Beruflich Dokumente
Kultur Dokumente
IS 781 : 1984 Specification for cast copper alloy screw down bib taps and stop valves for water services
IS 805 : 1968 Code of Practice for Use of Steel in Gravity Water Tanks
IS 1172 : 1993 Code of Basic Requirements for Water Supply, Drainage and Sanitation
IS 1194 : 1960 Forms for Recording Measurement of Flow of Water in Open Channels
IS 1200 : Part XIX : 1981 Method of Measurement of Building and Civil Engineering Works- Part XIX :
Water Supply, Plumbing and Drains
IS 1536 : 2001 Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage -Specification
IS 1537 : 1976 Vertically cast iron pressure pipes for water, gas and sewage
IS 1538 : 1993 Cast iron fittings for pressure pipes for water, gas and sewage
IS 1703 : 2000 Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) -Specification
IS 1710 : 1989 Specification for Pumps - Vertical Turbine Mixed and Axial Flow, for Clear Cold Water
IS 1711 : 1984 Specification for self-closing taps for water supply purposes
IS 1795 : 1982 Specification for Pillar Taps for Water Supply Purposes
IS 2401 : 1973 Code of practice for selection, installation and maintenance of domestic water meters
IS 3004 : 1979 Specification for plug cocks for water supply purposes
IS 3025 : Part 1 : 1987 Methods of Sampling and Test (Physical and Chemical for Water and Wastewater
- Part 1 : Sampling
IS 3025 : Part 3 : 1987 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater
- Part 3 : Precision and Accuracy
IS 3025 : Part 4 : 1983 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 4 : Colour
IS 3025 : Part 5 : 1983 Methods of sampling and test (physical and chemical) for water and wastewater :
Part 5 Odour
IS 3025 : Part 6 : 1983 Methods of sampling and test (physical and chemical) for water and wastewater :
Part 6 Odour threshold
IS 3025 : Part 7 : 1984 Methods of sampling and test (physical and chemical) for water and
wastewater : Part 7 Taste threshold
IS 3025 : Part 8 : 1984 Methods of sampling and test (physical and chemical) for water and wastewater :
Part 8 Taste rating
IS 3025 : Part 9 : 1984 Methods of sampling and test (physical and chemical) for water and wastewater :
Part 9 Temperature
IS 3025 : Part 10 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 10 : Turbidity
IS 3025 : Part 11 : 1983 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 11 : pH Value
IS 3025 : Part 12 : 1983 Methods of Sampling and Test (physical and chemical) for Water and Waste
Water - Part 12 : Density
IS 3025 : Part 14 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 14 : Specific Conductance (Wheatstone Bridge,
Conductance Cell)
IS 3025 : Part 15 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste
Water - Part 15 : Total Residue (total solids - dissolved`and suspended)
IS 3025 : Part 16 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste
Water - Part 16 : Filterable Residue (total dissolved solids)
IS 3025 : Part 17 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste
Water - Part 17 : Non-filterable Residue (total suspended solids)
IS 3025 : Part 18 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste
Water - Part 18 : Volatile and Fixed Residue (total, filterable and non-
filterable)
IS 3025 : Part 19 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 19 : Settleable Matter
IS 3025 : Part 20 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 20 : Dispersion Characteristics (Flow Patterns)
IS 3025 : Part 21 : 1983 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 21 : Total Hardness
IS 3025 : Part 22 : 1986 Methods of Sampling and Test (Physical and Chemical) for Water and Waste
Water - Part 22 : Acidity
IS 3025 : Part 23 : 1986 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 23 : Alkalinity
IS 3025 : Part 24 : 1986 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 24 : Sulphates
IS 3025 : Part 25 : 1986 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 25 : Chlorine Demand
IS 3025 : Part 26 : 1986 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 26 : Chlorine, Residual
IS 3025 : Part 27 : 1986 Methods of sampling and test (physical and chemical) for water and wastewater-
Part 27 : Cyanide
IS 3025 : Part 28 : 1986 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 28 : Sulphites
IS 3025 : Part 29 : 1986 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 29 : Sulphide
IS 3025 : Part 30 : 1988 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 30 : Bromide
IS 3025 : Part 31 : 1988 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 31 : Phosphorus
IS 3025 : Part 32 : 1988 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 32 : Chloride
IS 3025 : Part 33 : 1988 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 33 : Iodide
IS 3025 : Part 34 : 1988 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 34 : Nitrogen
IS 3025 : Part 35 : 1988 Methods of Sampling and Test ( Physical and Chemical) for Water and
Wastewater - Part 35 : Silica
IS 3025 : Part 36 : 1987 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 36 : Ozone, Residual
IS 3025 : Part 37 : 1988 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 37 : Arsenic
IS 3025 : Part 38 : 1989 Water and Wastewater - Methods of Sampling and Test (physical and chemical) -
Part 38 : Dissolved Oxygen
IS 3025 : Part 39 : 1991 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 39 : Oil and Grease
IS 3025 : Part 40 : 1991 Water and Wastewater - Methods of Sampling and Test (physical and chemical) -
Part 40 : Calcium
IS 3025 : Part 41 : 1992 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 41 : Cadmium
IS 3025 : Part 42 : 1992 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 42 : Copper
IS 3025 : Part 43 : 1992 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 43 : Phenols
IS 3025 : Part 44 : 1993 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 44 : Biochemical Oxygen Demand (BOD)
IS 3025 : Part 45 : 1993 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 45 : Sodium and Potassium
IS 3025 : Part 46 : 1994 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 46 : Magnesium
IS 3025 : Part 47 : 1994 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 47 : Lead
IS 3025 : Part 48 : 1994 Methods of Sampling and Test (physical and chemical) for Water and
Wastewater - Part 48 : Mercury
IS 3025 : Part 49 : 1994 Methods of Sampling and Test (Physical and Chemical) for Water and
Wastewater - Part 49 : Zinc
IS 3076 : 1985 Specification for Low Density Polyethylene Pipes for Potable Water Supplies
IS 4038 : 1986 Specification for foot valves for water works purposes
IS 4346 : 1982 Specification for washers for use with fittings for water services
IS 4984 : 1995 Specification for high density polyethylene pipes for potable water supplies
IS 5312 : Part 1 : 1984 Specification for Swing Check Type Reflux (Non-Return] Valves for Water Works
Purposes - Part 1 : Single-Door Pattern
IS 5312 : Part 2 : 1986 Specification for Swing Check Type Reflux (non-return) Valves for Water Works
Purpose - Part 2 : Multi-Door Pattern
IS 5531 : 1988 Cast iron specials for asbestos-cement pressure pipes for water, gas and sewage
IS 5822 : 1994 Code of Practice for Laying of Electrically Welded Steel Pipes for Water Supply
IS 6163 : 1978 Centrifugaly cast (spun) iron low pressure pipes for water, gas and sewage
IS 6295 : 1986 Code of practice for water supply and drainage in high altitudes and/or subzero
temperature regions
IS 6595 : Part 1 : 2002 Horizontal Centrifugal Pumps for Clear, Cold Water - Specification - Part 1 :
Agricultural and Rural Water Supply Purposes
IS 6595 : Part 2 : 1993 Horizontal centrifugal pumps for clear, cold water: Part 2 General purposes other
than agricultural and rural water supply - Specification
IS 6784 : 1996 Method for performance testing of water meters (domestic type)
IS 7181 : 1986 Horizontally cast iron double flanged pipes for water, gas and sewage
IS 7634 : Part 1 : 1975 Code of practice for plastic pipes work for potable water supplies: Part 1 Choice of
materials and general recommendations
IS 7634 : Part 2 : 1975 Code of practice for plastics pipe work for potable water supplies: Part 2 Laying
and jointing polyethylene (PE) pipes
IS 7834 : Part 1 : 1987 Specification for injection moulded PVC fittings with solvent cement joints for
water supplies: Part 1 General requirements
IS 7834 : Part 2 : 1987 Specification for injection moulded PVC fittings with solvent cement joints for
water supplies: Part 2 Specific requirements for 45 degrees elbows
IS 7834 : Part 3 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints
for water supplies: Part 3 Specific requirements for 90 degree elbows
IS 7834 : Part 4 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints
for water supplies: Part 4 Specific requirements for 90 degree tees
IS 7834 : Part 5 : 1987 Specification for Injection Moulded PVC Socket Fittings With Solvent Cement
Joints for Water Supplies - Part 5 : Specific Requirements for 45ø Tees
IS 7834 : Part 6 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints
for water supplies: Part 6 Specific requirements for sockets
IS 7834 : Part 7 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints
for water supplies: Part 7 Specific requirements for unions
IS 7834 : Part 8 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints
for water supplies: Part 8 Specific requirements for caps
IS 8008 : Part 1 : 2003 Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for
Potable Water Supplies - Specification - Part 1 : General Requirements for
Fittings
IS 8360 : Part 1 : 1977 Specification for fabricated high density polyethylene (HDPE) fittings for potable
water supplies: Part 1 General requirements
IS 8360 : Part 2 : 1977 Specification for fabricated high density polyethylene (MDPE) fittings for potable
water supplies, Part 2 Specific requirements for 90 tees
IS 8360 : Part 3 : 1977 Specification for fabricated high density polyethylene (HDPE) fittings for potable
water supplies, Part 3 Specifc requirements for 90 bends
IS 8931 : 1993 Specification for copper alloy fancy single taps, combination tap assembly and stop valves
for water services
IS 9222 : Part 1 : 1990 Recommendation for handling and dosing devices for chemicals for water
treatment: Part I Coagulants
IS 9338 : 1984 Specification for cast iron screw-down stop valves and stop and check valves for water
works purposes
IS 9542 : 1980 Horizontal centrifugal monoset pumps for clear, cold, fresh water
IS 9739 : 1981 Specification for pressure reducing valves for domestic water supply systems
IS 10124 : Part 1 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part I General
requirements
IS 10124 : Part 2 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 2
Specific requirements for sockets
IS 10124 : Part 3 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 3
Specific requirements for straight reducers
IS 10124 : Part 4 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 4
Specific requirements for caps
IS 10124 : Part 5 : 1988 Specification for fabricated PVC fittings for potable water supplies: part 5
Specific requirements for equal tees
IS 10124 : Part 6 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 6
Specific requirements for flanged tail piece with metallic flanges
IS 10124 : Part 7 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 7
Specific requirements for threaded adaptors
IS 10124 : Part 8 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 8
Specific requirements for 90 degree bends
IS 10124 : Part 9 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 9
Specific requirements for 60 degree bends
IS 10124 : Part 10 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 10
Specific requirements for 45 degree bends
IS 10124 : Part 11 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 11
Specific requirements for 30 dgree bends
IS 10124 : Part 12 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 12
specific requirements for 22 1/2 degree bends
IS 10124 : Part 13 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 13
Specific requirements for 11 1/4 degree bends
IS 10261 : 1982 Requirements for settling tank (clarifier equipment) for waste water treatment
IS 10313 : 1982 Requirements for settling tank (clarifier equipment) for water treatment plant
IS 11346 : 2002 Tests for Agricultural and Water Supply Pumps - Code of Acceptance
IS 12183 : Part 1 : 1987 Code of practice for plumbing in multi-storeyed buildings: Part 1 Water supply
IS 12235 : Parts 1 to 11 : 1986 Methods of Test for Unplasticized PVC Pipes for Potable Water Supplies
IS 12701 : 1996 Specification for rotational moulded polyethylene water storage tanks
IS 12709 : 1994 Specification for glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for
potable water supply
IS 12742 : 1989 Guide for Defluoridation of Water for Drinking Purposes (Chemical Treatment Method)
IS 12918 : 1990 Guide for Removal of Iron from Water for Rural Drinking Water Supply (Chemical
Treatment Method)
IS 13114 : 1991 Specification for forged brass gate, globe and check valves for water works purposes
IS 13356 : 1992 Specification for precast ferrocement water tanks up to 10000 litres capacity
IS 14359 : 1996 Echo Sounders for Water Depth Measurement - Functional Requirements
IS 14399 : Parts 1 and 2 : 1996 Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin
(GRP) Sectional Water Storage Tanks
IS 14402 : 1996 Specification for GRP pipes joints and fittings for sewerage, industrial waste and water
(other than potable)
IS 14845 : 2000 Resilient Seated Cast Iron Air Relief Valves for Water Works Purposes - Specification
IS 14846 : 2000 Sluice Valve for Water Works Purposes (50 to 1200 mm Size) - Specification
IS 14961 : 2001 Guidelines for Rain Water Harvesting in Hilly Areas by Roof Water Collection System
IS 15185 : 2002/ISO 9308-1 : 2000 Water Quality - Detection and Enumeration of Escherichia Coli and
Coliform Bacteria - Memberane Filtration Method
IS 15186 : 2002/ISO 7899-2 : 2000 Water Quality - Detection and Enumeration of Intestinal Enterococci -
Memberane Filtration Method
IS 15188 : 2002/ISO 8199 : 1988 Water Quality - General Guide to the Enumeration of Micro-Organisms
by Culture
SP 35 : 1987 Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing)
SP 57 (QAWSM) : 1993 Handbook on Pipes and Fittings for Drinking Water Supply