Beruflich Dokumente
Kultur Dokumente
APPLICATION
The CJC™ Key Filter insert, KFi is used in the
CJC™ Key Filter unit and is ideal for filtration of
mineral and synthetic based
gear oils
hydraulic oils
FILTRATION CAPABILITY
Particle Removal
All CJC™ Key Filter inserts have the following
filtration degree:
- 3 µm absolute:
98.7% of all solid particles >3 µm
- 0.8 µm nominal:
50% of all solid particles >0.8 µm
are retained in each pass.
The dirt holding capacity of the Key Filter
insert is 2 litres of evenly distributed solids. CJC ™ Key Filter insert, KFi
Degradation Products
Oxidation by-products, resin / sludge, and
varnish are retained by the cellulose material.
The cellulose will retain appr. 1.5 kg of degra-
dation products.
Water Removal
The water absorption potential is up to 50%
(i.e. 1000 ml H20) of the total contaminant
holding capacity.
DIMENSIONS
The figures below are nominal:
Diameter: 15 cm
Height: 36 cm
COMPONENT
The CJC™ Key Filter insert (KFi) consist of several
discs bonded together, based on a new special de-
sign with a unique pattern.
The material is made of 100% natural cellulose fib- Your natural solution
ers from sustainable resources. Only one oil filter is as natural
as the energy you produce
IDENTIFICATION
To order the CJC™ Key Filter insert, KFi, please
use:
Article No: PA5609518