Beruflich Dokumente
Kultur Dokumente
PRODUCT
APPLICATION
EPOFINE® – 4859 / FINEHARD® - 4859 system is suitable for a wide variety of metals,
ceramics and many other substrates such as certain plastics and composites.
SPECIAL FEATURES
PROPERTIES
EPOFINE® – 4859
The joints improve in LSS when kept at 90oC, even in highly humid environment.
PROCESS
The strength and durability of an adhesive joint, to a great extent, is decided by the pre-
treatment of the substrate. Strongest joints are made by mechanically abrading or chemically
etching. The mechanically abraded surfaces shall be further cleaned with a solvent. Minimum
treatment that is required is cleaning by an oil-free solvent like trichloroethylene or
environmentally friendly degreaser such as FINECLEAN – EC.
The resin hardener mix is generally applied using a clean spatula to the pre-treated and dry
substrate. An adhesive layer of 0.05 – 0.10 mm thickness generally imparts the greatest lap
shear strength to the adhesive joint. As soon as the adhesive is applied, clamp the joints with
an even contact pressure.
STORAGE , HANDLING AND DISPOSAL
SAFETY INFORMATION
FITNESS TO USE
Though we have taken adequate care to give you reliable information as above, as exact
conditions of use are beyond our control, we advise that a trial must be done on actual
operation, before starting any large scale production process with our products.
If this document is stamped as “Controlled Copy”, you will automatically receive all future revisions of this.