Beruflich Dokumente
Kultur Dokumente
1- Which of the four aircrafts in a320 series has maximum endurance with respect to MTOW?
a- A319
b- A320
c- A318
2- Which one of the following aircraft has Rolls Royce engines installed on it?
a- A320-210
b- A320-240
c- A320-214
3- Which one of the aircraft mentioned below has thrust rating of 33000 lbs?
a- A320-213
b- A320-214
c- A320-314
5- For measurements and location of components within the fuselage X is used as:
a- Defines fore and aft distances from buttock point (STA) to STA " 0 ".
b- Defines fore and aft distances from reference point (STA) to STA " 0 ".
c- Defines fore and aft distances from any point (STA) to STA " 0 ".
9- STA230 is on:
a- Front of left wing as compare to STA240
b- Front of lower fuselage as compare to STA240
c- Front of upper fuselage as compare to STA240
10- The cabin passenger / crew doors, cargo compartment and main landing gear doors are only
identified by the zone number
a- Since each of these doors is a same station.
b- since each of these doors is a zone in itself
c- Since each of these doors is a sub assembly.
14- The reference (X=0) for all structural measurements in the X-axis is:
a- Located 2.54 cm forward of the aircraft.
b- Located 100 cm forward of the aircraft.
c- Located 2.54 m forward of the aircraft.
23- When leveling the aircraft, which position relates to zero longitudinal and zero transverse angle.
a- D4
b- A4
c- D3
25- During towing, shock absorber travel should not be more than :
a- 11.8 inches
b- 11 inches
c- 11.6 feet
26- The maximum authorized steering angle on each side of the aircraft centerline is limited to:
a- 90 degrees
b- 95 degrees
c- 40 degrees
29- What type of labels are place in skydrol zones with white letters on black matt finish?
a- Standard type no.1
b- Standard type no. 2
c- FOTOFOIL type no. 3
30- The use of self propelled conveyor belt is not recommended on a318 by airbus because:
a- Close proximity of door to engine intake
b- Cargo compartment not designed for self propelled conveyor
c- Manual loading is comparatively fast
31- What manual covers all Airbus aircraft specific tools and all associated documentation?
a- AMM
b- TSM
c- Support equipment summary