(References to replacement methods are S E I listed at the end of the table.) 06109 06124 06139 Transporter read sensor error 1. Confirm that there are no foreign (when moving to press down objects between the push plate and position 2) the frame, and remove if there are any. Transporter read sensor did not 2. Confirm if there is enough grease on go OFF when the push plate unit was moving from the read position the drive shaft, nut, or transporter to the press down position. motor unit, and apply grease if it is not enough. 3. Confirm following and replace the faulty parts. • Transporter read sensor • Sensor wire: JP47 ~ MCN4 (MDU) • Transporter motor • Motor wire: JP52 ~ MCN6 (MDU) • MDU 06110 06125 06140 Transporter motor control error 1. Confirm the ground. (It may cause (when moving to press down noise) position 2) 2. Confirm that the antistatic brush right There was a trouble with the motor under the insertion slot has not fallen off. control when the push plate unit was moving from the read position 3. Confirm following and replace the to the press down position. faulty parts. 06111 06126 06141 Transporter motor control error • Ground wire of transporter unit (when moving to HP pass (if it is not broken) position) • Transporter motor There was a trouble with the motor control when the push plate • Motor wire: unit was moving from the read JP52 ~ MCN6 (MDU) position to the HP pass position. • MDU 06112 06127 06142 Transporter HP sensor error 1. Confirm that there are no foreign (when moving to HP 2) objects between the push plate and Transporter HP sensor did not the frame, and remove if there are any. go ON when the push plate unit 2. Confirm if there is enough grease on was moving from the HP pass position to the home position, the drive shaft, nut, or transporter when it was trying to move from motor unit, and apply grease if it is not the press down position to the enough. home position. 3. Confirm following and replace the faulty parts. • Transporter HP sensor • Sensor wire: JP46 - MCN4 (MDU) • Transporter motor • Motor wire: JP52 - MCN6 (MDU) • MDU