Beruflich Dokumente
Kultur Dokumente
Q-No: Marks
1. Write down the purpose of VHF RT P-863 and 10 technical data. 10
Ans: Purpose: VHF RT P-863 used in MI-17 hel for two ways short distance
voice communication. Such as air to ground, air to air and ground to ground within
the frequency range 100-149.975 MHz (VHF Band).
Tech data:
1. Frequency range- 100-149.975Mhz (VHF Band)
2. No of channel- 9200
3. Channel spacing- 25 kHz
4. Pre-set channel 20
5. Power supply 27vdc±10%
6. Receiver sensitivity - 3 μV
7. Power output- 10 watt (VHF Band)
8. Operating altitude- 20km
9. Modulation- AM/FM
10. Warming up time- 5mints
2. a. Write down the name of sub units & their location of VHF RT P-863 05
Ans: Name of sub units Location
a) Receiver driver Located at the radio bay
b) Transmitter unit Located at the radio bay
c) Shock mount Located at the radio bay
d) Antenna matching unit Located at the radio bay
e) Control panel Located central pedestal
f) Memory unit Located front electric panel
g) Antenna Located upper side of the tail boom
Safety Precautions.
1
CONFIDENTIAL
CONFIDENTIAL
Tech data:
1. Frequency range- 2—17.9999 Mhz
2. No of channel- 160,000
3. Channel spacing- 100Hz
4. Operating rang 400km
5. Power supply 27vdc±10%
6. Receiver sensitivity - 3μV (SSB)
7. Power output- 100watt
8. Operating altitude- 9.1km
9. Modulation- AM/SSB
10. Warming up time- 5-15mints
4. a. Write down the purpose of Radio compass (APK-9) and give five tech
data. 05
Ans: Purpose: Radio compass APK-9 used in MI-17 Hel to guide the pilot by giving
aural and bearing information with the reference to the ground station and radio beacon.
Tech data:
1. Frequency range- 150—1300kHz
2 Power supply 27vdc±10% and 115vac 400 Hz
3. Receiver sensitivity - 10μv to 12μv
4. Bearing error ±3 0
5. Operating range 160-180km (At flight altitude 1,000 m)
2
CONFIDENTIAL
CONFIDENTIAL
5. a. Write down the name of sub units & their location of MF ADF APK-9. 05
Ans: Name of sub unit Location
a) Receiver unit. Behind the co-pilot seat
b) Shock mount Behind the co-pilot seat
c) Power supply unit. Behind the co-pilot seat
d) Control unit Right side of the electric panel
e) Antenna matching Under cargo-compartment
f) Loop & sense antenna Under cargo-compartment
g) Curse indicator Both front instrument panels
Installation Process:
Shock-Mount APK-УД:
6. Write down the purpose of Radio Altimeter (A-037) and give the five
3
CONFIDENTIAL
CONFIDENTIAL
tech data. 10
Ans: Purpose: Radio altimeter A-037 is used in MI-17 hel for measure the present
altitude of the object above any surface.
Tech data:
1. Frequency range- 4200-440 Mhz
2. Power supply 27vdc±10% and 115vac 400 Hz
3. Receiver sensitivity - 87 dB
4. Altitude measuring range 0-750 m
5. Duration of audio signal 3-9 sec
6. Transmitter power output 80mW
7. Warm-up time 2 min (max)
8. Modulation FM
9. Transmission mode CW
10. Altitude accuracy ±0.1 m (Above 20 m)
7. a. Write down the purpose of voice recorder MC-61 and give the
five tech data. 05
Ans: Purpose: The voice recorder is used to record the audio information and
commands received through RT and intercommunication system.
Tech data:
1. Power supply 27vdc±10%
2. Power consumption 20w
3. Continuous recording time— 5.5hrs
4. Dynamic range 34dB
5. Operating mode Auto & continuous
Installation Process:
4
CONFIDENTIAL
CONFIDENTIAL
8. a. Write down the purpose, sub unit and location of ICS CПY-7 . 05
INF-ALMAZ UPM:
Repair/replace all damages harness skin cover
If harness cover condition is good clean with benzene
Clean all connectors with Alcohol
Remove svc tag from Eqpt (if aval)
Clean screw holes & earth bonding
Shock absorber base plate fix with the unit by 04 x screws
INF unit with shock mount fitted with hel frame by fixing 02 x screws
Fitted 02 x connectors(X1 & X2) with unit (X3 blank)
Fitted earth bonding, locked & secured with locking wire
Make a entry in the Radio Eqpt installation sheet with sign & date
9. a. Write down the purpose of INF PИ-65 and give the five tech data. 05
Ans: Purpose: The of Information reporter PИ-65 is used in hel to circulate the voice
message or aural warning to the pilot and ground control station during emergency
condition in-flight.
5
CONFIDENTIAL
CONFIDENTIAL
10. Write down the 10 tech data of VHF R/T ORLAN-85 ST. 10
6
CONFIDENTIAL
CONFIDENTIAL
.
13. a. What is Navigation? 02
Navigation is the process of traveling from one place to another where you are in
relation to your desire course.
7
CONFIDENTIAL
CONFIDENTIAL
NAV Eqpts.
a. MF ADF APK-9
b. VHF ADF APK-15
c. Radio Altimeter A-037
d. VOR KN-53
e. DME KN-63/62A
f. System 7 DF
g. GPS
h Weather Radar
Installation Process:
REMOVAL. DESCRIPTION
a. Amplifier unit:
→ At first remove the locking wire by using cutter
→Unlock and disconnect the plug connector from amplifier unit with the canon plier
→Release screw and dethatch the strip bonding from the frame
→Release the attachment screws and remove the amplifier unit
→Finally fit the blanks into connector to protect them
8
CONFIDENTIAL
CONFIDENTIAL
→Release 04 panel attaching screws with interphone control box in the pilot cockpit by
using common screw driver
→ Move the panel aside, open the front LH electric panel and unlock the coupling with
common screw driver
→Remove the locking wire by using cutter
→Disconnect the plug connectors and detach the strip bonding them remove the panel
with control box by using cannon pliers
→Release screws and removed interphone control box from the panel by using common
screw driver
→Close connectors with blanks to protect them
Note: Repeat the steps above to remove the co pilot side interphone control box.
→ Release 04 screws attaching the additional interphone control box and holding it
→Release nuts and disconnect electric wires them back the screws on the nuts.
Ans: The purpose of the colored weather radar RDR-2000 is to detect hydro-weather
formations and hazard for flight. It is also used for ground scan during navigation
orientation. Weather radar provides air space azimuth sector scanning & vertical sector
scanning.
9
CONFIDENTIAL
CONFIDENTIAL
16. Write down the tech data of weather radar RDR- 2000. 10
Ans:
18. a. Write down the names of radio equipments used in MI-17 series hel. 10
Ans:
10
CONFIDENTIAL
CONFIDENTIAL
09 Wx Radar : RDR-2000
10 ATC Transponder : KT-76C
11 PA System : CГҮ-15
12 Digital Audio/Video System : IVA-310R
13 ELT : Artex- 200HM,P-855A, SARBE-5,Artex C-406NHM,P-3000
14 VOR/ILS : KN-53
15 DME : KN-63,KN-62A
16. GPS : KLX-135A, GARMIN-165TSO,155XLX, GNS-
530W,GTN-750,AERA500,MAP-96
Installation Process:
GPS ANTENNA:
21. b. Write down the installation process of loop antenna unit of APK-15M. 05
Installation Process:
12
CONFIDENTIAL
CONFIDENTIAL
Installation Process:
ART-2000 UNIT:
24. Write down purpose, sub unit and 05 tech data of HF RT YADRO-1A. 10
Purpose:
13
CONFIDENTIAL
CONFIDENTIAL
Composition
a. Receiver driver
b. Power Amp
c. Shock –mount
d. Antenna matching unit
e. Fan power unit
f. Control panel
g. Antenna
h. Cct breaker
Technical Data
25. Write down the purpose of VOR KN-53, composition & its 05 technical data. 10
Purpose:
Composition:
a. Main set
b. Indicator
c. Antenna (Navigation & glide slope)
d. Cct breaker
14
CONFIDENTIAL
CONFIDENTIAL
26. Write down the purpose of DME KN-63, composition & its 05 technical data. 10
Purpose
Composition:
a. Main set
b. Indicator
c. Antenna
d. Cct breaker
27. Write down the 10 technical data of Emergency Radio P-855 A1. 10
Ans:
TECHNICAL DATA FOR EMERGENCY VHF R/T
1. Tx Operating freq. fixed: 121.5 MHz and 243 MHz
2. Power supply: 9.4V DC
3. Type of modulation: AM
4. Rxr sensitivity: Not worse 10µV
5. TXR power output: 100 mW
6. Operating temp: -50ºc to +60ºc
7. Set can operate: For one hour inside the sea water on depth no more than one
meter.
8. Operation time: Beacon mode: 24 hrs
RT mode: 60 hrs
9. Operating range: Beacon mode: 60 NM
RT mode: 10 NM at 1000 ft
10. Humidity: 90±3%
15
CONFIDENTIAL
CONFIDENTIAL
28. Write down the purpose & 10 technical data of VHF RT FSG-71M. 10
Ans:purpose:
It is used to establish to communication air to air, air to ground & ground to ground
communication.
29. Write down the Purpose & 10 technical data of VHF RT FSG-90H1. 10
Ans: purpose: It is used to establish to communication air to air, air to ground & ground
to ground communication.
16
CONFIDENTIAL
CONFIDENTIAL
30. Write down the sub unit & 05 technical data of VHF ADF APK-YД. 10
Ans: Composition.
(1) Receiver unit
(2) Power amplifier
(3) Remote Control Panel
(4) Loop Antenna Unit
(5) Sense Antenna
(6) Mechanical adaptor
(7) Junction box
(8) Built in test generator
31. Write down the frequency band spectrum with wave length. 10
32. Write down the purpose of ADF APK-15M , composition & 05 technical data. 10
Ans:
a. Purpose. It is used for the Helicopter piloting in response to signal fed from the
homing beacons and broadcasting radio stations.
b. Composition.
(1) Receiver unit
(2) External Test Connector
(3) Remote Control Panel
(4) Loop Antenna Unit
(5) Sense Antenna
(6) Mechanical adaptor
(7)Loop cable equivalent
(8) Cct Breaker
c. Tech Data.
(1) Freq Range: 150-1799.5 KHz
(2) Power Supply: 27VDC, 36VAC 400Hz
(3) Channel: 3300
(4) Freq Interval between Channel: 500 Hz
(5) retuning time: 4 sec
33. Write down the purpose of Prima-KV , composition & its 05 technical data. 10
Ans:
a. Purpose. It is used to establish communication between air to air and air to ground. It is
also used long-range communication.
b. Composition.
(1) Transceiver unit
(2) Shock-mount
(3) Antenna matching unit
(4) Control Panel
(5) Antenna
(6) Cct Breaker
c. Tech Data.
(1) Freq Range: 2.000 -29.9999 МHz
(2) Frequency spacing: 100 Hz
(3) RXR Sensitivity: 1 µV (SSB)
(4) Power Supply: 24 - 29.4V DC
(5) Power consumption: 390W (Tx), 30 W (Rx)
18
CONFIDENTIAL
CONFIDENTIAL
34. Write down the purpose of GNS-530W , composition & its 05 technical data. 10
Ans:
Purpose
Composition
a. Main Set
b. Antenna
c. Cct beaker
Technical Data
Installation Process:
19
CONFIDENTIAL
CONFIDENTIAL
Installation Process:
TRANSCEIVER UNIT OF ORLAN-85 ST:
Clean all connectors with Alcohol
Remove svc tag from Eqpt (if aval)
Fitted shock absorber with hel base by fixing 04 x screws
ORLAN casing fitted with shock absorber by attaching 04 x screws
Connect all the connectors with shock mount
Put on TX & RX both unit onto shock mount by fixing the mounting screws
Fitted earth bonding with both unit properly
Locked all the coupling nuts & fastener properly
Make a entry in the Radio Eqpt installation sheet with sign & date
37. Write down the purpose of DME KN-63, composition & its 05 technical data. 10
Purpose
Composition:
d. Main set
e. Indicator
f. Antenna
d. Cct breaker
Technical Data
20
CONFIDENTIAL
CONFIDENTIAL
38. Write down the purpose of ATC Transponder KT-76C, composition & its 05
technical data.
10
Ans:
Purpose
ATC Transponder is intended for the operation with VOR, ATC system and
automatically transmission to VOR ground stations (after its interrogation)
information about:
a. The location of the helicopter
b. Tactical number of the helicopter
c. Flight altitude of the helicopter
d. Emergency situation onboard.
Composition:
a. Main set
b. Antenna
d. Cct breaker
Technical Data
39. Write down the purpose of Voice Recorder, composition & its 05 technical
data. 10
Purpose
1. Cockpit Voice Recorder 503Б is used to record all audio from R/T
and intercom system. It is also called black box.
Composition:
21
CONFIDENTIAL
CONFIDENTIAL
Technical Data
40. Write down the purpose of GPS GARMIN-165 TSO, composition & its 05
technical data 10
Ans:
Purpose
1. GPS stands for global positioning system, which based on satellite system.GPS is
power full navigational eqpt which provides in 3 dimensions i.elatitude, longitude& altitude.
It can direct access to world wide data on airport VOR NDB intersection& user way point.
The purpose of GPS is to calculate any position on Earth surface in three dimensions.
Like—Latitude, Longitude & Altitude.
Composition:
a. Main set
b. Antenna
Technical Data
22
CONFIDENTIAL
CONFIDENTIAL
41. Write down the purpose of weather radar, composition & its 05 technical data. 10
Ans:
Purpose
Composition:
a. ART Unit
b. CM Unit
c. Indicator
d. Antenna
e. Cct Breaker
Technical Data
42. Write down the installation process of fan power unit & antenna matching unit
of HF RT. 10
Installation Process:
23
CONFIDENTIAL
CONFIDENTIAL
c) Antenna Aшb-75:
→Release antenna to tail boom skin fastening screws
→Cut the locking wire and disconnect HF connectors
→Remove the antenna
→Cover connectors with blanks to protect them
24
CONFIDENTIAL
CONFIDENTIAL
→
Unlock and disconnect plug connector from fan power unit
→Release the strip bonding attachment screw and remove the strip bonding
→Release the unit to rack attachment screw and remove the fan power unit
D) Control Panel
25
CONFIDENTIAL
CONFIDENTIAL
26
CONFIDENTIAL
CONFIDENTIAL
e) Junction Box
→ Disconnect HF connector
→ Release attachment screws
→ Remove junction Box
27
CONFIDENTIAL
CONFIDENTIAL
h) Control Panel
C) TX AND RX ANTENNA:
=>Remove antenna fastening screws from lower portion of tail boom
=>Holding antenna by hand ,pull out the cable free end
=>Unlock and disconnect HF connector from each antenna
=>Fit blanks on to connectors to protect them
28
CONFIDENTIAL
CONFIDENTIAL
REMOVAL. DESCRIPTION
a. Amplifier unit:
→ At first remove the locking wire by using cutter
→Unlock and disconnect the plug connector from amplifier unit with the canon plier
→Release screw and dethatch the strip bonding from the frame
→Release the attachment screws and remove the amplifier unit
→Finally fit the blanks into connector to protect them
→Release 04 panel attaching screws with interphone control box in the pilot cockpit by
using common screw driver
→ Move the panel aside, open the front LH electric panel and unlock the coupling with
common screw driver
→Remove the locking wire by using cutter
→Disconnect the plug connectors and detach the strip bonding them remove the panel
with control box by using cannon pliers
→Release screws and removed interphone control box from the panel by using common
screw driver
→Close connectors with blanks to protect them
Note: Repeat the steps above to remove the co pilot side interphone control box.
→ Release 04 screws attaching the additional interphone control box and holding it
→Release nuts and disconnect electric wires them back the screws on the nuts.
29
CONFIDENTIAL
CONFIDENTIAL
50. Write down the installation process of Voltage converter KA-039 & Receiver
unit of APK-15M. 10
Installation Process:
30
CONFIDENTIAL
CONFIDENTIAL
31
CONFIDENTIAL