Beruflich Dokumente
Kultur Dokumente
MFA Cassette
Description
The Munters MFA Cassette has been designed and engineered
to meet the demands of those industries where robust corrosion
free construction, long service life and performance are essential
requirements for critical plant procurement.
Principle of Operation
Air passing through the CELdek® or GLASdek pads is
humidified and cooled due to intensive contact between the air and
the wetted unheated pad surface. The increase in humidity occurs
through evaporation alone without the need for additional energy
input. Only a small amount of water is consumed. The water
connected to the mains water supply is distributed over the top
and falls by gravity through the CELdek® or GLASdek pad and is Air passing through CELdek® rigid
collected by the sump of the AHU or re quires a separate gutter evaporative media pad is both cooled and
and drain, as in the Munters HUMIduct (MHD) duct mounted humidified.
evaporative humidifier.
The MFA Cassettes are supplied fully assembled and are ideally
suited for use in air handling units. The MFA unit is supplied
complete with water flow control valve, water distribution system,
and water inlet solenoid valve.
Operation (Cont’) Applications include:
The housing is constructed of • All HVAC Humidification
high-grade stainless steel and Systems
includes side flanges for ease of • Archive and Museum
attachment to support structures. humidification Retrofit to
Typically, the MFA Cassette is TEK existing Air Handling Units
screwed to the trailing (air off) flange • Winter humidification
of the cooling coil, using the drip
• Summer cooling
tray to collect the water that drops
from the bottom of the unit. • New Air Handling Units
• Commercial Buildings
If space restrictions make • Thermoplastic industry
installation of the MFA on the
• Small automotive paint booths
cooling coil difficult, a Munters
HUMIduct unit may be simply • Textile industry
installed in ductwork, as seen on • Printing factories
right. • Mushroom growing
Ordering Information
Standard Code: MFA–60–XXXX–XXXX
SATURATION
EFFICIENCY: WIDTH:
40 = 40% Width (mm)
60 = 60%
75 = 75%
Albury Head Office, 21 Union Road, North Albury, NSW, 2640, Tel: (02) 6025 6422, Fax: (02) 6025 8266
Sydney Sales Office, Unit 2, 148 James Ruse Drive, Parramatta, NSW, 2150, Tel: (02) 8843 1588, Fax: (02) 8843 1589
Melbourne Sales Office, Hallmarc Business Park, Unit D8, 2A Westall Road Clayton, VIC, 3168, Tel: (03) 8545 7600, Fax: (03) 8543 5428
Brisbane Sales Office, Unit 27, 115 Robinson Road, Geebung, QLD, 4034. Tel: (07) 3265 8800, Fax: (07) 3265 1478
New Zealand Sales Office, Unit 3, 47 Turama Road, Royal Oak, Auckland, 1023, Tel: +64 9 524 0543
Munters reserves the right to make alterations to specifications, quantities, etc., for production or other reasons subsequent to publication.