Beruflich Dokumente
Kultur Dokumente
Scope
1) [I] This Global Practice (GP) contains requirements governing:
a) The type, content, and structure of all computer aided drafting (CAD) drawings to be supplied as
part of the project documents.
b) The content of a Drawing Index listing all CAD and other drawings supplied as part of the project
documentation.
2) [I] An asterisk (*) indicates additional information is required. If a job is contracted this additional
information is furnished in the Job Specification.
Table of Contents
Table of Tables .............................................................................................................. 3
4. Symbol Sets........................................................................................................... 5
6. Layering Conventions........................................................................................... 6
7. Drawing Index...................................................................................................... 12
Table of Tables
Table 1: Drawings to be Supplied in CAD Format ..................................................... 4
1. Required References
This Section lists Practices and Standards that are generically referenced and assumed to be a part of this
document. Unless otherwise specified herein, use the latest edition.
2. Definitions
Term [I] Description
Drawing Type
Piping Isometrics
Electrical
Loop Diagrams
Logic Diagrams
3) [I] Computer aided drafting files shall be provided in native AutoCAD DWG format, based on
Release 12, except where Item 5) of this Section applies. Drawings may be provided based on later
releases of the AutoCAD product or on a non-AutoCAD product with approval by the Owner's
Engineer. In the case where CAD drawings originate in a non-AutoCAD system, Contractor shall
demonstrate the conversion to AutoCAD DWG format is 100 percent effective in retaining the
drawing content, except where Item 5) of this Section applies.
4) * [I] Intermediate drawing formats such as DXF are not acceptable unless agreed as part of the Job
Specification.
5) * [I] For ExxonMobil sites that currently use Intergraph CAD systems, files may be provided in an
Intergraph format as agreed with the Owner's Engineer and documented as part of the Job
Specification.
4. Symbol Sets
[I] Drawing symbol sets are defined in GP 01-01-01. Line weights not covered by GP 01-01-01 shall be
covered in this GP.
5. Naming Conventions
* [I] Naming conventions for drawings, process units, equipment, and instrumentation shall follow GP
01-01-01.
6. Layering Conventions
1) * [I] Computer aided drafting files shall be prepared with the information layered according to the
conventions given for the type of drawing in Table 3 of this GP, or as amended by the Job
Specification.
2) * [I] Layer names shall follow the standard names given in Table 3 of this GP, or as amended by the
Job Specification.
3) * [I] The layering standard provides separate layers for standard text and title blocks, and for most
drawings standard line weights and types. These layers typically have default colors and default line
types. Only standard AutoCAD line types and default colors shall be used unless other line types and
default colors are agreed with the Owner's Engineer and documented as part of the Job Specification.
4) [I] Where the original source drawing system is not AutoCAD, Contractor shall demonstrate that the
conversion to AutoCAD DWG files will produce the correct layering as required by this GP with the
exception of Item 5) below.
5) [I] If the original drawing system is Intergraph, and the users system is a compatible Intergraph
system; then the requirement for conversion to AutoCAD DWG files may be waived by the Owners
Engineer as part of the Job Specification.
Table 3
General Layers - Applicable to All Drawings
Layer Name Default Color Default Linetype Application
Piping and Instrument Diagrams
EQUIP GREEN Continuous Process Equipment: Vessels, Pumps, Symbols
INSTR CYAN Continuous Instrument Lines and Symbols
MFL RED Continuous Major Process Flow Lines
SFL MAGENTA Continuous Secondary Process Flow Lines
SYMBOL CYAN Continuous Piping and Miscellaneous Symbols
MUL RED Continuous Main Utility Lines
SUL MAGENTA Continuous Secondary Utility Lines
INSTRSYM CYAN Continuous Instrument Symbols
INSTRLINE CYAN Continuous Instrument Lines
INSTRSOFT WHITE Dash/Circle Instrument Software Link
EQUIPMAIN YELLOW Continuous Major Process Equipment Outline (Vessels, Compressors, Fired
Heaters, Reactors)
BOUNDARY RED Phantom Boundary Around Package or Separate Systems
BOX MAGENTA Continuous Drawing Continuation Blocks
Electrical: Single Line, Schematic and Wiring Diagrams
BUS RED Continuous Bus Linework, Single Line Diagrams
FEEDER YELLOW Continuous Motor Feeder Cable, Single Line Diagrams
CWIRE GREEN Continuous Single Line Diagram Control Wiring
SWIRE GREEN Hidden Single Line Diagram Signal Wiring
FWIRE GREEN Continuous Field Wiring, Schematics & Wiring Diagrams
SYMBOL CYAN Continuous Symbols
IWIRE MAGENTA Hidden Internal Wiring, Schematics & Wiring Diagrams
Loop Diagrams and Logic Diagrams
CABLE MAGENTA Continuous Control Room and Field Cable
INSTRSYM CYAN Continuous Instrument Symbols and Terminal Blocks
INSTRWIRE CYAN Dashed Instrument Field Wiring
INSTRSOFT WHITE Dash/Circle Instrument Software Link
EQUIPMAIN YELLOW Continuous Equipment and Process Lines
Table 3
General Layers - Applicable to All Drawings
Layer Name Default Color Default Linetype Application
Plot Plans
Basemap
BLDGS Continuous Buildings, Substations, etc.
BLDGTXT Continuous Building Text
BLDGSYM Continuous Building Symbols
BERMS Continuous Berms and Dykes
BERMTXT Continuous Berm Text
FENCE Continuous Fences & Gates
FENCETXT Continuous Fence Text
PONDS Continuous Ponds, Basins, etc.
PONDTXT Continuous Pond Text
PROP-LINE Phantom Property Lines
PROP-LINETXT Continuous Property Line Text
RAILROAD Continuous Railways
RAILROADTXT Continuous Railway Text
ROADS Continuous Roadways, Parking
ROADTXT Continuous Road Text
TANKS Continuous Tankage
TANKTXT Continuous Tankage Text
BATLIM Phantom Battery Limits
BATLIMTXT Continuous Battery Limits Text
Table 3
General Layers - Applicable to All Drawings
Layer Name Default Color Default Linetype Application
Plot Plans - Service Layers
Water
BFW Continuous Boiler Feed Water Lines
BFWTXT Continuous Boiler Feed Water Text
BFWSYM Continuous Boiler Feed Water Symbols
CW Continuous Cooling Water Lines
CWTXT Continuous Cooling Water Text
CWSYM Continuous Cooling Water Symbols
DW Continuous Domestic Water Lines
DWTXT Continuous Domestic Water Text
DWSYM Continuous Domestic Water Symbols
FW Continuous Firewater Lines
FWTXT Continuous Firewater Text
FWSYM Continuous Firewater Symbols: Hydrants, Monitors, etc.
SW Continuous Service Water Lines
SWTXT Continuous Service Water Text
SWSYM Continuous Service Water Symbols
Sewers
SAN Continuous Sanitary Sewers
SANTXT Continuous Sanitary Sewer Text
SANSYM Continuous Sanitary Sewer Symbols
SC Continuous Contaminated Sewers: Chemical, Phenolics, Caustic, etc.
SCTXT Continuous Contaminated Sewer Text
SCSYM Continuous Contaminated Sewer Symbols
SO Continuous Clean Water Sewer
SOTXT Continuous Clean Water Sewer Text
SOSYM Continuous Clean Water Sewer Symbols
SR Continuous Surface Run Off Sewer: Storm, Firewater, etc.
SRTXT Continuous Surface Run Off Sewer Text
SRSYM Continuous Surface Run Off Sewer Symbols
Table 3
General Layers - Applicable to All Drawings
Layer Name Default Color Default Linetype Application
Plot Plans - Service Layers
Electrical/Instrument
PWR Continuous Power and Lighting Linework: Conduits, etc.
PWRTXT Continuous Power and Lighting Text
PWRSYM Continuous Power and Lighting Symbols
INST Continuous Instrument Linework: Conduits, etc.
INSTTXT Continuous Instrument Text
INSTSYM Continuous Instrument Symbols
EHT Continuous Electrical Heat Tracing Linework
EHTTXT Continuous Electrical Heat Tracing Text
EHTSYM Continuous Electrical Heat Tracing Symbols
DBANK Continuous Underground Electrical Ductbanks
DBANKTXT Continuous Underground Electrical Ductbank Text
DBANKSYM Continuous Underground Electrical Ductbank Symbols
ACLASS Continuous Area Classification Linework
ACLASSTXT Continuous Area Classification Text
ACLASSSYM Continuous Source of Release Symbols
Table 3
General Layers - Applicable to All Drawings
Layer Name Default Color Default Linetype Application
Plot Plans - Service Layers
Structural, Civil and Equipment
EQUIP Continuous Process Equipment
EQUIPTXT Continuous Process Equipment Text
EQUIPSYM Continuous Process Equipment Symbols
FDTN Continuous Foundations
FDTNTXT Continuous Foundations Text
FDTNSYM Continuous Foundations Symbols
PLATFORM Continuous Platforms
PLATFORMTXT Continuous Platforms Text
PLATFORMSYM Continuous Platforms Symbols
STAIRS Continuous Stairways
STAIRSTXT Continuous Stairways Text
STAIRSSYM Continuous Stairways Symbols
LOADRACK Continuous Loading Racks
LOADRACKTXT Continuous Loading Racks Text
LOADRACKSYM Continuous Loading Racks Symbols
PIPERACK Continuous Piperacks
PIPERACKTXT Continuous Piperacks Text
PIPERACKSYM Continuous Piperacks Symbols
Table 3
General Layers - Applicable to All Drawings
Layer Name Default Color Default Linetype Application
Plot Plans - Service Layers
Others
BD Continuous Flare and Blowdown Lines
BDTXT Continuous Flare and Blowdown Text
BDSYM Continuous Flare and Blowdown Symbols
EASEMENT Continuous Easements and Rights of Way
EASEMENTTXT Continuous Easements and Rights of Way Text
LANDSCAPE Continuous Linework
LANDSCAPETXT Continuous Text
LANDSCAPESYM Continuous Trees, Shrubs, etc.
SURVEY Continuous Contours and Other Linework
SURVEYTXT Continuous Coordinates, Elevations, etc.
SURVEYSYM Continuous Monuments, etc.
General Drawings
CONST DK GREY Continuous Construction Lines (non-plotting)
DIM WHITE Continuous Dimensions Light
SYMBOL CYAN Continuous All Miscellaneous Symbols
HATCH WHITE Continuous Hatching
7. Drawing Index
1) [I] Upon completion of the project, Contractor shall provide a Drawing Index of all supplied
drawings.
2) * [I] This index shall contain the information given in Table 4 for each drawing (as appropriate). See
the Job Specification for any amendments to the requirements of Table 4.
3) * [I] The index shall be supplied in a form suitable for use in the Owner’s indexing system. This
format shall be specified as part of the Job Specification.
Record of Change
Version 1.0.0 Date: 01/02
Location Action Description
Initial Publish.
Operational Safety: Refers to the prevention and control of process releases, fires, explosions,
etc.