Beruflich Dokumente
Kultur Dokumente
List of Experiments
1. To write a program to obtain the facing cycle in the CNC Lathe.
2. To write a program to obtain the turning cycle in the CNC lathe.
3. To write a program to obtain the step turning cycle in the CNC lathe.
4. To write a program to obtain the taper turning cycle-1 in the CNC lathe.
5. To write a program to obtain the taper turning cycle-2 in the CNC lathe.
6. To write a program to obtain the circular interpolation in the CNC lathe.
7. To write a program to obtain the drilling cycle in the CNC lathe.
8. To write a program to obtain the threading cycle in the CNC lathe.
9. To write a program to obtain the grooving cycle in the CNC lathe.
List of Equipments
CNC Lathe machine.
MANDAVA INSTITUTE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
VIDYA NAGAR, JAGGAIAH PET- 521275, KRISHNA DIST., A.P., INDIA
www.mandava.ac.in, E-mail: mietenggcollege@gmail.com, Phone: 08654 226868, 226768
Do’s
Always keep the area around the machine clear of obstacles.
Always stack material where you can reach it but where it is clear of the moving parts of
the machine.
Always check that tools are sharp and set correctly.
Read labels carefully.
Wear gloves when using any hazardous tools.
If you have long hair or loose clothes, make sure it is tied back or confined.
If leaving a lab unattended, turn off all ignition sources and lock the doors.
Wash hands before leaving the lab and before eating.
Don’ts
Never wear gloves.
Never wear loose clothing or jewelry.
Never place hands near a revolving spindle.
Never leave the machine so that someone else is able to start it by pressing the cycle start
button.
Never eat, drink, or smoke while working in the laboratory.
Never work alone in laboratory.
Do not use any equipment unless you are trained and approved as a user by your Lab
staff..
Never, ever modify, attach or otherwise change any high voltage equipment.