Sie sind auf Seite 1von 4

Wednesday, 1 July 2020 Page 1 of 4

STEELEX INTERNATIONAL

USED ROLLER CONVEYOR AUTOMATIC


BLASTING MACHINE FOR SALE

Contact : Chris Perry

Mobile : +6629289521

Email : chris.perry@steelexinternational.net

Surface Preparation and Painting Equipment Design and Manufacture


www.steelexinternational.net sales@steelexinternational.net
Wednesday, 1 July 2020 Page 2 of 4

STEELEX INTERNATIONAL

STEELEX offer for sale a used Ten Wheel Roller Conveyor Type Automatic Blasting Machine

Built for steel fabricators, oil and gas construction


companies, 2D/3D pipe spool fabricators, PEB
manufacturer's, shipyards and OEM’s blasting larger
sized steel fabrications.

Built in 2016 and used for only 3000 blasting hours


since installation, the machine has been maintained
by Steelex from commissioning to date. The machine
is supplied complete with a good stock of blast wheel
spare parts and abrasive.

All spare parts, service and technical support is


available from Steelex.

Summary Technical Specification


See drawing SI 278 for the General Arrangement

Blasting Capacity : 3.1m wide x 1.6m high


Blast Wheels : 10 x Steelex R370 Direct Drive Unit with 22 kW motor
Inlet Conveyor : 37.3m Long, all driven with 5.9m recovery hopper and spot blast area
Cross Transfers : 3 Legs with 9m storage, pneumatic lift and carry type
Outlet Conveyor : 49.8m Long, all driven with 4.0 recovery hopper
Conveyor Load : 2500 KG per linear metre
Dust Extractor : 20000 CFM (566 m3/min) with emissions below 150 mg/nm3

The conveyor layout, spot blast position, cross transfer position can be modified as required.

Services Required
Power Compressed Air

325 kW 100 CFM

Supply : 400-440 V, 3 Phase, 50 Hz +/- 10%


Control Voltage : 110V

Surface Preparation and Painting Equipment Design and Manufacture


www.steelexinternational.net sales@steelexinternational.net
Wednesday, 1 July 2020 Page 3 of 4

STEELEX INTERNATIONAL

The compressed air supply does not include the blast pots to be used in the spot blasting area.

The machine can be converted for a 60 Hz supply.

Surface Preparation and Painting Equipment Design and Manufacture


www.steelexinternational.net sales@steelexinternational.net
Wednesday, 1 July 2020 Page 4 of 4

STEELEX INTERNATIONAL

Surface Preparation and Painting Equipment Design and Manufacture


www.steelexinternational.net sales@steelexinternational.net

Das könnte Ihnen auch gefallen