Beruflich Dokumente
Kultur Dokumente
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Make exploded view and save it. 5. Make drawing for one selected
part and save it. 6. Assume all missing data. 7. All dimensions in millimeters.
Q1: Robot
1-8
2-8
3-8
50 marks
4-8
Q2:
5-8
6-8
7-8
50 marks
8-8
University of Technology
Mechanical Engineering Department
Final Term Examination 2014/2015
Subject: CAD Year: 3rd year
Division: General Mechanical Engineering Exam Time: 3 Hrs.
Examiner(s): CAD Group Date: 18 / 6 / 2015
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Make exploded view and save it. 5. Make drawing for one selected
part and save it. 6. Assume all missing data. 7. All dimensions in Inches.
1-8
2-8
3-8
50 marks
Q2: Launcher
4-8
5-8
6-8
7-8
50 marks
8-8
University of Technology
Mechanical Engineering Department
Final Term Examination 2014/2015
Subject: CAD Year: 3rd year
Division: Air Conditioning and Refrigeration & Automotive Engineering Exam Time: 3 Hrs.
Examiner(s): CAD Group Date: 14 / 6 / 2015
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Make exploded view and save it. 5. Make drawing for one selected
part and save it. 6. Assume all missing data. 7. All dimensions in Inches.
Q1:
1-8
2-8
3-8
50 marks
4-8
Q2: Hand Truck
5-8
6-8
7-8
50 marks
8-8
University of Technology
Mechanical Engineering Department
First Term Examination 2014/2015
Subject: CAD (Solidworks) Year: 3rd year
Divisions: Air Conditioning and Refrigeration & Automotive Engineering Exam Time: 1.5 Hrs.
Examiner(s): CAD Group Date: 20 / 1 / 2015
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data. 5. All dimensions in millimeters.
Q1: Drawer
1-6
2-6
3-6
15 marks
Q2: Universal Joint
4-6
5-6
6-6
15 marks
University of Technology
Mechanical Engineering Department
First Term Examination 2014/2015
Subject: CAD (Solidworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: 1.5 Hrs.
Examiner(s): CAD Group Date: 18 / 1 / 2015
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data. 5. All dimensions in millimeters.
Q1: Gearbox
1-6
2-6
3-6
15 marks
4-6
5-6
6-6
15 marks
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 19 / 11 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data. 5. Dimensions in Millimeters.
Q1.
1-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 19 / 11 / 2014
2-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 19 / 11 / 2014
50 marks
3-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 19 / 11 / 2014
Q2.
4-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 19 / 11 / 2014
5-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 19 / 11 / 2014
50 marks
6-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data.
Q1.
1-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
Thickness = 3
Fillet = R10
Thickness = 7
2-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
Fillet = R2
3-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
Thickness = 5
50 marks
4-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
Q2.
5-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
6-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
7-8
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 22 / 9 / 2014
8-8 50 marks
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 18 / 6 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in
figures below. 3. Make all possible mates. 4. Assume all missing data.
1-5
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 18 / 6 / 2014
2-5
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 18 / 6 / 2014
50 marks
3-5
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 18 / 6 / 2014
4-5
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 18 / 6 / 2014
50 marks
5-5
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 11 / 6 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in
figures below. 3. Make all possible mates. 4. Assume all missing data.
1-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 11 / 6 / 2014
2-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 11 / 6 / 2014
50 marks
3-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 11 / 6 / 2014
Q2.
4-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 11 / 6 / 2014
5-6
University of Technology
Department of Machines and Equipment Engineering
Final Year Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: Hrs.
Examiner(s): Dr. Nabil Noor, Dr. Nabeh Natic and Dr. Laith Jaafer Date: 11 / 6 / 2014
50 marks
6-6
University of Technology
Department of Machines and Equipment Engineering
Second Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: 10 / 4 / 2014
1-2
2-2
University of Technology
Department of Machines and Equipment Engineering
Second Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: 2 / 4 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data.
Q1:
1-6
2-6
3-6
Q2:
4-6
5-6
6-6
University of Technology
Department of Machines and Equipment Engineering
Second Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: 30 / 3 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data.
Q1:
1-6
2-6
3-6
Q2:
4-6
5-6
6-6
University of Technology
Department of Machines and Equipment Engineering
Second Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: Air Conditioning and Refrigeration & Automotive Engineering Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: 8 / 3 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data.
Q1:
1-6
2-6
3-6
Q2:
4-6
5-6
6-6
University of Technology
Department of Machines and Equipment Engineering
First Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: All Divisions Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: / 1 / 2014
1-4
2-4
3-4
4-4
University of Technology
Department of Machines and Equipment Engineering
First Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: General Mechanical Engineering Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: 21 / 1 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data.
Q1:
1-6
2-6
Q2: Neglect threads and bolts.
3-6
4-6
5-6
6-6
University of Technology
Department of Machines and Equipment Engineering
First Term Examination 2013/2014
Subject: CAD (Soildworks) Year: 3rd year
Division: Air Conditioning and Refrigeration & Automotive Engineering Exam Time: 1.5 Hrs.
Examiner(s): Dr. Nabeh Natic, Dr. Nabil Noor and Dr. Laith Jaafer Date: 4 / 1 / 2014
Notes: 1. Answer ( one ) question only. 2. Draw an assembly for the parts shown in figures below.
3. Make all possible mates. 4. Assume all missing data.
Q1:
1-4
Fillet = R5
2-4
Q2:
3-4
All Fillets = 0.125
4-4