Beruflich Dokumente
Kultur Dokumente
TABLE OF CONTENTS
Chatper
Location of PC Boards & Versions Variation..............................1
Technical specification...............................................................2
Safety instruction........................................................................3
Set Block diagram ......................................................................4
Published by Fei & Sam 1524 Subject to modification 3140 038 62880
Version 1.0
1-1
Location of PC Boards
Jack Board
Main Board Upgrade Board
Key Board
VERSION VARIATION
Type /Versions:
SB365B
Features Feature diffrence /37
RDS
VOLTAGE SELECTOR
ECO STANDBY - DARK
Owners
Functions Name Comment
Project Management (approver) Vincent Ko
Product Management Christy Mak
Electrical Engineering Xu Teng
Mechanical Engineering Hugo Yu
Software Engineering Elong Wang
Acoustics Engineering Ainsly Zhang
Development Quality Emil Wu
Industrial Operation K.K
Document History:
Revision Description of Change Functions Prepared by Date
V0.1 1stproposal Electrical Xu Teng 2015‐02‐03
References:
• Audio Product Performance Handbook
• Audio Product Quality&Reliability Handbook
Confidential © WOOX Innovations Limited
All rights are reserved. Reproduction in whole or in part is
Template ver 2.0 prohibited without the written consent of the copyright owner
Reference: WX-B-009-01 Title: Product Performance Specification Rev./Status: 0.1
Model : SB365B Page 3 of 23
Contents
1 General............................................................................................................................................................. 6
2 Models and Versions ........................................................................................................................................ 7
3 Mechanical Performance .................................................................................................................................. 7
3.1 General Mechanical Performance and Specification .................................................................................. 7
3.2 Product profile............................................................................................................................................. 7
3.2.1 Product weight .................................................................................................................................... 7
3.2.2 Product size (LxWxH) ......................................................................................................................... 7
3.3 Cosmetic and Finishing .............................................................................................................................. 7
3.3.1 MUS .................................................................................................................................................... 7
3.3.2 PGD .................................................................................................................................................... 7
3.3.3 Colour Chip ......................................................................................................................................... 7
3.4 Mechanical Operation ................................................................................................................................. 7
3.5 Mechanical Strength and Reliability............................................................................. 错误!未定义书签。
3.6 Bare drop (optional) .................................................................................................................................... 9
3.7 Others ......................................................................................................................................................... 9
4 Packaging, Storage and Transportation ......................................................................................................... 10
4.1 Package Instruction .................................................................................................................................. 10
4.2 Packaging Stacking Instruction – PSI (Container loading) ....................................................................... 10
4.3 Special packing requirement (for specific items/Retailer only) .................................... 错误!未定义书签。
4.4 Label’s briefing.......................................................................................................................................... 10
4.5 Others ....................................................................................................................................................... 10
5 Electrical Performance ................................................................................................................................... 10
5.1 General Requirement ............................................................................................................................... 10
5.1.1 Safety Standards...............................................................................................................................10
5.1.2 EMC Standards ................................................................................................................................. 10
5.1.3 ESD Standards ................................................................................................................................. 11
5.2 Electrical Performance.............................................................................................................................. 11
5.2.1 Power Supply and performance ........................................................................................................ 11
5.2.2 Bluetooth and WiFi ............................................................................................................................ 12
5.2.3 Clock specification ............................................................................................................................ 12
5.2.4 AM/FM Tuner .................................................................................................................................... 13
5.2.5 Electrical Miscellaneous (NA) ........................................................................................................... 13
5.3 Audio Performance (*1) ............................................................................................................................ 14
5.4 Video Performance ...................................................................................................... 错误!未定义书签。
5.4.1 HDMI .................................................................................................................... 错误!未定义书签。
5.4.2 Composite and Components ................................................................................ 错误!未定义书签。
5.5 Remote Control (refer to performance Handbook) ................................................................................... 15
5.6 Key components list.................................................................................................................................. 15
1 General
DEPICTION DESCRIPTION
Pairing button 1
Metal grille 2
Metal rotary Volume/On/Off button 3
3.5mm Audio in socket 4
Micro USB socket 5
Rubber cover 6
REMARK
3 Mechanical Performance
Product w/ D-Box
Dimension (mm)
Product w/ D-Box
3.3.1 MUS
Refer to :SB365B_MUS
3.3.2 PGD
Refer to :SB365B_PGD
3.4.1 Gaps
- Gaps between metal grille & plastics body, even gap < 0.6mm
Confidential © WOOX Innovations Limited
All rights are reserved. Reproduction in whole or in part is
Template ver 2.0 prohibited without the written consent of the copyright owner
Reference: WX-B-009-01 Title: Product Performance Specification Rev./Status: 0.1
Model : SB365B Page 9 of 23
- Gaps between metal vol. knob (plain surface) & body surface, even gap < 0.8mm
- Gaps between metal vol. knob & the circular rail , even gap <= 0.7mm
-
- Wobbling of the metal knob: 0.4mm (max.) between metal knob & metal grille
-
- Gaps between rubber cover & rubber foot , even gap < 1.0mm
- Pair key gap: 0.5mm (even)
-
3.4.2 Socket
- USB socket depth: 1mm
-
- Headphone socket extruded height 0.3
- :
-
Confidential © WOOX Innovations Limited
All rights are reserved. Reproduction in whole or in part is
Template ver 2.0 prohibited without the written consent of the copyright owner
Reference: WX-B-009-01 Title: Product Performance Specification Rev./Status: 0.1
Model : SB365B Page 10 of 23
3.4.3 Operation
- Metal vol. knob, activation force : > 3N or 0.3Nm (torgue)
- Open force of Rubber cover: > 5N
- Close force of Rubber cover > 5N
Refer to Performance Handbook for BL Audio V1.0 and Quality and Reliability Handbook for BL Audio V1.0
- The micro USB can sustain 5N insertion force @ 3000 insert/ pull-out
- The metal grille can sustain 5N normal force without permanent change or dent mark
- The paring key on rubber cover can sustain 5N normal force
3.7 Others
All the Control Buttons/Tact Switch, Connectors/Jack and other moveable mechanism
must be complied with mechanical strength test criteria according to WOOX requirement.
N/A
N/A
1.5 Others
N/A
1.7 Others
n.a
2.4 Others
n.a
3 Electrical Performance
Where applicable:
For /12 (EU), /05 (UK), /51 (Russia) EN/IEC 60065 7th Edition
For /98 (AP), /69 (Singapore), /75 IEC 60065 7th Edition
(Australia)
For /12 (EU), /05 (UK), /51 (Russia) EN55013: 2001, EN55020: 2002
The product shall withstand electro static discharges on all user accessible parts of the product.
Reference: IEC61000-4-2.
General requirement:
1. 10 arcs for positive and negative polarity for unit “on” and “off” for 1kV incremental steps.
2. Component or mechanical damage is not allowed. No loss of fixed stored data (stored in
EEPROMs).
3. Hang-ups and malfunctions are allowed, as long as the customer can “recover” from the hang-
up by pressing the Standby or ON/OFF button of the set.
4. Failures that disappear only by unplugging the AC mains cord and/or power sources are not
acceptable.
2. Power ada
aptor info:
Alll requiremen
nts per define
ed for each country
c shoulld be met witth sufficient testing.
t
Po
ower consum
mption at nom
minal AC inpu
ut:<0.5W at ECO
E mode ((For /12 )
3.2.3 Blu
uetooth
3.2
2.3.1 Bluettooth
General Part
Bluetooth
h module CSR8630
C
BT Audioo
Descrription Normal Lim
mited un
nit remark
Frequencyy Response ? Hz ~16kHz + / -3dB dB
S/N (A-weeighted) 70
7 65 dBA
Channel Separation
S 50
5 45 dB
THD + Nooise ( 0dB, 1K
Khz ) <1%
< <1.5%
Bluetooth at Set Level
10%THD OUTPUT
O PO
OWER(EQ:FLAT) 2 X 4W 2 X 3.8
8 W
Connected d distance 10 8 me
eter
NFC
Connected
d distance Normal:2.5cm
N m Limit:1.5CM CM
M
3.2.4 Clo
ock specifica
ation: N.A
TE
ECHNIAL DESCRIPTI
D ION
SO
OFTWARE IMPLEMENTED CLO
OCK / TIMER FUNCTIO
ON WITH 32.768kHz Q
QUARTZ OSCILLATO
OR.
GENERAL PART
P
IN
NDICATORS
Diisplay Type : LED modele
Con
nfidential © WOO
OX Innovatio
ons Limited
All rights are reserved. Reproducttion in whole or in pa
art is
Temp
plate ver 2.0 prohibited witthout the written cons
sent of the copyright owner
Reference: WX-B-009-01 Title: Product Performance Specification Rev./Status: 0.1
Model : SB365B Page 14 of 23
Noise
Large
Limited Image IF
FM Frequency (MHz) Signal
Sensitivity Rejection Rejection
Handling
26 dB
FM Nom. 18 116 dBf
88.0 Lim. 22 108 dBf
FM Nom. 18 116 dBf
98.0 Lim. 22 108 dBf
FM Nom. 18 116 dBf
107.0 Lim. 22 108 dBf
Units dBf dB dB dBf
Noise
Large
Limited Image IF
AM Frequency (KHz) Signal
Sensitivity Rejection Rejection
Handling
26 dB
MW Nom. 70 1000
610KHz Lim. 75 500
MW Nom. 65 1000
1000KHz Lim. 73 500
MW Nom. 65 1000
1440 kHz Lim. 73 500
Units dBuV dB dB mV/m
General Part
Output Stage Protection: NA Temperat Yes Short Circuit: Yes
ure :
Indicators
Standby Mode Indicator: Clock Display Active
Power Standby Mode: LED Turns Off
Electrical Data
DSC: Refer to acoustic EQ setting. Hum (Volmin) <0.4mV
DBB: HumVol max -20dB <0.5mV
Bass: THD,Maximal <1%
Treble: SNR @standard output ≥65dB
(A-weighted)(*1):
Loudness:
Audio Input
Audio Input Sensitivity(±3dB) rated output power at 1kHz Audio Output(*1)
Tuner FM 67.5kHz, Modulation (Limit:-6dB) Line Out(Left/Right) NA
CD/MP3 0dB track (Audio Disc 1, Track 1) Headphone NA
USB 0dB 1KHz sine wave( 2.0HS)
AUX1(back) 2V±100mV; Rin≥22kΩ
MP3_link(front) 1V±100mV; Rin≥22kΩ
Output Power Input: 1KHz 0 db, sine wave
Audio_in (3.5mm)/AUX
REMARKS:
1* ) Electrical Parameters are measured at Speaker Terminals across rated impedance
Load(such as 6ohm) with Rated Input Signal in CD Mode setting in DBB/Loudness Off and
Pre-eq at Flat unless specified otherwise.
2* ) Special requirement for commercial output power, with aux in or audio_in input, increase
input level to achieve 30%THD. Normally test with one channel
Parameters Requirement
Receiver sensitivity Max
Distance
• E(0°) = 0.70 mW/m2
10m
2
Receiver Sensitivity • E(30°,h) = 1.12 mW/m , γ= ± 30°
off horizontal or vertical axis 7.92m
1 Display LED 2
2 Amplifier TDA7491LP (SSO‐36) 1
3 MCU STM8S003K3T6C LQFP32 7x7 需烧录 1
5 Power AC ADAPTER 110‐240V 9V5/1.6A UL FOR 1
adaptor SB365B
6 NFC BT NFC MODULE 14x24mm FOR AZ1890T 1
8 Speaker SPEAKER 2.5" 4Ω 5W CDF6464A‐019G 2
3.6 Accessory
Model
Region USA
AV cable N.A
Battery N.A
IFU Yes
3.7 Others
4 Acoustic Performance
2 x 4W in 4 ohm@10%THD Max power with 10% THD and
4.3.1 Output power (RMS)
Electronics battery is full charging.
range
4.4.15 Leakage
prevention EVA NA
Cushion
Test
No. Item Requirement
condition/description
4.5.1 CROSSOVER filter target
complexity
To be confirmed by 4.3.4
NA requirement and listening
test
4.6 Others
5 Software Performance
Refer to latest Functional Requirement Specification (FRS).
Philips Specified CD
MP Check Item to Requirement / Test condition / be recorded,
Device setting
CTQ freqency check Specification description with product
identification
number
Information
ME Section
that needs to
Test
Main unit (amplifier)
MP Check be recorded,
Item to check Requirement / Specification condition/descripti Device setting
CTQ frequency with product
on
Visual inspection
identification
Speaker box
number
Silent room
Key Fitting
Within specified dimension in Q-
Dimension &
IQC DWG, both complete set and CTQs
Tolerance in
check components must be fulfilled the Refer to Q-DWG or Refer to PQR or Dimensions
YES x complete set x
according CTQs dimension (compared with specification in PPS PPS Measurment
level and/or
to AQL approved Reference Samples(CR) Report
components
performance).
level
Cosmetic Defects include but not
Cosmetic limited to parting Line step, Refer to general Cosmetic
Refer to PQR or
YES Full x Defects (for Flash/Burr, Welding line, sink PQR or specification x x Inspection
PPS
specific item) mark… must be within the approved in PPS Report
sample.
Ensure that the rubber is fully
IQC
closely tightly to prevent water going
check The rubber
YES x in x
according cap diameter
31mm (+0.2/-0.1)
to AQL
See sketch below
OQC
Gap between pairing button & body
check Pairing Button
YES x 0.5mm (+/-0.1) (even) x x
according Gap
to AQL
Pairing Button
YES Full x x
alignment
Test Result
Standa Sample Size
S/N Test Items Test Method Unit USL LSL rd DPM
Average Cpk DVT
Deviati O
on
10%THD @ output
Power (AC using 1k 0dB
1 W 3.6 #DIV/0! #DIV/0! #DIV/0! 20
adaptor mode, at signal
speaker end)
using 1k 0dB
2 S/N (A- weighted) dB 60 #DIV/0! #DIV/0! #DIV/0! 20
signal
Electrical Hum
3 Noise (Pmax- mv 0.5 #DIV/0! 0.01 #DIV/0! 20
20dB)
Using "1
minute track" at No rattling
4 Rattling noise 20
Max volume, noise
BT mode
use air pressure
jig 3.0P , then
5 Air leakage 1 #DIV/0! #DIV/0! #DIV/0! 20
after 10s, to test
the air pressure
80Hz - 18KHz
refer to Photo
6 SPL measurement +/- 2dB refer to 20
for Curve
Golden sample
test with
iPhone5s,
7 BT range m 15 #DIV/0! #DIV/0! #DIV/0! 10
iPhone6 &
Samsung S5
iPhone6 <->
iPhone5s,
iPhone5s <->
Nexus5
Nexus5<->
Samsung S5
8 2 #DIV/0! #DIV/0! #DIV/0! 5
Samsung S5 <-
> iPhone6
change 3 times
To measure the between each
change over time to phone pair to
Multi-pairing mode get average data
smoothly s
Put one flat
No deformation
sheet on the top
with 10KG force
9 surface, then No deformation 10
on AL cabniet top
add 10Kg
side
loading for 30s
Gap between metal
grill & AL cabniet collect data at
10 mm 0.3 #DIV/0! #DIV/0! #DIV/0! 10
(Al cabiet& PR left/middle/right
side rubber)
BLOCK DIAGRAM
5-1 5-1
WIRING DIAGRAM
6-1 6-1
Dismantling of the Top cover, Sound box cover, Bottom cover, Grill front and Grill rear.
1) Remove the cut sheet on the top cover, then remove 9 screws A as indicated to loosen the top cover.
2) Remove 20 screws B and 6 screws C as indicated to loosen the sound box cover, bottom cover, grill front and grill rear.
A C
B
C
7-1 7-1
EXPLODED VIEW