Beruflich Dokumente
Kultur Dokumente
Logging Program:
- Surface Casing section (12-1/4" hole) : None
- Production casing section (8-1/2" hole) : Triple Combo (schlumberger)
Drilling Hazard
- No fault on surrounding well
- Possibility of having Loss Circulation @ R5
-
Remarks:
-
-
-
TD -661 727
727 ft
MUD PROGRAM
8-1/2" hole Remarks:
Mud type DIF 1. Mud Engineer do full mud check before re-use the old mud from last well (Report to DSM & DE)
Mud Density 8.6 - 9.0 ppg 2. If the Mud System is re-used from previous well, reduce the MW as low as possible using
Funnel Visc 40 - 55 sec/qt centrifuge (to reduce solid and MW), to dilute with fresh mud to get desired properties
PV ALAP please disscussed with Drilling Office (DE)
YP 15 - 25 lb/100 sq.ft 3. Please make sure that Centrifue running during drilling
API Filtrate < 8 cc/30min 4. When all Solid Control Equipment already Hook Up, Centrifuge must be run to reduce amount of
K+ 13 - 15K mg/l solid content
LGS < 6% 5. When finish drilling intermediate section Centrifuge must be run to reduce amount of solid content
pH 9 - 9.5 6. Control ROP and keep potassium ion as per program to prevent gumbo while drilling shale formation.
BS
DISP TOTAL DC BHA + KELLY DOWN 38,3 293
NO DESC TYPE CONN OD IN ID IN BBLS / FT BBL/FT WT/FT W.T DP LENGTH CUMLT. TOTAL DP DP (DP+DC BHA) + KD
1 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 1287.37 31.43 31.43 225.61 263.91
2 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 2565.3248 31.20 62.63 256.81 295.11
3 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 3843.2768 31.20 93.83 288.01 326.31
4 5" DP 4-1/2 IF 5.00 3.25 0.010261 0.0140 36.96 4993.8416 31.13 124.96 319.14 357.44
5 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 6292.2736 31.70 156.66 350.84 389.14
6 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 7545.6496 30.60 187.26 381.44 419.74
7 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 8819.5056 31.10 218.36 412.54 450.84
8 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 10101.554 31.30 249.66 443.84 482.14
9 5" DP 4-1/2 IF 5.00 3.25 0.010261 0.0140 36.96 11258.402 31.30 280.96 475.14 513.44
10 5" DP 4-1/2 IF 5.00 2.75 0.007347 0.0169 44.64 12679.739 31.84 312.80 506.98 545.28
11 5" DP 4-1/2 IF 5.00 3.25 0.010261 0.0140 36.96 13833.63 31.22 344.02 538.20 576.50
12 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 15136.158 31.80 375.82 570.00 608.30
13 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 16423.531 31.43 407.25 601.43 639.73
14 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 17660.523 30.20 437.45 631.63 669.93
15 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 18872.939 29.60 467.05 661.23 699.53
16 5" DP 4-1/2 IF 5.00 3.00 0.008743 0.0155 40.96 20153.758 31.27 498.32 692.50 730.80
KELLY UP 3.80
WEIGHT BHA + DP IN MUD X 85% 27,938.72 LBS KELLY DOWN 34.50
MAXIMUM WOB 11,182.97 LBS POINT DEPTH 727.00 727
Joint Length Cumm Collar Length Joint Length Cumm Collar Length Joint Length Cumm Collar Length
no feet Length depth CTR no feet Length depth CTR no feet Length depth CTR
F/S 1.40 727.00 9 39.15 364.78 401.37
Cut 8.00 9.40 725.60 10 39.35 404.13 362.22 X
F/C 1.52 10.92 717.60 11 39.32 443.45 322.87
1 39.32 50.24 716.08 X 12 39.35 482.80 283.55
2 39.15 89.39 676.76 13 39.33 522.13 244.20 X
3 39.31 128.70 637.61 14 39.33 561.46 204.87
4 39.45 168.15 598.30 X 15 39.44 600.90 165.54
5 39.40 207.55 558.85 16 39.43 640.33 126.10 X
6 39.33 246.88 519.45 17 39.37 679.70 86.67
7 39.30 286.18 480.12 X 18 39.38 719.08 47.30
8 39.45 325.63 440.82 MARKER 10.23 729.31 7.92
729.31 -2.31
314.71 393.45 0.00
Unit Price
Description Received Used Price Excess Remark
($)
CSG 7" 23 PPF, K-55 BTC R-3 21 Jts 18 Jts $ 484.55 $ 8,721.90
CSG 7" 23 PPF, K-55 BTC R-1 3 Jts 1 Jts $ 240.79 $ 240.79
CENTRALIZER 7" 6 EA 6 EA $ 42.00 $ 252.00
STOPPER 7" 6 EA 6 EA $ 26.00 $ 156.00
7" Float Collar 1 EA 1 EA $ 490.00 $ 490.00
7" FLOAT SHOE 1 EA 1 EA $ 490.00 $ 490.00