Beruflich Dokumente
Kultur Dokumente
DEPARTMENT OF ED UC ATION
EXPLORATORY COURSE
GRADE 7 / 8
Electrical Installation and Maintenance – Grade 7/8
Alternative Delivery Mode
Quarter 1 – Module 1: Prepare Electrical Materials and Tools
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the
Government of the Philippines. However, prior approval of the government agency or office
wherein the work is created shall be necessary for exploitation of such work for profit. Such
agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks,
etc.) included in this module are owned by their respective copyright holders. Every effort
has been exerted to locate and seek permission to use these materials from their respective
copyright owners. The publisher and authors do not represent nor claim ownership over
them.
Electrical
Installation and
Maintenance
Quarter 1 – Module 1:
Prepare Electrical Materials and Tools
Introductory Message
For the facilitator:
As a facilitator you are expected to orient the learners on how to use this module. You
also need to keep track of the learners' progress while allowing them to manage their
own learning. Furthermore, you are expected to encourage and assist the learners as
they do the tasks included in the module.
What I Need to Know This will give you an idea of the skills or
competencies you are expected to learn in
the module.
This module was designed and written with you in mind. It is here to help you
master Identification Tools and Materials. The scope of this module permits it to
be used in many different learning situations. The language used recognizes the
diverse vocabulary level of students. The lessons are arranged to follow the
standard sequence of the course. But the order in which you read them can be
changed to correspond with the textbook you are now using.
______________1. This is used for griping, holding, cutting electrical wires and
cables
and even small nails. Usually used by linemen in doing heavy tasks.
______________2. Used for cutting and holding fine wires. This can reach
tight space or small opening where other pliers cannot reach and also
used in making terminal loops of copper wires.
______________3. This has a cross tip resembling a positive (+) sign. It is
used to drive screws with cross slot heads.
______________4. This is tools used in driving or pounding and pulling out
nails.
______________5. A tool used for removing insulation of medium sized
wires ranging
from gauge #10 to gauge #16.
______________6. A small drilling machine with a chuck capacity of ¼‖ to
3/8‖. It is used in making holes on metal sheets and concrete walls.
______________7. Comes in either Standard or Philips screw driver with
short shank or blade and shorted handle used to turn screws in tight
space where standard screw driver cannot be used.
______________8. Used by linemen to remove insulation of wire and cables
in low and high voltage transmission lines.
______________9. Is a device inserted to a convenience outlet to conduct
electric
current. A flat cord is attached to it on one end and the other end is
connected to a current consuming instrument or appliance.
______________10. This is a circuit protective device that automatically
blows and cut the current when an over load or short circuit happens.
______________11. This is a rectangular shaped metallic or plastic (PVC)
material in which flush type convenience outlet and switch are attached.
______________12. Are electrical materials used as the passage of wires for
protection and Insulation.
______________13. Are used to attach metallic or non-metallic conduit to
the junction or utility boxes.
What’s In
What is It
Electrical Materials and Tools
Electrical task can be accomplished systematically to save time, effort, and
resources. Most of the work cannot be done using bare hands. To do the task, electrical
tools or equipment are needed to perform the job. This lesson will discuss the
function/use of each tool or equipment used in electrical wiring installations.
The following are common electrical tools and equipment needed in the
installation of electrical wiring.
Metal connector
Flexible non
metallic connector
What’s More
DIRECTION. Given are sets of tasks, prepare a list of electrical tools and materials
for a specific job with corresponding pictures, practice those using appropriate
tools and materials. Your performance will be judged using the following criteria:
Procedure:
1. Analyze the given task given with the procedure given below
2. List down all the necessary tools needed
3. List down the needed materials needed
4. follow procedure and do the task
Guiding question:
What I Can Do
TOOLS
1.
2.
3.
4.
5.
6.
7.
MATERIALS:
PROCEDURE:
Follow procedure on the table below
Its purpose is to relieve the strain on small wires of the cord and binding screws of
convenience outlets and male plug.
For you to make a quality and safe output you have to strictly follow the given
procedure in making an underwriter’s knot. Below is the procedure.
You will be rated by the use of this performance rubric’s.
Materials:
1.
2.
3.
Tools:
1.
Assessment
ACTIVITY :
Name:
Project:
Location:
Classification:
Purpose:
INTRODUCTION
You might be wondering why there are several projects which are not completely
done. Well, there are several reasons why this happens. It might be out of budget or not
properly planned. So, this Lesson will help you achieve the desired quality project.
II. Objective:
a. Demonstrate how to make an extension cord.
b. Observe safety measures while doing the project.
III. Sketch/Drawing:
1.
2.
3.
4.
5.
VI. Procedure:
Answer Key
PRE-TEST ASSESSMENT
1. Combination Pliers 1. Plastic clamp
References
1. Fajardo, Max B. and Fajardo, Leo R. Electrical Layouts and Estimates. 2nd
Edition.
2. K to 12 Basic Education Curriculum Technology and Livelihood Education Learning
Module,2013
3. MELC page: 443 TLE_IAEI7/8UT0a-1
TLE_IAEI7/8UT0a-2