Sie sind auf Seite 1von 6

Fusion of

electronic pressure sensor


and analogue display.
www.ifm.com/gb/pg
Pressure sensors

fluid sensors
and diagnostic
systems

position
sensors
and object
recognition
bus,
identification
and control systems
For hygienic areas
and viscous media

The first fully electronic


contact manometer.

Increase your
process safety.
In the process
industry mechani-
cal contact mano-
meters are often
used because of
their highly visible
display. The elec-
tronic “contact
manometer” of
the series PG com-
bines the high visi-
bility of a mano-
meter display with
the advantages of
an electronic
pressure sensor.
It withstands
vibrations, dynam-
ic load changes,
overpressure or
temperature fluc-
tuations.

Food industry Pharmaceutical industry

Highly visible,
easy to use.
Compared to signal and is
mechanical units, scalable using the
the electronic 2-point calibration
manometer fea- for a certain mea-
tures varied suring range.
options for opti- More functions
mum adaptation are the adjustable
to the application. damping and the
NO or NC function user menu with
The clearly visible scale features an
as well as set and electronic lock
LED ring which has one LED per tick
mark. It shows the adjusted set and reset points can be function. To be on
reset points. As an alternative, it can set precisely via the safe side, the
be set as a trend display. the user menu. The pointer is not visi-
analogue output ble when the unit
provides a current is disconnected.

The LED display indicates the current


measured value. The user can select
between different display units. In
combination with the two touch fields,
the alphanumeric display is also used
for a menu-guided parameter setting
of the unit.
Easy setting and legibility,
high-precision measurement and switching.

3-in-1:
Analogue display, transmit-
ter and switch in one unit –
without using relays or
switching amplifiers.
Highly visible:
Simultaneous analogue and
digital display of measured
values. Rotatable display
scale 1:1
with LED ring for trend or
switch point display.
Precise:
High precision (0.2 %) due
to electronic processing of
measured values. Long-
term stability and excellent
overload protection thanks
to the high-purity ceramic
measuring cell.
Vibration-resistant:
Optimum legibility due to In case of
the electronic pointer “overhead” or
display – a stepper motor “slantingly”
serves as a positioner, no installed units the
scale can be
damping liquid required. aligned horizont-
ally for optimum
Clean: legibility.
Hygienic, flush housing
design with high-quality Electronics replaces
surfaces. Front pane of mechanics.
laminated safety glass.
Long life: Measurement pressure peaks operating princi-
method and evalu- and features excel- ple. It can be
Wear-free, even in case of ation electronics lent overload directly connected
dynamic load changes are based on the protection. The to the inputs of a
thanks to measured values PI type pressure system works with- PLC via the solid-
sensor. The meas- out mechanical state switching
being picked up electron- ured values are components, so it output. There are
ically – reduce your picked up electron- operates with no no mechanical
maintenance. ically via a corro- wear at all. The contacts subject to
sion-resistant and electronic mano- wear as are used
long-term stable meter provides a for mechanical
ceramic measuring number of power- contact manome-
cell. It is resistant ful functions due ters.
to dynamic to its electronic
Selecting your suitable mano-
meter is as simple as that.
The fully electronic of unit. Just select
operating principle the required pres-
of the manometer sure range, the
facilitates the suitable process
selection of the adapter and the
right type requested sealing
concept.

Water / wastewater technology


Flexible
Variable in the sealing.
hygienic process. Using Aseptoflex
Vario you have
The new flush 1 Clamp adapter the free choice
process connection 1-1.5" and 2" between four
Aseptoflex Vario different sealing
provides a variety options:
of adapter options, 2 DIN 11851
for example: DN40 adapter 1.5"

Conventional
3 Welding adapter
sealing
(e.g. teflon tape)

1 Metal on metal

PEEK seal
2

3 EPDM / FKM
O-ring
Technical data of the electronic manometer

Liquids and gases


Application
Type of pressure: relative pressure

Electrical design DC

Connection 3-wire

Process connection G 1 thread Aseptoflex Vario


Measuring range -1… -1… -1… -0.124… -0.05… -0.0124… -1… -0.005…
relative pressure [bar] 25 10 4 2.5 1 0.25 1 0.1
Extended display range [bar] 40 16 6.4 4 1.6 0.4 1.6 0.16
P overload max. [bar] 100 50 30 20 10 10 10 4
Analogue start point [bar] -1.00… -1.00… -1.00… -0.124… -0.05… -0.0124… -1.00… -0.005…
33.76 13.50 5.40 3.370 1.35 0.3376 1.10 0.135
Analogue end point [bar] 5.24… 1.50… 0.00… 0.50… 0.20… 0.05… -0.50… 0.02…
40.00 16.00 6.40 4.00 1.60 0.40 1.60 0.16
Switch point SP1 [bar] -0.96… -0.98… -0.99… -0.12… -0.048… -0.012… -0.998… -0.0048…
40.00 16.00 6.40 4.00 1.60 0.40 1.60 0.16
Order no. PG2793 PG2794 PG2795 PG2796 PG2797 PG2798 PG2799 PG2789

Operating voltage [V] 18...32


Current consumption [mA] < 45
Current rating [mA] 250
Output function NC / NO, analogue output (4…20 mA or 0…10 V)
Programming options hysteresis / window; NO / NC; output logic; current output; damping;
calibration of displayed values; scalable, display unit; 2-point calibration
Precision / deviation
(in % of the span)
turn down 1:1
Deviation of the switch point < ± 0.2 < ± 0.5
Deviation of the characteristics < ± 0.2 < ± 0.5
Linearity < ± 0.15 < ± 0.25
Hysteresis < ± 0.15 < ± 0.2
Repeatability < ± 0.1 < ± 0.1
Long-term stability < ± 0.1 < ± 0.1
Temp. coefficient (TEMPCO) in
the temp. range 0 ... 70 °C
(in % of the span per 10 K)
Greatest TEMPCO of zero < ± 0.05 < ± 0.1
Greatest TEMPCO of the span < ± 0.15 < ± 0.2
Medium temperature [°C] -25...125 (145 max. 1 h)
Materials stainless steel / 316L (1.4435); ceramics (99,9 % AI203); PTFE
(wetted parts)

PG2793 - PG2799 / PG2789 Accessories (selection)


100 57
Description Order no.
1
M12 x1

Adapter Aseptoflex Vario for clamp ISO 2852 1-1.5"


E33201
with EPDM O-ring, FKM or PEEK seal as an option
Adapter Aseptoflex Vario for clamp ISO 2852 1-1.5"
E33701
metal on metal
153

Adapter Aseptoflex Vario for clamp ISO 2852 2"


E33202
with EPDM O-ring, FKM or PEEK seal as an option
Adapter Aseptoflex Vario for clamp ISO 2852 2"
E33702
2 metal on metal
60,5

3
Adapter Aseptoflex Vario for DIN 11851 DN40 (1.5")
E33212
with EPDM O-ring, FKM or PEEK seal as an option
16,8

24
Adapter Aseptoflex Vario for DIN 11851 DN40 (1.5")
G1 E33712
metal on metal
1 = analogue display Welding adapter Aseptoflex Vario E30122
2 = 4-digit alphanumeric display FKM (Viton) seal for Aseptoflex Vario E30123
3 = programming buttons
PEEK seal for Aseptoflex Vario E30124
visit our website:
www.ifm.com/za

Overview ifm main catalogues:

Position sensors Fluid sensors Bus systems


and object recognition and diagnostic systems Bus system AS-Interface
Inductive sensors Level sensors Power supplies
Capacitive sensors Flow sensors Connection technology
Magnetic sensors, Pressure sensors
cylinder sensors Temperature sensors Identification systems
Safety technology Diagnostic systems Multicode reading systems
Valve sensors Evaluation systems, RF-identification systems
Photoelectric sensors power supplies Power supplies
Object recognition Connection technology Connection technology
Encoders
Evaluation systems, Control systems
power supplies Control systems
Connection technology for mobile vehicles
Connection technology

ifm electronic (Pty) Ltd


National Tel: 0861 IFM RSA (436 772)
International Tel: +27 12 450 0370

Branches
Centurion (HO) Durban Klerksdorp & Northern Cape
Rustenburg Richards Bay Steelpoort
Vaal Triangle Port Elizabeth

Sales_ZA@ifm.com
www.ifm.com/za

Das könnte Ihnen auch gefallen