Beruflich Dokumente
Kultur Dokumente
Based on the Equipment Number and DNV Rules, the minimum required anchoring/mooring
equipment number and specifications are also recommended
Formula
EN = Δ2/3 + 2 B H + 0.1 A
Δ = Rule Displacement in MT
B = Rule Breadth in m
H = effective height in m from the summer load waterline to the top of the uppermost deckhouse, measured as follows:
H = a + Σ hi
a = distance in m from the summer load waterline amidships to the upper deck at side (Freeboard)
hii = height in m on the center line of each tier of houses having a breadth greater than B/4.
For the lowest tier, hii shall be measured at center line from the upper deck,
or from a notional deck line where there is local discontinuity in the upper deck
References
1. DNV Rules for Classification of Ships (New building) - Part 3 Chapter 3, Section 3 Anchoring and Mooring Equipment
Table 1: Vessel Inputs
INPUT PARAMETER Symbol Value Units
Displacement (Molded) Δ 3333 MT
Length on Waterline at Summer Loadline LWL 67.9 m
Length Between Perpendilars LBP 66.8 m
Breadth (Molded) B 16 m
Depth (Molded) D 7 m
Summer Loadline Draft d 5.8 m
Fiig 1: Deck House Height Fiig 2:: Bullwarks wiith heiight > 1..5 m
(shaded area to be added)
Profile
Effective
Length (Li), m Area Default
Height (hi), m
=(hi x Li)(m)2
mno
450 to 499 mno 2 1440 412.5 38 34 30 180 277 4 140
Mooring Equipment
Units
MT
m
m
m
m
m
S
Profile
Area Default
=(hi x Li)(m)2
135.9898
7.1876
143.1774
ng lines 1)
(guidance)
ropes
Minimum
breaking
strength
kN
98
108
123
132
147
157
172
186
201
216
230
250
270
284
309
324
324
333
353
378
402
422
451
480
480
490
500
520
554
588
Project Spreadsheets to BS 8110
Client Advisory Group Made by
Location Level -1 Base B1 Single column RMW
PAD FOUNDATION DESIGN to BS 8110: base Checked
Originated from RCC81.xls on CD © 1999 BCA for RCC chg
A. Design Parameters:
Concrete Density = 0.00 Mpa
Concrete Strength = 0.00 Mpa
Steel Yield Strength =
Water Density =
Concrete Cover =
B. BLOCK GEOMETRY
Length = 3.00 m
Breadth = 2.00 m
Depth = 2.00 m
C. DESIGN LOAD:
Max Tension in M cable = 157.00 kN
Equiment Number =
D. DESIGN LOAD:
Date Page
26-Nov-99 113
Revision Job No
- R68