AUTOMATIC TOLL PAYMENT, ALCOHOL DETECTION,LOAD AND VEHICLE I
NFORMATION USING INTERNET OF THINGS &
MAILING SYSTEM This paper presents the automatic toll payment .alcohol detection,and vehicle information using IOT & mailing system using Micro controller, RFID tags and IR sensors..as we know that the present people face traffic near toll gates during the payment. And also accident rates got increased these days due overspeed and drunken driving..and this system is designed in order to detect drunken drivers, Alcohol sensor(MQ135) is fixed near the driver steering. If the alcohol consumed by the driver exceeds the limit detected by sensors automatically accelerometer reduces the speed. To minimize this, Alcohol Detectors will be installed in vehicles. MQ135 alcoholic sensor is used which would sense alcoholic driver and automatically decelerates and helps to avoid accidents. this system consists of RFID tags, RFID reader and a user interface. RFID tags attached with different objects and RFID reader will track the respective object accordingly.Existing methods uses technologies such as Ultrasonic Sensors, Vision Sensors etc. Here they used ultrasonic sensor which sensing the limited distance from other vehicles, and than sensor will be activated and send location info messages to relatives of the vehicle. This system used Water clustering detection (WCD) method to detect the alcoholic drunken driver by positive or negeative charged water clusters in breath. As we know that tere are three kinds of of RFID tags active, passive and battery assisted tags. Working: In our system we are using RFID tags for reading each vehicle information with the help of RFID reader.because it has the unique identification number which detects the vehicle. IR Sensor is used to detect object which is near, by emitting infrared raditions. In this project we are using Infrared Rays to detect the vehicle which is coming near the toll. When a vehicle approaches the toll IR sensor detects the vehicle and barrier is closed automatically if the load exceeds the limit. Alcohol detector is used to detect the drunken driver. This system is developed wih the help of an embedded kit which will be placed in the vehicle. The load checker fixed at toll gates helps to stop the vehicle which exceeding the load limit. Load cells placed near toll barrier, checks simultaneously with toll payment system. RFID reader has the frequency from 125 kHz, Operating at a supply of 5V. This type of cards are called passive tags because they are active only at time when it arrives near the RFID reader. With a wide range of frequency supply, active RFID sends the information and operates in a wider range. To handle the RFID, the code is embedded in MSP launch microcontroller board using assembly language.conclusion: By implementing this system in the vehicle, a safe journey is possible, which would decrease the accidents and also reduces the accident rate by reducing the speed of the vehicle automatically, if the sensor detects the drunken driver. As future enhancement this RFID tag can be used to store more information about thevehicle and it can be used for investigation to catch the thief in case if the vehicle is stolen. And can also be extended to find the location of the vehicle by collecting the information from the toll gates.