Beruflich Dokumente
Kultur Dokumente
Air
RGEA16 Series
RGEA16 Series
Nominal Sizes 2-5 Tons [7.0-17.6 kW]
Efficiencies up to 16 SEER/12.4 EER
RRNL RRPL RRRL
13.0 14.0 16.0
10.6 16.05
TABLE OF CONTENTS
Unit Features & Benefits ..................................................................................3-4
Model Number Identification ..............................................................................5
Options ............................................................................................................6
General Data
RGEA16 Series..........................................................................................7-11
General Data Notes ..........................................................................................12
Gross Systems Performance Data
RGEA16 Series ........................................................................................13-16
Indoor Airflow Performance
RGEA16 Series ........................................................................................17-18
Electrical Data
RGEA16 Series ............................................................................................19
Dimensional Data ........................................................................................20-21
Typical Installations ..........................................................................................22
Accessories ................................................................................................23-31
Wiring Diagrams..........................................................................................32-33
Limited Warranty..............................................................................................34
2
Unit Features & Benefits
Air
RGEA16 Series
3
Unit Features & Benefits
Air
RGEA16 Series
RGEA16
Features Below Correspond
to Photos on Page 3
1. All models feature Scroll ® compressors for maximum effi- 10. Inside the easily accessible furnace compartment is the
ciency and quiet operation. All RGEA16 models feature draft inducer motor. This motor is specially designed for
UltraTech™ Scroll 2-Stage compressors with Comfort Alert™ quiet reliable operation. In addition to the draft inducer
diagnostics (see below), high/low pressure switches, and motor, the in-shot gas burners and manifold efficiently regu-
hard start kits. late the flow of gas for combustion. These new gas/electric
2. Louvered condenser compartment for protecting the coil units also feature direct-spark ignition and remote flame
against yard hazards and/or weather extremes. sensors for added reliability and efficiency.
3. One-piece top with a deep flange to help keep water out of 11. All units feature an internal trap on the condensate line
the unit. eliminating the need for installing an on-site external trap.
4. Supply and return air openings feature a one-inch tall flange 12. Easily accessible control box.
to prevent water migration into the ductwork. 13. Single point wiring simplifies installation.
5. Access panels have “weep holes” and channels to further 14. Our gas/electric package units feature a tubular heat
help manage water run-off. exchanger design. Tubular heat exchangers are more effi-
6. Side and down discharge options available on all models. cient and durable than older-style clamshell heat exchang-
All models are shipped ready for horizontal application. ers. Stainless Steel Heat Exchanger is a standard feature on
7. Easily accessible blower section complete with slide-out the RGEA16 and is backed by a limited lifetime warranty
blower. The RGEA16 comes standard with variable speed when installed in a residential application, and a 20 year
motor with adjustable airflow in heating and cooling. The warranty when installed in a commercial application. Two
variable speed motor also comes with a interface that allows stage gas heat is standard on the RGEA16 models.
for dehumidification when used with a humidistat or an on- 15. Thermal expansion valve standard on all models for supe-
demand dehumidification “ODD” capable thermostat. The rior superheat control, reliability, and energy efficiency at all
variable speed system is capable of 1 inch external static. operating conditions.
8. Refrigerant connections are conveniently located for easy 16. Filter drier standard on all models (not shown).
service diagnostics. 17. Rugged baserail included for improved installation and
9. Condenser and evaporator coils feature enhanced fins for handling
better heat transfer and rifled copper tubing for greater 18. Complete factory charged, wired and run tested.
efficiency. 19. Molded compressor plugs.
Comfort Alert™ Diagnostics – Faster Service And Improved Accuracy (2-Stage Models Only)
The Comfort Alert™ diagnostics module is a breakthrough innovation for troubleshooting air conditioning system failures. The module is
installed in the control box near the compressor contactor. By monitoring and analyzing data from the Scroll® compressor and the ther-
mostat demand, the module can accurately detect the cause of electrical and system related failures without any sensors. A flashing LED
indicator communicates the ALERT code and guides the service technician more quickly and accurately to the root cause of a problem.
NOTE: Module provides compressor protection and will shut down the compressor when compressor damaging conditions
are detected.
RGEA16 Models Also Feature:
– On Demand Dehumidification
– Variable speed motor with adjustable airflow in both heating and cooling to 1.0" SP static capability
– Stainless steel heat exchanger as standard
– Two stage gas heat
4
Model Number Identification
Air
RGEA16 Series
R GE A 16 036 A J V 10 2 A A X X X
Factory Installed Options
(See Next Page)
Minor Series
A = 1st Variation
Control
A = Non Communicating
Heat Configuration
2 = Two Stage
T = Two Stage Nox
Heating Capacity (MBH) [kW]
06 = 60,000 [17.6]
08 = 80,000 [23.4]
10 = 100,000 [29.3]
Drive Package
V = ECM Blower Motor
Voltage
J = 208-230V—1PH—60 Hz
C = 208-230V—3PH—60 Hz
Major Series
A = 1st Variation
Cooling Capacity (BTUH) [kW]
024 = 24,000 [7.03]
036 = 36,000 [10.55]
048 = 48,000 [14.07]
060 = 60,000 [17.59]
Series
16 = 16 SEER
Cabinet Type
A = Residential Package
Unit Type
GE = Package Gas Heat / Electric Cool
Tradebrand
R = Rheem
5
Options
Air
RGEA16 Series
6
General Data
Air
RGEA16 Series
7
General Data
Air
RGEA16 Series
8
General Data
Air
RGEA16 Series
9
General Data
Air
RGEA16 Series
10
General Data
Air
RGEA16 Series
11
General Data Notes
Air
RGEA16 Series
NOTES:
1. Cooling Performance is rated at 95° F ambient, 80° F entering dry bulb, 67° F entering wet bulb. Gross capacity does
not include the effect of fan motor heat. AHRI capacity is net and includes the effect of fan motor heat. Units are
suitable for operation in CFM range shown in airflow tables. Units are certified in accordance with the Unitary Air
Conditioner Equipment certification program, which is based on AHRI Standard 210/240 or 360.
2. EER and/or SEER are rated at AHRI conditions and in accordance with DOE test procedures.
3. Heating Performance limit settings and rating data were established and approved under laboratory test conditions
using American National Standard Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations
above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.
4. AFUE is rated in accordance with DOE test procedures.
5. Outdoor Sound Rating shown is tested in accordance with AHRI Standard 270.
12
Gross Systems Performance Data
Air
RGEA16 Series
13
Gross Systems Performance Data
Air
RGEA16 Series
14
Gross Systems Performance Data
Air
RGEA16 Series
15
Gross Systems Performance Data
Air
RGEA16 Series
16
INDOOR AIRFLOW PERFORMANCE—208 & 230 VOLTS
Nominal External Static Pressure - Inches W.C. [kPa]
Blower Size/ Motor Nominal Heating
Cooling (Side Discharge-Dry Coil)
HP [W] & Motor Capacity Motor Speed
Capacity
Type Btu/hr [kW]
Tons [kW] 0.1 [.02] 0.2 [.05] 0.3 [.07] 0.4 [.10] 0.5 [.12] 0.6 [.15] 0.7 [.17] 0.8 [.20] 0.9 [.22] 1.0 [.25]
CFM [L/s] 1137 [1537] 1156 [1546] 1173 [1554] 1181 [1557] 1192 [1563] 1200 [1566] 1192 [1563] 1190 [1562] 1206 [1569] 1197 [1565]
Heat RPM 755 868 929 994 1040 1098 1140 1212 1237 1278
Watts 177 236 270 307 336 376 404 456 477 508
CFM [L/s] 548 [1259] 561 [1265] 561 [1265] 551 [1260] 556 [1262] 541 [1255] 530 [1250] 514 [1243] 492 [1232] 477 [1225]
10 x 9 Blower
2.0 60,000 Low Cool
1/2 HP [1372 W] RPM 488 596 685 762 835 891 955 1010 1051 1101
[17.03] [117.58] (1st Stage)
ECM
Watts 38 56 72 88 105 123 139 155 168 184
CFM [L/s] 786 [1371] 805 [1380] 811 [1383] 820 [1387] 825 [1389] 822 [1388] 826 [1390] 824 [1389] 816 [1385] 809 [1382]
High Cool
RPM 573 695 751 838 908 969 1010 1082 1119 1171
(2nd Stage)
Watts 72 103 120 148 175 199 218 248 265 290
CFM [L/s] 1109 [1523] 1131 [1534] 1150 [1543] 1169 [1552] 1175 [1555] 1187 [1560] 1190 [1562] 1201 [1567] 1205 [1569] 1203 [1568]
Heat RPM 687 706 855 912 961 1009 1057 1135 1152 1212
Watts 147 157 226 254 287 317 347 397 413 456
CFM [L/s] 784 [1370] 801 [1378] 813 [1384] 820 [1387] 827 [1390] 830 [1392] 809 [1382] 806 [1380] 799 [1377] 791 [1373]
10 x 9 Blower
60,000 Low Cool
1/2 HP [1372 W] RPM 514 627 704 775 845 916 1014 1046 1097 1138
[117.58] (1st Stage)
ECM
Watts 58 84 107 127 151 178 217 229 257 276
CFM [L/s] 1124 [1530] 1144 [1540] 1167 [1551] 1183 [1558] 1197 [1565] 1204 [1568] 1205 [1569] 1237 [1584] 1231 [1581] 1230 [1580]
High Cool
RPM 697 766 866 923 975 997 1085 1110 1165 1211
(2nd Stage)
3.0 Watts 152 185 234 268 298 314 372 391 428 463
[110.55] CFM [L/s] 1295 [1611] 1309 [1618] 1331 [1628] 1362 [1643] 1353 [1639] 1359 [1641] 1365 [1644] 1358 [1641] 1365 [1644] 1360 [1642]
Heat RPM 757 869 908 940 1014 1071 1105 1151 1199 1234
Watts 209 269 294 316 365 401 417 457 495 518
80,000
CFM [L/s] 797 [1376] 804 [1379] 809 [1382] 810 [1382] 812 [1383] 785 [1370] 778 [1367] 766 [1362] 755 [1356] 737 [1348]
10 x 9 Blower [123.44]
Low Cool
3/4 HP [1559 W] & RPM 572 650 724 791 856 938 995 1049 1091 1138
(1st Stage)
ECM 100,000
Watts 77 94 116 133 155 184 203 226 243 264
[129.3]
CFM [L/s] 1185 [1559] 1199 [1566] 1211 [1572] 1229 [1580] 1241 [1586] 1242 [1586] 1254 [1592] 1241 [1586] 1238 [1584] 1236 [1583]
High Cool
RPM 730 798 857 930 995 1032 1099 1141 1173 1202
(2nd Stage)
Watts 175 206 237 274 311 336 377 405 422 441
CFM [L/s] 1295 [1611] 1309 [1618] 1331 [1628] 1362 [1643] 1353 [1639] 1359 [1641] 1365 [1644] 1358 [1641] 1365 [1644] 1360 [1642]
Heat RPM 757 869 908 940 1014 1071 1105 1151 1199 1234
Watts 209 269 294 316 365 401 417 457 495 518
80,000
CFM [L/s] 1032 [1487] 1045 [1493] 1053 [1497] 1058 [1499] 1058 [1499] 1066 [1503] 1068 [1504] 1056 [1498] 1046 [1494] 1037 [1489]
10 x 9 Blower [123.44]
4.0 Low Cool
3/4 HP [1559 W] & RPM 714 775 837 900 946 1006 1059 1087 1135 1187
[114.07] (1st Stage)
ECM 100,000
Watts 137 160 186 214 235 267 293 309 335 362
[129.3]
Air
CFM [L/s] 1594 [1752] 1609 [1759] 1609 [1759] 1610 [1760] 1612 [1761] 1611 [1760] 1614 [1762] 1613 [1761] 1583 [1747] 1525 [1720]
High Cool
RPM 980 1044 1083 1130 1167 1202 1247 1281 1317 1326
(2nd Stage)
Watts 396 445 477 516 549 580 618 652 665 652
Notes: All airflows listed (except the 5 ton high cool) can be adjusted by +/-10% using the dip switches on the ECM interface board located in the blower section. See ECM Motor
Interface Control and Settings Section of before making adjustments. The +10% setting of the 5 ton high cool is not available to prevent water blow-off.
RGEA16 Series
17
Indoor Airflow Performance
INDOOR AIRFLOW PERFORMANCE—208 & 230 VOLTS
Nominal External Static Pressure - Inches W.C. [kPa]
18
Blower Size/ Motor Nominal Heating
Air
CFM [L/s] 1258 [1594] 1280 [1604] 1279 [1604] 1297 [1612] 1306 [1616] 1310 [1618] 1312 [1619] 1312 [1619] 1313 [1620] 1320 [1623]
12 x 9 Blower
5.0 100,000 Low Cool
1 HP [1746 W] RPM 649 674 795 846 883 939 956 999 1038 1069
117.59] [129.3] (1st Stage)
ECM
Watts 190 209 275 314 340 388 399 435 465 494
Indoor Airflow Performance
CFM [L/s] 1871 [1883] 1871 [1883] 1866 [1881] 1886 [1890] 1908 [1900] 1875 [1885] 1921 [1907] 1907 [1900] 1906 [1900] 1909 [1901]
High Cool
RPM 907 956 1016 1048 1084 1106 1151 1197 1209 1241
(2nd Stage)
Watts 563 626 709 750 795 831 897 962 979 1030
Notes: All airflows listed (except the 5 ton high cool) can be adjusted by +/-10% using the dip switches on the ECM interface board located in the blower section. See ECM Motor
Interface Control and Settings Section of before making adjustments. The +10% setting of the 5 ton high cool is not available to prevent water blow-off.
Phase 1 3 1 3 1 3 1
Hz 60 60 60 60 60 60 60
Minimum Circuit Ampacity 18 19 25 22 31 27 40
Minimum Overcurrent
20 20 30 25 40 30 45
Protection Device Size
Maximum Overcurrent
25 25 40 35 50 40 60
Protection Device Size
No. 1 1 1 1 1 1 1
Compressor Motor
19
Dimensional Data
Air
RGEA16 Series
OUTDOOR FAN
GRILLE &
COMPRESSOR
ACCESS
OUTDOOR COIL
PROTECTIVE
GRILLE
CORNER WEIGHTS
% OF TOTAL 30% ± 2%
LIQUID PRESSURE UNIT WEIGHT
SERVICE PORT
SUCTION PRESSURE
SERVICE PORT FLUE
EXHAUST
THREADED PVC 21% ± 2%
CONDENSATE DRAIN 29% ± 2%
CONNECTION (3/4 N.P.T.) FLUE EXHAUST HOOD
FIELD CONTROL
WIRE ENTRANCE COMBUSTION AIR 20% ± 2%
INLET HOOD
FIELD POWER
WIRE ENTRANCE SIDE RETURN
DUCT OPENING
BLOWER/
EVAPORATOR
ACCESS PANEL
SIDE SUPPLY
DUCT OPENING
451/16"
[1145 mm]
479/16" INSIDE
[1208 mm] 13/16"
[30 mm]
TYP.
11/2"
[38 mm]
TYP.
BOTTOM
RETURN
DUCT
OPENING
5013/16" 153/8" 497/16"
[1290 mm] 191/2" [391 mm] [1256 mm]
[495 mm] INSIDE
BOTTOM
SUPPLY
DUCT
141/4" OPENING
[362 mm]
TYP.
49/10"
[125 mm]
20
Dimensional Data
Air
RGEA16 Series
FLUE
EXHAUST
HOOD
GAS SUPPLY
ENTRANCE
1015/16"
[278 mm]
527/16"
[1332 mm]
BLOWER/
111/16" EVAPORATOR
[42.9 mm]
ACCESS PANEL
SIDE SUPPLY
DUCT OPENING
191/8"
[486 mm]
15"
[381 mm]
47/8"
[124 mm]
15
35 /16"
227/8" [897 mm]
[581 mm]
133/4"
[349 mm]
15 TYP.
13 /16"
[338 mm] 1314"
75/16" [337 mm]
[186 mm] 57/16"
21/2" [63.5 mm] [138 mm]
2211/16"
[576 mm] 47/16"
[113 mm]
471/2"
[1207 mm] 81/2" 143/16"
SIDE RETURN
[216 mm] [360 mm] DUCT OPENING
TYP. TYP.
Model:
“A” Height
RGEA16
024 3515/16"
036, 048,
41"
[ ] Designates Metric Conversions 060
21
Typical Installations
Air
RGEA16 Series
22
Accessories
Air
RGEA16 Series
ACCESSORY EQUIPMENT
Accessory Description Model Application Accessory Model No.
Thermostats RGEA16 See Thermostat Specification Sheet (T11-001)
RXSG-AAA08 (8" [203 mm] Height)
Roofcurbs RGEA16 RXSG-AAA14 (14" [356 mm] Height)
RXSG-AAA24 (24" [610 mm] Height)
Supply & Return Diffusers RGEA16 RXRN-BD15
Economizers (Sideflow Only) RGEA16 AXRD-CCM10 (Fully Modulating)
Economizers (Downflow Only) RGEA16 AXRD-CAM10 (Fully Modulating)
AXRF-FAB1 (Motorized-35%)
Fresh Air Damper RGEA16
AXRF-FAA1 (Fixed-35%)
RXMC-CA02 (16" [406 mm] Ducts)
Rectangular to Round Transition (Downflow) RGEA16
RXMC-CA03 (18" [457 mm] Ducts)
Filter Kit RGEA16 RXRY-B01
Sideflow Rectangular to Round Transition RGEA16 RXMC-BA01
LP Conversion Kits RGEA16 RXGJ-FP35
Low Ambient Control RGEA16 RXRZ-B01
Canadian High Altitude Kit (for Natural Gas only1) RGEA16 RXRX-AH01
Dehumidistat RGEA16 41-25066-02 (Available through PROSTOCK)
1 If a particular unit is to be converted to operate on LP (propane) for elevations above 2000 ft. [609.6 m] in Canada, the existing Natural Gas to LP Conversion Kits for the subject
models already contain the necessary orifices and instructions to de-rate the input for 2000-4500 ft. [609.6-1371.6 m] Canadian applications.
2 High and low pressure switches are standard for RGEA16 Models. [ ] Designates Metric Conversions
COMMON SUPPLY/RETURN
CONCENTRIC AIR DIFFUSER
SUPPLY/RETURN DIFFUSER
NOTE: The location of the combination supply and return diffuser should
not exceed 10 feet [3.05 m] above the floor level for units @ 1000 CFM
[472 L/s] or less and 12 [3.66 m] to 14 feet [4.27 m] above the floor level
for units with CFM greater than 1000 [472 L/s]. If the diffuser is installed
with a greater distance than recommended above, the supply air may
become stratified above the required comfort area causing uncomforta-
ble conditions.
AIRFLOW/PRESSURE DROP
INFORMATION (INCHES W.C. [kPa])
Designed to convert a side by side or an over and under arrange- Approximate CFM [L/s]-Supply Air
ment into a concentric distribution of air. The diffuser is flush Accessory
1300 [614] 1575 [743] 1800 [850] 2200 [1038]
mounted, completely insulated, assembled, and internally baf-
Plenum & Supply/Return Duct .07 [.017] .10 [.024] .12 [.030] .17 [.042]
fled to provide four way supply air distribution with a center
return. To make the assembly complete and ready to fit into a 2' Diffuser .09 [.022] .13 [.032] .16 [.040] .24 [.060]
[0.61 m] x 4' [1.22 m] suspended ceiling grid, the diffuser Economizer .06 [.015] .09 [.022] .11 [.027] .17 [.042]
includes adjustable supply louvers, hanging rings, anti-sweat
gasket, and round flanges for use with flexible ducts. SUPPLY AIR/PERFORMANCE
Model No. Diameter Shipping Wt. Dimension A Diffuser Airflow CFM [L/s] Range of Throw Ft. [m]
RXRN- Inches [mm] Lbs. [kg] Inches [mm] 800 [378]-1200 [566] 14 [4.27]-16 [4.88]
BD15 16 [406] 90 [40.82] 201/2 [521] 1600 [755]-2000 [944] 18 [5.49]-28 [8.53]
23
Accessories
Air
RGEA16 Series
THERMOSTATS
200-Series *
Programmable
300-Series *
Deluxe
Programmable
GE=Gas/Electric
UN=Universal (AC/HP/GE)
200=Programmable SS=Single-Stage
RHC=Rheem TST=Thermostat MD=Modulating Furnace
300=Deluxe Programmable MS=Multi-Stage
DF=Dual Fuel
CM=Communicating
24
Accessories
Air
RGEA16 Series
DUCT ADAPTERS
RECTANGULAR TO ROUND
TRANSITIONS (DOWNFLOW)
RXMC-CA02
RXMC-CA03
25
Accessories
Air
RGEA16 Series
ECONOMIZERS
AXRD-CAM10 (Fully Modulating)
AXRD-CAM10 (Fully Modulating)
Provided with enthalpy control, mixed
air sensor and minimum position
potentiometer for proportioning (mod-
ulating) the amount of fresh air.
NOTE: See economizer installation
instructions for correct filter access door.
26
Accessories
Air
RGEA16 Series
ECONOMIZERS
AXRD-CCM10 (Fully Modulating)
Horizontal Application
AXRD-CCM10 (Fully Modulating)
Provided with enthalpy control, mixed
air sensor and minimum position poten-
tiometer for proportioning (modulating)
the amount of fresh air.
27
Accessories
Air
RGEA16 Series
28
Accessories
Air
RGEA16 Series
29
Accessories
Air
RGEA16 Series
RXSG-AAA08
(8" [203 mm] High)
RXSG-AAA14
(14" [356 mm] High)
RXSG-AAA24
(24" [610 mm] High)
30
Accessories
Air
RGEA16 Series
ROOFCURB ADAPTERS
Fabricated from galvanized steel to adapt the New cabinet to
the old style curb. All are furnished with a New gasket.
OLD MODEL OLD CURB MODEL NEW MODEL TO OLD MODEL NEW MODEL PACKAGE
ROOFCURB ADAPTER
SMALL CABINET
RXPA-CA20 (1)
(11/2-2 TON) [5.28-7.03 kW]
20 SERIES RXRA-DB20 (2)
RSNC-, RSND-, RSNE-
RRGE-, RRGF-, RRGG-, RSNY
ONLY 1 CABINET SIZE—
MEDIUM CABINET ALL MODELS
RXPA-CA21 (1) RXPX-BACCA20
(21/2-3 TON) [8.79-10.55 kW]
21 SERIES RXRA-DB21 (2) RXRX-BACDB20
RSNC-, RSND-, RSNE-
RXPX-BACCA21
RRGE-, RRGF-, RRGG-, RSNY
RXRX-BACDB21 RGEA
RXPX-BCCCA22
LARGE CABINET RXPA-CA22 (1)
RXRX-BCCDB22
(3-31/2 TON) [10.55-12.31 kW] 22 SERIES RXRA-DB22 (2)
RXPX-BCCCA23
RRGE-, RRGF-, RRGG-, RSNY
RXRX-BCCDB23
EXTRA LARGE CABINET
(31/2-5 TON) [12.31-17.6 kW] RXPA-CA23 (1)
RSNC-, RSND-, RSNE- 23 SERIES RXRA-DB23 (2)
RRGE-, RRGF-, RRGG-, RSNY
(4-5 TON) [14.07-17.58 kW]
(1) SLOPE TYPE
(2) FULL PERIMETER TYPE
31
Wiring Diagrams
Air
RGEA16 Series
32
Wiring Diagrams
Air
RGEA16 Series
33
Limited Warranty
Air
RGEA16 Series
BEFORE PURCHASING THIS APPLIANCE, READ IMPORTANT ENERGY COST AND EFFICIENCY INFORMATION AVAILABLE FROM
YOUR RETAILER.
34
Notes
Air
RGEA16 Series
35
The new degree of comfort.™
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Fort Smith, Arkansas 72917 • www.rheem.com Brampton, Ontario • L6Y 0P5