Beruflich Dokumente
Kultur Dokumente
MATERIALS
fcu 30 N/mm² gm 1.15 steel Cover 30 mm
fy 500 N/mm² gm 1.5 concrete h agg 20 mm
steel class A
SECTION
h 400 mm
b 400 mm X X SINGLE AXIS
with 3 bars per face BENDING
All bars in 400 wide faces
BAR ARRANGEMENTS
Type Bar Ø Asc % Link Ø Bar c/c Nbal (kN) Nuz (kN) Checks
H 32 3.02 8 146.0 1113.7 4177.4 ok
H 25 1.84 8 149.5 1104.4 3385.1 ok
H 20 1.18 6 154.0 1106.9 2938.3 ok
H 16 0.75 6 156.0 1105.8 2652.3 ok
H 12 0.42 6 158.0 1106.2 2429.9 ok
H 10 0.00 6 159.0 0.0 0.0 < 0.4% - ignored
N:M INTERACTION CHART for 400 x 400 column, grade C30, 30 mm cover and 3 bars on
400 mm faces
4500
2 KEY
4000
6H32
3500
AXIAL COMPRESSION, N, kN
6H25
3000 3000
6H20
2500
6H16
2000
1850
6H12
1500 1500
500 500 2
0
0 50 100 150 MOMENT250
200 Mx 300 350 400 450
kNm
LOADCASES Load case N (kN) Mx' (kNm) Load case N (kN) Mx' (kNm)
A1 top 500 200 6 H20 4 1500 150 6 H16
A1 bot 1850 100 6 H16 5 1000 150 6 H12
A2 bot 3000 50 6 H25 6 1000 50 6 H12
Project Spreadsheets to BS 8110
Location Columns at A1, A2 etc CALCULATIONS I
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Originated from 'RCC52.xls' v3.1 on CD © 2006 TCC Date 4-Sep-20
CALCULATIONS
32 Bar diameter
d' = 54 mm d= 346 mm Asc = 4825.5 mm²
N=0 quadratic a = 4824.000 b = 607570.69 c = -9E+07
n max = 913.2 Interval = 5.497 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 88.26 93.76 99.25 104.75 110.25 115.74 121.24 126.74 132.23 137.73 143.23 148.72 154.22 159.72 165.21 170.71 176.21 181.70
Fc Conc comp force 425764 452281 478797 505313 531830 558346 584862 611379 637895 664412 690928 717444 743961 770477 796993 823510 850026 876542
c strain Steel comp strain 0.00136 0.00148 0.00160 0.00170 0.00179 0.00187 0.00194 0.00201 0.00207 0.00213 0.00218 0.00223 0.00227 0.00232 0.00236 0.00239 0.00243 0.00246
t strain Steel tens strain 0.01022 0.00942 0.00870 0.00806 0.00748 0.00696 0.00649 0.00606 0.00566 0.00529 0.00496 0.00464 0.00435 0.00408 0.00383 0.00359 0.00337 0.00316
fsc Steel comp stress 258.32 283.43 305.76 325.74 343.73 360.02 374.82 388.34 400.74 412.15 421.38 421.38 421.38 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 623255 683837 737709 785928 829338 868625 904349 936975 966888 994414 1016688 1016688 1016688 1016688 1016688 1016688 1016688 1016688
Fst Steel tens force 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019 1049019
z Conc lever arm 306.28 303.81 301.34 298.86 296.39 293.92 291.44 288.97 286.49 284.02 281.55 279.07 276.60 274.13 271.65 269.18 266.71 264.23
N Fc + Fsc - Fst 0.00 87.10 167.49 242.22 312.15 377.95 440.19 499.34 555.76 609.81 658.60 685.11 711.63 738.15 764.66 791.18 817.70 844.21
M MOR 312.39 324.37 335.24 345.15 354.22 362.56 370.26 377.36 383.94 390.04 395.25 397.07 398.75 400.31 401.74 403.03 404.20 405.23
Labels for chart
N diff 87.10 80.39 74.73 69.93 65.80 62.24 59.14 56.43 54.04 48.79 26.52 26.52 26.52 26.52 26.52 26.52 26.52 26.52
M diff 11.98 10.87 9.91 9.08 8.34 7.69 7.11 6.58 6.10 5.20 1.82 1.69 1.56 1.43 1.29 1.16 1.03 0.90
25 Bar diameter
d' = 50.5 mm d= 349.5 mm Asc = 2945.2 mm²
N=0 quadratic a = 4824.000 b = 370831.72 c = -5E+07
n max = 922.5 Interval = 6.253 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 72.33 78.58 84.83 91.09 97.34 103.59 109.85 116.10 122.35 128.61 134.86 141.12 147.37 153.62 159.88 166.13 172.38 178.64
Fc Conc comp force 348909 379075 409242 439408 469574 499741 529907 560073 590240 620406 650572 680739 710905 741071 771238 801404 831571 861737
c strain Steel comp strain 0.00106 0.00125 0.00142 0.00156 0.00168 0.00179 0.00189 0.00198 0.00206 0.00213 0.00219 0.00225 0.00230 0.00235 0.00239 0.00244 0.00247 0.00251
t strain Steel tens strain 0.01341 0.01207 0.01092 0.00993 0.00907 0.00831 0.00764 0.00704 0.00650 0.00601 0.00557 0.00517 0.00480 0.00446 0.00415 0.00386 0.00360 0.00335
fsc Steel comp stress 197.85 236.75 269.91 298.51 323.44 345.37 364.79 382.12 397.69 411.73 421.38 421.38 421.38 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 291361 348638 397470 439597 476312 508594 537200 562725 585641 606329 620537 620537 620537 620537 620537 620537 620537 620537
Fst Steel tens force 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270 640270
z Conc lever arm 316.95 314.14 311.32 308.51 305.70 302.88 300.07 297.25 294.44 291.63 288.81 286.00 283.18 280.37 277.56 274.74 271.93 269.11
N Fc + Fsc - Fst 0.00 87.44 166.44 238.73 305.62 368.06 426.84 482.53 535.61 586.46 630.84 661.01 691.17 721.34 751.50 781.67 811.84 842.00
M MOR 197.70 210.25 221.37 231.31 240.27 248.41 255.82 262.60 268.82 274.54 279.12 281.41 283.53 285.47 287.25 288.86 290.30 291.57
Labels for chart
N diff 87.44 79.00 72.29 66.88 62.45 58.77 55.69 53.08 50.85 44.37 30.17 30.17 30.17 30.17 30.17 30.17 30.17 30.17
M diff 12.55 11.12 9.94 8.96 8.13 7.41 6.78 6.22 5.72 4.58 2.29 2.12 1.95 1.78 1.61 1.44 1.27 1.10
20 Bar diameter
d' = 46 mm d= 354 mm Asc = 1885.0 mm²
N=0 quadratic a = 4824.000 b = 2.37E+05 c = -3E+07
n max = 934.3 Interval = 6.951 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 58.44 65.39 72.35 79.30 86.25 93.20 100.15 107.10 114.05 121.00 127.96 134.91 141.86 148.81 155.76 162.71 169.66 176.61
Fc Conc comp force 281933 315465 348998 382530 416063 449596 483128 516661 550194 583726 617259 650791 684324 717857 751389 784922 818455 851987
c strain Steel comp strain 0.00075 0.00104 0.00127 0.00147 0.00163 0.00177 0.00189 0.00200 0.00209 0.00217 0.00224 0.00231 0.00237 0.00242 0.00247 0.00251 0.00255 0.00259
t strain Steel tens strain 0.01770 0.01545 0.01363 0.01212 0.01087 0.00979 0.00887 0.00807 0.00736 0.00674 0.00618 0.00568 0.00523 0.00483 0.00445 0.00411 0.00380 0.00352
fsc Steel comp stress 135.64 194.21 241.52 280.53 313.26 341.11 365.09 385.95 404.28 420.49 421.38 421.38 421.38 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 127840 183036 227625 264397 295241 321484 344085 363752 381021 396307 397144 397144 397144 397144 397144 397144 397144 397144
Fst Steel tens force 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773 409773
z Conc lever arm 327.70 324.57 321.44 318.32 315.19 312.06 308.93 305.80 302.68 299.55 296.42 293.29 290.16 287.04 283.91 280.78 277.65 274.52
N Fc + Fsc - Fst 0.00 88.73 166.85 237.15 301.53 361.31 417.44 470.64 521.44 570.26 604.63 638.16 671.69 705.23 738.76 772.29 805.83 839.36
M MOR 131.76 145.10 156.60 166.68 175.64 183.68 190.95 197.55 203.58 209.10 212.18 214.92 217.45 219.77 221.88 223.78 225.47 226.95
Labels for chart
N diff 88.73 78.12 70.30 64.38 59.78 56.13 53.20 50.80 48.82 34.37 33.53 33.53 33.53 33.53 33.53 33.53 33.53 33.53
M diff 13.34 11.49 10.08 8.96 8.04 7.27 6.61 6.03 5.51 3.08 2.74 2.53 2.32 2.11 1.90 1.69 1.48 1.27
16 Bar diameter
d' = 44 d= 356 mm Asc 1206.4 mm²
N=0 quadratic a = 4824.000 b = 1.52E+05 c = -2E+07
n max = 939.6 Interval = 7.428 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 48.28 55.71 63.14 70.56 77.99 85.42 92.85 100.27 107.70 115.13 122.56 129.99 137.41 144.84 152.27 159.70 167.12 174.55
Fc Conc comp force 232904 268736 304567 340398 376229 412061 447892 483723 519555 555386 591217 627048 662880 698711 734542 770374 806205 842036
c strain Steel comp strain 0.00031 0.00074 0.00106 0.00132 0.00153 0.00170 0.00184 0.00196 0.00207 0.00216 0.00224 0.00232 0.00238 0.00244 0.00249 0.00254 0.00258 0.00262
t strain Steel tens strain 0.02231 0.01887 0.01624 0.01416 0.01248 0.01109 0.00992 0.00893 0.00807 0.00732 0.00667 0.00609 0.00557 0.00510 0.00468 0.00430 0.00396 0.00364
fsc Steel comp stress 48.66 133.72 198.76 250.11 291.68 326.02 354.87 379.44 400.63 419.08 421.38 421.38 421.38 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 29350 80656 119891 150865 175939 196653 214053 228874 241652 252781 254172 254172 254172 254172 254172 254172 254172 254172
Fst Steel tens force 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255 262255
z Conc lever arm 334.27 330.93 327.59 324.25 320.90 317.56 314.22 310.88 307.53 304.19 300.85 297.51 294.16 290.82 287.48 284.14 280.79 277.45
N Fc + Fsc - Fst 0.00 87.14 162.20 229.01 289.91 346.46 399.69 450.34 498.95 545.91 583.13 618.97 654.80 690.63 726.46 762.29 798.12 833.95
M MOR 87.01 100.50 111.87 121.72 130.40 138.16 145.17 151.53 157.34 162.65 166.20 169.29 172.15 174.76 177.14 179.28 181.17 182.83
Labels for chart
N diff 87.14 75.07 66.81 60.91 56.54 53.23 50.65 48.61 46.96 37.22 35.83 35.83 35.83 35.83 35.83 35.83 35.83 35.83
M diff 13.49 11.37 9.84 8.68 7.76 7.01 6.36 5.81 5.31 3.55 3.09 2.85 2.62 2.38 2.14 1.90 1.66 1.42
12 Bar diameter
d' = 42 d= 358 mm Asc 678.6 mm²
N=0 quadratic a = 4824.000 b = 8.54E+04 c = -1E+07
n max = 944.9 Interval = 7.931 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 37.47 45.40 53.33 61.27 69.20 77.13 85.06 92.99 100.92 108.85 116.78 124.71 132.65 140.58 148.51 156.44 164.37 172.30
Fc Conc comp force 180765 219024 257284 295543 333803 372063 410322 448582 486841 525101 563361 601620 639880 678139 716399 754659 792918 831178
c strain Steel comp strain -0.00042 0.00026 0.00074 0.00110 0.00138 0.00159 0.00177 0.00192 0.00204 0.00215 0.00224 0.00232 0.00239 0.00245 0.00251 0.00256 0.00261 0.00265
t strain Steel tens strain 0.02994 0.02410 0.01999 0.01695 0.01461 0.01275 0.01123 0.00997 0.00892 0.00801 0.00723 0.00655 0.00595 0.00541 0.00494 0.00451 0.00412 0.00377
fsc Steel comp stress -97.99 39.07 135.36 206.72 261.72 305.41 340.96 370.44 395.28 416.51 421.38 421.38 421.38 421.38 421.38 421.38 421.38 421.38
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force -33246 13255 45926 70138 88800 103624 115683 125686 134116 141318 142972 142972 142972 142972 142972 142972 142972 142972
Fst Steel tens force 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518 147518
z Conc lever arm 341.14 337.57 334.00 330.43 326.86 323.29 319.72 316.15 312.59 309.02 305.45 301.88 298.31 294.74 291.17 287.60 284.03 280.46
N Fc + Fsc - Fst 0.00 84.76 155.69 218.16 275.08 328.17 378.49 426.75 473.44 518.90 558.81 597.07 635.33 673.59 711.85 750.11 788.37 826.63
M MOR 51.16 64.73 75.85 85.35 93.70 101.18 107.94 114.11 119.76 124.94 128.96 132.46 135.68 138.63 141.30 143.70 145.83 147.69
Labels for chart
N diff 84.76 70.93 62.47 56.92 53.08 50.32 48.26 46.69 45.46 39.91 38.26 38.26 38.26 38.26 38.26 38.26 38.26 38.26
M diff 13.57 11.11 9.50 8.35 7.47 6.76 6.17 5.65 5.18 4.03 3.49 3.22 2.95 2.67 2.40 2.13 1.86 1.58
10 Bar diameter
d' = 41 d= 0 mm Asc 0.0 mm²
N=0 quadratic a = 4824.000 b = 0.00E+00 c = -0.00E+00
n max = 0.0 Interval = 0.000 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
n Neutral axis 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Fc Conc comp force 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
c strain Steel comp strain #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
t strain Steel tens strain #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
fsc Steel comp stress #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
fst Steel tens stress #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Fsc Steel comp force #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Fst Steel tens force #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
z Conc lever arm 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
N Fc + Fsc - Fst 0.00 #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
M MOR #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Labels for chart
N diff #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
M diff #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!
0 0 0 0 0 0
LOADCASES 200 100 50 150 150 50
489542678.xls 09/04/2020
Project Spreadsheets to BS 8110
Location Columns at A1, A2 etc CALCULATIONS II
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Originated from 'RCC52.xls' v3.1 on CD © 2006 TCC Date 4-Sep-20
489542678.xls 09/04/2020
Project Spreadsheets to BS 8110
Location Columns at A1, A2 etc CALCULATIONS III
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Originated from 'RCC52.xls' v3.1 on CD © 2006 TCC Date 4-Sep-20
42.77 39.29 36.21 33.49 31.06 28.89 26.93 25.17 23.58 22.13 20.81 19.61 18.51 0
-6.24 -5.74 -5.29 -4.89 -4.53 -4.22 -3.93 -3.68 -3.44 -3.23 -3.04 -2.86 -2.70 0
26.10 23.98 22.10 20.44 18.96 17.63 16.44 15.36 14.39 13.51 12.70 11.97 11.30 0
-3.90 -3.58 -3.30 -3.06 -2.83 -2.64 -2.46 -2.30 -2.15 -2.02 -1.90 -1.79 -1.69 0
16.71 15.35 14.15 13.08 12.13 11.28 10.52 9.83 9.21 8.64 8.13 7.66 7.23 0
-2.57 -2.36 -2.18 -2.01 -1.87 -1.74 -1.62 -1.51 -1.42 -1.33 -1.25 -1.18 -1.11 0
10.69 9.82 9.05 8.37 7.77 7.22 6.73 6.29 5.89 5.53 5.20 4.90 4.63 0
-1.67 -1.53 -1.41 -1.31 -1.21 -1.13 -1.05 -0.98 -0.92 -0.86 -0.81 -0.76 -0.72 0
6.01 5.52 5.09 4.71 4.37 4.06 3.79 3.54 3.32 3.11 2.93 2.76 2.60 0
-0.95 -0.87 -0.80 -0.74 -0.69 -0.64 -0.60 -0.56 -0.52 -0.49 -0.46 -0.44 -0.41 0
#DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! 0
#DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! 0
489542678.xls 09/04/2020
Project Spreadsheets to BS 8110 LOADCASES
Location Columns at A1, A2 etc
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO BS 8110:2005 Made by RMW Job No R68
Originated from 'RCC52.xls' v3.1 on CD © 2006 TCC Date 4-Sep-20
LOADCASE 1
N= 500 M= 200
Nuz Mmax Status Nuz Mmax lu M lu N lu Mdif lu Ndif
32 4177.376 377.4 ok 0 4177.4 377.4 377.36 499.3351 6.580488 56.42969
25 3385.074 264.6 ok 0 3385.1 264.6491 262.60 482.5284 6.222193 53.08229
20 2938.288 201.0 ok 20 2938.3 201.0383 197.55 470.6398 6.028866 50.80216
16 2652.344 157.5 Fails 0 2652.3 157.4582 157.34 498.9517 5.309382 46.96002
12 2429.944 122.8 Fails 0 2429.9 122.7823 119.76 473.4392 5.178183 45.46135
10 0 0.0 Fails 0 #DIV/0! #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0!
20
LOADCASE 2
N= 1850 M= 100
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.376 319.4 ok 0 319.3985 354.87 1514.661 -36.8697 348.5236
25 3385.074 217.1 ok 0 217.1092 236.37 1660.809 -24.2792 238.5306
20 2938.288 160.3 ok 0 160.3328 170.51 1755.547 -20.2318 187.7509
16 2652.344 122.5 ok 16 122.4825 125.32 1826.357 -19.3212 160.726
12 2429.944 92.0 Fails 0 92.00234 105.33 1737.403 -17.3872 146.8617
10 0 0.0 Fails 0 #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0!
16
LOADCASE 3
N = 3000 M= 50
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.376 179.4 ok 0 179.407 186.93 2949.006 -28.2813 191.7397
25 3385.074 57.6 ok 25 57.5686 59.79 2985.136 -6.36126 42.55022
20 2938.288 0.0 Fails 0 #DIV/0! 0.00 2938.288 0 0
16 2652.344 0.0 Fails 0 #DIV/0! 0.00 2652.344 0 0
12 2429.944 0.0 Fails 0 #DIV/0! 0.00 2429.944 0 0
10 0 0.0 Fails 0 #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0!
25
LOADCASE 4
N = 1500 M= 150
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.376 356.4 ok 0 356.3968 396.53 1113.748 -41.6582 400.9131
25 3385.074 251.6 ok 0 251.6379 261.27 1398.587 -24.9024 262.2213
20 2938.288 194.3 ok 0 194.3412 207.88 1341.792 -18.3564 214.4587
16 2652.344 156.6 ok 16 156.5984 157.83 1486 -15.3156 173.872
12 2429.944 127.2 Fails 0 127.205 132.60 1433.047 -12.4311 154.2564
10 0 0.0 Fails 0 #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0!
16
LOADCASE 5
N = 1000 M= 150
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.376 407.3 ok 0 407.285 408.42 976.7936 -2.08594 42.48485
25 3385.074 295.3 ok 0 295.2778 295.36 992.8356 -0.40198 34.52469
20 2938.288 231.1 ok 0 231.119 230.78 973.4886 0.432395 33.53263
16 2652.344 187.4 ok 0 187.3537 187.06 977.2787 0.459409 35.83129
12 2429.944 152.6 ok 12 152.639 152.38 979.6696 0.490052 38.2596
10 0 0.0 Fails 0 #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0!
12
LOADCASE 6
N = 1000 M= 50
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif
32 4177.376 407.3 ok 0 407.285 408.42 976.7936 -2.08594 42.48485
25 3385.074 295.3 ok 0 295.2778 295.36 992.8356 -0.40198 34.52469
20 2938.288 231.1 ok 0 231.119 230.78 973.4886 0.432395 33.53263
16 2652.344 187.4 ok 0 187.3537 187.06 977.2787 0.459409 35.83129
12 2429.944 152.6 ok 12 152.639 152.38 979.6696 0.490052 38.2596
10 0 0.0 Fails 0 #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0!
12
Disclaimer
All advice or information from the British Cement Association and/or The Concrete Centre is intended for those who
evaluate the significance and limitations of its contents and take responsibility for its use and application. No liab
(including that for negligence) for any loss resulting from such advice or information is accepted by the BCA, TCC or
subcontractors, suppliers or advisors. Users should note that all TCC software and publications are subject to revision f
time to time and should therefore ensure that they are in possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets:
available from The Concrete Bookshop, www.concretebookshop.com, Tel +44 (0)700 4 607777 or +44 (0)1276 607140
Status of spreadsheet
Public release version.
Date Version
28-Jun-06 RCC52 v3.1
11-Nov-05 RCC52 v3.0
22-Jan-03 RCC52 v2.1
11-Oct-02 RCC52 v2.0
6-Aug-99 RCC52v1.0
mation from the British Cement Association and/or The Concrete Centre is intended for those who will
icance and limitations of its contents and take responsibility for its use and application. No liability
negligence) for any loss resulting from such advice or information is accepted by the BCA, TCC or their
pliers or advisors. Users should note that all TCC software and publications are subject to revision from
ould therefore ensure that they are in possession of the latest version.
hould be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v3'
Concrete Bookshop, www.concretebookshop.com, Tel +44 (0)700 4 607777 or +44 (0)1276 607140
This spreadsheet is shareware. It may be distributed freely, but may not be used for
commercial purposes until the user has registered with the TCC via
The Concrete Bookshop.
RCC52 Column Chart generation