Beruflich Dokumente
Kultur Dokumente
com
ENGLISH
LCD TV
OWNER’S MANUAL
LCD TV MODELS
19LS4R*
22LS4R*
17LS5R*
20LS5R*
ACCESSORIES
ACCESSORIES
Ensure that the following accessories are included with your TV. If any accessory is missing, please contact
the dealer where you purchased the product.
Owner's
Manual or
Owner’s manual
Cable Management
Power Cord
*Slightly wipe stained spot on the exterior only with the cleans-
ing cloths for the product exterior if there is stain or fingerprint on
surface of the exterior.
Polishing Cloth Do not wipe roughly when removing stain. Please be cautious of
Polish the screen with the cloth that excessive power may cause scratch or discoloration.
This feature is not available
for all models.
1
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
CONTENTS
A C C E S S O R I E S ......................................................1
CONTENTS
2
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
CONTENTS
TIME SETTING
Clock Setup......................................................................57
Auto On/Off Timer Setting .........................................58
Sleep Timer Setting........................................................59
Auto Shut-off Setting ....................................................60
TELETEXT
APPENDIX
Troubleshooting..............................................................64
Maintenance ...................................................................66
Product Specifications ..................................................67
3
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
17LS5R*/ 20LS5R*
PREPARATION
17LS5R*
20LS5R*
Remote Control
Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the set is switched on.
4
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
19LS4R*/ 22LS4R*
PREPARATION
POWER INPUT MENU OK VOLUME PROGRAMME
Button Button Button Button Buttons Buttons
5
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
17LS5R*
PREPARATION
2 3
17LS5R*
RGB(PC/DTV) IN ANTENNA IN
AUDIO
(RGB) IN
VIDEO H/P
S-VIDEO
AV 1 AV IN 2
1 4 5 6 7
3 Antenna Input
Connect over-the-air signals to this jack.
6
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
20LS5R*
PREPARATION
2 3
AC IN
SERVICE ONLY ANTENNA IN
AV 1
VIDEO H/P
S-VIDEO
AV IN 2
1 4 5 6 7
7
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
2 3 4
AUDIO
HDMI/DVI IN RGB (PC/DTV) IN
(RGB/DVI) IN
ANTENNA IN
L AUDIO R
VIDEO S-VIDEO
H/P
AV 1 AV IN 2
Y PB PR L R
VIDEO
AUDIO
COMPONENT IN
1 5 6 7 8 9
1 Power Cord Socket 5 Euro Scart Socket (AV1)
This TV operates on an AC power. The voltage is Connect scart socket input or output from an
indicated on the Specifications page. Never external device to these jacks.
attempt to operate the TV on DC power.
6 Audio/Video Input
2 HDMI/DVI IN Input Connect audio/video output from an external
Connect a HDMI signal to HDMI IN. device to these jacks.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable. 7 Component Input
Connect a component video/audio device to
3 RGB/Audio Input these jacks.
Connect the monitor output from a PC/DTV to
the appropriate input port. 8 S-Video Input
Connect S-Video out from an S-VIDEO device.
4 Antenna Input
Connect over-the-air signals to this jack. 9 Headphone Input
8
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
STAND INSTALLATION
■ Here shown may be somewhat different from your TV.
19/22LS4R* 17/20LS5R*
Carefully place the product screen side down on a cushioned Carefully place the product screen side down on a cushioned
1 surface that will protect product and screen from damage. 1 surface that will protect product and screen from damage.
PREPARATION
2 Hold the h i n g e b o d y and bend it upward.
Hinge Body
Insert the stand body into the product until clicking sound. stand body
3
Stand Body
Cover Base
9
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
DETACHING STAND
■ Here shown may be somewhat different from your TV.
Hold cover base and pull with shake it backward Hold the stand and bend it upward.
3 to separate from stand body.
4
10
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
2 Install the C A B L E M A N A G E M E N T as shown.
First, press the cable management. Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
! NOTE
G Do not hold the C A B L E M A N A G E M E N T when moving the product.
- If the product is dropped, you may be injured or the product may be broken.
11
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
4 inches 4 inches
4 inches 4 inches
4 inches
4 inches 4 inches
4 inches 4 inches
12
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
• Tilt range
PREPARATION
17/20LS5R* 19/22LS4R*
0 3 12~10 0 3
8~12
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the
back of the TV.
When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
13
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PREPARATION
Kensington company. Kensington sells security systems for expensive electronic equipment such as note-
book PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
17LS5R* 19/22LS4R*
20LS5R*
14
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
■ For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
PREPARATION
Multi-family Dwellings/Apartments
Wall
(Connect to wall antenna socket) ANTENNA IN
Antenna
Socket
ANTENNA IN
UHF
Antenna Signal
Amplifier
VHF
■ In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown as above.
■ If signal needs to be split for two TVs,use an antenna signal splitter for connection.
15
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
HD RECEIVER SETUP
When connecting with a component cable (Only 19/22LS4R*)
1 2
3 Press the I N P U T button to select Component
(480i/576i/480p/576p/720p/1080i).
1 2
19/22LS4R*
1 Connect the SET TOP with the D-Sub output socket to
R G B ( P C / D T V ) I N socket on the set and audio cable of
the SET TOP to the A U D I O ( R G B / D V I ) I N.
16
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
HDMI/DVI IN
Connect the HDMI output of the digital set-top box to the
1 H D M I / D V I I N jack on the set.
17
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
DVD SETUP
When connecting with a component cable (Only 19/22LS4R*)
Y PB PR
18
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Connect the Euro scart socket of the DVD to the Euro scart
1 socket of the set.
AV 1
! NOTE
G Please use the shield scart cable. AUDIO/ (R) AUDIO (L)
VIDEO
! NOTE
G TV can receive the video and audio signal simultaneously
with using a HDMI cable.
G If the DVD supports Auto HDMI function, the output resolu-
tion of the source device will be automatically set to
1280x720p.
G If the DVD player does not support Auto HDMI, you need to
set the DVD output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the source device to 1280x720p.
19
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
VCR SETUP
■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of
ANTENNA IN 1
OUTPUT
ANT IN SWITCH
2
Wall Jack
Antenna
1 Connect the RF out socket of the VCR to the aerial socket of the set.
3 Store the VCR channel on a desired programme number using the ‘Manual
programme tuning’ section.
20
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Connect the Euro scart socket of the VCR to the Euro scart
1 socket of the set.
AV 1
! NOTE
G Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV1
can be received. These signals are transmitted, for example, by a pay TV decoder, game machine or
photo CD unit, etc.
G Please use shielded scart cable.
21
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
VCR SETUP
When connecting with a RCA cable VIDEO
L AUDIO R
S-VIDEO
! NOTE
OUTPUT ANT OUT
SWITCH
G If you have a mono VCR, connect the audio cable from
the VCR to the A U D I O L / M O N O jack of the set.
2 1
3 Press the INPUT button to select AV2.
22
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
HEADPHONE SETUP
When connecting with a Headphone cable
23
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
19/22LS4R*
RGB OUTPUT AUDIO
Connect the signal cable from the monitor output socket of
1
the PERSONAL COMPUTER to the PC input socket of the set.
24
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
AUDIO
HDMI/DVI IN
1 Connect the DVI output of the PC to the H D M I / D V I (RGB/DVI) IN
AUDIO
DVI-PC OUTPUT
! NOTE
G If the set is cold, there may be a small “flicker” G Do not press the LCD screen with your finger for
when the set is switched on. This is normal, there a long time as this may produce some temporary
is nothing wrong with the set.
distortion effects on the screen.
G If possible, use the VESA 1280x1024@60Hz
G When the PC screen appears on the set, a mes-
(17LS5R *), 1440x900@60Hz (19LS4R *),
sage may appear on the screen, and the message
1680x1050@60Hz (22LS4R *) video mode to
will differ according to the Window system ver-
obtain the best image quality for your LCD moni-
sion. If a message appears click “Next” until the
tor. If used under the other resolutions, some
message finishes.
scaled or processed pictures may appear on the
G If the message “No signal” appears on the
screen. The set has been preadjusted to the
mode VESA 1280x1024@60Hz(17LS5R *), screen, adjust the PC as in the ‘Displayable
1440x900@60Hz (19LS4R *), Monitor Specification’ section.
1680x1050@60Hz (22LS4R *).
G Some dot defects may appear on the screen, like
Red, Green or Blue spots. However, this will have
no impact or effect on the monitor performance.
25
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
<17LS5R*>
RGB-PC mode RGB-DTV mode
Horizontal Vertical Horizontal Vertical
Resolution Resolution Frequency(KHz) Frequency(Hz)
Frequency(kHz) Frequency(Hz)
<19LS4R*, 22LS4R*>
26
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Auto configure
This function is for the automatic adjustment of the screen
position, clock, and phase. The displayed image will unstable for
a few seconds while the auto configuration is in progress.
OK MENU
1 Press the I N P U T button and then D / E button to select DE FG
2
the RGB.
! NOTE
G Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust
your monitor’s position, clock and phase manually.
27
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
4
WATCHING TV / PROGRAMME CONTROL
9
4 MUTE Switches the sound on or off.
5
PSM Recalls your preferred picture setting.
[without ARC]
28
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
4
8 ARC Select your desired picture format.
7
* No function
2
9
8
/
Installing Batteries
■ Open the battery compartment cover on the back side and install the
batteries matching correct polarity (+with +,-with -).
■ Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
■ Close cover.
29
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TURNING ON THE TV
If your TV will be turned on, you will be able to use its features.
PROGRAMME SELECTION
1 Press the P R D / E or N U M B E R buttons to select a programme number.
VOLUME ADJUSTMENT
30
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
3 Change the setting of an item in the sub or pull-down menu with F / G button.
You can move to the higher level menu by pressing the O K or M E N U button.
! NOTE
a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it pro-
vides graphical presentation.
b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example
to help the TV operation.
c. In the teletext mode, menus are not displayed
31
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
All stations that can be received are stored by this method. It is recom-
mended that you use auto programme during installation of this set.
Station
Auto programme
3 Press the G button. Select a TV system with the G button and Manual programme
Station
Auto programme G To set
4 Press the O K button. Manual programme
Programme edit
Favourite programme
3 4 5 6 7
9 Press the G button to begin auto tuning.
Auto programme
All receivable stations are stored. C 05 BG
To stop auto programming, press the M E N U button. 5 35%
1
BG: PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K./Ireland)
Station
DK: PAL D/K, SECAM D/K (East Europe) Auto programme
Manual programme G To set
L : SECAM L/L’ (France) Programme edit
Favourite programme
2
10 Press the G button and then D / E button to select VHF/UHF
or Cable on the Band menu.
Manual programme
11 Press the O K button. Storage G 29
System
3 4 5 6 7
15 Press the D / E button to select Search. 8 9 10 11 12
13 14 15 16 17
16 Press the G button and then F / G button to commence
search-ing on the Search pull-down menu. If a station is found
the search will stop.
33
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
FINE TUNING
Normally fine tuning is only necessary if reception is poor.
The finely tuned programme will be indicated by orange number-
during programme selection.
Station
Auto programme
WATCHING TV / PROGRAMME CONTROL
1 Press the M E N U button and then D / E button to select the Manual programme
Programme edit
Station menu. Favourite programme
DE FG OK MENU
Press the G button and then D / E button to select Manual
2 programme. 1
Station
Auto programme
Manual programme G To set
3 Press the G button. Programme edit
Favourite programme
4 Press the F / G button to fine tune for the best picture and DE FG OK MENU
sound on the Fine pull-down menu. 2
Manual programme
3 4 5
34
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Station
Press the M E N U button and then D / E button to select the
1 Auto programme
Station
3 Press the G button and then D / E button to select Auto programme
Name. Manual programme G To set
Programme edit
Favourite programme
2
can be saved 5 digits for name.
With the F button you can select in the opposite direction.
Manual programme
Storage
System
Band
Channel
5 Press the F / G button to select the position and make Fine
your choice of the second character, and so on. Search
Name G C 05
DE FG OK MENU
3 4 5 6
6 Press the O K button to store it.
35
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PROGRAMME EDIT
This function enables you to delete or skip the stored pro-
grammes. Also you can move some stations to other pro-
gramme numbers or copy a blank station data into the selected
programme number.
button. 1
2.Press the GREEN button.
All the following programmes are shifted down one position. Station
Auto programme
button.
2.Press the YELLOW button.
3.Move the programme to the desired programme number with DE FG OK MENU
the D / E / F / G button. 2
4.Press the YELLOW button again to release this function.
A Skipping a programme number Programme edit
36
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
FAVOURITE PROGRAMME
This function lets you select your favourite programmes directly.
37
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
! NOTE
WATCHING TV / PROGRAMME CONTROL
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the pro
gramme table indicate there is no station name assigned. Programme List
0 C 03 5 S 69
1 BLN 03 6 S 17
2 C 12 7 S 22
A Selecting a programme in the programme table 3 S 66 8 C 09
Select a programme with the D / E / F / G button. 4 S 67 9 C 11
Then press the O K button. The set switches to the chosen DE F G OK MENU
programme number.
38
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
CHILD LOCK
The TV can be set so that the remote control is needed to con-
trol it. This feature can be used to prevent unauthorized viewing.
Special
DE FG OK MENU
2 Press the G button and then D / E button to select Child
lock. 1
Special
! NOTE
G With the C h i l d l o c k o n, the display ‘Child lock on’ appears on the screen if any button on the front
panel is pressed while viewing the set.
39
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
• 4:3
• Spectacle Following selection will lead you to view a picture with
When your TV receives the wide screen signal, when an original 4:3 aspect ratio, with gray bars appearing at
selected it will adjust the picture horizontally, in non-lin- both the left and right sides.
ear proportion, to fill the entire screen.
4:3
Spectacle DE
• 16:9
• Original
Following selection will lead you to adjust the picture
When your TV receives the wide screen signal, it will be horizontally, in a linear proportion, to fill the entire
automatically changed to the picture format to be sent. screen (useful for viewing 4:3 formatted DVDs).screen
coverage.
Original
16:9
40
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
• 14:9 • Zoom2
You can enjoy the picture format of 14:9 or general TV Choose Zoom2 when you want the picture to
programme through the 14:9 mode. The screen 14:9 is be altered, both horizontally extended and
viewed just like that the screen 4:3 is magnified to the vertically cropped. The picture taking a
left / right. halfway trade off between alteration and
screen coverage.
14:9 DE
• Zoom1 Zoom2 DE
PICTURE CONTROL
Zooml DE
! NOTE
G ARC menu is not available in RGB, HDMI, Component mode except 4:3, 16:9.
41
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
Cinema
2 Press the G button and then D / E button to select PSM. Reset
DE FG OK MENU
Picture
42
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
Picture
Cinema
Reset
Press the G button and then D / E button to select a
3 color setting on the CSM menu: Cool, Normal, Warm or
DE FG OK MENU
User.
1
DE FG OK MENU
2 3
43
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
CSM
Cinema
Reset
1
3 Press the G button and then D / E button to select User.
Picture
PSM G Dynamic
4 Press the G button and then D / E button to select the CSM Standard
desired picture item. Mild
Cinema Game
Reset User
2 3
User
6 Repeatedly press the M E N U button to return to normal TV Contrast 100 G
viewing. Brightness
Colour
50
50
Sharpness 50
Tint 0
Contrast 85 F G
DE FG OK MENU
4 5
44
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
CSM
Cinema
2 Press the G button and then D / E button to select CSM. Reset
DE FG OK MENU
Picture
PSM
4 Press the G button and then D / E button to select Red, CSM G Cool
Normal
Green or Blue. Cinema Warm
Reset User
2 3
Red +20 F G
DE FG OK MENU
4 5
45
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
PSM
CSM
1
This menu is activatived after selecting the User of P S M.
Picture
1 Press the G button and then D / E button to select X D
PSM
Contrast, XD Colour or XD NR. CSM
G Auto
Cinema Manual
Reset
2 Press the G button and then D / E button to select On or
Off.
DE FG OK MENU
Manual
A X D C o n t r a s t : Optimizing the contrast automatically Contrast G On
according to the brightness of the reflection. Colour Off
NR
A X D C o l o u r : Adjusting the colors of the reflection
automatically to reproduce as closely as possible to the
natural colors.
A X D N R : Removing the noise up to the point where it DE FG OK MENU
46
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
DEMO(ONLY 19/22LS4R*)
Use it to see the difference between XD Demo on and XD
Demo off.
Special
PICTURE CONTROL
DE FG OK MENU
2 Press the G button and then D / E button to select XD Demo.
1
DE FG OK MENU
2 3
• XD Demo
™ Off ™ On
MENU Exit
47
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE CONTROL
3
Press the G button and then D / E button to select On or Off.
Picture
PSM
CSM
XD
4 Repeatedly press the M E N U button to return to normal TV
Cinema
Reset
G On
Off
viewing.
DE FG OK MENU
2 3
48
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PICTURE RESET
Returns to the default settings PSM, CSM, XD, Cinema at the
factory.
Picture
PSM
CSM
XD
1 Press the M E N U button and then D / E button to select Cinema
the Picture menu. Reset
PICTURE CONTROL
DE FG OK MENU
Picture
3 Press the G button to initialize the adjusted value. PSM
CSM
XD
Cinema
Reset G To set
2 3
49
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Sound
2 3
50
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
DE FG OK MENU
2 3
51
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Sound
SSM
3 Press the G button and then D / E button to select User. AVL
Balance 0
DE FG OK MENU
User
DE FG OK MENU
52
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
BALANCE
You can adjust the sound balance of speaker to the levels you
prefer.
DE FG OK MENU
2 3
53
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears after
the programme number and station name disappear.
54
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
NICAM Reception
If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by press-
ing the I/II button repeatedly.
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and
right loudspeakers.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio
R input is sent to the right loud speaker.
L+L: Audio signal from audio L input is sent to left and right loud speakers.
R+R: Audio signal from audio R input is sent to left and right loud speakers.
55
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
1 Press the M E N U button and then use D / E button to select the Special
menu.
3 Press the G button and then use D / E button to select your desired lan-
guage or country.
SOUND & LANGUAGE CONTROL
! NOTE
G If you don’t finish set up I n s t a l l a t i o n G u i d e by pressing M E N U button
or time out of OSD (On Screen Display) display, it will continuously
appear until completing set up whenever the set is turned on.
G If you select wrong local country, the teletext may not appear correctly
on the screen and some problem may happen during teletext operation.
G Hebrew is added to C o u n t r y of I n s t a l l a t i o n G u i d e according to the
countries which using Hebrew language.
56
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off time func-
tion.
1
3 Press the G button and then D / E button to set the
hour.
Time
Clock G --:--
TIME SETTING
Off time
Press the G button and then D / E button to set the min- On time
4 utes.
Auto sleep
DE FG OK MENU
57
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TIME SETTING
Off time function overrides On timer function if they are set both
to the same time.
Time
Clock
Off time G -- : --
4 Press the G button and then D / E button to set the hour. On time Off
Auto sleep
2 3
6 For only On timer function
• P r o g r a m m e: Press the G button and then D / E button
to select the programme. Time
• V o l u m e: Press the G button and then D / E button to Clock
Off time
adjust volume level at turn-on. On time G 00 : 00
Auto sleep Pr. 0
Vol. 30
On
7 Press the M E N U button to save.
DE FG OK MENU
4 5 6
8 Repeatedly press the M E N U button to return to normal TV
viewing.
58
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TIME SETTING
! NOTE
G To view the remaining sleep time, press the S L E E P button once.
G To cancel the sleep time, repeatedly press the S L E E P button until the display ‘ - - - ’ appears.
G When you switch the set off, the set releases the preset sleep time.
59
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TIME SETTING
11
Time
Clock
Off time
On time
Auto sleep G On
4 Repeatedly press the M E N U button to return to normal Off
TV viewing.
DE FG OK MENU
2 3
60
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TELETEXT
Teletext (or TOP text) is an optional function, therefore only a set with
the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard tele-
text) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
A Page selection
1 Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
TELETEXT
2 The D / E button can be used to select the preceding or following page.
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the M button to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding
coloured button on the remote control handset.
1 Press a coloured button.
2 Using the NUMBER buttons, select the page you wish to programme.
3 Press the O K button. Then the selected page is stored as the selected page number by blinking once. From
now on, you can select this page with the same coloured button.
4 The three other coloured buttons are programmed in this way.
61
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
TELETEXT
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
1 With the blue button you can progress from block to block.
2 Use the yellow button to proceed to the next group with automatic overflow to the next block.
3 With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the D button can be used.
4 The red button permits to return to previous selection. Alternatively the E button can be used.
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond-
ing coloured button.
TELETEXT
A Page selection
62
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
?
A REVEAL
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
A SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
A UPDATE
Displays the TV picture on the screen while waiting for the new teletext page.
The display will appear at the top left hand corner of the screen. When the updated page is available then
display will change to the page number. Press this button to view the updated teletext page.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The num-
ber of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
TELETEXT
is inhibited. To continue press this button again.
A MIX
Displays the teletext pages superimposed on the TV picture.
To switch the TV picture off press this button again.
A TIME
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display. In the teletext mode, press this button to select a sub page num-
ber. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the
NUMBER buttons.
Press again to exit this function.
63
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
■ Check to see if there is any object between the product and the remote control
causing obstruction.
The remote control ■ Are batteries installed with correct polarity (+ to +, - to -)?
doesn’t work ■ Correct remote operating mode set: TV, VCR etc.?
■ Test the wall power outlet, plug another product’s power cord into the outlet where the
P i c t u r e a p p e a r s s l o w- ■ This is normal, the image is muted during the product startup process. Please contact
ly after switching on your service center, if the picture has not appeared after five minutes.
Horizontal/vertical
■ Check for local interference such as an electrical appliance or power tool.
bars or picture shaking
APPENDIX
64
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
Unusual sound from ■ A change in ambient humidity or temperature may result in an unusual noise when
inside the product the product is turned on or off and does not indicate a fault with the product.
APPENDIX
65
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will
have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
2 Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Extended Absence
CAUTION
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
APPENDIX
66
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com
PRODUCT SPECIFICATIONS
394.5 x 394.0x 169.4 mm 474.1 x 464.6 x 184.3 mm 456.8x 396.6x 172.0mm 525.4 x 441.7x 187.4 mm
Dimensions with stand 15.5 x 15.5 x 6.7 inches 18.7 x 18.3 x 7.3 inches 18.0x 15.6 x 6.8 inches 20.7x 17.4 x 7.3 inches
(Width x Height x Depth)
without stand 394.5 x 352.0 x 66.0 mm 474.1x 419.5 x 72.8 mm 456.8 x 368.5 x 70.5mm 525.4 x 413x 68.6 mm
15.5 x 13.9 x 2.6 inches 18.7 x 16.5x 2.9 inches 18.0x 14.5 x 2.8 inches 20.7 x 16.3 x 2.7 inches
with stand 4.4kg / 9.7 lbs 6.8 kg / 15.0 lbs 5.1 kg / 11.3 lbs 5.8kg / 12.8 lbs
Weight
without stand 4.1kg / 9.1 lbs 6.4kg / 14.1 lbs 4.6 kg / 10.2 lbs 5.2 kg / 11.5 lbs
Power requirement AC100-240V~ 50/60Hz 0.8A AC100-240V~ 50/60Hz 1.0A AC100-240V~ 50/60Hz 0.8A AC100-240V~ 50/60Hz 1.0A
Power Consumption 50W 60W 50W 60W
■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
67
Downloaded from www.Manualslib.com manuals search engine
Ofrecido por www.electromanuales.com