Sie sind auf Seite 1von 38

INSTALLATION.

SYSINSTAL

Installation
SOMMAIRE
I. CHARGEMENT DE LA PROCÉDURE D'INSTALLATION............................. 5
II. CHOIX DES PRODUITS A INSTALLER ....................................................... 6
III. PARAMÈTRAGE DES PRODUITS INSTALLÉS.......................................... 8
III.1. PARAMETRAGE PERSONNALISE - PARAMETRES GENERAUX .............................. 9
III.2. PARAMÉTRAGE PERSONNALISÉ - TAILLE POUR FICHIER IMPRIMANTE (PRTF).................... 10
III.3. PARAMETRAGE PERSONNALISE - BIBLIOTHÈQUE AVANT QSYS ............................... 11
III.4. PARAMÉTRAGE PERSONNALISÉÉ - AJOUT BIBLIOTHÈQUE DANS SYSTÈME 400.................... 12
III.5. PARAMETRAGE PERSONNALISE - PROFIL POUR ACCÉDER AUX PRODUITS................. 13
III.6. PARAMETRAGE PERSONNALISE - PRODUIT SYSBAO............................................. 14
III.7. PARAMETRAGE PERSONNALISE - PRODUIT SYSREZO .......................................... 16
IV. CONVERSION DES ACCENTS ................................................................. 17
V. UTILISATION DES PRODUITS .................................................................. 18
VI. CONSULTATION DES PRODUITS INSTALLÉS ....................................... 19
VII. INSTALLATION DU MULTI-LANGUES .................................................... 20
VIII. LOADING THE INSTALLATION PROCEDURE ...................................... 23
IX. CHOICE OF THE PRODUCTS TO INSTALL............................................. 24
X. SET-UP THE INSTALLED PRODUCTS ..................................................... 26
X.1. CUSTOMISED SET-UP - GENERAL PARAMETERS....................................................... 27
X.2. CUSTOMISED SET-UP - PRINTER FILE SIZE (PRTF) ................................................... 28
X.3. CUSTOMISED SET-UP - LIBRARY BEFORE QSYS ........................................................ 29
X.4. CUSTOMISED SET-UP - ADDITION OF A LIBRARY TO SYSTEME400...................... 30
X.5. CUSTOMISED SET-UP - PROFILE TO ACCESS TO THE PRODUCTS ........................................ 31
X.6. CUSTOMISED SET-UP - SYSBAO....................................................................................... 32
X.7. CUSTOMISED SET-UP - SYSREZO ..................................................................................... 34
XI. ACCENT CONVERSION............................................................................ 35
XII. USE OF THE PRODUCTS ........................................................................ 36
XIII. DISPLAY INSTALLED PRODUCTS ........................................................ 37
XIV. MULTI-LANGUAGE INSTALLATION..................................................... 38

Page 2
Page 3
Préambule

Ce document livré en même temps que le support magnétique contenant les produits, doit
aider le client à installer les bibliothèques correspondantes aux produits commandés et à
modifier les paramètres d'utilisation.

Il est demandé de respecter scrupuleusement les étapes définies dans ce dossier.

Page 4
I. CHARGEMENT DE LA PROCEDURE D'INSTALLATION

Sous le profil QSECOFR ou un profil équivalent (*SECADM) :

Exécutez la commande LODRUN en précisant le nom de l'unité sur laquelle vous avez
monté le support contenant les produits (par touche F4).

Une fois cette procédure de chargement exécutée, vous voyez apparaître un écran d'accueil
avec un menu.
Ce menu vous permet d'accéder aux différentes fonctions décrites ci-après.

L'accès à ce menu peut aussi se faire plus tard par l'appel de la commande SYSINSTAL
après ajout de la bibliothèque SYSINSTAL en liste de bibliothèques (ADDLIBLE...).

SYSTEMA / D10 / 4433306


++++++ +++++ +++++
++++++++ +++++++ +++++++
++++++++++ +++++++++ +++++++++
++++ ++++ ++++ ++++ ++++ ++++
¦¦¦¦¦¦ ¦ + ¦ ¦¦¦¦¦¦¦ ¦¦¦¦¦¦¦¦ ¦¦¦¦¦¦¦¦ ¦¦ ++ +¦ ¦¦¦¦¦¦¦
¦ ¦ + ¦ ¦ ++++ + ¦ + ¦ ++ +++ ¦ ¦ ¦¦+ ¦
¦ ¦ + ¦ + ¦ ++++ + ¦ ¦ ++ +++ ¦ ¦ ¦ ¦ ¦
¦¦¦¦¦ ¦¦¦ + ¦¦¦¦¦ + + ¦ ¦¦¦¦¦¦ + ¦ ¦¦¦ ¦ ¦¦¦¦¦
¦ + ¦ ++ + ¦ + ¦ ¦ o ++ ++¦+ +¦ ¦
¦ ++ ¦ ++++++++++ ¦ ++ ¦ + ¦ o + +¦+ +++¦ ¦
¦¦¦¦¦¦ ++ ¦ ++ ¦¦¦¦¦¦ +++ ¦ +++ ¦¦¦¦¦¦¦¦ ¦ +++ ¦ ¦¦¦¦¦¦¦
++++++++++++++++++++ +++++++ +++++++
+++++ +++++ +++++
La Societé SOPRA SYSTEMES vous propose de sélectionner
les produits que vous souhaitez installer.

1 Installation des produits


2 Paramétrage des produits installés (après restauration)
3 Conversion des accents
4 Liste des produits installés
5 Paramétrage du Multi-langues
Votre Choix: _

F3=Exit F13=Travaux soumis F21=Entrée commandes

Lors de l’accès à cet écran, on met la MSGQ SYSINSTAL/SYSINSTAL en break.

Page 5
II. CHOIX DES PRODUITS A INSTALLER

Pour installer un ou plusieurs produits, vous devez appeler l'option 1 du menu SYSINSTAL.

INST010E / SYSTEMC Choix des produits à installer 05/05/96


13:18:19
1=Choisir
Opt____Produit_________Libellé____________________Info_______________________
_ SYSBAO BOITE A OUTILS
_ SYSAUTO AUTOMATE EXPLOITATION
_ SYSMDM GESTION DES MESSAGES
_ SYSOTEK GESTION DES SAUVEGARDES
_ SYSAVE GESTION MODE RESTREINT
_ SYSREZO GESTION TRANSFERTS
_ SYSFOCAL CONSOLE FEDERATRICE
_ SYSVIAL GESTION DES MENUS
_ SYSGET GESTION MAINTENANCE
_ SYSETA GESTION DES SPOOLS
_ SYSBKUP MIRRORING DE SYSTEMES
_ SYSEDIT GESTION DES SPOULES
_ SYSALPHA GESTION ALPHAPAGE
_ SYSCOMX MIDDLEWARE

____________________________________________________________________________

F3=Exit

Cet écran vous permet de sélectionner les produits à installer sur votre AS400. Notez bien
que l'on va choisir ici les nouveaux produits à installer, donc non encore présents sur votre
AS400.

Les produits SYSBAO et SYSREZO/SYSFOCAL sont systématiquement livrés avec chacun


des produits de la gamme SYSTEME 400. Ceci a pour conséquence:

- Si vous avez déjà un produit de la gamme, SYSBAO et SYSFOCAL doivent être


normalement installés sur votre site et il est inutile de les restaurer à nouveau (Il ne sera
d'ailleurs pas possible de les réinstaller sous un même nom).

- Si vous n'avez aucun produit de la gamme, vous devez sélectionner ces produits en
même temps que les produits à installer.

Page 6
Après avoir sélectionné les produits, vous devez préciser le nom de l'unité sur laquelle vous
avez monté le support magnétique contenant les produits.

INST010E Choix Bibliothèques pour installation Produits 05/05/96


13:18:34
Nom de l'unité utilisée....... TAP01_____

F3=Exit F12=Précédent

Pour chaque produit, nous vous signalons les bibliothèques qui vont être installées.

INST010E Choix Bibliothèques pour installation Produits 05/05/96


13:18:34
Nom de l'unité utilisée....... TAP01

Liste_des_Produits_à_installer_______Nom_Bibliothèque_à_installer____________
SYSBAO BOITE A OUTILS -----------> SYSBAO
SYSAUTO AUTOMATE EXPLOITATION -----------> SYSAUTO
SYSMDM GESTION DES MESSAGES -----------> SYSMDM
SYSOTEK GESTION DES SAUVEGARDES -----------> SYSOTEK
SYSAVE GESTION MODE RESTREINT -----------> SYSAVE
SYSGET GESTION MAINTENANCE -----------> SYSGET
SYSREZO GESTION TRANSFERTS -----------> SYSREZO
SYSFOCAL CONSOLE FEDERATRICE -----------> SYSREZO

_____________________________________________________________________________

F3=Exit F12=Précédent

Si vous validez cet écran (par la touche ENTREE), on va alors soumettre un traitement
(BATCH) de restauration des produits sur votre système. (le travail RST-LIB).

Vous devez attendre la fin de ce travail avant de passer à la fonction suivante


(paramétrage...).

Un message est envoyé dans la MSGQ SYSINTAL/SYSINSTAL des la fin de la


restauration.

Nota :
Suivant le nombre de produits à installer et la charge de votre AS/400, cette restauration
peut durer entre trente minutes et une heure.

Page 7
III. PARAMETRAGE DES PRODUITS INSTALLES

Pour obtenir l'écran de paramétrage des produits installés, vous devez appeler l'option 2 du
menu SYSINSTAL.

Vous pouvez demander un paramétrage automatique ou personnalisé.

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: :
: :
: :
: :
: 1 - Paramétrage automatique. :
: :
: 2 - Paramétrage personnalisé. :
: :
: Votre Choix: 2 :
: F3=Exit :
: :
+------------------------------------------------------------+ r
les produits que vous souhaitez installer.

1 Installation des produits


2 Paramétrage des produits installés (après restauration)
3 Conversion des accents
4 Liste des produits installés
Votre Choix: 2

F3=Exit F13=Travaux soumis F21=Entrée commandes

Nous vous conseillons d'effectuer un paramétrage personnalisé. Dans certains cas , à la


demande de nos services d’assistance vous pouvez être amenés à effectuer un
paramétrage automatique.

Page 8
III.1. PARAMETRAGE PERSONNALISE - PARAMETRES GENERAUX

Pour obtenir l'écran de paramétrage des produits installés, vous devez appeler l'option 2 du
menu SYSINSTAL.

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
: : :
: : :
: : :
: : Format Date Produit........ : DMY DMY, MDY, YMD :
: : Séparateur Date............ : / :
: : Séparateur Heure........... : : :
: : Protocole pour SYSREZO..... : 0 0=SNA, 1=TCP/IP :
: : Bibliotèque MSGQ du Profil : QGPLTEMP :
: : :
+ : :
: F3=Exit F12=Précédent :
: :
+------------------------------------------------------------+
2 Paramétrage des produits installés (après restauration)
3 Conversion des accents
4 Liste des produits installés
Votre Choix: 2

F3=Exit F13=Travaux soumis F21=Entrée commandes

Nota :
Cette fonction est accessible à tout moment par la suite si vous voulez remodifier certains
paramètres.

Le premier écran permet de définir les points communs à tous les produits.

- Format date Produit :


Nos produits sont compatibles avec tous les formats de date (DMY, MDY, YMD). Il est
possible, sans agir sur le format de la date système (QDATFMT) de choisir le format sous
lequel vous souhaitez travailler dans nos produits.

- Séparateur date :
Sous le même principe que le format de date, il vous est possible de choisir le séparateur de
date pour l'affichage des dates dans les produits SYSTEME 400 (Sans agir sur la valeur
système QDATFMT).

- Séparateur heure :
Il est aussi possible de choisir le séparateur d'heure pour l'affichage des heures dans les
produits SYSTEME 400.

Page 9
- Protocole pour SYSREZO :
Si la version TCP/IP de SYSREZO ( SYSDST) a été installée sur votre système, le type de
protocole est accessible, sinon l’accès est verrouillé. Indiquer 0 pour une distribution par
SNA ou 1 pour une distribution par TCP/IP.

- Bibliothèque MSGQ du Profil :


Lorsque l’on rentre dans nos produits, une MSGQ est crée temporairement dans une
bibliothèque. Vous indiquez le nom de cette bibliothèque.

III.2. Paramétrage Personnalisé - Taille pour fichier imprimante (PRTF)

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
: : +------------------------------------------------------------+
: : : SYSTEMA Taille pour fichier Imprimante 3/05/96 :
: : : :
: : : :
: : : Lignes par page............ : 051 Nombre :
: : : No Ligne fin de page....... : 050 Nombre :
: : : Qualité d'impression....... : *DRAFT *STD, *DRAFT,... :
: : : :
: : : :
+ : : :
: : :
: : F3=Exit F12=Précédent :
+ : :
+------------------------------------------------------------+ ration)
3 Conversion des accents
4 Liste des produits installés
Votre Choix: 2

F3=Exit F13=Travaux soumis F21=Entrée commandes

En fonction du format du papier que vous allez utiliser, vous pouvez préciser la taille des
pages (nombre de lignes) et le numéro de ligne de la fin de page. Ceci sera répercuté sur
tous les états des produits installés.
(Valeurs proposées : nombre de lignes = 51 n° ligne = 45)

et Appuyez sur ENTREE pour valider et afficher l'écran suivant.

Page 10
III.3. PARAMETRAGE PERSONNALISE - Bibliothèque avant QSYS

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
: : +------------------------------------------------------------+
: : : SYSTEMA Taille pour fichier Imprimante 3/05/96 :
: : : +------------------------------------------------------------+
: : : : SYSTEMA Bibliothèque avant QSYS 3/05/96 :
: : : : :
: : : : Faut-il inclure: :
: : : : Commandes SAV*, RST* de SYSOTEK... : 1 0=non, 1=oui :
: : : : Commande SBMJOB de SYSAUTO........ : 1 0=non, 1=oui :
: : : : :
+ : : : Nom de la bibliothèque..... : EXPSOPRA *NONE, Nom :
: : : Création de la bibliothèque : 0 0=non, 1=oui :
: : : :
+ : : F10=Modification SYSLIBL :
+ : F3=Exit F12=Précédent : tion)
: :
+------------------------------------------------------------+
Votre Choix: 2

F3=Exit F13=Travaux soumis F21=Entrée commandes

Cet écran permet de préciser :

Þ Si vous installez SYSAUTO :


Si on veut regrouper les commandes SBMJOB dans une seule bibliothèque en précisant le
nom de cette bibliothèque (dans le cas d'une interception des travaux batch utilisateurs).

Þ Si vous installez SYSOTEK :


Si on veut regrouper les commandes SAV* et RST* dans une seule bibliothèque en
précisant le nom de cette bibliothèque.

Dans ce cas, vous saisissez le nom de la bibliothèque que vous allez placer avant QSYS.
Cette bibliothèque peut être une bibliothèque déjà existante sur votre système. Si ce n'est
pas le cas, vous demanderez la création. Utilisez ensuite la touche de fonction F10, pour
ajouter cette bibliothèque avant QSYS.

Page 11
III.4. Paramétrage Personnaliséé - Ajout Bibliothèque Dans Système 400

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
: : +------------------------------------------------------------+
: : : SYSTEMA Taille pour fichier Imprimante 3/05/96 :
: : : +------------------------------------------------------------+
: : : : SYSTEMA Bibliothèque avant QSYS 3/05/96 :
: : : : +------------------------------------------------------------+
: : : : : SYSTEMA Ajout bibliothèques dans SYSTEME400 3/05/96 :
: : : : : :
: : : : : Vous pouvez saisir 3 bibliothèques à ajouter: :
: : : : : :
+ : : : : Bibliothèque.................. : EXPOUTIL Nom, Blanc :
: : : : Bibliothèque.................. : Nom, Blanc :
: : : : Bibliothèque.................. : Nom, Blanc :
+ : : : :
+ : : : on)
: : :
+ : F3=Exit F12=Précédent :
: :
+------------------------------------------------------------+
F3=Exit F13=Travaux soumis F21=Entrée commandes

Il est possible d'ajouter dans nos descriptions de travail jusqu'à 3 bibliothèques. Ces
bibliothèques seront donc en lignes dans tous les batchs soumis par nos produits ainsi que
lorsque vous travaillerez sous le profil SYSSOPRA.

Ces 3 bibliothèques doivent exister si elles sont renseignées.

Page 12
III.5. PARAMETRAGE PERSONNALISE - Profil pour accéder aux produits

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
: : +------------------------------------------------------------+
: : : SYSTEMA Taille pour fichier Imprimante 3/05/96 :
: : : +------------------------------------------------------------+
: : : : SYSTEMA Bibliothèque avant QSYS 3/05/96 :
: : : : +------------------------------------------------------------+
: : : : : SYSTEMA Ajout bibliothèques dans SYSTEME400 3/05/96 :
: : : : : +----------------------------------------------------------+
: : : : : : SYSTEMA Profil / accès aux produits 3/05/96 :
: : : : : : :
+ : : : : : :
: : : : : Profil utilisateur......... : SYSSOPRA :
: : : : : Jobd du profil............. : SYSBAO :
+ : : : : Bibliothèque............ : SYSBAO :
+ : : : : on)
: : : :
+ : : F3=Exit F12=Précédent :
: : :
+ +----------------------------------------------------------+
F3=Exit F13=Travaux soumis F21=Entrée commandes

C'est le profil SYSSOPRA qui est proposé.


Si ce profil n'existe pas, il sera créé avec les valeurs par défaut.

INLPGM : VIALINIC
SPCAUT : *ALLOBJ *SAVSYS
PTYLMT : 1
JOBD : SYSBAO/SYSBAO
ATNPGM : QUSCMDLN

- Jobd & bibliothèque :


Valeurs proposées :
JOBD : SYSBAO.
bibliothèque : SYSBAO.
Si vous souhaitez utiliser une jobd particulière, vous pourrez alors renseigner ces données
après l'installation.

Les paramètres généraux étant maintenant renseignés, vous devrez renseigner le


paramétrage de chaque produit installé.

Page 13
III.6. PARAMETRAGE PERSONNALISE - PRODUIT SYSBAO

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMC Paramétrage des produits installés 3/05/96 :
+----------------------------------------------------------+ ----+
: Initialisation système / Boite à outils : 6 :
: S Y S B A O : ------+
: : /96 :
: Nom système logique local............... : SYSTEMC___ : --------+
: Adresse SNADS........................... : SYSTEMC_ : 05/96 :
: Nom physique correspondant (SYSNAME).... : SYSTEMC : ----------+
: : 3/05/96 :
+----------------------------------------------------------+ ----------+
: : : Vérification des objets de SYSBAO... :
: : : :
+ : +----------------------------------------------------------------+
: : : : Bibliothèque............ : SYSBAO :
+ : : : :
: : : :
+ : : :
: : : on)
+ : F3=Exit F12=Précédent :
: :
+------------------------------------------------------------+
F3=Exit F13=Travaux soumis F21=Entrée commandes

- Nom système logique local :


Par défaut, c'est le SYSNAME qui est affiché.

- Adresse SNADS :
Indiquer ici le nom que vous utilisez pour SNADS.

- Nom physique correspondant (SYSNAME) :


Cette zone n'est pas modifiable. Elle est affichée pour information.

Page 14
Un autre écran permet de préciser si on souhaite afficher le nom du système et le menu
dans le cadre des menus affichés par SYSBAO:

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
+-----------------------------------------------------------------------------+
: Mise à jour d'un produit installé :
: :
: S Y S B A O :
: :
: :
: :
: Affichage Nom du Système dans les menus. 1 1=Oui, 2=Non :
: :
: F3=Exit :
: :
+-----------------------------------------------------------------------------+
+ : : : : Bibliothèque............ : SYSBAO :
+ : : : : on)
: : : :
+ : : F3=Exit F12=Précédent :
: : :
+ +----------------------------------------------------------+
F3=Exit F13=Travaux soumis F21=Entrée commandes

Page 15
III.7. PARAMETRAGE PERSONNALISE - PRODUIT SYSREZO

Cet écran apparaîtra uniquement si vous avez indiqué que vous utilisez SYSREZO.

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Paramétrage des produits installés 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA Paramètres généraux 3/05/96 :
+-----------------------------------------------------------------------------+
: -------- Mise à jour d'un produit installé ------- :
: :
: S Y S R E Z O :
: :
: :
: Ce système est-il FOCAL ? . . . . . . . 1 0=non, 1=oui :
: :
: :
: F3=Exit :
: :
+-----------------------------------------------------------------------------+
: : : :
+ : : :
: : : on)
+ : F3=Exit F12=Précédent :
: :
+------------------------------------------------------------+
F3=Exit

- Ce système est-il focal :


Vous indiquez ici, si vous installez un site distant ou le site focal.

Page 16
IV. CONVERSION DES ACCENTS

Cette fonction permet de convertir les produits SOPRA Systèmes suivant une table de
conversion.

En effet, ces produits utilisent le jeu de caractères FRANCAIS !

Si votre AS/400 utilise le jeu de caractères FRANCAIS INTERNATIONAL, vous rencontrerez


des problèmes d’affichage sur les accents ou certains autres caractères.

Vous pouvez donc utiliser cette fonction pour effectuer la conversion.

SYSTEMA / D10 / 4433306


++++++ +++++ +++++
++++++++ +++++++ +++++++
++++++++++ +++++++++ +++++++++
++++ ++++ ++++ ++++++++ ++++
+ +++
+-----------------------------------------------------------------------------+
: Confirmation de la conversion des produits :
: :
: Cette fonction permet de convertir les produits SOPRA_SYSTEMES :
: à partir d'une table de conversion de la forme SYSCVTOxxx. :
: Exemple: FFI = conversion du Français --> Français international. :
: :
: Table de conversion SYSCVTOxxx : FFI code xxx :
: :
: F3=Exit :
: :
+-----------------------------------------------------------------------------+
2 Paramétrage des produits installés (après restauration)
3 Conversion des accents
4 Liste des produits installés
Votre Choix: 3

F3=Exit F13=Travaux soumis F21=Entrée commandes

Page 17
V. UTILISATION DES PRODUITS

Pour utiliser les produits, (installation et paramétrage terminés), il faut se connecter sous le
profil SYSSOPRA (mot de passe : SYSSOPRA).

Page 18
VI. CONSULTATION DES PRODUITS INSTALLES

Pour connaître la liste des produits installés, vous devez appeler l'option 4 du menu
SYSINSTAL.

INST060E / SYSTEMC Liste des Bibliothèques Installées 5/05/96


13:19:09
5=Liste Objets
Opt_Produits_____Bibliothèques__No_version____Libellé_________________________
_ SYSBAO SYSBAO V.03.01.009 BOITE A OUTILS
_ SYSAUTO SYSAUTO V.03.01.015 AUTOMATE EXPLOITATION
_ SYSMDM SYSMDM V.03.01.005 GESTION DES MESSAGES
_ SYSOTEK SYSOTEK V.02.01.009 GESTION DES SAUVEGARDES
_ SYSAVE SYSAVE V.03.01.002 GESTION MODE RESTREINT
_ SYSREZO SYSREZO V.01.01.007 GESTION TRANSFERTS
_ SYSFOCAL SYSREZO V.01.01.007 CONSOLE FEDERATRICE
_ SYSVIAL SYSVIAL V.03.01.000 GESTION DES MENUS
_ SYSETA SYSETA V.03.01.000 GESTION DES SPOOLS

______________________________________________________________________________

F3=Exit

Cet écran vous permet de visualiser à tout instant les produits installés sur votre machine et
la version en cours de ces produits, (version, release, ptf).

A partir de cet écran, vous pouvez connaître le contenu de chaque bibliothèque et connaître
également le numéro de version de chaque produit et chaque objet dans chaque produit.

Page 19
VII. INSTALLATION DU MULTI-LANGUES

La langue par défaut des produits est la langue française, et dans chaque produit il existe un
fichier de sauvegarde qui contient les fichiers messages en version anglaise et selon les
pays une version allemande, italienne, et espagnole.
Pour installer une version autre que française, il suffit d’indiquer dans quelle bibliothèque
vous voulez avoir la version langue. Cette bibliothèque devra être placée en amont des
bibliothèques SOPRA. L’idéal serait de la placer dans la liste des bibliothèques systèmes à
la connexion de l’utilisateur via la commande :
CHGSYSLIBL LIB(BibAnglaise) OPTION(*ADD)

Pour l’installation, choisir l’option 5 du menu SYSINSTAL

SYSTEMH Paramétrage du Multi-langues 7/07/98


10:33:35

Langue Libellé Bibliothèque


D Deutch ----------
E English SYSENGLISH
I Italian ----------
S Spanish ----------

F3=Exit F10=Génération bilbliothèque multi-langues

Devant le code langue indiquer la bibliothèque langue.


Appuyer sur F10 pour générer la bibliothèque langue

Page 20
Page 21
Introduction

This manual is delivered at the same time as the product’s magnetic support media. It helps
the customer

It is highly recommended to follow the steps described in this guide.

Page 22
VIII. LOADING THE INSTALLATION PROCEDURE

Under the QSECOFR profile or an equivalent profile (*SECADM) :

Run the LODRUN command specifying the name of the unit on which you have mounted the
product backup support (Function key F4).

When this procedure is completed, the system displays a menu.


This menu allows you access to the following functions:

You can access this menu later, by calling the command SYSINSTAL, after adding the
SYSINSTAL library to the libraries list (ADDLIBLE).

SYSTEMC / C10 / 4424608


++++++ +++++ +++++
++++++++ +++++++ +++++++
++++++++++ +++++++++ +++++++++
++++ ++++ ++++ ++++ ++++ ++++
+ +++
+ ++++ + + ++ +++ +
+ + ++++ + ++ +++
+ + + +
+ ++ + + ++ +++ ++
++ ++++++++++ ++ + + ++ +++
++ ++ +++ +++ +++
++++++++++++++++++++ +++++++ +++++++
+++++ +++++ +++++

SOPRA SYSTEMES wants you to select


the products you wish to install.

1 Installation of the products


2 Set-up installed products (after restoration)
3.Accent conversion
4 Display installed products
5 Multi-language configuration
Your choice: _

F3=Exit F13=Submitted jobs F21=Command entry

When you access this screen place the MSGQ SYSINSTAL/SYSINSTAL in break.

Page 23
IX. CHOICE OF THE PRODUCTS TO INSTALL

To install one or several products, you select them with option 1 of the SYSINSTAL menu.

INST010E / SYSTEMC Choice of products to install 21/07/95


13:18:19
1=Choice

Opt____Product_________Description___________________Info___________________
1 SYSBAO TOOL BOX
1 SYSAUTO OPERATIONS AUTOMATION
1 SYSMDM MESSAGES MONITOR
1 SYSOTEK BACKUP MANAGEMENT
1 SYSAVE RESTRICTED STATE MANAGEMENT
1 SYSREZO TRANSFERS AND NETWORK MNGT
1 SYSFOCAL CENTRAL CONSOLE
_ SYSVIAL MENUS MANAGEMENT
_ SYSGET CHANGE MANAGEMENT
_ SYSETA SPOOL MANAGEMENT
_ SYSBKUP SYSTEM MIRRORING
_ SYSEDIT SPOOL MANAGEMENT
_ SYSALPHA PAGER AND SUPERVISION
_ SYSCOMX MIDDLEWARE
_

_____________________________________________________________________________

F3=Exit

This screen allows you to select the products you want to install on your AS400. You
choose therefore the products to install, i.e. those not present on your AS400.

SYSBAO and SYSFOCAL are systematically delivered with any SYSTEME400 product.
The consequence of this is:

- If you already have one of our products, SYSBAO and SYSFOCAL are installed on
your unit and it is not necessary to restore them again (in any case, it is not possible to
reinstall it under the same name)

- If you do not have any SOPRA products, you must select these two products at the
same time as you select the products to install

Page 24
After selecting the products, you have to give the name of the media unit to use for
restoration.

INST010E Choice of libraries to install the Products 21/07/95


13:18:34
Name of the unit to use ....... TAP01_____

F3=Exit F12=Previous

For each product, the system gives you the name of the libraries for restoration

INST010E Choice of libraries to install the Products 26/08/97


13:18:34
Name of the unit to use ....... TAP01

Products_to_install__________________Name_of_the_installation libraries______
SYSBAO TOOL BOX -----------> SYSBAO
SYSAUTO OPERATIONS AUTOMATION -----------> SYSAUTO
SYSMDM MESSAGE MONITOR - ----------> SYSMDM
SYSOTEK BACKUP MANAGEMENT -----------> SYSOTEK
SYSAVE RESTRICTED STATE MANAGEMENT ----------> SYSAVE
SYSGET CHANGE MANAGEMENT -----------> SYSGET
SYSREZO TRANSFERS AND NETWORK MNGT -----------> SYSREZO
SYSFOCAL CENTRAL CONSOLE -----------> SYSREZO

_____________________________________________________________________________

F3=Exit F12=Previous

If you validate this screen (ENTER KEY), the system submits a job (BATCH) for the
restoration of the products on your system. ( job name: RST-LIB).

You have to wait for the end of this job before continuing with the following functions (set-
up...).

A message is sent to the MSGQ SYSINTAL/SYSINSTAL at the end of the restore.

Note :
Depending on the number of products you install and your AS/400 load, the duration of the
restoration can take from between half to one hour.

Page 25
X. SET-UP THE INSTALLED PRODUCTS

To access to the set-up screen you have to use the option 2 of the SYSINSTAL menu

You can ask for a default set-up or a customised set-up.

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of the installed products 21/07/95 :
: :
: :
: :
: :
: 1 - Default set-up. :
: :
: 2 - Customised set-up :
: :
: Your Choice: 2 :
: F3=Exit :
: :
+------------------------------------------------------------+
SOPRA SYSTEMES wants you to select
the products you wish to install.

1 Installation of the products


2 Set-up of installed products (after restoration)
3 Accent conversion
4 Display of installed products
Your Choice: 2
F3=Exit

It is better to run a customised set-up. Otherwise, if asked by the hot line you have to run
the default set-up.

Page 26
X.1. CUSTOMISED SET-UP - GENERAL PARAMETERS

To access to the set-up screen, you have to use the option 2 of the SYSINSTAL menu.

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of the installed products 26/08/96 :
: +------------------------------------------------------------+
: : SYSTEMC General Parameters 26/08/96 :
: : :
: : :
: : Date Format Product........ : DMY DMY, DYM, YMD :
: : Date delimiter. ........... : / :
: : Hour delimiter ........... : : :
: : Protocol for SYSREZO .... : 1 0=SNA, 1=TCP/IP :
: : MSGQ profile library : QGPLTEMP :
: : :
: : :
+ : F3=Exit F12=Previous :
: :
+------------------------------------------------------------+

1 Installation of the products


2 Set-up of the installed products (after restoration)

4 Display of the installed products


Your Choice: 2
F3=Exit

Note :
In order to enable you to modify these parameters, this option is available anytime;

The first screen allows you to define the common rules for all products.

- Date Format Product:


Our products are compatible with all the date formats (DMY, MDY, YMD). It is possible to
choose another format for our products, without modifying the system date format
(QDATFMT).

- Date delimiter:
In the same way as the date format, you can choose a date delimiter for the display of dates
in SYSTEME400 products (without modifying the system value QDATFMT).

- Hour delimiter:
You can change the hour delimiter for SYSTEME400 products.

Page 27
- Protocol for SYSREZO:
If the TCP/IP version of SYSREZO has been installed on your system the type of protocol is
accessible, otherwise access is locked. Enter a 0 for SNA distribution or a 1 for distribution
by TCP/IP.

- MSGQ Profile library:


When you use one of our products, a MSGQ is created temporarily in a library. You can
enter the name of this library.

X.2. CUSTOMISED SET-UP - PRINTER FILE SIZE (PRTF)

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of installed products 21/07/95 :
: +------------------------------------------------------------+
: : SYSTEMC General Parameters 21/07/95 :
: : +------------------------------------------------------------+
: : : SYSTEMC PRINTER FILE SIZE 21/07/95 :
: : : :
: : : :
: : : Lines per page ............ : 066 Number :
: : : No Line end of page ....... : 064 Number :
: : : Printout Quality ....... : *DRAFT *STD, *DRAFT,... :
: : : :
: : : :
+ : : :
: : :
+ : F3=Exit F12=Previous :
: :
+------------------------------------------------------------+
2 Set-up of the installed products (after restoration)
3 Accent conversion
4 Display installed products
Your choice: 2
F3=Exit

Depending on the paper size you use, you can change the page size (number of lines) and
the number of the end of page line. This will be done for all the printer output for the installed
products
(Default values : number of lines = 51 line n° = 45)

Press ENTER to validate and to continue.

Page 28
X.3. CUSTOMISED SET-UP - LIBRARY BEFORE QSYS

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of installed products 21/07/95 :
: +------------------------------------------------------------+
: : SYSTEMC General Parameters 21/07/95 :
: : +------------------------------------------------------------+
: : : SYSTEMC Printer file size 21/07/95 :
: : : +------------------------------------------------------------+
: : : : SYSTEMC Library before QSYS 21/07/95 :
: : : : :
: : : : Including : :
: : : : Commands SAV*, RST* of SYSOTEK... : 0 0=No , 1=Yes :
: : : : Command SBMJOB of SYSAUTO........ : 0 0=No , 1=Yes :
: : : : :
+ : : : Name of the library ....... : *NONE____ *NONE, Name :
: : : Creation of the library ... : 0 0=NO , 1=Yes :
+ : : :
: : F10=Modification of SYSLIBL :
+ : F3=Exit F12=Previous :
: : tion)
+------------------------------------------------------------+
4 Display of installed products
Your Choice: 2
F3=Exit

This screen allows you:

Þ If you install SYSAUTO:


If you want to put all SBMJOB commands in only one library. Specify this library name (in
case of batch user jobs interception).

Þ If you install SYSOTEK:


If you want to put all SAV* et RST* commands in only one library. Specify this library name.

In this case, you give the name of the library that you will place before QSYS. This library
can be an existing library of your system. If not, you can ask for the creation of a new library
then use the function key F10 to place this library before QSYS.

Page 29
X.4. CUSTOMISED SET-UP - ADDITION OF A LIBRARY to SYSTEME400

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of installed products 26/08/97 :
: +------------------------------------------------------------+
: : SYSTEMC General Parameters 26/08/97 :
: : +------------------------------------------------------------+
: : : SYSTEMC Printer File size 26/08/97 :
: : : +------------------------------------------------------------+
: : : : SYSTEMC Library before QSYS 26/08/97 :
: : : : +------------------------------------------------------------+
: : : : : SYSTEMC Add a library to SYSTEME400 26/08/97 :
: : : : : :
: : : : : You can add 3 libraries :
: : : : : :
+ : : : : Library............ : PRODTOOLS_ Name, Blank :
: : : : Library............ : __________ Name, Blank :
+ : : : Library............ : __________ Name, Blank :
: : : :
+ : : :
: : : on)
+ : F3=Exit F12=Previous :
: :
+------------------------------------------------------------+
F3=Exit F13=Submit jobs F21=Command line

It is possible to add three libraries to our job descriptions.


These libraries will be on line for all batch jobs submitted by our products and when you
work under the SYSSOPRA user profile

These three libraries must exist.

Page 30
X.5. CUSTOMISED SET-UP - profile to access to the products

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up installed products 26/08/97 :
: +------------------------------------------------------------+
: : SYSTEMC General Parameters 26/08/97 :
: : +------------------------------------------------------------+
: : : SYSTEMC Printer File size 26/08/97 :
: : : +------------------------------------------------------------+
: : : : SYSTEMC Library before QSYS 26/08/97 :
: : : : +------------------------------------------------------------+
: : : : : SYSTEMC Add a Library to SYSTEME400 26/08/97 :
: : : : : +------------------------------------------------------------+
: : : : : : SYSTEMC Profile / access to the products 22/12/95:
: : : : : : :
: : : : : : :
: : : : : : User Profile............... : SYSSOPRA :
+ : : : : : Jobd of the profile........ : SYSBAO :
: : : : : Library.. ............... : SYSBAO :
+ : : : : :
: : : : :
+ : : : :
: : : : on)
+ : : F3=Exit F12=Previous :
+ : :
+------------------------------------------------------------+
F3=Exit

The default value for the profile is SYSSOPRA .


If this profile doesn't exist, it will be created with the default values:

INLPGM : VIALINIC
SPCAUT : *ALLOBJ *SAVSYS
PTYLMT : 1
JOBD : SYSBAO/SYSBAO.
ATNPGM : QUSCMDLN

- Jobd & library :


Proposed values :
JOBD = SYSBAO.
Library : SYSBAO.
If you want to use another Jobd, you will be enter all the parameters after the installation.

General parameters now described, you must now continue with the parameters for each
installed product.

Page 31
X.6. CUSTOMISED SET-UP - SYSBAO

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of installed products 21/07/95 :
+----------------------------------------------------------+ ----+
: System Initialisation / Tool Box : 3 :
: S Y S B A O : ------+
: : /95 :
: Logical local System name............... : SYSTEMC___ : --------+
: SNADS Address........................... : SYSTEMC_ : 07/95 :
: Physical System name (SYSNAME).......... : SYSTEMC : ----------+
: : 1/07/95 :
+----------------------------------------------------------+ -----------------+
: : : Checking SYSBAO objects... :
: : : :
+ : +-----------------------------------------------------------------------+
: : : : Library................. : SYSBAO :
+ : : : :
: : : :
+ : : :
: : : on)
+ : F3=Exit F12=Previous :
: :
+------------------------------------------------------------+
F3=Exit F13=Submitted jobs F21=Command line

- Logical Local System name :


The default value SYSNAME is displayed.

- SNADS Address:
Indicate the name that you use in SNADS.

- Physical System Name (SYSNAME) :


You cannot modify this field. It is displayed for information only.

Page 32
Another screen allows you to specify if you want to display the system name and the menu
in the frame of the menus displayed by SYSBAO:

SYSTEMA / D10 / 4433306


+------------------------------------------------------------+
: SYSTEMA Installed product set-up 3/05/96 :
: +------------------------------------------------------------+
: : SYSTEMA General parameters 3/05/96 :
+-----------------------------------------------------------------------------+
: Update an installed product :
: :
: S Y S B A O :
: :
: :
: Display the system name in the menus . 1 1=Yes, 2=No :
: :
: F3=Exit :
: :
+-----------------------------------------------------------------------------+
+ : : : : library ............ : SYSBAO :
+ : : : : on)
: : : :
+ : : F3=Exit F12=Previous :
: : :
+ +----------------------------------------------------------+
F3=Exit F13=Submitted jobs F21=Command line

Page 33
X.7. CUSTOMISED SET-UP - SYSREZO

This screen appears only if you indicate that you are using SYSREZO.

SYSTEMC / C10 / 4424608


+------------------------------------------------------------+
: SYSTEMC Set-up of installed products 21/07/95 :
+----------------------------------------------------------+ ----+
: System Initialisation / Tool Box : 3 :
+-----------------------------------------------------------------------------+
: -------- Update an installed product ------- :
: :
: S Y S R E Z O :
: :
: :
: Is this system FOCAL ? . . . . . . . 1 0=No , 1=Yes :
: :
: :
: F3=Exit :
: :
+-----------------------------------------------------------------------------+
: : : :
+ : : :
: : : on)
+ : F3=Exit F12=Previous :
: :
+------------------------------------------------------------+
F3=Exit

- Is this system focal:


This is where to indicate if you are installing on a remote site or the on focal site.

Page 34
XI. ACCENT CONVERSION

This function allows you to convert the SOPRA Systèmes products according to a
conversion table.

The default for these products is in fact a FRENCH character set!

If your AS/400 uses the FRENCH INTERNATIONAL character set, you will encounter
display problems with accents or some other characters, (Swiss or Belgian customers for
example).

You could therefore use this function to carry out the conversion.

SYSTEMA / D10 / 4433306


++++++ +++++ +++++
++++++++ +++++++ +++++++
++++++++++ +++++++++ +++++++++
++++ ++++ ++++ ++++++++ ++++
+ +++
+-----------------------------------------------------------------------------+
: Confirm the conversion of the products :
: :
: This function allows you to convert the SOPRA.SYSTEMES products :
: from a conversion table in SYSCVT0xxx format. :
: Example: FFI = conversion of French --> French international :
: :
: Conversion table SYSCVTOxxx : FFI code xxx :
: :
: F3=Exit :
: :
+-----------------------------------------------------------------------------+
2 Set-up installed products (after restore)
3 Accent conversion
4 List of installed products
Your choice: 3

F3=Exit F13=Submitted jobs F21=Command entry

Page 35
XII. USE OF THE PRODUCTS

To use the products, (installation and set-ups completed), you have to sign on under the
SYSSOPRA profile (Password : SYSSOPRA).

Page 36
XIII. DISPLAY INSTALLED PRODUCTS

To view the list of installed products, you have to call the option 4 of the SYSINSTAL menu.

INST060E / SYSTEMC List of the installed libraries 21/07/95


13:19:09
5=Object List

Opt_Products_____Libraries______Version_No____Description________________________
_ SYSBAO SYSBAO V.03.01.009 TOOL BOX
_ SYSAUTO SYSAUTO V.03.01.015 OPERATIONS SCHEDULER
_ SYSMDM SYSMDM V.03.01.005 MESSAGE MONITOR
_ SYSOTEK SYSOTEK V.02.01.009 BACKUP MANAGEMENT
_ SYSAVE SYSAVE V.03.01.002 RESTRICTED STATE MANAGEMENT
_ SYSREZO SYSREZO V.01.01.007 TRANSFER AND NETWORK MNGT
_ SYSFOCAL SYSREZO V.01.01.007 FOCAL CONSOLE
_ SYSVIAL SYSVIAL V.03.01.000 MENUS MANAGEMENT
_ SYSGET SYSGET V.03.01.000 CHANGE MANAGEMENT

______________________________________________________________________________

F3=Exit

This screen allows you to see the products installed on your AS400 and the current version
number
(version, release, ptf).

This screen enables you to see the contents of each library and to know the version number
of each object in these libraries.

Page 37
XIV. MULTI-LANGUAGE INSTALLATION

The default language for our products is, unsurprisingly, French, however each product has
a save file which contains the message files in English and then according to the country a
German, Italian or Spanish.
To install the appropriate version for your country, you simply need to enter the library
containing the required version. This library should be placed infront of the
SOPRA.SYSTEMES libraries. Ideally this would be in the system library list for the
connection profile of the user via the command:
CHGSYSLIBL LIB(English library) OPTION(*ADD)

To install, choose option 5 from the SYSINSTAL menu

SYSTEMH Multi-language Configuration 7/07/98


10:33:35

Language Label Library


D Deutsch ----------
E English SYSENGLISH
I Italian ----------
S Spanish ----------

F3=Exit F10=Generate multi-language library

Enter the language code in front of the language library.


Press F10 to generate the language library.

Page 38

Das könnte Ihnen auch gefallen