DEFLECTO METER
13 of 85
Plant & Machinery 6/6
FINISH PRODUCT
14 of 85
PROJECTS
15 of 85
Projects
17 of 85
Projects
20 of 85
Projects
21 of 85
Projects
AL REFFA TOWER
LUSAIL TOWER
CHILDREN'S MALL
23 of 85
Projects
BUSINESS PARK
24 of 85
Projects
25 of 85
Projects
WOQOD TOWER
26 of 85
Projects
AL DAREEN TOWER
27 of 85
Projects
MARWA TOWER
28 of 85
29 of 85
Q-NAP ACP- FR/PE
MATERIAL SPECIFICATION
30 of 85
ALUMINIUM COMPOSITE PANELS
Q-NAP ACP is the Brand Name of Aluminum Composite Panels manufactured in Qatar by Qatar National Aluminum
Panel Co. (Q-NAP) P.O. Box:37809 Doha – Qatar, our registered office is situated at New Industrial Area, Tel: +974 411
4430 / 411 4892, Fax: +974 411 4891. We are enjoying the position of first and the exclusive manufacturer of Aluminum
and Stainless Steel Composite Panels in the State of Qatar.
Email: info@q-nap.com URL: www.q-nap.com
A. COMPOSITION:
Two sheets of aluminum sandwiching a solid core of extruded thermoplastic /Fire rated mineral Core material
formed in a continuous co-extrusion process with no glues or adhesives between dissimilar materials. The core
material shall be free of voids and/or air spaces and not contain foamed insulation material.
Exterior / Face panel is Aluminum Sheet Coated with PVDF and interior / Rear side of Panel will be available
Mill Finish / Polyester Service Coat / Chromate.
Aluminum Face Sheets:
Aluminum Thickness : 0.50mm (0.0197") (nominal)
Alloy : AA3000 Series (PVDF Painted material)
TYPICAL COMPOSITION OF ALUMINUM COMPOSITE PANEL (DIAGRAMATIC REPRESENTATION)
C. PANEL WEIGHT:
PE: 4mm 5.46 Kgs/m², 6mm: 7.4 Kgs/m²
FR: 4mm 7.5 Kgs/m², 6mm: 10.85 Kgs/m²
D. PRODUCT DIMENSION
Q-NAP ACP is available in various dimensions however our standard size is 4 mm x 1250 mm x 2440 mm.
Other available sizes are as follows:
31 of 85
Dimension Unit Standard Size Available
Width mm 1250 1000 - 2030
Length mm 2440 ≤ 6000
Thickness mm 4 3 & 6
E. TOLERANCES
32 of 85
Q-NAP ACP 4 mm PE 4 mm FR 6 mm PE 6 mm FR
STC 26 db 28 db 26 db 29 db
I. DEFLECTION TEMPERATURE
Q-NAP ACP is having an approximate Deflection Temperature of 221°C. This characteristic proves the
property of ACP to resist boiling water. Kindly note that; recommended heating temperature of and duration
for heating the Panels.
Above chart depicts Vibration damping property in comparison with other materials like Aluminum, Stainless
Steel, Carbon Steel, Led etc.
As seen in the Chart Q-NAP ACP has larger vibration loss than solid metals.
K. MECHANICAL PROPERTIES
Properties of Skin
We are using Alloy 3000 series – H14.
General sheet metal work requiring greater strength than is provided by 1000 series alloys; profiled building
sheet (roofing and siding); insulation panels; holloware; food and chemical handling and storage equipment.
3003 is readily welded by the TIG and MIG processes.
VALUE
MECHANICAL PROPERTY METHOD UNIT
0.2% Proof stress ASTM E8 MPa 152
Flexural Elasticity ASTM E8 GPa 70
L. BENDING LIMIT
We can bend the ACP-FR and PE in a Press Break or 3 roll Bending machine. Normally the smallest
radius which we can apply to bend the panel with out wrinkles at the radial surface of panel is termed as
the bend
33 of 85
radius. In 3 roll machine the bending diameter depends on the roll diameter, length and type of machine for
ACP/FR and PE the radius is about 300mm.
M. THERMAL CONDUCTIVITY
Compared to solid materials, the ACP-PE and ACP-FR panel have a lower thermal conductivity the
table below shows the thermal conductivity comparison of different materials.
N. HEAT TRANSMISSION
Q-Nap ACP-FR and PE panels reduce the Heat transfer from the outer air to the inner air. The air gap
between the Panel and the wall increases the thermal insulation. The heat transmission coefficient (U-
Value) ACP fixed wall system is given below.
75air Gap
100 air Gap
Type of panel Cladding 25mm Glass wool
115mm Brick wall
115mm brick wall
ACP/FR 4mm panel 1.5 W/m²K 0.94 W/m²K
1.32 W/m²K
ACP /FR 6mm panel 0.79 W/m²K
34 of 85
O. REACTION TO FIRE
Q-NAP ACP – FR is a fire safe material passed mandatory requirements of relevant internationally
acceptable standards and is best suitable for external and internal uses. Core of the panels are
mainly composed of minerals which can resist fire, however a small amount of Polyethylene also
included. Main ingredient (minerals) does not permit the proliferation of flame and restricts
development of smoke. Q-NAP ACP – PE on the other hand is composed of Polyethylene
however, Skin Aluminum retard rapid spread of fire.
In addition to regular standard Fire Tests, we are performing heavy fire tests on the Products which are no-
standard as well in order to determine the quality of the products please find below Picture of Typical Ad- Hoc
fire test which we are conducting.
35 of 85
P. COATING FINISHES
®
Aluminum Coil alloy (3003 Series) coated with KYNAR 500 based Polyvinylidene Fluoride (PVDF utilizing with
minimum 70% PVDF resin) for top coat. And mill finished and chromate or Epoxy primer for bottom /rear skin.
PVDF Coating system offers Two or Three Layer coating depending on color selection such as Metallic colors
and Normal RAL Colors. Metallic Colors are normally Three (3) coat system consisting Primer, Color and Clear
Top coat. Normal RAL colors usually have Two (2) coat system composed of inhibitive Primer and Color Coat;
in conformance with the following general requirements of AAMA 2605.
a. Color:
Generally we are manufacturing ACP with various options of color coating; basically we have four
different types of colors such as: Solid / Enamel Colors, Metallic Colors, Natural Finishes (Stone
& Timber) and Sparkling Colors.
d. Color Retention
ASTM D-2244 : Max 5 Units (Accelerated Test 4000 Hrs)
e. Gloss retention :
g. Hardness -Pencil
ASTM D-3363 : 2H
h. Impact:
ASTM D-2784 : No Breakage / Loss of Paint
i. Adhesion:
Dry,ASTM D-3359 : No Pick-off (1 mm x 1mm Cross hatch)
Wet 37.8 o C ,24 hrs. : No Pick off
No Pick off
Boiling water 100 o C,20 min :
j. AbrasionResistance
ASTM D-968 : Passed (Sand Falling / Sand blasting)
k. Humidity Resistance
ASTM D-2247 : 3000 Hrs (RH 100 % at 35°C)
l. Salt Spray Resistance:
ASTM B-117 : 3000 Hrs ( 5% NaCl solution at 35°C)
m. Chemical Resistance:
1) ASTM D-1308 : 10% Muriatic Acid for an exposure of 15 minutes.
No visual change viewed by unaided eye
2) ASTM D-1308 : 20% Sulfuric Acid for an exposure of 18 hours.
36 of 85
No visual change when viewed by unaided eye.
n. Mortar Resistance (AAMA 2605): No Change
o. Detergent Resistance
ASTM D2248-93 : No Change (Detergent, 3% solution, 38ºC, 72hrs)
p. Chalk Resistance
ASTM D 4214 : Max 8 Units (Accelerated Test 4000 Hrs)
q. Weatherability : 15 Years
r. Formability (T Bend) : 2T,No Crack
Q. PANEL STRENGTH
The Panels used for the external cladding must with stand the wind load. This wind load will cause deflection of
the panels and if the deflection is small the panel will not deform. The permanent deformation of the panel is
calculated by 0.2% yield stress divided by the safety factor. In the calculation we are assuming that the total
strength of the panel is the strength of the Aluminium skins. If the calculated 2% proof stress is greater than the
permissible, normally the panel is strengthened by giving additional stiffeners. The other factors affecting the
strength of the panel are:
We are using the Aluminium alloy 3003-H14 for our ACP/PE and FR skins 2% proof stress is 152 MPa and
suitable where the wind speed is 50m/sec. The air infiltration of Q-NAP panels in standard fixing is ≤ 0.3 L/s Per
sq.m at 75 Pa Pressure As per ASTM – E 283 and water penetration test passed according to ASTM E 331 at a
minimum differential pressure of 10 percent of inward acting, wind-load design pressure of not less than 300 Pa
In the installation work other important factors are the strength of the joining holes and the rivets. Normally the
distance from the hole centre to the panel edge should be 2 times larger than hole diameter. And to prevent
the galvanic corrosion of the panels use only Aluminium or stainless steel rivets, bolts nuts etc. if we are using
dissimilar metals lay a coating to prevent the galvanic corrosion.
S. STRENGTH OF SUBSTRUCTURE
The sub structure where we are installing the panels, should take care the wind load and the panels. The
strength of the substructure depends on the material and section of the structure, anchoring intervals of sub
structure and wind pressure. The maximum deflection on the sub structure must be smaller than the 0.5% of
supporting intervals.
a) Lightning
If a lightning strikes, the ACP/FR panel the electricity will be discharged to the earth through the substructure.
Since the panel is connected to the earth through the sub structure.
U. PRODUCT WARRANTY
All Aluminum Composite Panels supplied by Qatar National Aluminum Panel Co. will be warranted for a period
from 10 years from the date of supply, as per our standard product warranty Policy. Formal Warranty
documentation will be issued in the name of Client and will be endorsed by the regional agents / the company
itself.
37 of 85
38 of 85
SINCO- CORRUGATED ALUMINIUM CORE PANELS
Q-NAP SINCO is the Brand Name of Aluminium Composite Panels manufactured in Qatar by Qatar
National Aluminium Panel Co. (Q-NAP) P.O. Box:37809 Doha – Qatar our registered office is situated
at New Industrial Area, Tel: +974 4411 4430 / 411 4892, Fax: +974 4411 4891. We are enjoying the
position of first and the exclusive manufacturer of Aluminium and Stainless Steel Composite Panels in
the State of Qatar.
Email: info@q-nap.com URL: www.q-nap.com
The SINCO is newly developed composite panel which can be used in place of conventional PE, and
FR core panels. This is also applicable in place of Honey comb and solid cladding sheets. The main
advantages of the SINCO are
1. Light weight compared to Solid sheet, PE and FR core
5. Cost effective
A. APPLICATION:
The SINCO is offered in a wide variety of PVDF colors suitable for interior and exterior applications like
wall cladding, roofing facades. SINCO also replaces the brick walls. Because of the good sound and
thermal insulation the SINCO replaces the gypsum board partition and brick walls. SINCO is also used
as a clean room panel and in Automotive Industries.
B. COMPOSITION:
Two sheets of Aluminium sandwiching with corrugated Aluminium core formed in a continuous
lamination process. The core material shall be free of voids and/or air spaces and not contain foamed
insulation material.
Exterior / Surface panel is Aluminium Sheet Coated with PVDF and interior/ rear side or back side of
Panel will be available Mill Finish / Polyester Service Coat / Chromate.
39 of 85
Aluminium Alloy Sheets:
C. COATING FINISHES
®
Aluminium Coil alloy (3003 Series) coated with KYNAR 500 based Polyvinylidene Fluoride (PVDF
utilizing with minimum 70% KDF resin).PVDF Coating system offers Two or Three Layer coating
depending on color selection such as Metallic colors and Normal RAL Colors. Metallic Colors are
normally Three (3) coat system consisting Primer, Color and Clear Top coat. Normal RAL colors
usually have Two (2) coat system composed of inhibitive Primer and Color Coat; in accordance with
the following general requirements of AAMA 2605.
40 of 85
Color:
Generally we are manufacturing SINCO-AL with various options of color coating, basically we have
four different types of colors such as: Solid / Enamel Colors, Metallic Colors, Natural Finishes (Stone
& Timber) and Sparkling Colors.
PVDF: Kynar 500/ Hylar 5000 resin (Fluro Carbon Paint) is the most common coating for the
composite panels; coating is available in various colors & finishes. Typical PVDF Coating - ECCA
(European Coil Coating Association Standard and ASTM)
Quality Standards
Test Type Testing condition Remarks
Polyester PVDF
1
Color 11.By Eye OK With In range OK With In range
2.Color meter ∆ E = 1.0 or less ∆ E = 1.0 or less
Gloss Gloss meter 60 20-70% 25- 80%
D. MATERIALS
E. PRODUCT DIMENSION
Q-NAP SINCO is available in various dimensions however our standard Product size is 4mm x
1250mm x 2500mm
41 of 85
The other available sizes are as follows:
F. TOLERANCES
3. Squareness : 5mm
4. Maximum deviation from panel flatness shall be 3mm in 1500mm on panel in any direction for
assembled units. (Non-accumulative - No Oil Canning)
5. Panel Dimensions: Field fabrication shall be allowed where necessary, but shall be kept to an
absolute minimum. All fabrication shall be done under controlled shop conditions when
possible.
6. Panel lines, breaks, and angles shall be sharp, true, and surfaces free from warp and buckle.
Bond Integrity:
The Top PVDF coated Aluminium skin and the bottom service coated bottom skin bonded
on the core together with an adhesive. This thermosetting adhesive being processed in
high temperature (about 150ºC), so there shall be neither adhesive failure of the bond, a)
between the core and the skin nor, b) cohesive failure of the core itself.
42 of 85
H. COMPARISON WITH OTHER BUILDING MATERIALS
Physical SINCO-
AL 6mm
AL FE S.Steel Concrete Glass Acryl Sht Gypsum
Properties
Specific Gravity 0.78 2.71 7.9 7.9 - 2.5 1.2 0.86
Linear Thermal
1.2m 0.6m
Expansion ( 1m 5.2 mm 0.9mm 0.63mm 0.5mm 3.5mm -
m m
/50°C)
Thermal
Conductivity - 0.449 120 45 17 1.62 1 - 0.04
W/(m.K)
Q-NAP SINCO 21
J. MECHANICAL PROPERTIES
Properties of Skin
Q-NAP SINCO is normally made with Aluminium Alloy 3003-H14 and other grades of Alloy 3000
are available as per customer requirement. General sheet metal work requiring greater strength
than is provided by 1000 series alloys; profiled building sheet (roofing ceiling and siding); insulation
panels; holloware; food and chemical handling and storage equipment. 3003 is readily welded by the
TIG and MIG processes.
Tensile Yield Elongation
Substrate Modulus of Elasticity
Strength(Mpa) Strength(Mpa) 50mm,(%)
AA3003, H14 152 145 Min. 3% 69,000Mpa
AA3105, H14 170 152 Min 2 % 69,000Mpa
SINCO-AL
Mechanical Property Method Unit
6mm
Tensile Strength ASTM E8 MPa 50
43 of 85
K. BENDING LIMIT
We can bend the SINCO in a Press Break or 3 roll Bending machine. Normally the smallest
radius which we can apply to bend the panel with out wrinkles at the radial surface of panel is termed
as the bend radius. In 3 roll machine the bending diameter depends on the roll diameter, length and
type of machine. For 4mm SINCO the diameter is about 300 mm.
L. THERMAL CONDUCTIVITY
Compared to solid materials, the SINCO panel has a lower thermal conductivity. The table
M. HEAT TRANSMISSION
Q-NAP SINCO panels reduce the Heat transfer from the outer air to the inner air. The air gap between
the Panel and the wall increases the thermal insulation. The “U” Value of a SINCO cladding system is
given below
75air Gap
Type of panel 100 air Gap
25mm Glass wool
Cladding 115mm Brick wall
115mm brick wall
1.2 W/m²K
SINCO 6mm panel 0.72 W/m²K
N. FIRE TESTS
Results of Reaction to Fire Tests SINCO
Country Test Standard Result & Classification
BS476 Part 6 Class 0
U.K BS476 Part 7 Class 1
BS476 Part 4 Non combustible
Germany DIN4102 Part 1 Class A2
O. PANEL STRENGTH
The Panels used for the external cladding must withstand the wind load. This wind load will cause
deflection of the panels and if the deflection is small the panel will not deform.
The permanent deformation of the panel is calculated by 0.2% Proof Stress (yield stress) divided by the
safety factor. In the calculation we are assuming that the total strength of the panel is the strength of the
44 of 85
Aluminium skins. If the calculated 2% proof stress is greater than the permissible, normally the panel is
strengthened by giving additional stiffeners. The other factors affecting the strength of the panel are:
1. Panel thickness, width and length
2. Supporting conditions.
3. Wind load
WIND LOAD;
For SINCO 6mm 0.8 mm top skin, 0.3 mm Core and 0.4 mm bottom skin
1,000 W
1,250 W
1,500 W
P. FABRICATION
Q- Nap panels can be easily fabricated by the mechanical processing like saw cutting, bending,
grooving drilling etc. The shear cutting is not recommended for the SINCO panels, all other conventional
type fabrication method can be adopted for the processing of the SINCO
45 of 85
RIVETING
“U” Groove
The SINCO panel has very good fungi and frost resistance. And since the panel is connected to the
earth through the sub structure, if a lightning strikes a SINCO panel the electricity will be discharged to
the earth through the substructure.
R. PRODUCT WARRANTY
All Aluminium Composite Panels supplied by Qatar National Aluminum Panel Co. will be warranted for a
period maximum of 10 Years from the date of supply, as per our standard product warranty Policy.
Formal Warranty documentation will be issued in the name of Client and will be endorsed by the
regional agents / the company itself.
46 of 85
At Qatar National Aluminium Panel Company, we firmly believe that the success of
business depends on providing high quality products and services to all valued
customers through efforts of its team members.
Quality Management is practiced from the top management to the lower most
position in the product realization process.
Quality is ensured at every stage right from the input materials to the finished
product. The four stages of quality assurance are as below:
Pre Production Quality Assurance: All received materials are inspected thoroughly
before issuing to production. Each raw material has ‘Quality Plan' specifying quality
parameters against which the received lot is tested and inspected.
In-process Control: At each stage of production, quality is ensured by vigorous
process control checks. All quality parameters are checked and recorded during
each production run by our experienced quality controllers to ensure production of
high quality product.
Post Production Quality Assurance: At the end of production run, final inspection is
done to ensure that all quality checks are done during the process.
Traceability of the product is also ensured through ‘Batch Code' System, in which
a unique Batch Code is printed on each ACP sheet which traces back to all input
materials used in a production batch.
Pre-dispatch Inspection: At last, before each dispatch from our factory, pre-dispatch
inspection is done to ensure that the customer will always get a high quality product.
47 of 85
CERTIFICATION
AND
ACCREDITATION
48 of 85
49 of 85
><Bar Code
**37925/1
37925 ﺭﻗﻢ ﺍﻟﺘﺴﺠﻴﻞ ﺍﻟﻀﺮﻳﺒﻲ: 37925/1 ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻯ:
ﺍﻟﺴﻤﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ: ﺍﻟﺸﺮﻛﺔ ﺍﻟﻮﻃﻨﻴﺔ ﺍﻟﻘﻄﺮﻳﺔ ﻻﻟﻮﺍﺡ ﺍﻻﻟﻤﻨﻴﻮﻡ ﺍﻷﺳﻢ ﺍﻟﺘﺠﺎﺭﻯ:
19/01/2020 ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺴﺠﻞ: 20/01/2008 ﺗﺎﺭﻳﺦ ﺍﻧﺸﺎﺀ ﺍﻟﺴﺠﻞ:
0 ﺭﺍﺱ ﺍﻟﻤﺎﻝ: ﺷﺮﻛﺔ ﺫﺍﺕ ﻣﺴﺌﻮﻟﻴﺔ ﻣﺤﺪﻭﺩﺓ ﺍﻟﺸﻜﻞ ﺍﻟﻘﺎﻧﻮﻧﻰ:
ﻗﻄﺮ ﺟﻨﺴﻴﺔ ﺍﻟﻤﻨﺸﺄﺓ: ﻧﺸﻂ ﺣﺎﻟﺔ ﺍﻟﺴﺠﻞ:
0 ﻋﺪﺩ ﺍﻟﻔﺮﻭﻉ:
ﻣﻌﻠﻮﻣﺎﺕ ﺍﻻﺗﺼﺎﻝ
+974 ﺃﺭﻗﺎﻡ ﺍﻻﺗﺼﺎﻝ: ﺻﻨﺪﻭﻕ ﺍﻟﺒﺮﻳﺪ:
ﺍﻷﻧﺸﻄﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ
Page 1 of 2
ﺭﻗﻢ ﺍﻟﺴﺠﻞ 1/37925 :
ﺗﺸﻬﺪ ﻏﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭ ﺻﻨﺎﻋﺔ ﻗﻄﺮ ﺑﺎﻥ ﺍﻟﻤﻨﺸﺎﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺍﻋﻼﻩ ﺳﺠﻠﺖ ﻟﺪﻳﻨﺎ 53 of 85
Qatar Chamber certifies that the above mentioned establishment has been registered
><Bar Code
ﺗﺠﺎﺭﺓ ﺍﺟﻬﺰﺓ ﺍﻻﻃﻔﺎﺀ ﻭﺍﻻﻧﺬﺍﺭ ﻭﺍﻟﺴﻼﻣﺔ 2004338 ﺍﺳﺘﻴﺮﺍﺩ ﻣﻮﺍﺩ ﻛﻴﻤﺎﻭﻳﺔ ﻣﺘﻌﻠﻘﺔ ﺑﺎﻟﻤﻨﻈﻔﺎﺕ 2002374
ﺍﻧﺘﺎﺝ ﺳﺘﻴﻞ ﻣﺪﻫﻮﻥ 2005579 )ﻟﻼﺳﺘﻌﻤﺎﻝ ﻷﻏﺮﺍﺽ ﺍﻟﺸﺮﻛﺔ(
ﺗﺠﺎﺭﺓ ﻣﻌﺪﺍﺕ ﺍﻻﻃﻔﺎﺀ ﻭﺍﻻﻧﺬﺍﺭ ﻭﺍﻟﺴﻼﻣﺔ 2004339
Page 2 of 2
ﺭﻗﻢ ﺍﻟﺴﺠﻞ 1/37925 :
ﺗﺸﻬﺪ ﻏﺮﻓﺔ ﺗﺠﺎﺭﺓ ﻭ ﺻﻨﺎﻋﺔ ﻗﻄﺮ ﺑﺎﻥ ﺍﻟﻤﻨﺸﺎﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺍﻋﻼﻩ ﺳﺠﻠﺖ ﻟﺪﻳﻨﺎ 54 of 85
Qatar Chamber certifies that the above mentioned establishment has been registered
55 of 85
ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ 2018-10-15 : ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴــــﺔ
ﻭﻗـﺖ ﺍﻟﻄﺒﺎﻋﺔ 8:27 Õ : ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﻪ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ
ﺭﻗــﻢ ﺍﻟﻄﻠـﺐ PAC18012265 : ﺇﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ
ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﻨﺸﺄﺓ
ﺗﻔﺎﺻﻴﻞ ﺍﻟﺸﻬﺎﺩﺓ
ﺗﻢ ﻣﺮﺍﺟﻌﺔ ﺍﻟﻄﻠﺐ ﺍﻟﻤﻘﺪﻡ ﻭﺍﺗﻀﺢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻣﻦ ﺍﻋﺘﻤﺎﺩ ﺍﻟﻤﻨﺘﺞ /ﺍﻟﻤﻨﺘﺠﺎﺕ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻰ ﺍﻟﻤﺮﻓﻖ ﺑﻨﺎﺀ ﻋﻠﻰ ﺍﻋﺘﻤﺎﺩﻩ ﻣﻦ
ﻗﺒﻞ ﺍﻟﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﺭ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ.
ﻣﻼﺣﻈﺎﺕ :
.1ﻳﺠﺐ ﻋﻠﻰ ﺍﻟﺸﺮﻛﻪ ﺍﻻﻟﺘﺰﺍﻡ ﻭﺍﻟﻌﻤﻞ ﺑﻤﺎ ﺟﺎﺀ ﻓﻲ ﺍﺷﺘﺮﺍﻃﺎﺕ ﻗﺴﻢ ﺃﻧﻈﻤﺔ ﺍﻟﺴﻼﻣﻪ ﺍﻟﺘﻲ ﺗﻢ ﺍﻻﻃﻼﻉ ﻭﺍﻟﻤﻮﺍﻓﻘﺔ ﻋﻠﻴﻬﺎ ﻣﻦ ﺧﻼﻝ ﺍﻟﻤﻮﻗﻊ .
.2ﻳﺠﺐ ﺍﻥ ﻳﻘﻮﻡ ﺑﺘﺮﻛﻴﺐ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ ﻣﻦ ﻗﺒﻞ ﻣﻬﻨﺪﺳﻴﻦ ﻭﻓﻨﻴﻴﻦ ﻣﻌﺘﻤﺪﻳﻦ ﻣﻦ ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ.
.3ﻳﺠﺐ ﺍﻥ ﻳﺤﻤﻞ ﺍﻟﻤﻨﺘﺞ ﺍﻟﻌﻼﻣﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﻟﻠﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻭﺍﻟﻤﻮﺿﺤﻪ ﻓﻲ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ .
ﻉ/
اﻟﻮﺻﻒ اﻟﻤﻮدﯾﻞ
Composite Panel, Mineral Filled Core Sandwiched between two skins of 0.5mm thick
Aluminium Alloy, Nominal Density=7.69-10.85 kg/sq.m., Reaction to Fire Classification=B-s1, ACP-FR
d0, Brand Name: Q-NAP
RECOMMENDATIONS ﺍﻟﺘﻮﺻﻴﺎﺕ
STANDARD: EN 13501-1:2007/A1:2009
/ﻉ
Page 2 of 2 57 of 85
58 of 85
ﺗﺎﺭﻳﺦ ﺍﻟﻄﺒﺎﻋﺔ 2018-11-05 : ﻭﺯﺍﺭﺓ ﺍﻟﺪﺍﺧﻠﻴــــﺔ
ﻭﻗـﺖ ﺍﻟﻄﺒﺎﻋﺔ 8:12 Õ : ﺍﻻﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﻪ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ
ﺭﻗــﻢ ﺍﻟﻄﻠـﺐ PAC18013393 : ﺇﺩﺍﺭﺓ ﺍﻟﻮﻗﺎﻳﺔ
ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﻨﺸﺄﺓ
ﺗﻔﺎﺻﻴﻞ ﺍﻟﺸﻬﺎﺩﺓ
ﺗﻢ ﻣﺮﺍﺟﻌﺔ ﺍﻟﻄﻠﺐ ﺍﻟﻤﻘﺪﻡ ﻭﺍﺗﻀﺢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻣﻦ ﺍﻋﺘﻤﺎﺩ ﺍﻟﻤﻨﺘﺞ /ﺍﻟﻤﻨﺘﺠﺎﺕ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻰ ﺍﻟﻤﺮﻓﻖ ﺑﻨﺎﺀ ﻋﻠﻰ ﺍﻋﺘﻤﺎﺩﻩ ﻣﻦ
ﻗﺒﻞ ﺍﻟﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻮﺿﺤﻪ ﻓﻰ ﺍﻟﺘﻘﺮﺭ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ.
ﻣﻼﺣﻈﺎﺕ :
.1ﻳﺠﺐ ﻋﻠﻰ ﺍﻟﺸﺮﻛﻪ ﺍﻻﻟﺘﺰﺍﻡ ﻭﺍﻟﻌﻤﻞ ﺑﻤﺎ ﺟﺎﺀ ﻓﻲ ﺍﺷﺘﺮﺍﻃﺎﺕ ﻗﺴﻢ ﺃﻧﻈﻤﺔ ﺍﻟﺴﻼﻣﻪ ﺍﻟﺘﻲ ﺗﻢ ﺍﻻﻃﻼﻉ ﻭﺍﻟﻤﻮﺍﻓﻘﺔ ﻋﻠﻴﻬﺎ ﻣﻦ ﺧﻼﻝ ﺍﻟﻤﻮﻗﻊ .
.2ﻳﺠﺐ ﺍﻥ ﻳﻘﻮﻡ ﺑﺘﺮﻛﻴﺐ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ ﻣﻦ ﻗﺒﻞ ﻣﻬﻨﺪﺳﻴﻦ ﻭﻓﻨﻴﻴﻦ ﻣﻌﺘﻤﺪﻳﻦ ﻣﻦ ﺍﻹﺩﺍﺭﺓ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺪﻓﺎﻉ ﺍﻟﻤﺪﻧﻲ.
.3ﻳﺠﺐ ﺍﻥ ﻳﺤﻤﻞ ﺍﻟﻤﻨﺘﺞ ﺍﻟﻌﻼﻣﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ ﻟﻠﻬﻴﺌﻪ ﺍﻟﻤﺨﺘﺒﺮﻳﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻭﺍﻟﻤﻮﺿﺤﻪ ﻓﻲ ﺍﻟﺘﻘﺮﻳﺮ ﺍﻟﻔﻨﻲ ﺍﻟﻤﺮﻓﻖ .
ﻉ/
اﻟﻮﺻﻒ اﻟﻤﻮدﯾﻞ
Composite Panel, Q-NAP SINCO-ALUMINIUM (Brand Name: Q-NAP SINCO), Bulk Area
Q-NAP SINCO-ALUMINIUM
Density: 0.59 kg/sq.m., Rating: Non-Combustible
RECOMMENDATIONS ﺍﻟﺘﻮﺻﻴﺎﺕ
/ﻉ
Page 2 of 2 60 of 85
61 of 85
62 of 85
63 of 85
CERTIFICATE
OF COMPLIANCE
10599-410
Q-NAP Co Certificate Number
UL 2818 - 2013 Standard for Chemical Emissions for Building Materials, Finishes and Furnishings
Products tested in accordance with UL 2821 test method to show compliance to emission limits in UL 2818, Section 7.1.
64 of 85
UL Environment investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL Environment and the Certificate Holder (collectively “Agreement”).
The Certificate Holder is authorized to use the UL Environment Mark for the identified Product(s) manufactured at the production site(s) covered by the ULE Test Report, in accordance with the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with
the Agreement.
CERTIFICATE
OF COMPLIANCE
10599-420
Q-NAP Co Certificate Number
UL 2818 -2013 Standard for Chemical Emissions for Building Materials, Finishes and Furnishings
Product tested in accordance with UL 2821 test method to show compliance to emission limits on UL 2818. Section 7.1 and 7.2.
Building products and Interior finishes are determined compliant in accordance with California Department of Public Health (CDPH) Standard Method V1.1-2010 using the applicable exposure scenario(s).
65 of 85
UL Environment investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL Environment and the Certificate Holder (collectively “Agreement”).
The Certificate Holder is authorized to use the UL Environment Mark for the identified Product(s) manufactured at the production site(s) covered by the ULE Test Report, in accordance with the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with
the Agreement.
Approvals & Appreciation
Letters
66 of 85
67 of 85
68 of 85
69 of 85
Qatar Rail
RA)LJ-rjJl Material Approval Request Review Sheet (Engineer)
Company Mmrngement Systeni
PROJECT: Hamad International AIrport Terminal I Metro Station PROJECT NO.: RTC/153/2015
1 = Action required for this Issue l=lncorporated, ti= evaluated and not Incorporated for reason stated Open/Closed
Comment
No. Initial Page/Section Reviewers Comments (PMC/CPO, CTO) Reply Code D&B Contractor/Other Party Reply Reply Status by
o adverse comments recommended for SONO, based on:
-
RevIewer 2 Name
—.1 /
f-+çtttt’
M013-RnR-ARC-MAR-00130 Rev I
PREPARATION BY CONTRACTOR:
Action Name Signature Role Company Date
Originator Mohammed Aijaz v Material Engineer RnR JV J 4 NOV 201
Emanuele
Engineering Design Manager RnR JV
Scalvini j 4 NOV 201
Rashid
Reviewer
Mohammed Khan
QNQC Manager RnR JV 1 4 NOV 201
Contractor’s
Approval Friedrich Wieser RnR JV 1 4 NOV 201?
Representative
APPROVAL:
~
nR
Employer : Qatar Railways Company
Engineer : JACOBS
Consultant : Cremonesi-Meinhardt Designer JV I' .·'. i , ; 1 Jl
Contractor : RnR
APPROVAL OF MATERIALS
Doc. Ref. No.: M013-RnR-ARC-MAR-00130 Rev 1
Material: Internal Aluminum Composite Panel (M32) Data Sheet: "See Attached Sheets"
14 NOV 2017
Sustainabluty Department Date
Contractor's Representative: