Sie sind auf Seite 1von 8

MG6002N$set device_name

->Please input the device name[MG6002N]:UCZ0001_2_P0018

MG6002N$sav

Save operation successful!

MG6002N$

MG6002N$

MG6002N$

MG6002N$

MG6002N$

MG6002N$set wan
->Please select one interface name to set(
1----DATA
2----VOICE
3----MGMT
4----OTHER1
5----OTHER2)[1]:
->Access mode(0-STATIC IP,1-PPPOE,2-DHCP,3-PPTP,4-L2TP)[0]:
->Vlan Enable[yes]:
->VLAN ID(1-4095)[200]:79
->Priority Level(0-7)[0]:
->Primary DNS(Enter SPACE key to clear)[10.0.0.1]:190.157.8.33
->Secondary DNS(Enter SPACE key to clear)[0.0.0.0]:200.14.207.210
->MTU(512-2042)[1500]:
->IP Address[138.0.60.1]:10.177.240.154
->Netmask[255.255.0.0]:255.255.248.0
->Enable Gateway or not[yes]:
->Gateway[0.0.0.0]:10.177.240.1
->Really want to modify? 'yes' or 'no'[yes]:

The configuration will take effect after saved and reset!

MG6002N$

MG6002N$sav

Save operation successful!

MG6002N$set wan
->Please select one interface name to set(
1----DATA
2----VOICE
3----MGMT
4----OTHER1
5----OTHER2)[1]:2
->Enable or not[yes]:
->Access mode(0-STATIC IP,1-PPPOE,2-DHCP,3-PPTP,4-L2TP)[0]:
->Vlan Enable[yes]:
->VLAN ID(1-4095)[100]:78
->Priority Level(0-7)[7]:
->Primary DNS(Enter SPACE key to clear)[138.0.60.2]:
->Secondary DNS(Enter SPACE key to clear)[138.1.60.1]:
->MTU(512-2042)[1500]:
->IP Address[138.1.60.1]:10.152.187.69
->Netmask[255.255.0.0]:255.255.248.0
->Enable Gateway or not[yes]:
->Gateway[0.0.0.0]:10.152.184.1
->Really want to modify? 'yes' or 'no'[yes]:

The configuration will take effect after saved and reset!

MG6002N$

MG6002N$sav

Save operation successful!

MG6002N$set lan

1----Static IP
2----Multiple Ip List
Select the parameter to configure[1]:2

->0-Add,1-Delete,2-Modify[0]:
->Interface Name[]:LAN
->IP Address[0.0.0.0]:181.49.216.185
->Netmask[0.0.0.0]:255.255.255.252
->Specify ip of accessing internet?[no]:yes
->Enable Processing of Attack Packets to Subnet of PublicLAN?[no]:
->Vlan Enable[no]:
->Enable DHCP Server or not[no]:
->Set advanced parameter[no]:
->Really want to modify? 'yes' or 'no'[yes]:

Operate success!

The configuration will take effect after saved and reset!

MG6002N$

MG6002N$sav

Save operation successful!

MG6002N$

MG6002N$set lan

1----Static IP
2----Multiple Ip List
Select the parameter to configure[1]:
->Interface Name[VLAN1]:
->IP Address[192.168.1.1]:
->Netmask[255.255.255.0]:
->Enable NAT or not[yes]:
Current internet interface:
0--DATA
1--VOICE
6--LAN
15--Customize IP
16--ANY_WAN
->Internet Interface[0]:6
->Enable DHCP Server or not[yes]:
->Start IP[192.168.1.10]:
->End IP[192.168.1.254]:
->Netmask[255.255.255.0]:
->Gateway[192.168.1.1]:
->Primary DNS[200.26.137.135]:190.157.8.33
->Secondary DNS[200.14.207.210]:200.14.205.2
->Lease Time(Second)[86400]:
->Set advanced parameter[no]:
->Really want to modify? 'yes' or 'no'[yes]:

Operate success!

The configuration will take effect after saved and reset!

MG6002N$sav

Save operation successful!

MG6002N$

MG6002N$set qos basi

MG6002N$set qos basic-settings


->Enable QoS? 'yes' or 'no'[yes]:
->Scheduling mode(0: PQ, 1: WRR)[0]:
->QoS Priority(0:DSCP, 1:802.1p)[1]:
->Upstream Bandwidth(Kbps)(0-102400)[0]: 8600
->Downstream Bandwidth(Kbps)(0-102400)[0]: 16600
->Enable Voice Reservation? 'yes' or 'no'[yes]:
->Voice Reservation Bandwidth(Kbps)(0-102400)[96]: 100
->Enable Video Reservation? 'yes' or 'no'[no]:
->Enable Remap ToS/DSCP to CoS? 'yes' or 'no'[no]:
Really want to modify? 'yes' or 'no'[yes]:

MG6002N$

MG6002N$sav

Save operation successful!

MG6002N$set sip

MG6002N$set sipus

MG6002N$set sipuser
+----------------------------------------------------------------------+
|No. |Account Name | Extension |Register Account|Register| Authen User|
+----+-------------+------------+----------------+--------+------------+
| 0 | Phone_001| 700| | no | |
+----+-------------+------------+----------------+--------+------------+
| 1 | Phone_002| 701| | no | |
+----------------------------------------------------------------------+
-> Edit All Ports 'yes' or 'no'[no]:
->Enter the index to modify(0-1)[0]:
->Phone number[700]:5753853045
->Display name(Press SPACE key to clear)[]:
->Register Account[]:5753853045
->Auth User Name(Press SPACE key to clear)[]:5753853045
->Password(Press SPACE key to clear)[******]:3853045UCZ0001
->Enable Register(yes/no)[no]:y
->Really want to modify? 'yes' or 'no'[yes]:

Operate success!

The configuration will take effect after saved and reloaded!

->Set account basic para continue or not?[yes]:no

MG6002N$sav

Save operation successful!

MG6002N$

MG6002N$sh sup

MG6002N$sh super

MG6002N$sh super
Unrecognized Command -- Bad Command name or keyword

MG6002N$supe

MG6002N$sh sip

MG6002N$sh siper

MG6002N$sh siperuset
Unrecognized Command -- Bad Command name or keyword

MG6002N$set sipuser
+----------------------------------------------------------------------+
|No. |Account Name | Extension |Register Account|Register| Authen User|
+----+-------------+------------+----------------+--------+------------+
| 0 | Phone_001| 5753853045| 5753853045| yes | 5753853045|
+----+-------------+------------+----------------+--------+------------+
| 1 | Phone_002| 701| | no | |
+----------------------------------------------------------------------+
-> Edit All Ports 'yes' or 'no'[no]:

->Set account basic para continue or not?[yes]:


+----------------------------------------------------------------------+
|No. |Account Name | Extension |Register Account|Register| Authen User|
+----+-------------+------------+----------------+--------+------------+
| 0 | Phone_001| 5753853045| 5753853045| yes | 5753853045|
+----+-------------+------------+----------------+--------+------------+
| 1 | Phone_002| 701| | no | |
+----------------------------------------------------------------------+
-> Edit All Ports 'yes' or 'no'[no]:

->Set account basic para continue or not?[yes]:

MG6002N$sh sipuser
+----------------------------------------------------------------------+
|No. |Account Name | Extension |Register Account|Register| Authen User|
+----+-------------+------------+----------------+--------+------------+
| 0 | Phone_001| 5753853045| 5753853045| yes | 5753853045|
+----+-------------+------------+----------------+--------+------------+
| 1 | Phone_002| 701| | no | |
+----------------------------------------------------------------------+

->See detail information continue or not?[yes]:no

MG6002N$

MG6002N$

MG6002N$sav

Save operation successful!

MG6002N$reset
Sure to reset? 'yes' or 'no' [no]:u
input data is illegal

MG6002N$reset
Sure to reset? 'yes' or 'no' [no]:y

Se ha perdido la conexi�n con el host.

C:\Users

Welcome to UCZ0001_2_P0018

Password:
Login success!

UCZ0001_2_P0018>en

UCZ0001_2_P0018>enable
Password:
Password:

UCZ0001_2_P0018#en

UCZ0001_2_P0018#enable
Password:
Password:
Password:

UCZ0001_2_P0018$sh tar
UCZ0001_2_P0018$sh target

Target User.....................................:Telmex_Colombia

UCZ0001_2_P0018$sh sip
+-----------------------------------------------------------------------+
|No. | Register Server | Server IP/Domain | Port |Register Cycle |
+----+--------------------+----------------------+------+---------------+
| 0 | SIPServer | 172.31.239.100 | 5060 | 1500 |
+-----------------------------------------------------------------------+

Enable backup server............................:yes


Backup Register server IP or domain.............:172.31.237.100
Backup Register server port.....................:5060
Enable proxy server.............................:no
Enable backup agent register or not.............:no
Local SIP Port(1024-65535)......................:5060
Whether forced to add report....................:yes

UCZ0001_2_P0018$sh sipu

UCZ0001_2_P0018$sh sipuser
+----------------------------------------------------------------------+
|No. |Account Name | Extension |Register Account|Register| Authen User|
+----+-------------+------------+----------------+--------+------------+
| 0 | Phone_001| 5753853045| 5753853045| yes | 5753853045|
+----+-------------+------------+----------------+--------+------------+
| 1 | Phone_002| 701| | no | |
+----------------------------------------------------------------------+

->See detail information continue or not?[yes]:no

UCZ0001_2_P0018$

UCZ0001_2_P0018$sh wan
->Please select one interface name to show(
1----DATA
2----VOICE
3----MGMT
4----OTHER1
5----OTHER2)[1]:

Interface.......................................:DATA
Enable or not...................................:yes
Access mode.....................................:STATIC IP
Vlan Enable.....................................:yes
VLAN ID.........................................:79
Priority Level..................................:0
Primary DNS.....................................:190.157.8.33
Secondary DNS...................................:200.14.207.210
MTU.............................................:1500
IP Address......................................:10.177.240.154
Netmask.........................................:255.255.248.0
Enable Gateway or not...........................:yes
Gateway.........................................:10.177.240.1
UCZ0001_2_P0018$

UCZ0001_2_P0018$sh wan
->Please select one interface name to show(
1----DATA
2----VOICE
3----MGMT
4----OTHER1
5----OTHER2)[1]:2

Interface.......................................:VOICE
Enable or not...................................:yes
Access mode.....................................:STATIC IP
Vlan Enable.....................................:yes
VLAN ID.........................................:78
Priority Level..................................:7
Primary DNS.....................................:138.0.60.2
Secondary DNS...................................:138.1.60.1
MTU.............................................:1500
IP Address......................................:10.152.187.69
Netmask.........................................:255.255.248.0
Enable Gateway or not...........................:yes
Gateway.........................................:10.152.184.1
UCZ0001_2_P0018$sh lan

1----Static IP
2----Multiple Ip List
Select the parameter to show[1]:1

Interface Name..................................:VLAN1
IP Address......................................:192.168.1.1
Netmask.........................................:255.255.255.0
Enable NAT or not...............................:yes
Internet interface..............................:LAN
Enable DHCP Server or not.......................:yes
Start IP........................................:192.168.1.10
End IP..........................................:192.168.1.254
Netmask.........................................:255.255.255.0
Gateway.........................................:192.168.1.1
Primary DNS.....................................:190.157.8.33
Secondary DNS...................................:200.14.205.2
Lease Time(Second)..............................:86400
Binding LAN Port................................:LAN1 LAN2 LAN3 LAN4
Binding WAN Subinterface........................:DATA VOICE MGMT OTHER1 OTHER2
UCZ0001_2_P0018$sh lan

1----Static IP
2----Multiple Ip List
Select the parameter to show[1]:2

LAN multiple IP list:


+---+----------------+----------------+---+----+----+---+
|No |IP |Mask |NAT|VLAN| VID|PRI|
+---+----------------+----------------+---+----+----+---+
|0 |181.49.216.185 |255.255.255.252 |No |No |0 |0 |
+---+----------------+----------------+---+----+----+---+

->Input the ID to show detail(0-0)[0]:

Interface Name..................................:LAN
IP Address......................................:181.49.216.185
Netmask.........................................:255.255.255.252
Specify ip of accessing internet................:yes
Enable Processing of Attack Packets to Subnet of PublicLAN?:no
Vlan Enable.....................................:no
Enable DHCP Server or not.......................:no
Binding LAN Port................................:LAN1 LAN2 LAN3 LAN4
Binding WAN Subinterface........................:DATA VOICE MGMT OTHER1 OTHER2

->Continue show or not[yes]:no

UCZ0001_2_P0018$sh qos bas

UCZ0001_2_P0018$sh qos basic-settings


->Enable QoS......................................: Enable
->Scheduling mode.................................: PQ
->QoS Priority....................................: 802.1P
->Upstream Bandwidth(Kbps)........................: 8600
->Downstream Bandwidth(Kbps)......................: 16600
->Enable Voice Reservation........................: Enable
->Voice Reservation Bandwidth(Kbps)...............: 100
->Enable Video Reservation........................: Disable
->Enable Remap ToS/DSCP to CoS....................: Disable

UCZ0001_2_P0018$

Das könnte Ihnen auch gefallen