Sie sind auf Seite 1von 6

ASSIGNMENT CAD MODEL OF TABLE

Objective

The table has been designed so that it can be attached to any sill level of the window. It has
detachable legs that can be attached and detached at any time. The legs also can be moved u and
down according the level of sill window.

Parts
1. Table top
2. Leg bottom
3. Leg upper part
4. Clamp
5. Bolt for clamp

Main Dimensions
Table top has dimensions of 3feet by 1.5 feet. While height is adjustable. Leg bottom and leg
upper part each have height of 1.5 feet.

Table top
For press fit of legs

Legs bottom
For tightening
the upper part
with bolt

Clamp
One side of the clamp will fit into the table top. It will fix rigidly as a force fit. Now the other
end of the clamp which has hole, a bolt will fit inside it. The window sill is kept inside the gap,
and bolt is tightened so that it will grip sill.

Bolt for tightening

On the head of the bolt. Handle is provided so that it can be screwed by hand with convenience.
Assembled Table
Table fitted on a window sill(illustration)

Cost Estimation and Material Specification


Sr. # Part Material Weight Cost/Price($) Calculations Total Price
1 Table top SCH40/Plastic 1.5 kg 6 / ft 7 x 4.5 31.5
2 Legs upper part Steel pipe 0.5 kg 7 / ft 7 x 1.5 10.5
3 Legs bottom part Steel pipe 1 kg 9 / ft 9 x 1.5 13.5
4 Clamp Steel 0.5 kg 15 / piece 15 x 2 30
5 bolt CI 0.25kg 10/ piece 10 x 3 30
6 Labor charges - - 18 -- 18
Total 133.5 $

Das könnte Ihnen auch gefallen