Beruflich Dokumente
Kultur Dokumente
. Which of the following allows Novell workstations to access files and printers hosted
on a Windows NT server ?
Which of the following workstations will be affected when a SINGLE link on a full-
mesh network fails ?
(A) The workstations directly connected to the failed link
(B) The workstations downstream from the failed link
(C) The workstations upstream from the failed link
(D) All the workstations on the network
(E) None of the workstations
• A. 100BaseTX
• B. 10BaseFL
• C. 100BaseUX
• D. 10Base2
Which of the following networking standards specifies a maximum segment length of 100
meters?
• A. 10Base2
• B. 10BaseFL
• C. 10BaseYX
• D. 10BaseT
While troubleshooting a network connectivity problem, you notice that the network card in
your system is operating at 10Mbps in half-duplex mode. At what speed is the network link
operating?
• A. 2.5Mbps
• B. 5Mbps
• C. 10Mbps
• D. 11Mbps
• A. 802.11b
• B. 802.2
• C. 802.5
• D. 802.3
Which of the following IEEE standards has the highest maximum transmissions speeds?
• A. 802.3ae
• B. 802.3xr
• C. 802.3z
• D. 802.3u
You are tasked with specifying a way to connect two buildings across a parking lot. The
distance between the two buildings is 78 meters. An underground wiring duct exists between
the two buildings, although there are concerns about using it because it also houses high-
voltage electrical cables. The budget for the project is very tight, but your manager still wants
you to specify the most suitable solution. Which of the following cable types would you
recommend?
• A. Fiber-optic
• B. UTP
• C. Thin coax
• D. STP
You are instructed by your manager to procure a cable with a Type A connector on one end,
and a Type B connector on the other. What kind of interface are you most likely to be dealing
with?
• A. FireWire
• B. USB
• C. RJ-11
• D. Fiber Optic
Which of the following IEEE standards has the highest maximum transmissions speeds?
• A. 802.3ae
• B. 802.3xr
• C. 802.3z
• D. 802.3u
You have been employed to configure a 10Base2 network. Which of the following
technologies would you use? (Choose two.)
• A. UTP
• B. STP
• C. T-connectors
• D. RJ-11 connectors
• E. RG-58 cable
Which of the following topology types offers the greatest amount of redundancy?
• A. Star
• B. Bus
• C. Ring
• D. Mesh
You have been called in to replace a faulty ST connector. Which of the following media
types are you working with?
• A. RG-58
• B. RG-62
• C. Single mode fiber
• D. SCSI
You are troubleshooting a 10Base2 network and suspect that the maximum cable length has
been exceeded. What is the maximum length of a 10BASE-2 network segment?
• A. 25 meters
• B. 100 meters
• C. 185 meters
• D. 500 meters
• A. 185 meters
• B. 500 meters
• C. 100 meters
• D. 50 meters
You are installing a 100BaseFX network and need to purchase connectors. Which of the
following might you purchase? (Choose two.)
• A. RJ-45
• B. ST
• C. BNC
• D. SC
When designing a network, you have been asked to select a cable that offers the most
resistance to crosstalk. Which of the following are you likely to choose?
• A. Multimode fiber-optic
• B. Shielded twisted pair
• C. UTP
• D. Shielded mesh
• A. RG-58
• B. Category 4 UTP
• C. Category 5 UTP
• D. Multimode fiber
Which of the following connectors is used with fiber-optic cable? (Choose three.)
• A. SC
• B. F-type
• C. MTRJ
• D. LC
You are implementing a new network. From the network specifications, you learn that you
will be using the 1000BaseCX standard. What type of cable will you be using?
• A. Multimode fiber
• B. STP
• C. Single mode fiber
• D. CoreXtended fiber
Which of the following media types is used with the 802.3 1000BaseSX standard?
• A. Coaxial
• B. UTP
• C. Single mode fiber-optic
• D. Multimode fiber-optic
ou are implementing a 100BaseT network. Which logical topology does the network use?
• A. Ring
• B. Star
• C. Mesh
• D. Bus
You are implementing a new network that will use 100BaseT with switches configured for
full duplex. What is the maximum throughput that will be possible between two devices on
the network?
• A. 10Mbps
• B. 20Mbps
• C. 200Mbps
• D. 100Mbps