Beruflich Dokumente
Kultur Dokumente
WOODWIND TOOLS
L13 TUNING SLIDE N60 SAX POST RAISING TOOLS
REMOVAL TOOL
This solid steel tapered body mandrel is a copy of the original sax body rod Cliff and Gary have used for
over 50 years. It works equally well on alto, tenor and baritone sax bodies. The body must be apart to use it as
you are likely working on a badly bent or damaged instrument. Use to straighten, dent or burnish the body
tube.
N93 Sax Body Mandrel
WOODWIND TOOLS
*NEW* REP FERREE’S
N16 SAX DENT ROD GUIDE
The tool is laid REPAIR MANUAL
over the tone hole
opening. The
desired dent rod Now, also available,
with the ball is the original “Ferree’s
u s e d t o Repair Manual,” from
carefully push up the Ferree’s Repair
the dented key School.
guards, posts and Used as a college text,
dents that are close this rare book has now
to the tone hole opening. A centering notch been re-edited,
prevents the dent rod from slipping. The dent rods typo-corrected, reprinted
and balls not included. and is now available for
you. There are no
N16S Sax Dent Rod Guides (Set of 3) pictures, just a lot of
N16A Sax Dent Tool 3/4” (19mm) intense information, in
easy to read layout and divided into chapters so you
N16B Sax Dent Tool 1” (25.4mm)
can easily look up what you are most interested in
N16C Sax Dent Tool 1-1/4” (31.8mm) doing. More intense than EB3.
Two new sets of balls for sax work that will fit the
N31 and N74 dent rods. Each set has a round ball
and a barrel shaped ball. The round ball is for
pushing up dents in sax bodies. The barrel shaped
ball is for smoothing out dents. The balls are slotted
so they can be slipped past the octave tube going in
through the neck receiver.
N81A Round push ball and barrel shaped ball The well known Erick Brand Repair Manual,
for alto sax considered by some as the “Bible” of the industry.
N81B Round push ball and barrel shaped ball Everything you need to know about repairing band
for tenor sax instruments including recommended tools. This
N81S A set consisting of all the balls listed in manual has been faithfully reprinted by Ferree’s
N81A and B since 1993, to help newcomers.
(Round balls have a thread size of 3/8-16. EB3 Erick Brand Repair Manual
Barrel shaped balls have a thread size of 1/2-13)
57
WOODWIND TOOLS
WWODWIND TOOLS
*NEW* ERV STRING REPAIR FOR A super tool for tightening loose bearing plates in
BAND INSTRUMENT REPAIRMEN warn rotor valves.
Quickly tightens bearing plates by expanding their
Here it is! A violin repair diameter by “swedging” them while they spin in this
manual written especially for handy fixture that is mounted in your lathe or even
Band Instrument Repairmen by your bench motor. Roller makes easy work of this old
a Band Instrument Repairman problem.
who is also well schooled as a
Luthier. Richard Ervin, who P61 Back Rotor Bearing Plate Expander
trained with roots going back
to the Mittenwald school in
Germany, makes string repair
understandable and easy to SEE US ONLINE AT
perform.
ERV String Repair Book www.ferreestools.com
58
REPAIR KITS
REPAIR KITS
EMERGENCY REPAIR KITS Q30 STANDARD REPAIR KIT
Take a look at these handy kits. There is a
size for every need and they’re easy to sell to:
*Band Directors
*Salesmen
*“On the road” musicians
GLEN KEITH
KEN ROGER
60
PICTURES
PICTURES
LYLE
SHIPPING DEPARTMENT
Suzy, Linda, Lisa, Dorothy, Marilyn
RODNEY STEVE Y.
RUSTY DALE
RYAN LINDA
61
WOODWIND tools
WOODWIND TOOLS
E67 Post Locking Screw Countersink E68 Post Body Countersink and Drill 5.8mm
E69 Post Body Countersink and Drill 6.5mm
E61 FLUTE GAUGE
E57 POST BODY COUNTERSINKS
Special gauge for adjusting flute pad cup openings
and for leveling. The small step is for trills and the
upper C# key. The middle step is for mainline keys
on the body and the
third steps is for foot
joint keys.
WOODWIND TOOLS
*NEW* N97 COMPACT N99 BENCH MOTORS
BENCH MOTOR
D5 ADAPTOR CHUCK
Has two sets of Stainless steel with measuring faces precision
j a w s 0 ” ground and micro lapped for ultimate accuracy. Scale
to .090” (0mm to surface has a satin chrome finish with engraved
2.29mm) capacity graduations. Has a clamp for repetitive settings.
for use on lathe or Comes with protective case.
bench motor to hold G5A 4” length by .001”
small drills G5B 10cm length by .05mm
G24A 6” length by .001”
D5 Adaptor Chuck G24B 15cm length by .05mm
64
WOODWIND tools
WOODWIND TOOLS
*NEW* F77 POWERDRIVER SCREWDRIVERS
F70 SCREW
HOLDING SCREWDRIVER
F66 5-1/4” (133mm) Screwdriver with .062”
(1.6mm) tip
F66A Blade, 1-1/2” (38.1mm) long with .062”
(1.6mm) tip
F66S Replacement blade set screw
F66W Small Allen wrench to fit blade set screw
F67 6-3/4” (172mm) Screwdriver with .085” No more lost screws with this screw holding screw
(2.15mm) tip driver that features self-adjusting jaws. Holds pivot
F67A Blade, 3” (76mm) long with .085” or flat spring screws straight and secure while
(2.16mm) tip inserting or removing.
F68 9” (229mm) Screwdriver with .125”
F70 Screw Holding Screwdriver
(3.2mm) tip
F68A Blade, 6” (152mm) long with .125” F70A Blade for F70 Screwdriver
(3.2mm) tip
F72 Blade, 6” (152mm) long with .125”
F74 SCREWDRIVER
(3.2mm) tip, 5-1/2” long handle BLADE MAGNETIZER
Here is the ideal way
to magnetize your
screwdrivers, taps and
other small metal tools.
A small, two-piece block
is held together by
rubber tubing. It has a
hole through the middle.
Pass the screwdriver
A light-weight, versatile, swivel top screwdriver thru the hole and your
with a small reversible blade. Total is tool will be magnetized. The best way we know of
4-1/2” (114.30mm) to hold small screws on a screwdriver tip.
F60 Swivel Top Screwdriver
F60A Small reversible blade for F60 F74 Screwdriver Blade Magnetizer
66
Woodwind tools
WOODWIND TOOLS
D1 SPRING HOOKS D14 SAX NECK SCREW
EXTRACTOR
The D14
Sax Neck
S c r e w
Extractor
For hooking up and adjusting spring tension on is used to
needle springs. The push and pull. About remove the remaining threaded shaft of a broken
5” (127mm) sax neck screw from the screw holder socket.
Simply press teeth against the end of the piece to
D1A Spring Hook, medium size for clarinet be removed and twist. Reversible bit has right and
D1B Spring Hook, large size for sax left handed teeth. Comes complete with chrome
plated, swivel top handle.
D44 PIN VISE D14 Sax Neck Screw Extractor
Has adjustable D14A Replaceable Blade
collets on both ends
to hold small hand D35 TESTING FEELER HOLDER
tools. For instance,
holding small drills
for installing oversize springs in reed instruments or
holding a pad while applying shellac, so you don’t
burn your fingers.
D44 Pin Vise
E8 SAX NECK HOLDERS Make your own feelers to fit this permanent
handle. This is the only way to be sure a pad is
perfectly seated. Feelers can be made from fish skin,
Two expandable cellophane or the leader from an old cassette tape.
mandrels to spin a sax
neck in a lathe while D35 Testing Feeler Holder
sanding corks. Do not
use in a Bench Motor.
Insert in lathe chuck
or N98 Valve D38 SPRING PUNCHES
Lapping Machine. Do
not run over 900 rpm.
E8 Saxophone Neck Holder .425”
E8A Saxophone Neck Holder .475”
D13 SAX PAD OPENING
HEIGHT GAUGE
A set of two spring punches used to drive out
A set of millimeter broken needle springs that you are unable to remove
gauges used to determine with the E4 Spring Removing Pliers. Remove the
the height of saxophone post from the clarinet and lay it on an L24 Lead
pad cups. 2mm thru Block. Use a F5 Rawhide Mallet to stick the post
12mm in one millimeter into the lead, then use the punch to drive the spring
steps. Flat black finish. into the lead.
D13 Sax Pad Opening Height Gauge D38 Set of two Spring Punches
67
WOODWIND tools
WOODWIND TOOLS
This plier will remove whole springs without E10 Flute Key Leveling Tool
breaking them when overhauling a reed instrument.
Designed with tremendous leverage for better
gripping power. Now, stainless steel, box-joint.
5” (127mm) long. www.ferreestools.com
E5 Spring Removing Plier
68
WOODWIND tools
WOODWIND TOOLS
F80 ADJUSTABLE WOODWIND *NEW* P60W SWEDGING TOOL
KEY SWEDGING TOOL FOR LARGE WOODWIND KEYS
F28 F28A
WOODWIND TOOLS
E33 CLARINET PAD E41 FLAT SPRING HOLE PUNCH
LEVELING TOOL
An ideal way to punch
holes in flat springs. Used
Used to level
primarily for punching an
pads when
extra hole in flat springs
regulating
where there are two
clarinets,
screws, as in bassoons
oboes, etc..
and some flutes.
Has a small
The hardened punch and die will punch
notch to aid in applying cork to clarinet crows foot.
a .060” (1.5mm) hole in a flat spring. New hole will
accept an 0 X 80 flat spring screw. There is a
E33 Clarinet Pad Leveling Tool (Pad Slick) T-handle on the screw punch for easy operation.
One of our most popular specialized woodwind
bench tools.
E34 FLUTE PAD IRONING TOOL
E41 Flat Spring Hole Punch
E11 Flute Pad Cup Leveling Tools, Adjustable oboe octave tube remover adjusts
laterally. Fits most any oboe.
WOODWIND TOOLS
O38 SAX OCTAVE *NEW* E42 SAXOPHONE PAD
KEY LEVER TUBING SLICKS
Opaque white Teflon tubing for saxophone octave These pad slicks are NOT meant to bend keys, but
key lever. Gives smooth action. to protect the pads from the tone hole edge AFTER
O38 Sax Octave Key Lever Tubing the leveling is done and before the seating!
(Sold by the foot) *Only .020” (.5mm) thick, doesn’t affect angle of
pad to tone hole.
O41-O45 LOW TEMPERATURE *Double ended for more precision fit and 18
different sizes.
HEAT SHRINK TUBING *Each has a center hole to fit around any style
resonator.
This tubing is in answer to many requests from *Stainless steel construction (rust free) for those
our customers. It’s used on woodwind instruments who still use water. Ferree’s pads DO NOT require
as key silencers, etc… Easily shrunk using the J99 water.
heat gun, a bunsen burner or another heat source.
Color is BLACK (sold by the foot).
WOODWIND TOOLS
G20 JET MAGIC H75 HOT STUFF GLUE AND
GRENADILLA CHIP KIT
Jet Magic is a two part
epoxy glue that will not Quick way to
deteriorate or rot. It fill holes, cracks
resists water, oil and and chips in
acids. After appropriate w o o d
curing time it can be instruments. Can
tapped, drilled or sanded. also be used to
Unequaled for repairing repair chipped
broken tenons, joints and tone holes and
mouthpieces. G20 Jet cracked pin holes.
Magic is black to blend The chips are made of the finest grenadilla wood.
with clarinet color. Price is for a kit including H75 Hot Stuff Glue is a special cyanoacrylate glue
adhesive, catalyst and solvent. that is extremely thin. It will instantly soak into and
penetrate the chips, unlike the super glues you buy at
G20 Jet Magic grocery and drug stores.
G20S Refill Solvent for G19 or G20
G20PT1 Part One Refill Take some grenadilla chips in your fingers.
G20PT2 Part Two Refill Pulverize them between your fingers and thumb and
fill the crack or the hole. Mound up the chips slightly.
Add about 3 to 4 drops of Hot Stuff Glue. You will
see in about 15 seconds the grenadilla chips are hard
G19 CLEAR MAGIC enough to be sanded or filed. No more waiting
overnight for epoxy to dry.
Comparable to G20 Jet Magic, except that G19
Clear Magic is colorless. Can be used to repair holes H75 Hot Stuff Glue and Grenadilla Chip Kit
in fiberglass sousaphones and cracks in bassoons. H75A 1/2 oz (14.2g) Hot Stuff Glue
Price includes adhesive, catalyst and solvent. H75B 1/3 cup (35.5g) Grenadilla Chips
This powdered black pigment will help you H75D Ultra Solvent
match the original color on oboes and clarinets The solvent will take care of unwanted bonds
when using grenadilla replacement parts. by dissolving them. Works quickly and easily.
Simply mix the black pigment with alcohol and
apply to the grenadilla wood. Let it stand about one H75E Extra Fine Tubing
minute until the alcohol dries and then polish. Fine spaghetti tubing used with H75 Hot Stuff
Glue. Due to the small I.D. of the tubing it is easily
G22 Black Pigment Stain plugged with glue. Keep some extra on hand.
WOODWIND TOOLS
*NEW* E97 SAXOPHONE *NEW* E98 FLUTE TONE HOLE
TONE HOLE REFACING TOOL REFACING TOOL
These NEW E97 Diamond and brass refacing tools
are now available This flute
in two different specific tool is a
grits; the standard refined version of
400 and fine 800, the hexagonal one
for both cutting and we have had for
deburring depend- saxophones since
ing on your need. the late 1980’s.
For doing really The new, longer,
fine tone hole work round and knurled
without the guess- aluminum handle gives you more control over the
ing and approximate precision of not having a tool movement of the diamond cutting face, since you do
made for the specific purpose of leveling and not have to overcome the ‘inertia’ caused by the
smoothing the tone hole surface. heavier hexagonal brass handle model.
These tools are designed with the intent to allow The delicate nature of a flute requires your hand to
you to both smooth and level a tone hole quickly and have ultimate control unlike the bigger, heavier and
easily after a body straightening and any dent work thicker tone hole saxophones.
area done. Many times only a quarter turn of the tool This tool now comes complete with 4 pilots for
is required to check the status of the tone hole and the basic sized tone holes on most flutes. The pilots
keep material removal to a minimum. These tools are:
save on fingers, hands and fingertips. 4/16” (6.35mm)
These new refacing tools use the same proven 7/16” (11.11mm)
rotary method used with the old E96 set. This new 8/16” (12.7mm)
E97 set contains the same pilot discs, handles and 9/16” (14.28mm) in diameter
wrenches, but is crafted from billet machined brass to Specific pilot sizes to your specs are available by
hold a diamond disc as a precision cutting surface. special order. Or, you may modify the ones that
These tools are made from brass to allow cleaning of come with it.
the abrasive diamond disc with a toothbrush and The replacement 800 grit diamond disc is a
plain water. If desired, you may order a set of brass standard part we carry; its number is E97D8-1.
refacing tools with either the 400 or 800 grit. E98 Flute Tone Hole Refacing Tool
E98P Pilot-Specify Size
E97-4 Rotary Tone Hole Refacing Set (400 grit)
E97P-1 Indvl. Pilot 1/4”
E97D4-1 .75” 400 grit Round Diamond Disc
E97P-2 Indvl. Pilot 3/8”
E97D8-1 .75” 800 grit Round Diamond Disc
E97P-3 Indvl. Pilot 1/2”
E97D4-2 1.00” 400 grit Round Diamond Disc
E97P-4 Indvl. Pilot 3/4”
E97D8-2 1.00” 800 grit Round Diamond Disc
E97P-5 Indvl. Pilot 1”
E97D4-3 1.25” 400 grit Round Diamond Disc
E97P-6 Indvl. Pilot 1-1/8”
E97D8-3 1.25” 800 grit Round Diamond Disc
E97P-7 Indvl. Pilot 1-1/4”
E97D4-4 1.50” 400 grit Round Diamond Disc
E97P-8 Indvl. Pilot 1-1/2”
E97D8-4 1.50” 800 grit Round Diamond Disc
E97P-9 Indvl. Pilot 1-5/8” (not in set)
E97D4-5 2.00” 400 grit Round Diamond Disc
E97D8-5 2.00” 800 grit Round Diamond Disc
E97R-1 .750 Brass Round (19mm)
E97R-2 1.000 Brass Round (25.4mm)
E97F-1 Indvl. Rotary File 3/4”
E97R-3 1.250 Brass Round (31.75mm)
E97F-2 Indvl. Rotary File 1”
E97R-4 1.500 Brass Round (38mm)
E97F-3 Indvl. Rotary File 1-1/4”
E97R-5 2.000 Brass Round (50.8mm)
E97F-4 Indvl. Rotary File 1-1/2”
E97F-5 Indvl. Rotary File 2”
E97W Universal Wrench
77
Woodwind tools
WOODWIND TOOLS
WOODWIND TOOLS
G53 & G54 CLARINET
7. Now you can unscrew the T handle from the
TONE HOLE UNDERCUTTERS
cutter and pull out the insertion rod out of the
clarinet. The cutter will come out with the rod.
8. While holding the clarinet joint, pull up on the
T handle and twist it clockwise. This will pull
the undercutter against the inside of the tone
hole. The clockwise turning will remove the
material making a perfect tapered opening. It
normally only requires a few turns of the
handle (5 or 6). Not a lot of upward pressure
is necessary.
A G53 Soprano Clarinet Undercutter set
consists of the insertion rod, three T handles, and
six precision cutters.
This tool was developed at the request of several A G54 Bass Clarinet Undercutter set consists of
Repairmen. These Repairmen had been getting the insertion rod, two T handles and seven
requests to undercut the tone holes on bass and precision cutters.
soprano clarinets. Accomplished players feel that
this undercutting improves the tone, response and G53 Clarinet Tone Hole Undercutters
clarity of many of the notes on the clarinet. (6 cutters)
This tool accomplishes the undercutting that is
G54 Bass Clarinet Tone Hole
already standard on many French manufactured
clarinets. Now you can perform the procedure on Undercutters (7 cutters)
any clarinet. G54A, B Individual handles for G54
Ferree’s G53 Soprano Clarinet Tone Hole Under G54C Insertion Rod for G54
cutters and G54 Bass Clarinet Tone Hole Under G55 Insertion Rod-Alto Clarinet
cutters make this undercutting a simple task.
1. Choose one of the G53 or G54 Under cutters M49 BASSOON BELL RINGS
that matches the tone hole you will be cutting.
Ferree’s Bassoon Bell Rings are made of a slightly
2. Slide the keyed slot in the bottom of the off-white nylon to make the color as close to original
cutter over the keyed part of the insertion rod. ivory as possible. They will fit most popular
bassoons and only
3. Slide insertion rod (with the cutter resting on have to be glued in
it) into the end of the clarinet joint. By looking place using G19 Clear
thru the tone hole, stop the cutter directly under Magic Glue. The
the hole you will be working on. standard dimensions
in the picture shown
4. Insert the threaded T handle down thru the are;
tone hole and screw it into the under cutter.
A. 1-3/4” (44.5)
5. Pull out the insertion rod from the clarinet B. 2-1/8” (54mm)
joint. C. 2.70” (68.6mm)
6. After the hole has been undercut, return the M49 Bassoon Bell Ring (Standard Size)
insertion rod into the clarinet joint and insert M49A Bassoon Bell Ring (Specify-Custom Size)
the keyed end back into the key way in the Send dimensions A & B
under cutter. (Cont. top of next column)
79
Tenon fitting tools
TENON FITTING TLS.
WOODWIND TOOLS
H60 thru H63 EXPANDERS N77 FLUTE AND PICCOLO
HEAD SWEDGING DIES
WOODWIND TOOLS
Q75 PICCOLO LEAK LIGHT G42 ADJUSTMENT
SCREW DRILLING JIG
Q80 Fluorescent Leak Light with 12” bulb Fluorescent Leak Light Control Box only. Use
Q80-2 220V for European Customers tubes with attached cords (Q83 or 85) and plugs.
Control box accepts either of the following bulb/
Send your complete unit back and we will cord/plug combinations.
replace the bulb for a minimal fee.
Q82 Control Box Only
Q87 & Q89 REPLACE YOUR Q82-2 220V for European Customers
OWN FLUORESCENT TUBES TUBE WITH CORD AND PLUG FOR Q82
Buy one or both
These fluorescent tubes are available at most Q83 6” (152mm) fluorescent, 4 watt tube
hardware stores. If you can’t get them locally, we with cord and plug
will supply them for you. Q85 12” (305mm) fluorescent, 8 watt tube
with cord and plug.
Q87 6” (152mm) 4 watt tube Q83 If a bulb breaks, send your cord back and we will
Q89 12” (305mm) 8 watt tube for Q85 replace the bulb for a minimal fee.
WOODWIND TOOLS
G37 RUBBER WEDGES G82 FLUTE PAD SEATING
SPRING CLIPS
For Repairmen who
prefer rubber seating
wedges. Available in
three sizes and sold in
dozens or hundreds.
G38B Large Wood Wedges The G26 Flute Seating Clips are smaller than the
1-1/2” x 1/2” (38.1 x 12.7mm) G82 Flute Clips and good for playing condition
jobs. The clips are vinyl covered to prevent them
from scratching the instrument while in use. Not
recommended for use in X100 Flute Pad Oven.
Place your order 24 hours a G26 Flute Pad Seating Clips
day by calling 800-253-2261, G26S Set of 18 Clips
faxing to 269-965-7719 or
email to Notes from customers:
“I want to thank you for all your time with
ferreestools@aol.com. us on Saturday. You reinforced some things
that I was already doing and taught me much
more about how to be a successful
Be sure to have your repairman!...Billy Walker, Dallas.
customer number, address,
phone number, item numbers
and payment method.
Fax:269-965-7719
85
Woodwind tools
TENON FITTING TLS.
The J99 is a
professional hi-heat
blowgun for
seating saxophone
and flute pads. Less
change of burning
corks, pads or
lacquer when used
like a blowpipe.
UTILITY KNIFE
Utility knife with unlimited uses. Cuts, carves,
opens and trims. Extra blades store in the handle.
Five blades are included.
D45 Utility Knife
D45A Package of five extra blades
WOODWIND TOOLS
H70 FERREE’S R76 PAD AND CORK CEMENT
QUICK -DRY CORK CEMENT
D46 Medium
for soprano
clarinet
L100 Glue Gun Deluxe Kit contains: E60 CRACK SLICK SPATULA
▪Trigger Operated Glue Gun
▪Two, 4” (102mm) Clear Glue Sticks
▪Two, 4” (102mm) White Glue Sticks
WOODWIND TOOLS
D100 115 PIECE H.S. D220W & D220F
DRILL BIT SET INDIVIDUAL DRILLS
WIRE GAUGE SIZES
The most Individual drills are available from size 1 thru 80.
complete set of Specify size you want.
high speed drill
bits on the market. D220W Individual Wire Drills (Specify Size)
Three complete
sets in one box FRACTIONAL SIZES
including: Individual drills available in fractional sizes.
Specify the size you want. Drills are available from
1/16” thru 1/2” graduated in 64ths of an inch.
1. Sixty piece set of number drills 1 thru 60
2. Twenty six piece set of letter drills A thru Z D220F Individual Fractional Size Drills
3. Twenty nine piece set of fractional drills 1/16” (Specify Size)
thru 1/2” (1.6 thru 12.7mm)
4. Sturdy steel case
CLIFFS TIPS…
D100 High Speed Drill Bit Set Use a D220W,l #55 drill and a
D200, 0-80 Tap to drill and tap keys
STRAIGHT SHANK DRILLS for flat spring screws.
D101 No. 1 thru 60. 60 drills in a set D220L Left hand Drill Bit (Specify Size)
D118 No. 60 thru 80. 20 drills in a set
D102 1/16 thru 1/2 by 64ths. 29 drills in a set World’s Largest
Manufacturer
D103 & D104 WIRE DRILL GAUGE
of Quality Band
Speed up the determination of
drill sizes when they are
Instrument
unmarked or mixed up. Repair Tools.
WOODWIND TOOLS
*NEW* Z120 WOODWIND X116 SPECIAL BUFFING MOTOR
BENCH LATHE
3/4” hp motor,
5/8” (15.9mm) shaft
available in both 1725
and 3450 rpm.
The slower one can
be used for keys, small
parts and mouthpiece
buffing and the faster one as a substitute buffer for
larger parts in a small shop. Uses D36R or D36L
arbors, and E7BR or E7BL Tapered Spindle
Adaptors or a combination of both of them. 4” thru
This self contained little dynamo can help you do 6”(102mm thru 152mm) buffs can be used. Suggest
what needs to be done on all the small machine jobs using a foot switch when wiring, for more control.
that come your way. Special hollow chuck mandrel so
you can thread long rods. Special tapered mandrels so X116A Special Purpose Motor, 1725rpm
you can turn clarinets and oboe joints. Does X116B Special Purpose Motor, 3450rpm
everything a bench motor does and MORE.
SHAFT UTILITY ARBORS
INCLUDED:
Variable Speed 500-4000 r.p.m. Arbor to hold small buffs
3/8” Jacobs chuck and aluminum hand brake or grinding wheels. Fits
Special Ferree ’Live’ in tail stock over motor shaft, affixed
Outfitted tool rest base by set screw. Comes in two
6” turning diameter (3” swing) sizes, in both right and left
11”+ between centers (working parts) hand.
Clarinet and oboe turning arbors
Mandrel and arbor removing tool
RIGHT HAND ARBOR
Z120 Woodwind Bench Lathe D34R 1/2” (12.7mm) shaft size
D36R 5/8” (12.7mm) shaft size
E32 SPECIAL
COMBINATION WIDE ANGLE LEFT HAND ARBOR
WOODWIND LIVE CENTER D34L 1/2” (12.7mm) shaft size
D36L 5/8” (15.9mm) shaft size
This center replaces E7 TAPERED SPINDLES
a standard tailstock Mount on motor shaft
center in a lathe. for scratch brush or small
Revolves with the buffs. Fit over motor
work and produces no shaft affixed by set
friction. screw. Comes in two
Holds all woodwind joints including bassoon. sizes, in both right and
left hand.
E32A #1 Morse Taper Wide Angle Woodwind
Live Center
E7AL 1/2” (12.7mm) left hand thread
E32B #2 Morse Taper Wide Angle Woodwind
E7AR 1/2” (12.7mm) right hand thread
Live Center
E7BL 5/8” (15.9mm) left hand thread
E7BR 5/8” (15.9mm) right hand thread
91
WOODWIND tools
WOODWIND TOOLS
WOODWIND TOOLS
N79 FLUTE PAD P30 CORK PAD CUTTERS
HOLE PUNCH SET A series of cutters for
making cork pads. They
The N79 N79Y come in .5 mm steps
set is from 6.5mm thru
designed to 16mm.
punch larger The P30 cutters can
holes in be turned by hand,
standard flute holding them
pads for use perpendicular to the
on open hole cork. Or, you can put a cutter in the drill press (to
French type hold it more firmly) and turn the drill press by hand.
flutes, so that
Repairmen need not carry two complete flute pad P30 Cork Pad Cutters-Individual sizes,
stocks. A set includes a punch and two brass state size wanted.
centering dies to hold the pads. Since each centering
P30S Set of any 10 Cork Pad Cutters-you
die has a different pad size on each end, there is a
total four pad sizes available. The punch will
select the sizes.
automatically center itself and punch a neat hole G16 & G17 PUNCHES
when hit with a rawhide mallet. Be sure to use a P28
Cutting Pad or an L24 Lead Block to protect the
cutting edge of the punch. These are small
The special N79Y optional punch, is used to and easy to use.
enlarge the hole in some flute pads having too small Precision ground
a hole to fit in Yamaha flutes with their raised Chrome Vanadium
flange spuds. All Ferree’s pads fit without alteration. steel. 4” (102mm)
long.
N79 Flute Pad Hole Punch Set
N79P Flute Pad Hole Punch Only CENTER PUNCH
N79Y Yamaha Flute Pad Hole Punch Only G16 Small Point
G16A Medium Point
Mainly for
reheating shellac in Nickel plated Bunsen
pad cups to insure a burner with gas and air
good bond after adjustments. Provides
leveling. Used with a small intense flame.
G38 cork or G37
rubber wedges
G2C Propane Gas Bunsen Burner
D3 Blowpipe for use with natural gas G2N Natural Gas Bunsen Burner
D4 Similar to above. For use with an
alcohol lamp. J88 “CORROSION CRACKER”
PENETRATING OIL
N115 CLARINET BODY
Our Ferree’s
CENTERING CLAMP Corrosion Cracker
Penetrating Oil is
unbelievable. We put
it on a cornet 1st
valve slide that had
been stuck for years.
After allowing it to
set overnight, the
Using Ferree’s G19 Clear Magic makes it possible
slide was REMOVED BY HAND, using no tools
to glue together a plastic, rubber, ebonite or resonite
whatsoever. A recent scientific discovery reduces
clarinet that has been completely broken in half.
surface tension so that this amazing solvent creeps
If you have a G78 Clarinet Grafting Jig or a G74S
into openings as small as ONE MILLIONTH OF
Raised Tone Hole Jig, you can use either of them as a
AN INCH. Some parts can be loosened immedi-
clamp to hold the parts together for precision gluing.
ately, others may require a little more time for the
If you do not have either of the mentioned tools,
oil to work its way to the full length. BUT… it will
this tool will provide you a less expensive way to
work!
clamp and hold the body while the glue is curing.
You can loosen valve and tuning slides, stuck or
Using the N115 Clarinet Body Clamp. Carefully
slow moving woodwind keys and stack rods, nuts,
clean the broken ends with the G20S Jet Magic
bolts, studs, screws, pulleys, shafts, bearings, pipe
Solvent. Be sure the broken edges are free from
threads, valve guides or any other corroded metal
grease, oil and dirt. Then, apply properly mixed G19
parts. You can lubricate air driven tools, remove
to the broken ends in such a way that you don’t get a
rust, gummed oil and grease.
glob in the bore of the instrument when repositioning
them back together. Next, slip the clarinet over the
N115 Clarinet Body Centering Clamp and clamp the J88A 2oz (58 ml) Corrosion Cracker Oil
body together by tightening the knurled knobs. Let it with a G23 Bench Oiler
cure for 24 to 36 hours. J88B Refill of 1 pt (473 ml) Corrosion
If any chips of material have been lost from the Cracker oil
break, you can build up the spot by applying a fresh
batch of G20 Jet Magic as needed. Allow the Jet
Magic to cure between coats, then sand to match the See new items and repair tips on
body contour. our website
N115 Clarinet Body Centering Clamp www.ferreestools.com
94
WOODWIND TOOLS
WOODWIND TOOLS
L56 MICRO TORCH L57 BUTANE REFILLS
This torch is the most Convenient refills for the L56
advanced on the market. A Micro Torch, L61 refillable
piezo electric system gives cartridge, the L62, L65 and the L63
you a flame in one second Pencil Torch.
at the touch of a button.
Needs NO batteries. L57 5-1/2 oz. Gas Refill
An adjustable gas and air
(150g)
control gives you precise
control of a pinpoint flame.
Cannot be shipped by air
The flame will burn
at any angle. This refillable
butane torch features push L62 & L65 PORTABLE BUTANE
button lighting and BUNSEN BURNERS
lightweight handling, it also has an automatic safety
shut off control. Air and gas are both adjustable.
Uses L57 Butane Refills.
95
SUGGESTED DENT MACHINE & ACCESS.
DENT MACHINE SET UP
This is the ultimate set up, all at once. Small shops usually start out and then add to it.
This newest set up has the latest tools that do the work very quickly and better.
Z60 Dent Machine Top, Includes Z61 Dent Machine Base For Sousa
Quick Adjust Z61E Dent Machine Base For Tuba
Z60S Bench Mount Stand for Z60 Z61S Floor Mount Stand For Z60
Z60-14B 3/8” Insert Z61-1 1” Curved Sousa Rod for Z60
Z60-14C 1/2” Insert (included w/Z60)
Z60-14D Stem Mandrel Z61-2 1-1/4” Sousa Rod (included w/Z60)
Z60-16A Sax Roller Z61-9A 1-1/4” Steel ball
Z60-16B Sax Wheel Z61-9B 1-1/2” Steel Ball
Z60-18 1” Sousa Ball Z61-9C 2” Steel Ball
Z60-19 1-5/8” Sousa Z61-9D 2-7/8” Steel Ball
Z60-22 3’ Rod Z61-11 Articulated Tuba Rod
Z60-22A Extended Arm (included w/Z60)
Z60-23 4-1/2” Wheel Z61-13S Set of Aluminum balls
Z60-24 1-1/4” Power Disc (necessary for Z61)
Z60-25 3” Power Disc 13A 2-3/4” ball
Z60-25L Low Profile 3” 13B 3” ball
Z60-25AL Low Profile 2-1/2” 13C 3-1/4” ball
Z60-26 4” Power Disc 13D 3-1/2” ball
Z60-26L Low Profile 4” Z61-16 Base Vise
Z60-27 5” Power Disc
Z60-28 5” Power Roller
Z60-29 Slim Taper Roller
Z60-30 Convex Roller
Z60-31 Machine Vise
Z60-32 30 Degree Arm
Z60-33 7” Power Roller
Z60-36 1-1/4” Roller
Z60-36A Small Double Roller
Z60-36B Large Double Roller
Z60-40 Adjustable Strut
Z60-50 Tonehole/Body Set
(Fingertool)
96
Woodwind tools
WOODWIND TOOLS
G85 OBOE CENTER G50-G52 BASSOON TENON TOOLS
TENON TOOLS
The taper of the arbor fits clarinet bores better Using a machine lathe, this tool eliminates the
and acts as a pilot; making a more accurate cut with danger of splitting a clarinet when making cuts.
less chance of the cutter drifting off center. Maintains a straight even cut of consistent diameter.
The cutter is held in the lathe chuck and reversed Cutters are made of high speed tool steel, with
to make the step cut, if necessary. You can do a maximum chip clearance. Brass pilots can be
better finished job than by trying to thread a new machined accurately as needed to fit any desired
tenon in, or some other method. These tenons, clarinet bore.
when glued in with G19 Clear Magic, are as strong These pilots do not cause friction and so eliminate
or stronger than the original tenon was in many the danger of softening rubber or plastic. The cutters
cases. are removable and easily re-sharpened. The set
includes the following:
G71B Bell Tenon Set for Bb soprano clarinet ▪Cutter for soprano clarinet work
G71E Bell Tenon Set for Eb soprano clarinet ▪Cutter for shortening barrels
▪Facing cutter, also works on bass clarinet
REPLACEMENT CUTTERS bottom tenons
G71C Bb Clarinet Cutter for G71B ▪Four soprano clarinet pilots: one for
G71F Eb Clarinet Cutter for G71E general clarinet use, three uncut
▪Complete instructions
WOODWIND TOOLS
G76 SPECIAL OBOE ARBOR G78 CLARINET SOCKET
GRAFTING JIG
G77 BASS CLARINET ARBOR KIT Used to hold the clarinet in place so that tone
holes can be re-drilled in the same location after the
graft is installed.
New templet system makes simply using a
locating pin in a series of pre-drilled movable steel
template rings to duplicate any pattern of holes for
any brand of Bb clarinet.
An accessory for the G78 Socket Grafting Jig. G78 Socket Grafting Jig
With this 30” (76.2cm) arbor, socket grafts can now G78A Straight Cutter for Raised Tone
be performed on Bass Clarinets. Hole
The G77 Bass Clarinet Arbor comes complete with G78B Angle Cutter for Tapered Tone
three bass clarinet size tone hole alignment pilots, Hole
adjustable instrument stop and large pressure nut. G78U Update for G78- Send in old tool
G77 Special Bass Clarinet Arbor Kit
G79 SOCKET GRAFT SLEEVES
~OUR PURPOSE~ Sleeves for use with G78 Socket Grafting Jig.
E197 Pad Seat Reamers (set of 3) E81 1/4” (6.4mm) E84 3/4” (19mm)
E198 Large Pad Seat Reamers (Set of 2) E82 1/2” (12.7mm) E85 1” (25.4mm)
E83 5/8” 915.9mm)
Ferree’s Tools, Inc.
1477 E. Michigan Ave. Call 24 hours a day to place
Battle Creek, MI 49014 your order 800-253-2261
100
Woodwind tools
WOODWIND TOOLS
G86 CLARINET TONE HOLE G100 OBOE TONEHOLE
REPLACEMENT CUTTER SET REPLACEMENT CUTTER SET
D48 TRADEMARK CRAYON Set of 5 dies to close a metal pearl holder around a
pearl finger button. Made of hardened tool steel.
Gold crayon for filling in worn trademarks. Makes
the overhaul jobs really look good. Clean out
engraving using a needle spring to remove dirt and
debris from deep in the crevasses. Scuff crayon into
grooves by going across at 90 degree angle to the
groove. When cool, use a rag and a ruler to slide off
the excess and your engraving will be renewed. If
some gets into the grain, just take a few extra
moments and pick it out.
Used to place over the pearl while heating sax D113B Convex Pearls for thumb buttons
pads. Prevents scorching of pearls Sizes: 13.2, 14.8, 15.3, 16.5mm
102
Woodwind tools
WOODWIND TOOLS
G104 BASS CLARINET TONE G87 TAPERED TONE
HOLE CUTTER HOLE CUTTER
G74S For Soprano Clarinets and Oboes PILOTS FOR G87 & G86
G74A For Alto and Bass Clarinets
G74F Replacement Fly Cutter fits either G87P Pilots only for G86 & G87 ( The pilots
go in .010” (.25mm) steps from .180”
Customer satisfaction thru .500” (4.57mm thru 12.7mm). Specify size.
is always guaranteed!
Notes from customers:
Highest quality, “I just bought this fantastic tool (P1). I am
lowest prices! already having fun with my new toy and
experimenting on different problem areas of
Most items are in different flutes”...Dominique, Quebec, CA.
stock for quick
delivery!
Fax orders 24 hours a day
World’s Largest Manufacturer of Quality Band
Instrument Repair Tools
to 269-965-7719
103
WOODWIND TOOLS
WOODWIND TOOLS
WOODWIND TOOLS
J20 SWEDISH STYLE PLIERS L37 MOUTHPIECE REFACING KIT
N78 FLUTE PAD CUP TOOLS Call for availability before ordering. Sold as a
kit ONLY. We DO NOT sell the individual parts
The set consists of the Mouthpiece Refacing kit separately.
of two arbors with
a different H76 TAPERED GLUE PLUGS
diameter on each
end, making 4
Here is the easy
sizes to work
answer to a chipped
with. They were
inside edge of a
designed for two
woodwind tone hole.
purposes. First, to
Insert a Tapered Glue
straighten bowed pad cups and second, to use as
Plug in the bad tone
forming dies to straighten bent cups.
hole.
Then using the H75
N78 Flute Pad Cup Tools Hot Stuff Glue and Grenadilla Chip Kit, fill in the
chipped area. The Tapered Glue Plug keeps the repair
perfectly round like the original tone hole. All that’s
Notes from customers: left to do is smoothing and flattening the top of the
“Thanks so much for your reply. Your info tone hole. Now you have fast, virtually undetectable
helps me greatly when making a decision, repair. The delrin plug will not stick to the glue.
thanks again”...Steve.
H76 Set of two Tapered Glue Plugs
105
WOODWIND TOOLS
WOODWIND TOOLS
WOODWIND TOOLS
J14 SOLID BRASS ROD F51 CURVED NOSE PLIERS
ROUND AND SQUARE
Item # O.D Item # O.D F51 Curved Nose Pliers, 5-3/4” (146mm) long
J14A 1/8” (3.2mm) J14F 5/16” (7.9mm)
J14B 5/32” (3.96mm) J14G 3/8” (9.5mm)
F58 FLAT NOSE PLIERS
J14C 3/16” (4.8mm) J14H 7/16” (11.1mm)
J14D 7/32” (5.6mm) J14J 1/2” (12.7mm)
J14E 1/4” (6.4mm)
C o m p o u n d
leverage diagonal cutter
with a spring for extra
control. Straight cut jaws.
WOODWIND TOOLS
L20 BENCH ANVIL or F97 DUCK BILL PLIERS
LEVELING BLOCK
Used for leveling (straightening) pad cups on These high
saxophones and other woodwind instruments. Also, quality pliers are
for pressing pads flat into cups or flattening spring especially useful
ends or any other job requiring a flat, hard, ground for key bending.
surface. Rockwell hardness of 55. The extra height But seasoned
eliminates having to hold the anvil in your hand, as Repairmen tell
the keys will not normally touch the bench when us they used
using this tool. them for many
2-1/2” X 2-1/2” X 1” (63.5mm square X 25mm) other purposes. Our duck bill plier is an extremely
high quality tool. Only our volume allows us to
offer it at this price.
The jaws of this plier are flared to a width of
Picture 13/16” (20.6mm) with thin, yet very strong, tips.
shows sax
pad shellac The tool measures 7” (178mm) long and has vinyl
being cooled handles to give you a very comfortable grip.
on leveling
block.
F97 Large Duck Bill Pliers
F97A THIN JAWED
L20 Leveling Block or Bench Anvil DUCKBILL PLIER
F54 & F55 CHAIN NOSE PLIERS We took the F97 Duck Bill Pliers and ground
down one jaw, making it thinner. yet strong enough
to grab and straighten a woodwind pad cup.
WOODWIND TOOLS
F21 PRECUT TAPERED F20 KEY PIN REMOVING TOOL
PINNING NEEDLES
This is a
Replacement pinning needles come in two different very versatile
styles. The F21A is a short precut needle that will fit tool. In addition
the Selmer and Bundy flutes. The F21B is a long to flute key pin
pinning needle that fits flutes made by Armstrong, removal, many
Emerson and Gemeinhardt. The F21B long needles stubborn wood-
must be cut to length. wind springs can
also be removed
F21A Short Pinning Needles (by the dozen) with the F20 Key Pin Tool. And, you can be as fast
F21B Long Pinning Needles (by the dozen) as the factory in flute key pin removal. The set
consists of a frame, three anvils and three punches.
The brass anvils designed so that they can fit any key
configuration. Newly improved model has the punch
spring loaded for stability.
ANVILS
The short brass anvil fits most keys. If you find a
key that needs a custom fit, use the small lead filled
anvil. This is similar to the old way of removing pins
using a lead block and hand held punch. The third
anvil is tall and made of brass. Use it to reinstall the
pins when assembling the key.
PUNCHES
The three punches are made out of tool steel and
have been hardened and tempered. One punch has a
sharp point for the pins that are ground off flush with
the key. The second punch has a small flat end on the
end and the third has a concaved punching surface
which works best on pins that protrude from the key
or when reinstalling pins in the key.
INSTRUCTIONS
To use the F20 Key Pin Removal Tool, install the
proper fitting anvil into the base. Place the key on the
anvil and slide the punch down to contact the pin.
Then tap the punch to remove the pin.
www.ferreestools.com
111
Woodwind tools
WOODWIND TOOLS