Beruflich Dokumente
Kultur Dokumente
ANCHORS AND
CONSTRUCTION
CATALOG
CONTENT
Mechanical Heavy Duty Anchors
Fixanchor W-FAZ/S 4-5
Fixanchor W-FAZ/A4, W-FAZ/HCR 6-7
Fixanchor W-FAZ-IG/S 8 - 10
Fixanchor W-FAZ-IG/A4, W-FAZ-IG/HCR 11 - 13
W-FA/S, W-FA/F 14 - 16
W-FA/A4, W-FA/HCR 17 - 18
W-FA-IG/ A4, W-FA-IG/ HCR 19 - 20
Nail Anchor W-NA-K 21 - 22
Nail Anchor W-NA-K/A4 23 - 24
Nail Anchor W-NA-K/HCR 25 - 26
W-BS Concrete Screw 27 - 32
W-HAZ/ S 33 - 36
W-HAZ/ A4 37 - 38
W-ED/ S 39 - 40
W-ED/ A4 41 - 42
WSL-ED Drive-in Anchor 43
Brass Anchor 44 - 45
W-HD 46 - 47
Heavy Duty Anchor WSL - TAM 48 - 49
Metal Frame-Fixing Anchor WUS 10 50 - 51
W-VIZ/S and WIT-VM 100 52 - 55
W-VIZ/A4 and WIT-VM 100 56 - 59
WIT-VM 100 for W-VIZ/S, W-VIZ/A4 60
W-VIZ-IG/S Injection System 61 - 63
W-VIZ-IG/A4, W-VIZ-IG/HCR Injection System 64 - 66
Hollow Profile Fastener BOXBOLT® 67
Chemical Anchors
W-VP 70 - 71
W-VP-IG/S, W-VD-IG/A4 Shear Anchor Internal Thread Cartridge System 72 - 73
Injection System WIT-PE 500 74 - 76
Battery Powered Application Gun WIT 77
Injection System WIT-VM 250 78 - 80
Injection System WIT-PM 200 81 - 84
Cleaning Accessories 85
Threaded rods 86
Insulation Anchors
Metal Insulation Anchor W-MDD 126 - 127
W-LTX10 128 - 130
W-DE Iinsulation Anchor 131 - 133
Power Tools
Overview of Hammer Drills 150
Hammer Drill Bits 151 - 152
SDS-PLUS DUO-S VARIO Hammer Drill Bits 153 - 154
Cordless drill screwdriver BS 18-A Light 155
SDS rotary hammer drill 156
EHD 40-MLS COMBI HHammer Drill 157
Combihammer BMH 45-XE 158
Benefits:
• All the many approvals guarantee its
reliable function for all applications even in
cracked and non-cracked concrete.
• The optimized unit of cone bolt and expansion
sleeve avoids concrete spalling at smallest edge
distances too.
• The length identifier on the front end of the bolt
Machine Setting Tool facilitates the inspection of correct installation.
Art. No. 0904 908 016 • The multitude of types offers the most economic
anchor for all applications in any case. In
particular the one with the big washer is mainly
used in timber construction.
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Metal structures, metal profiles, brackets, foot plates, supports, cable Cracked
Suitable for concrete
conduits, piping, railings, wooden structures, beams. Non-cracked concrete
04
W-FAZ/S
W-FAZ/S
h1
hef tfix
FIXANCHOR W-FAZ/S
hmin
Benefits:
• All the many approvals guarantee its
reliable function for all applications even in cracked
and non-cracked concrete.
• The optimized unit of cone bolt and expansion sleeve
avoids concrete spalling at smallest edge distances
too.
• The length identifier on the front end of the bolt
Machine Setting Tool facilitates the inspection of correct installation.
Art. No. 0904 908 016
• The multitude of types offers the most economic
anchor for all applications in any case. In particular
the one with the big washer is mainly used in timber
construction.
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions
Indoor, outdoor
Material composition A4 stainless steel / HCR Highly
corrosion-resistant steel
Type of fastening Through-fastening
Cracked
Suitable for concrete
Metal structures, metal profiles, brackets, foot plates, supports, Non-cracked concrete
cable conduits, piping, railings, wooden structures, beams.
06
W-FAZ/A4
W-FAZ/A4
FIXANCHOR W-FAZ/A4, W-FAZ/HCR h1
hef tfix
hmin
Benefits:
+ + • All screws/bolts available in the product line can be
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B used for both pre fastening and through fastening.
• Immediately loadable – no waiting time.
Cotter-pin installation Through-bolt mounting • Also suitable for temporary fastening
(pre fastening, e.g. stadium seats for flexible use flush
+ + with surface without danger of injury).
+ +
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B
Important information!
Please only set the W-FAZ-IG fixing anchor together with the
l
related, approval-conformant setting tools (anchor system).
Applications: l Hexagon bolts, countersunk head screws, washers, countersunk
head washers and nuts are specially coated and only permissible Technical Data:
st Reports Important information!
in anchor system in accordance with ETA-02/0017. Therefore,
l Pleaseplease
only setorder separately
the W-FAZ-IG fixingatanchor
the same timewith the 1) (see product
together Head configuration Inner thread
Fire information,
related Page 3).setting tools (anchor system).
approval-conformant Environmental conditions Indoor, dry conditions
l Hexagon
l Commonbolts, countersunk head screws, 2) washers, countersunk
esistance threaded rods may only be used if the conditions Material composition Steel, galvanized
head washers and nuts are specially coated and only permissible
specified
systeminin the approval withETA-02/0017 (Appendix5, Table 3)
ect flame effect in anchor accordance ETA-02/0017. Therefore, Pre
Type of fastening fastening /
F30 – F120 please(material quality,atdimensions,
order separately the same timemechanical properties
1) (see product according
TK-DIN 4102-2: to EN10204:2004)
information, Page 3). are met. Through-fastening
1977-09)
l The threaded
l Common torque necessary
rods ) for
mayanchoring can
only be used beconditions
if the applied with Würth for Cracked concrete
2
specified in thewrenches
approval ETA-02/0017
Suitable
torque and suitable(Appendix
attachments 5, Table 3)
(insertion open-end Non-cracked concrete
(material quality, dimensions, mechanical properties according
wrench).
to EN 10204:2004) are met.
The torque necessary for anchoring can be applied with Würth
l
Metal structures, metal
torque profiles,
wrenches and suitable attachments (insertion open-end
l Immediately
brackets, foot plates,
wrench). supports,loadable – no waiting time
l Fixing anchor cone with patented plastic coating enables reliable expansion later
ackets, footcable
plates,conduits, piping,
2. Advantages
l Elegant appearance thanks to countersunk head screws for visible fastening with Range of loading: C20/25
eams, stadium
railings, wooden simultaneous
l High loads, highand
small axle bases load-bearing capacity (e.g. railings)
edge clearances
ot plates, supports, l All lscrews/bolts available in the product line (see product information, Page 3) can be used
Also suitable for temporary Size M6 M8 M10 M12
s, reinforced
ned etc. or non- for both cotter-pin and through-bolt mountingfastening (cotter-pin mounting, e.g. stadium seats for
or non-reinforced l Can be flexible use – flush
loaded immediately with
– no waitsurface
time without danger of injury) hef [mm] 45 58 65 80
0/25
50/60 and at most
in accordance l Fixed
l anchor
Reliable coneinstallation
with patented due
plastictocoating facilitates of
application reliable later expansion
prescribed torque
l Elegant appearance thanks to countersunk head screws for visible fastening with Non-cracked concrete
(concrete tensile zone) simultaneous high load-bearing capacity (e.g. railings)
ncrete
re app
out
(concrete
zone)roval)
l 3. Properties
Also suitable for temporary fastening (cotter-pin mounting, e.g. stadium seats for flexible
use – flush with surface without danger of injury)
Nrec [kN] 4.8 6.3 7.9 11.9
Vrec1) [kN] 3.3 3.9 5.9 14.7
own
one weight, l l Force-controlled/torque-controlled
Reliable spreading anchor of electrogalvanized steel
installation due to application of prescribed torque
gs) in the sizes M6, M8, M10 and M12 Vrec2) [kN] 2.9 4.3 6.2 13.9
tdoors
ads
(including
specially aggressive con- 3. Properties
l Galvanized steel M6 – M12: ETA-02/0017 for individual fastening Cracked concrete
cderloads l (Option 1, uncracked spreading
Force-controlled/torque-controlled and crackedanchor concrete)
of A4 stainless steel in the sizes M6,
Nrec [kN] 2.0 3.6 4.8 7.9
especially M8,l M10 and M12
lternating immersion in Dimensioned in accordance with the “European Technical App roval Guideline
Stainless steel A4 and HCR highly corrosion resistant steel, M6 – M12:
ooms
orine in indoor pools
l
(ETAG)forfor
ETA-02/0017 Metalfastening
individual Anchors for 1,Anchoring
(Option uncracked and in cracked
Concrete”,
concrete)Part 2 (ETAG 001-2) Vrec1) [kN] 3.3 3.9 5.9 14.7
l l Fire resistance
Dimensioned in accordance (anchoring base:Technical
with the “European concrete App C20/25 to C50/60):
roval Guideline (ETAG) for R30, R60, R90, Vrec2) [kN] 2.9 4.3 6.2 13.9
Metal Anchors for Anchoring in Concrete”, Part 2 (ETAG 001-2)
R120:(anchoring
Fire resistance Technical Report
base: concreteTRC20/25
020 “Assessment
to C50/60): of anchoring in concrete with regard 1) 2)
l
to the
R30, R60, R90,fire resistance”
R120: (included
Technical Report TR 020in“Assessment
ETA-02/0017)
of anchoring in concrete for pre fastening for through fastening
Installation:
rmation, Page 3)
with regard to the fire resistance” (included in ETA-02/0017)
F30, F60, F90, F120 (W-FAZ-IG/A4): Fire stress pursuant to DIN 4201-2:1977-09
(ETK – Einheitstemperaturkurve (uniform temperature curve))
Flush Installation Through Installation
Through-bolt mounting
Through-bolt mounting
08
Apply torque Drill hole Clean drilled
hole
Knock in anchor
with setting tool
Apply torque
Pre
fastening do h2 l tfix tfix ØxlG
mm mm mm mm mm mm Qty.
W-FAZ-IG/S M6-12-14/50 0904 706 110 8 60 50 12 14 M6 x 20 100
W-FAZ-IG/S M8-8-15/62 0904 708 110 10 75 62 8 15 M8 x 22 50
W-FAZ-IG/S M10-11-19/70 0904 710 110 12 90 70 19 11 M10 x 23 25
W-FAZ-IG/S M12-14-21/86 0904 712 110 16 105 86 21 14 M12 x 27 20
Through fastening
Screw hexagon head DIN 933
Pre fastening
tfix ØxlG SW
mm mm Qty.
09
W-FAZ-IG/S
Countersunk Screw DIN7991
Pre - fastening
tfix ØxlG SW
mm mm Qty.
Typ SK M6 x 25 0904 706 130 8.8 6-14 M6 x 25 Tx 30 100
Typ SK M8 x 30 0904 708 130 8.8 9-15 M8 x 30 Tx 40 50
Typ SK M10 x 30 0904 710 130 8.8 8-11 M10 x 30 Innen 6-kt. 6mm 25
Typ SK M12 x 35 0904 712 130 8.8 9-14 M12 x 35 Innen 6-kt. 8mm 20
Through fastening
++ +
Ty p e B
Pre fastening
Ty p e S Ty p e S K Ty p e B
0904 706 150 0904 708 150 0904 710 150 0904 712 150
washer 1)
ETA-02/0017)
Through fastening
+
rete surface)
0904 706 050 0904 708 050 0904 710 050 0904 712 050
approval-conformant setting tools (anchor system). specified in the approval ETA-02/0017 (Appendix 5, Table 3)
n bolts, countersunk head screws, washers, countersunk(material quality, dimensions, mechanical properties according
ashers and nuts are specially coated and only to EN 10204:2004) are met.
permissible
r system in accordance with ETA-02/0017. Therefore,l The torque necessary for anchoring can be applied with Würth
rder separately at the same time torque
1) (see wrenches and suitable attachments (insertion open-end
product
on, Page 3). wrench).
n threaded rods 2 ) may only be used if the conditions
d in the approval ETA-02/0017 (Appendix 5, Table 3) 2. Advantages
l quality, dimensions, mechanical properties according
l High loads, small axle bases and edge clearances
es, brackets, foot
0204:2004) areplates,
met. supports, l All screws/bolts available in the product line (see product information, Page 3) can be used
ms, stadium seats, etc.
ue necessary for anchoring can be applied for both cotter-pin and through-bolt mounting
with Würth
used in reinforced or non-reinforced l Can be loaded immediately – no wait time
wrenches andC50/60
5 and at most suitableinattachments
accordance (insertion open-end
l Fixed anchor cone with patented plastic coating facilitates reliable later expansion
l Elegant appearance thanks to countersunk head screws for visible fastening with
ed concrete (concrete tensile zone) simultaneous high load-bearing capacity (e.g. railings)
antages
e)
ural stone (without app roval)
l Also suitable for temporary fastening (cotter-pin mounting, e.g. stadium seats for flexible
use – flush with surface without danger of injury)
small axle (e.g.
atic loads basesown andweight,
edge clearances l Reliable installation due to application of prescribed torque
.olts available
façades, in the product line (see product information, Page 3) can be used
railings)
ndoor rooms, outdoors mounting
er-pin and through-bolt
ded
ooms immediately
10
– no wait time
(including
if no especially aggressive con- 3. Properties
r cone with patented plastic coating facilitates reliable later expansion
earance l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
an be usedthanks to countersunk
under especially head screws for visible fastening with
M8, M10 and M12
sg.high load-bearing
continuous, capacity
alternating (e.g. railings)
immersion in
ee for temporary fastening (cotter-pin mounting, l Stainless
e.g. stadium steel A4
seats for and HCR highly corrosion resistant steel, M6 – M12:
flexible
containing chlorine in indoor pools ETA-02/0017 for individual fastening (Option 1, uncracked and cracked concrete)
with surface without danger of injury)
W-FAZ-IG/A4, W-FAZ-IG/HCR
FIXANCHOR W-FAZ-IG/A4, W-FAZ-IG/HCR Approved for:
Concrete C20/25 to C50/60
Cotter-pin installation Through-bolt mounting
Benefits:
• All screws/bolts available in the product line
+ + can be used for both pre fastening and through
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B fastening
–
• Immediately loadable – no waiting time.
• Also suitable for temporary fastening
Cotter-pin installation Through-bolt mounting (pre fastening, e.g. stadium seats for flexible
+ +
use- flush with surface without danger of injury)
+ +
7)
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B
Machine Setting
+ Tool +
Approvals and Certificates:
2.3.Advantages
Properties
outdoors (including
o especially aggressive con- Range of loading: C20/25
l l Force-controlled/torque-controlled
High loads, small axle bases and edgespreading clearances anchor of A4 stainless steel in the sizes M6,
otunder especially
plates, supports, l All M8, M10 andavailable
screws/bolts M12 in the product line (see product information, Page 3) can be used Size M6 M8 M10 M12
s,s, alternating
etc. immersion in l Stainless
for steel A4
both cotter-pin andand HCR highly
through-bolt corrosion resistant steel, M6 – M12:
mounting
chlorine in indoor pools
ed or non-reinforced l CanETA-02/0017 for individual
be loaded immediately fastening
– no (Option 1, uncracked and cracked concrete)
wait time hef [mm] 45 58 65 80
50/60 in accordance l l Dimensioned
Fixed anchor cone in accordance
with patentedwith the “European
plastic Technical
coating facilitates App later
reliable roval Guideline (ETAG) for
expansion
l Metalappearance
Elegant Anchors forthanks
Anchoring in Concrete”,
to countersunk head Partscrews
2 (ETAG 001-2)fastening with
for visible Non-cracked concrete
(concrete tensile zone) l Fire resistance
simultaneous high(anchoring
load-bearing base: concrete
capacity (e.g.C20/25
railings)to C50/60):
l AlsoR30, R60,for
suitable R90, R120: fastening
temporary Technical(cotter-pin
Report TRmounting,
020 “Assessment of anchoring
e.g. stadium seats for in concrete
flexible Nrec [kN] 4.8 6.3 7.9 11.9
out app roval) usewith regard
– flush
F30, F60,
withtosurface
the firewithout
F90, F120
resistance” (included
danger in ETA-02/0017)
of injury) Vrec1) [kN] 3.3 5.3 6.1 13.5
own weight, l Reliable installation due to (W-FAZ-IG/A4): Fire stresstorque
application of prescribed pursuant to DIN 4201-2:1977-09
gs) (ETK – Einheitstemperaturkurve (uniform temperature curve)) Vrec2) [kN] 4.2 4.3 5.5 16.9
tdoors (including
specially aggressive con- 3. Properties Cracked concrete
l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
der especiallyMetal structures, metaland profiles,
M8,Through-bolt
M10 M12 mounting brackets, foot plates, supports, Nrec [kN] 2.0 3.6 4.8 7.9
lternating immersion in l Stainless steel A4 and HCR highly corrosion resistant steel, M6 – M12:
orine in indoorcable
pools conduits, piping,forrailings,
ETA-02/0017 wooden
individual fastening structures,
(Option 1, uncrackedbeams, stadium,
and cracked concrete)
Vrec1) [kN] 3.3 5.3 6.1 13.5
seats.
l Dimensioned in accordance with the “European Technical App roval Guideline (ETAG) for
Metal Anchors for Anchoring in Concrete”, Part 2 (ETAG 001-2)
Vrec2) [kN] 4.2 4.3 5.5 16.9
l Fire resistance (anchoring base: concrete C20/25 to C50/60): 1) 2)
R30, R60, R90, R120: Technical Report TR 020 “Assessment of anchoring in concrete for pre fastening for through fastening
Installation: with regard to the fire resistance” (included in ETA-02/0017)
F30, F60, F90, F120 (W-FAZ-IG/A4): Fire stress pursuant to DIN 4201-2:1977-09
(ETK – Einheitstemperaturkurve (uniform temperature curve))
Flush Installation Through Installation
hor Apply torque Drill hole Clean drilled Knock in anchor Apply torque
ool Through-bolt mounting
hole with setting tool
Apply torque Drill hole Clean drilled Knock in anchor Apply torque 11
hole with setting tool
W-FAZ-IG/A4, W-FAZ-IG/HCR
Article description Art. No. Drill dia. Min. drill hole Anchor Fixture Fixture Thread
depth length thickness thickness size PU
Typ S Typ SK
Pre
fastening do h 2 l tfix tfix ØxlG
mm mm mm mm mm mm Qty.
W-FAZ-IG/A4 M6-12-14/50 0904 806 110 8 60 50 12 14 M6 x 20 100
W-FAZ-IG/A4 M8-8-15/62 0904 808 110 10 75 62 8 15 M8 x 22 50
W-FAZ-IG/A4 M10-11-19/70 0904 810 110 12 90 70 19 11 M10 x 23 25
W-FAZ-IG/A4 M12-14-21/86 0904 812 110 16 105 86 21 14 M12 x 27 20
Through fastening
Screw hexagon head DIN 933
Pre fastening
tfix ØxlG SW
mm mm Qty.
12
W-FAZ-IG/A4, W-FAZ-IG/HCR
Countersunk Screw DIN7991
Pre - fastening
tfix ØxlG SW
mm mm Qty.
Typ SK M6 x 25 0904 806 130 A4 6-14 M6 x 25 Tx 30 100
Typ SK M8 x 30 0904 808 130 A4 9-15 M8 x 30 Tx 40 50
Typ SK M10 x 30 0904 810 130 A4 8-11 M10 x 30 Innen 6-kt. 6mm 25
Typ SK M12 x 35 0904 812 130 A4 9-14 M12 x 35 Innen 6-kt. 8mm 20
Through fastening
++ +
Ty p e B
Pre fastening
Ty p e S Ty p e S K Ty p e B
0904 706 150 0904 708 150 0904 710 150 0904 712 150
washer 1)
ETA-02/0017)
Through fastening
+
rete surface)
0904 706 050 0904 708 050 0904 710 050 0904 712 050
approval-conformant setting tools (anchor system). specified in the approval ETA-02/0017 (Appendix 5, Table 3)
n bolts, countersunk head screws, washers, countersunk(material quality, dimensions, mechanical properties according
ashers and nuts are specially coated and only to EN 10204:2004) are met.
permissible
r system in accordance with ETA-02/0017. Therefore,l The torque necessary for anchoring can be applied with Würth
rder separately at the same time torque
1) (see wrenches and suitable attachments (insertion open-end
product
on, Page 3). wrench).
n threaded rods 2 ) may only be used if the conditions
d in the approval ETA-02/0017 (Appendix 5, Table 3)2. Advantages
l quality, dimensions, mechanical properties according
l High loads, small axle bases and edge clearances
es, brackets, foot
0204:2004) areplates,
met. supports, l All screws/bolts available in the product line (see product information, Page 3) can be used
ms, stadium seats, etc.
ue necessary for anchoring can be applied for both cotter-pin and through-bolt mounting
with Würth
used in reinforced or non-reinforced l Can be loaded immediately – no wait time
wrenches andC50/60
5 and at most suitableinattachments
accordance (insertion open-end
l Fixed anchor cone with patented plastic coating facilitates reliable later expansion
l Elegant appearance thanks to countersunk head screws for visible fastening with
ed concrete (concrete tensile zone) simultaneous high load-bearing capacity (e.g. railings)
antages
e)
ural stone (without app roval)
l Also suitable for temporary fastening (cotter-pin mounting, e.g. stadium seats for flexible
use – flush with surface without danger of injury)
small axle (e.g.
atic loads basesown andweight,
edge clearances l Reliable installation due to application of prescribed torque
.olts available
façades, in the product line (see product information, Page 3) can be used
railings)
er-pin and through-bolt mounting
ndoor rooms, outdoors
ded
oomsimmediately
(including
– no waitaggressive
if no especially time con- 3. Properties 13
r cone with patented plastic coating facilitates reliable later expansion
l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
an be used under especially head screws for visible
earance thanks to countersunk fastening with
M8, M10 and M12
sg.high load-bearing
continuous, capacity
alternating (e.g. railings)
immersion in
e for temporary fastening (cotter-pin mounting, e.g. l Stainless steel A4
stadium seats for and HCR highly corrosion resistant steel, M6 – M12:
flexible
W-FA/S, W-FA/F
FIXANCHOR W-FA/S, W-FA/F
W-FA/S Approved for:
Concrete C20/25 to C50/60
Benefits:
•With a few blows the anchor is easy and fast to
W-FA/F install.
•The long thread allows levelling of unevenness and
can be used to assemble stand-off fixations.
• Two approved anchorage depth broaden the
application spectrum.
• Its approval guarantees the safe function even
Machine Setting Tool under highest load requirements.
Art. No. 0904 908 016
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Suitable for Non-cracked concrete
Metal structures, metal profiles, brackets, foot plates, supports,
cable conduits, piping, wooden structures, beams, purlins
Thread size M6 M6 M8 M8 M10 M10 M12 M12 M16 M16 M20 M20
Effective
hef [mm] 30 40 35 44 42 48 50 65 64 82 78 100
anchorage depth
Non-cracked concrete
Tensile C20/25 Nrec [kN] 2.9 4.1 5.0 5.7 6.5 7.6 8.5 12.6 12.3 17.9 16.6 24.0
C50/60 Nrec [kN] 4.1 4.1 7.3 7.3 10.1 11.8 13.2 16.7 19.1 27.7 25.7 37.3
Shear ≥ C20/25 Vrec [kN] 2.9 2.9 5.0 6.3 6.5 8.0 8.5 14.3 24.6 25.1 33.1 37.1
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
14
W-FA/S, W-FA/F
Min. drill
Article description Art. No. Drill dia. Anchor Fixture Thread Wrench PU
hole depth
Length thickness Size size
for through
fastening
do h2 l tfix/tfix,red ØxlG SW
mm mm mm mm mm Qty.
15
W-FA/S, W-FA/F
16
W-FA/A4, W-FA/HCR
FIXANCHOR W-FA/A4, W-FA/HCR Approved for:
Concrete C20/25 to C50/60
W-FA/A4
Applications:
Technical Data:
Thread size M6 M6 M8 M8 M10 M10 M12 M12 M16 M16 M20 M20
36 17
W-FA/A4, W-FA/HCR
W-FA/A4, W-FA/HCR
Art. No. Drill dia. Min. drill Anchor Thread Wrench PU
Article description hole depth Length thickness Size size
for through
fastening W-FAZ-IG/A4
do h2 l t /t 02.8G
W-FAZ-IG/HCR
SW
mm mm mm mm mm Fixing Anchor
Qty.
W-FA/A4 M6-5/40
with Female Thread
0904 411 061 6 35 40 5 M6 x 16 10
(W-FAZ-IG/HCR – Highly 100 corrosion-resistant steel –
available on special order)
W-FA/A4 M6-10-20/67 0904 411 065 6 62 67 10 / 20 M6 x 30 10 100
Individual attachment:
W-FA/A4 M6-25-35/82 0904 411 066 6 77 82 25 / 35 M6 x 35 W-FAZ-IG/A4
Uncracked and cracked100
10 concrete
02
W-FAZ-IG/A4 Type S – A4 stainless steel
W-FA/A4 M6-40-50/97
W-FA/A4 M8-10-19/75
0904 411 067
0904 411 083
6
8
92 97 40 / 50 M6(coated
x 35hexagon bolt
M8(coated
10
.8 Type SK – A4 stainless steel
x 40countersunk
and washer 1)
W-FAZ-IG/HCR
100
100
70 75 10 / 19 W-FAZ-IG/A4 13
W-FA/A4 M8-15-24/80 0904 411 084 8 75 80 15 / 24 M8W-FAZ-IG/A4
x 45 Type13 B
Fixing Anchor
head screw and countersunk head washer 1)
100
– A4 stainless steel
W-FA/A4 M8-30-39/95 0904 411 087 8 90 95 30 / 39
(hexagon bolt and washer 1)
M8(common
x 60 threaded 13 with Female Thread
rod 2) in accordance with 100 App roval ETA-02/0017
W-FA/A4 M8-55-64/120 0904 411 089 8 115 120 55 / 64 M8Setting
x 85 tool – (W-FAZ-IG/HCR
13
cotter-pin mounting – Highly corrosion-resistant steel –
100
(setting tool mustavailable on special
leave behind order)
a visible marking on concrete surface)
W-FA/A4 M10-10-16/85 0904 411 002 10 80 85 10 / 16 M10 x 40
Setting 17 attachment:
tool – Individual
through-bolt mounting 50
Uncracked
(stop of setting tool must restand cracked concrete
on attached part)
W-FA/A4 M10-15-21/90 0904 411 003 10 85 90 15 / 21 M10 x 45
W-FAZ-IG/A4 Type S 17 – A4 stainless steel 50
For W-FAZ-IG/S
(coated Fixing Anchor,
washer see 02.7
x hexagon
50 bolt and
1)
W-FA/A4 M10-20-26/95 0904 411 004 10 90 95 20 / 26 M10 17 50
W-FAZ-IG/A4 Type SK – A4 stainless steel
W-FA/A4 M10-30-36/105 0904 411 005 10 100 105 30 / 36 M10 Proof
(coated 60 of Performance
x countersunk 17screw and countersunk
head 50head washer 1)
W-FAZ-IG/A4 Type B – A4 stainless steel
W-FA/A4 M10-45-51/120 0904 411 006 10 115 120 45 / 51 M10 x 75
(hexagon bolt and washer )17 1 50
(common threaded rod 2)Approvalsin accordance with App roval ETA-02/0017) T
W-FA/A4 M12-15-30/110 0904 411 204 12 105 110 15 / 30 M12 x 65 19 25
Setting tool – cotter-pin mounting
W-FA/A4 M12-30-45/125 0904 411 206 12 120 125 30 / 45 M12
(settingxtool
80 must leave19
European behind a visible marking25 on concrete surface)
Fire
Setting tool – through-bolt mounting
W-FA/A4 M12-85-100/180 0904 411 209 12 175 180 85 / 100 M12 x Technical
80
(stop of setting tool must19 Resistance
rest on attached part) 25
W-FA/A4 M12-105-120/200 0904 411 210 12 195 200 105 / 120 M12 x Approval
80 Fixing19
For W-FAZ-IG/S Anchor, see
Technical Report
25
02.7 TR020
D
Option 1
W-FA/A4 M16-30-48/150 0904 411 604 16 145 150 30 / 46 M16 x for 90cracked and 24 R3020 – R120 (
W-FA/A4 M16-100-118/220 0904 411 607 16
Proof80of Performance
M16 xuncracked concrete (contained in ETA)
10
215 220 100 / 116 24
W-FA/A4 M20-35-57/180 0904 412 002 20 175 180 35 / 57 M20 x 70 30 10
Approvals Tes
European Fire
Technical Resistance Re
W-FA/HCR M6-10/57 On demand 6 52 57 – / 10 M61.x Approval
20
Applications 10 100
Technical Report Dire
W-FA/HCR M6-10-20/67 On demand 6 62 67 10 / 20 M6ll Can
x 20 be used for
Option 10 to heavy
1 medium 100
loadsTR020
Suitable for attaching:
for cracked and R30 – R120
Metal structures, (ET
metal profiles, brackets,
W-FA/HCR M6-25-35/82 On demand 6 77 82 25 / 35 M6l uncracked
xWith20European
cable conduits, 10
piping,
concrete
railings, wooden 100
structures,
(contained beams, stadium se
in ETA)
technical app roval, the anchor may be used in reinfo
W-FA/HCR M6-40-50/97 On demand 6 92 97 40 / 50 M6 with
x 20
standard of a strength class of at100
concrete 10
EN 206:2000-12
least C20/25 and at most
l Anchorage with European technical app roval in cracked concrete
and in uncracked concrete (concrete pressure zone)
l For use in concrete < C20/25 and pressure-resistant natural stone (w
l The anchor may be used for anchorage with primarily static loads (e.
installations, support materials) or quasi-static loads (e.g. façades, rai
l W-FAZ-IG/A4 (A4 stainless steel) may be used in dry indoor rooms,
1. Applications industrial atmosphere and near the sea) or in humid rooms if no
l Can ditions
be usedexistfor medium to heavy loads
l W-FAZ-IG/HCR (HCR highly corrosion-resistant steel) can be used
l Suitable for attaching: Metal structures, metal profiles, brackets, foo
aggressive
cable conduits,conditions
piping, railings,. These
wooden conditions include,
structures, e.g.
beams, continuous
stadium seats
l WithseaEuropean
water or technical
in the splash
apparea of the
roval, seaanchor
water, atmosphere
may be usedcontaining
in reinforcec
or atmosphere
standard concrete with
of a extreme
strength chemical
class of atcontamination
least C20/25 and at most C5
with EN 206:2000-12
l Anchorage with European technical app roval in cracked concrete
and in uncracked concrete (concrete pressure zone)
l For use in concrete < C20/25 and pressure-resistant natural stone (witho
l The anchor may be used for anchorage with primarily static loads (e.g. o
installations, support materials) or quasi-static loads (e.g. façades, railing
l W-FAZ-IG/A4 (A4 stainless steel) may be used in dry indoor rooms, out
industrial atmosphere and near the sea) or in humid rooms if no es
Setting
ditions exist Instructions
l W-FAZ-IG/HCR (HCR highly corrosion-resistant steel) can be used und
Cotter-pin mounting
aggressive conditions . These conditions include, e.g. continuous, al
sea water or in the splash area of sea water, atmosphere containing chlo
or atmosphere with extreme chemical contamination
MWF - 07/09 - 12076 - © •
Setting Instructions
Drill hole Clean drilled Knock in anch
Cotter-pin mountinghole with setting to
- 07/09 - 12076 - © •
37
18 Drill hole Clean drilled
hole
Knock in anchor
with setting tool
W-FA-IG/A4, W-FA-IG/HCR
FIXANCHOR W-FAZ-IG/A4, W-FAZ-IG/HCR Approved for:
Concrete C20/25 to C50/60
Cotter-pin installation Through-bolt mounting
Benefits:
• Immediately loadable – no waiting time.
+ + • Also suitable for temporary fastening
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B (pre fastening, e.g. stadium seats for flexible
– use- flush with surface without danger of injury)
2.3.Advantages
Properties
outdoors (including
o especially aggressive con-
l l Force-controlled/torque-controlled
High loads, small axle bases and edgespreading clearances anchor of A4 stainless steel in the sizes M6,
otunder especially
plates, supports, l All M8, M10 andavailable
screws/bolts M12 in the product line (see product information, Page 3) can be used
s,s, alternating
etc. immersion in l Stainless
for steel A4
both cotter-pin andand HCR highly
through-bolt corrosion resistant steel, M6 – M12:
mounting
chlorine in indoor pools
ed or non-reinforced l CanETA-02/0017 for individual
be loaded immediately fastening
– no (Option 1, uncracked and cracked concrete)
wait time
50/60 in accordance l l Dimensioned
Fixed anchor cone in accordance
with patentedwith the “European
plastic Technical
coating facilitates App later
reliable roval Guideline (ETAG) for
expansion
l Metal Anchors for Anchoring in Concrete”,
Elegant appearance thanks to countersunk head Partscrews
2 (ETAG 001-2)fastening with
for visible
(concrete tensile zone) l Fire resistance
simultaneous high(anchoring
load-bearing base: concrete
capacity (e.g.C20/25
railings)to C50/60):
l AlsoR30, R60,for
suitable R90, R120: fastening
temporary Technical(cotter-pin
Report TRmounting,
020 “Assessment of anchoring
e.g. stadium seats for in concrete
flexible
out app roval) usewith regard
– flush withtosurface
the firewithout
resistance” (included
danger in ETA-02/0017)
of injury)
own weight, l F30, F60, F90, F120 (W-FAZ-IG/A4): Fire stress
Reliable installation due to application of prescribed torque pursuant to DIN 4201-2:1977-09
gs) (ETK – Einheitstemperaturkurve (uniform temperature curve))
tdoors (including
specially aggressive con- 3. Properties
l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
der especiallyMetal structures, metaland profiles,
M8,Through-bolt
M10 M12 mounting brackets, foot plates, supports,
lternating immersion in l Stainless steel A4 and HCR highly corrosion resistant steel, M6 – M12:
orine in indoorcable
pools conduits, piping,forwooden
ETA-02/0017 structures,
individual fastening (Optionbeams, stadium,
1, uncracked and crackedseats.
concrete)
l Dimensioned in accordance with the “European Technical App roval Guideline (ETAG) for
Metal Anchors for Anchoring in Concrete”, Part 2 (ETAG 001-2)
l Fire resistance (anchoring base: concrete C20/25 to C50/60):
R30, R60, R90, R120: Technical Report TR 020 “Assessment of anchoring in concrete
Installation: with regard to the fire resistance” (included in ETA-02/0017)
F30, F60, F90, F120 (W-FAZ-IG/A4): Fire stress pursuant to DIN 4201-2:1977-09
(ETK – Einheitstemperaturkurve (uniform temperature curve))
Flush Installation
hor Apply torque Drill hole Clean drilled Knock in anchor Apply torque
ool Through-bolt mounting
hole with setting tool
Apply torque Drill hole Clean drilled Knock in anchor Apply torque 19
1
hole with setting tool
W-FA-IG/A4, W-FA-IG/HCR
Article description Art. No. Drill dia. Min. drill hole Anchor Fixture Fixture Thread
depth length thickness thickness size PU
Typ S Typ SK
tfix ØxlG SW
mm mm Qty.
tfix ØxlG SW
mm mm Qty.
Typ SK M6 x 25 0904 806 130 A4 6-14 M6 x 25 Tx 30 100
Typ SK M8 x 30 0904 808 130 A4 9-15 M8 x 30 Tx 40 50
Typ SK M10 x 30 0904 810 130 A4 8-11 M10 x 30 Innen 6-kt. 6mm 25
A4 Cotter-pin
Typ SK M12 0904 812 130
x 35 installation Through-bolt
A4 mounting9-14 M12 x 35 Innen 6-kt. 8mm 20
HCR
or Setting Tool + +
Thread Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B
osion-resistant steel –
Anchor diameter M6 M8 M10 M12
te
+ +
head washer 1)
0904 706 150 0904 708 150 0904 710 150 0904 712 150
roval ETA-02/0017)
n concrete surface)
Galvanized steel
Proof of performance
Approvals
Good to know:
European Technical Fire resistance
Approval The nail anchor combines the advantages of an anchor
Technical Report bolt with simple installation, since the nail anchor is
Multiple attachment
TR 020
of non-load-bearing systems
R30 – R120 knocked into the bore hole only by the attached part.
in concrete
The nail anchor may be used in reinforced or non-rein-
forced standard concrete from minimum strength class
C12/15 to maximum C50/60.
2. Advantages
• Quick and simple installation
• Pass-through mounting
• Not much drilling required, thanks to a reduced anchoring depth
of 25 mm
• Small edge clearances and axle bases possible
Setting instructions
MWF - 07/14 - 19324 - ©
Drill the hole Clean the drilled Push the W-NA-K Knock in the W-NA-K until
hole through the compo- it is �ush
nent and knock it in
21
164
NAILANCHOR
NAIL ANCHORW-NA-K
W-NA-K
35.11
35.
Performance data
Anchor diameter [mm] 6 (hef [mm] = 25) 6 (hef [mm] = 30)
Fperm [kN]3)
Multiple attachment of non-load- 1.4 1.9
� C12/15
bearing systems in concrete
(for all load directions) Fperm [kN]3)
for c � 100 mm and s � 200 mm � C20/25 and 2.1 2.8
� C50/601)
Fperm [kN]3)
Multiple attachment of non-load- 0.7 0.9
� C12/15
bearing systems in concrete
(for all load directions) Fperm [kN]3)
for c � 50 mm and s � 100 mm � C20/25 and 0.9 1.2
� C50/601)
Perm. loading under �re load R30; Fperm [kN]2) 0.6 0.9
(Technical Report TR 020) R60; Fperm [kN]2) 0.6 0.8
Axial and edge spacing, see
European Technical Approval R90; Fperm [kN]2) 0.6 0.6
ETA-11/0339 R120; Fperm [kN]2) 0.5 0.5
Permissible bending torque Mperm [Nm] 7.3 7.3
Characteristic values
Minimum component thickness hmin [mm] 80 80
E�ective anchoring depth hef [mm] 25 30
Nom. drill dia.3) d0 [in mm] 6 6
Drill cutting dia.3) dcut � [mm] 6.4 6.4
Drill hole depth h0 � [mm] 35 40
Through-hole in the component being
df � [mm] 7 7
connected
Anchor dimensions
Attachment height hef = 30 t�x [mm] 0 5 30 50
Attachment height hef = 25 t�x, red [mm] 5 10 35 55
Nail Anchor W-NA-K 6
Art. No. 0905 361 005 0905 361 010 0905 361 035 0905 361 055
Galvanized steel
Packing unit P. Qty. 200 200 200 100
1)The part safety coe�cients of the resistances regulated in the 3) The carbide impact drills must meet the speci�cations of the
MWF - 06/14 - 19325 - ©
approval and a part safety coe�cient of the e�ects of �F = 1.4 code of practice of the German Institute of Building Technology
Würth System Components have been taken into account. For the combination of tensile and (Deutsches Institut für Bautechnik) and of the Tool Industry Trade
transverse loads, for edge in�uence and anchor groups, please Association (Fachverband Werkzeugindustrie e.V.) with regard to
refer to the Guideline for European Technical Approval (ETAG), the "characteristic values, requirements and tests of masonry drills
Appendix C. with carbide cutters used to drill holes for anchor installation".
2) The part safety coe�cients for the load-bearing capacity under Würth hammer drills correspond to the speci�cations of the code
a �re load of �M,� = 1.0 and the part safety coe�cient of the of practice.
e�ects of �F = 1.0 recommended in the approval are taken into
account.
22
165
NAILANCHOR
NAIL ANCHORW-NA-K/A4
W-NA-K/A4
35.11
35.
Stainless steel A4
Proof of performance
Approvals
Good to know:
European Technical Fire resistance
Approval The nail anchor combines the advantages of an anchor
Technical Report bolt with simple installation, since the nail anchor is
Multiple attachment
TR 020
of non-load-bearing systems
R30 – R120 knocked into the bore hole only by the attached part.
in concrete
The nail anchor may be used in reinforced or non-rein-
forced standard concrete from minimum strength class
C12/15 to maximum C50/60.
The nail anchor W-NA-K/A4 is �re-tested in accordance
with the ZTV tunnel �re curve in the cracked tensile
zone.
1. Applications
• Multiple attachment of non-load-bearing systems: • Easy setting: Just knock it in
Anchoring with European Technical Approval in cracked concrete • No special drilling or setting tools required
(concrete tensile zone) and in uncracked concrete (concrete
pressure zone) 3. Features
• Suitable for securing: light ceiling coverings and joist • Load-controlled expanding peg: Expansion from the application
constructions, pipelines, cable channels, metal pro�les, of load
perforated metal tapes, wire suspension brackets, • Approval:
nonius hangers, wood moldings, wood laths, squared lumber etc. Multiple attachment of non-load-bearing systems in
• With European Technical Approval, the anchor may be used in concrete: European Technical Approval ETA-11/0339
reinforced or non-reinforced standard concrete of a strength class • Fire resistance:
of C12/15 minimum and C50/60 maximum in accordance with R30, R60, R90, R120 (anchorage base concrete C20/25 up
EN 206-1:2000-12. to C50/60): Technical Report TR 020 "Evaluation of
• W-NA-K/A4 (stainless steel A4) may be used outdoors Anchorage in Concrete with Regard to Fire Resistance”
(including industrial atmosphere and near the sea) or in damp (contained in ETA-11/0339)
rooms
2. Advantages
• Quick and simple installation
• Pass-through mounting
• Small edge clearances and axle bases possible
• Elegant and visually attractive
Setting instructions
MWF - 07/14 - 19326 - ©
Drill the hole Clean the drilled Push the W-NA-K Knock in the W-NA-K until
hole through the compo- it is �ush
nent and knock it in
23
166
NAILANCHOR
NAIL ANCHORW-NA-K/A4
W-NA-K/A4
35.11
35.
Performance data
Anchor diameter [mm] 6 (hef [mm] = 30)
Fperm [kN]
Multiple attachment of non-load- 1.9
� C12/15
bearing systems in concrete
(for all load directions) Fperm [kN]
for c � 100 mm and s � 200 mm � C20/25 and 2.8
� C50/601)
Fperm [kN]
Multiple attachment of non-load- 0.9
� C12/15
bearing systems in concrete
(for all load directions) Fperm [kN]
for c � 50 mm and s � 100 mm � C20/25 and 1.2
� C50/601)
Perm. loading under �re load R30; Fperm [kN]2) 0.9
(Technical Report TR 020) R60; Fperm [kN]2) 0.9
Axial and edge spacing, see
European Technical Approval R90; Fperm [kN]2) 0.9
ETA-11/0339 R120; Fperm [kN]2) 0.7
Permissible bending torque Mperm [Nm] 7.7
Characteristic values
Minimum component thickness hmin [mm] 80
E�ective anchoring depth hef [mm] 30
Nom. drill dia.3) d0 [in mm] 6
Drill cutting dia.3) dcut � [mm] 6.4
Drill hole depth h0 � [mm] 40
Through-hole in the component being
df � [mm] 7
connected
Anchor dimensions
Attachment height hef = 30 t�x [mm] 5 30
Nail Anchor W-NA-K/A4 Art. No. 0905 371 005 0905 371 030
Packing unit P. Qty. 200 200
Fire test in acc. with the ZTV tunnel �re curve in the cracked tensile zone
Based on the test result, the following permissible load per anchor can be speci�ed for the nail anchor W-NA-K/A4 under primarily static load in reinforced or
non-reinforced standard concrete with a strength class of C12/15 minimum and C50/60 maximum in accordance with EN 206-1: 2000-12, given a �re load
in line with the ZVT-ING temperature time curve:
Maximum loading under a �re load in acc. with the "Tunnel Fire Compartment Curve"
Designation as per ZTV-ING
max. F [kN]
Nail Anchor W-NA-K/A4 0.12
1. When designing the fastening materials, it is necessary to check whether the permissible loads as de�ned by ETA-11/0339 are de�nitive
2. This assessment applies only to the nail anchor W-NA-K/A4, taking into account the regulations of the European Technical Approval ETA-11/0339 with
setting depths hef of at least 30 mm
3. The assessment for the nail anchor W-NA-K/A4 applies only in conjunction with reinforced concrete ceilings, the design of which conforms to the regulations
of ZVT-ING, Part 5 Tunnel Construction for "�re protection measures for construction" or has passed a �re test with a �re load in line with the ZTV-ING tem
perature time curve
1) The part safety coe�cients of the resistances regulated in the 3) The carbide impact drills must meet the speci�cations of the
MWF - 07/14 - 19327 - ©
approval and a part safety coe�cient of the e�ects of �F = 1.4 code of practice of the German Institute of Building Technology
Würth System Components have been taken into account. For the combination of tensile and (Deutsches Institut für Bautechnik) and of the Tool Industry Trade
transverse loads, for edge in�uence and anchor groups, please Association (Fachverband Werkzeugindustrie e.V.) with regard to
refer to the Guideline for European Technical Approval (ETAG), the "characteristic values, requirements and tests of masonry drills
Appendix C. with carbide cutters used to drill holes for anchor installation".
2) The part safety coe�cients for the load-bearing capacity under Würth hammer drills correspond to the speci�cations of the code
a �re load of �M,� = 1.0 and the part safety coe�cient of the of practice.
e�ects of �F = 1.0 recommended in the approval are taken into
account.
24
167
NAILANCHOR
NAIL ANCHORW-NA-K/HCR
W-NA-K/HCR
35.11
35.
Proof of performance
Approvals
Good to know:
European Technical Fire resistance
Approval The nail anchor combines the advantages of an anchor
Technical Report bolt with simple installation, since the nail anchor is
Multiple attachment of
TR 020
non-load-bearing systems in
R30 – R120 knocked into the bore hole only by the attached part.
concrete
The nail anchor may be used in reinforced or non-rein-
forced standard concrete from minimum strength class
C12/15 to maximum C50/60.
The nail anchor W-NA-K/HCR is �re-tested in accordance
with the ZTV tunnel �re curve in the cracked tensile
zone.
S-24 cannot be ordered!
1. Applications
• Multiple attachment of non-load-bearing systems:
Anchoring with European Technical Approval in cracked concrete
(concrete tensile zone) and in uncracked concrete (concrete • Elegant and visually attractive
pressure zone) • Easy setting: Just knock it in
• Suitable for securing: light ceiling coverings and joist • No special drilling or setting tools required
constructions, pipelines, cable channels, metal pro�les,
perforated metal tapes, wire suspension brackets, nonius 3. Features
hangers, wood moldings, wood laths, squared lumber etc. • Load-controlled expanding peg: Expansion from the application
• With European Technical Approval, the anchor may be used in of load
reinforced or non-reinforced standard concrete of a strength class • Approval:
of C12/15 minimum and C50/60 maximum in accordance with Multiple attachment of non-load-bearing systems in
EN 206-1:2000-12. concrete: European Technical Approval ETA-11/0339
• W-NA-K/HCR (highly corrosion-resistant steel HCR) may be • Fire resistance:
used in areas with very high corrosion loading (e.g. indoor pool R30, R60, R90, R120 (anchorage base concrete C20/25 up
atmosphere, road tunnels, poorly ventilated car parks or parts in to C50/60): Technical Report TR 020 "Evaluation of
seawater and in marine atmosphere) Anchorage in Concrete with Regard to Fire Resistance”
(contained in ETA-11/0339)
2. Advantages
• Quick and simple installation
• Pass-through mounting
• Small edge clearances and axle bases possible
Setting instructions
MWF - 07/14 - 19328 - ©
Drill the hole Clean the drilled Push the W-NA-K Knock in the W-NA-K until
hole through the compo- it is �ush
nent and knock it in
25
168
NAILANCHOR
NAIL ANCHORW-NA-K/HCR
W-NA-K/HCR
35.11
35.
Performance data
Anchor diameter [mm] 6 (hef [mm] = 30)
Fperm [kN]
Multiple attachment of non-load- 1.9
� C12/15
bearing systems in concrete
(for all load directions) Fperm [kN]
for c � 100 mm and s � 200 mm � C20/25 and 2.8
� C50/601)
Fperm [kN]
Multiple attachment of non-load- 0.9
� C12/15
bearing systems in concrete
(for all load directions) Fperm [kN]
for c � 50 mm and s � 100 mm � C20/25 and 1.2
� C50/601)
Perm. loading under �re load R30; Fperm [kN]2) 0.9
(Technical Report TR 020) R60; Fperm [kN]2) 0.9
Axial and edge spacing, see
European Technical Approval R90; Fperm [kN]2) 0.9
ETA-11/0339 R120; Fperm [kN]2) 0.7
Permissible bending torque Mperm [Nm] 7.7
Characteristic values
Minimum component thickness hmin [mm] 80
E�ective anchoring depth hef [mm] 30
Nom. drill dia.3) d0 [in mm] 6
Drill cutting dia.3) dcut � [mm] 6.4
Drill hole depth h0 � [mm] 40
Through-hole in the component being
df � [mm] 7
connected
Anchor dimensions
Attachment height hef = 30 t�x [mm] 5 30
Nail anchor W-NA-K/HCR Art. No. 0905 381 005 0905 381 030
Packing unit P.Qty. 200 200
Fire test in acc. with the ZTV tunnel �re curve in the cracked tensile zone
Based on the test result, the following permissible load per anchor can be speci�ed for the nail anchor W-NA-K/HCR under primarily static load in reinforced
or non-reinforced standard concrete with a strength class of C12/15 minimum and C50/60 maximum in accordance with EN 206-1: 2000-12, given a �re
load in line with the ZVT-ING temperature time curve:
Maximum loading under a �re load in acc. with the "Tunnel Fire Compartment Curve"
Designation as per ZTV-ING
max. F [kN]
NAIL ANCHOR W-NA-K/HCR 0.12
1. When designing the fastening materials, it is necessary to check whether the permissible loads as de�ned by ETA-11/0339 are de�nitive
2. This assessment applies only to the nail anchor W-NA-K/HCR, taking into account the regulations of the European Technical Approval ETA-11/0339 with
setting depths hef of at least 30 mm
3. The assessment for the nail anchor W-NA-K/HCR applies only in conjunction with reinforced concrete ceilings, the design of which conforms to the regu
lations of ZVT-ING, Part 5 Tunnel Construction for "�re protection measures for construction" or has passed a �re test with a �re load in line with the ZTV-ING
temperature time curve
1) The part safety coe�cient of the resistances regulated in the 3) The carbide impact drills must meet the speci�cations of the
MWF - 07/14 - 19329 - ©
approval and a part safety coe�cient of the e�ects of �F = 1.4 code of practice of the German Institute of Building Technology
Würth System Components have been taken into account. For the combination of tensile (Deutsches Institut für Bautechnik) and of the Tool Industry
and transverse loads, for edge in�uence and anchor groups, Trade Association (Fachverband Werkzeugindustrie e.V.) with
please refer to the Guideline for European Technical Approval regard to the "characteristic values, requirements and tests of
(ETAG), Appendix C. masonry drills with carbide cutters used to drill holes for anchor
2) The part safety coe�cients for the load-bearing capacity under installation". Würth hammer drills correspond to the speci�ca-
a �re load of �M,� = 1.0 and the part safety coe�cient of the tions of the code of practice.
e�ects of �F = 1.0 recommended in the approval are taken into
account.
26
169
W-BS
W-BSCONCRETE
ConCreteSCREW
SCreW
01.3
Individual attachment
in cracked and uncracked concrete
Multiple attachment
in concrete and prestressed concrete hollow slab
ceilings
Proof of performance
Approvals 2. Advantages:
European Technical European Technical Fire resistance Size 6–14 • High load-bearing capacities
Approval Approval
Technical Report • Small axial spacings and edge spacings thanks to very minor
Option 1 for cracked and Multiple attachment of TR 020
uncracked concrete non-load-bearing systems R30 – R120 spreading effect
• Very quick and easy installation
• No mounting torque required
• Can be loaded immediately – no waiting times
• Enable extremely flexible use due to three anchoring depths
(Size 6–14) and a broad range of types
1. Areas of use: • Same performance data for steel galvanized and stainless steel
• Individual attachment, Size 6–14: Normal concrete A4 version
C20/25 to C50/60 (cracked and uncracked concrete) • Adjustability of attachment possible up to twice following installa-
• Multiple attachment, Size 5 and 6: Anchoring non-load- tion (Size 8–14) in order, for example, to align railing or anchor
bearing systems in cracked and uncracked concrete plate (observe installation instructions in approval or enclosed
• Attachment in prestressed concrete hollow slab leaflet)
ceilings, Size 6
• Suitable for attachment of metal constructions, metal profiles, 3. Properties:
brackets, foot plates, supports, cable conduits, pipes, railings, • Approval
machines etc. ETA-16/0043 for individual attachment, Size 6–14
• Can also be used in concrete < C20/25 and pressure-resistant Option 1, cracked and uncracked concrete
natural stone (without approval) ETA-16/0128 for multiple attachment in concrete
• W-BS/S (galvanized steel) can be used in dry indoor rooms (Size 5 and 6) and attachment in prestressed con-
• W-BS/A4 (A4 stainless steel) may be used in dry indoor rooms, crete hollow slab ceilings (Size 6)
outdoors (including industrial atmosphere and near the sea) or in • Fire resistance: R30, R60, R90, R120; Technical Report TR020
humid rooms if no especially aggressive conditions exist (contained in the approvals)
Setting instructions
MWF - 06/16 - 19772 - ©
Produce the drill hole Clean the drill hole Position the anchor Screw in the anchor
27
W-BS
W-BSCONCRETE
ConCreteSCREW
SCreW
01.3
W-BS/S concrete screw, galvanized steel with hexagon head and pressed-on washer, Washer diameter:
Type S
Size Screw dia. [mm]
5 12.5
6 15
8 16
10 20
12 23
14 28
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Wrench Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] size [mm]
[mm] [mm] crete hnom [mm] dia d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
5 – – 40 5929 125 005
5 15 – – 50 35 – – 5 40 – – SW10 5929 125 015
25 – – 60 5929 125 025
5 – – 40 – – 5929 126 005
– – 100
15 10 – 50 5929 126 015
6 25 20 5 60 35 6 40 SW13 5929 126 025
40 45
45 40 25 80 55 60 5929 126 045
65 60 45 100 5929 126 065
5 – – 50 – – 5929 128 005
– –
15 5 – 60 5929 128 015
25 15 5 70 5929 128 025
35 25 15 80 5929 128 035
8 45 35 25 90 45 8 55 SW13 5929 128 045 50
55 65
55 45 35 100 65 75 5929 128 055
75 65 55 120 5929 128 075
95 85 75 140 5929 128 095
115 105 95 160 5929 128 115
5 – – 60 – – 5929 121 005
– –
25 5 – 80 5929 121 025
35 15 5 90 5929 121 035
10 45 25 15 100 55 10 65 SW15 5929 121 045
75 85
65 45 35 120 85 95 5929 121 065
85 65 55 140 5929 121 085
25
105 85 75 160 5929 121 105
15 – – 80 – – – – 5929 122 015
12 65 12 75 SW17
45 25 10 110 85 100 95 110 5929 122 045
5 – – 80 – – 5929 124 005
– –
14 35 10 – 110 75 14 85 SW21 5929 124 035
100 110
55 30 15 130 115 125 5929 124 055
MWF - 06/16 - 19773 - ©
28
W-BS
W-BSCONCRETE
ConCreteSCREW
SCreW
01.3
W-BS/S concrete screw, galvanized steel with hexagon head and large washer Washer diameter:
as per DIN 440, Type S
Size Screw dia. [mm]
10 44
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Wrench Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] size [mm]
[mm] [mm] crete hnom [mm] dia. d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
125 105 95 180 5929 121 125
25
145 125 115 200 5929 121 145
10 185 165 155 240 55 75 85 10 65 85 95 SW15 5929 121 185
225 205 195 280 5929 121 225 15
265 245 235 320 5929 121 265
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Torx drive Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] [mm]
[mm] [mm] crete hnom [mm] dia. d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
5 – – 40 5929 135 005
5 15 – – 50 35 – – 5 40 – – TX25 5929 135 015
25 – – 60 5929 135 025
5 – – 40 – – 5929 136 005
– – 100
15 10 – 50 5929 136 015
25 20 5 60 5929 136 025
45 40 25 80 5929 136 045
6 35 6 40 TX30
65 60 45 100 40 45 5929 136 065
55 60
85 80 65 120 5929 136 085
105 100 85 140 5929 136 105
50
125 120 105 160 5929 136 125
8 35 25 15 80 45 55 65 8 55 65 75 TX40 5929 138 035
10 35 15 5 90 55 75 85 10 65 85 95 TX50 5929 131 035 25
MWF - 06/16 - 19774 - ©
29
W-BS ConCrete SCreW
W-BS CONCRETE SCREW 01.3
Concrete screw W-BS/S, galvanized steel with pan head, Type P Head diameter:
Size Head dia. [mm]
5 14
6 15
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Torx drive Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] [mm]
[mm] [mm] crete hnom [mm] dia d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
5 – – 40 5929 145 005
5 15 – – 50 35 – – 5 40 – – TX30 5929 145 015
25 – – 60 5929 145 025
5 – – 40 – – 5929 146 005
– – 100
15 10 – 50 5929 146 015
6 25 20 5 60 35 6 40 TX30 5929 146 025
40 45
45 40 25 80 55 60 5929 146 045
65 60 45 100 5929 146 065
Concrete screw W-BS/S, galvanized steel with large pan head, Type P Head diameter:
Size Head dia. [mm]
6 18
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Torx drive Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] [mm]
[mm] [mm] crete hnom [mm] dia. d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
5 – – 40 – – – – 5929 156 005
6 35 6 40 TX30 100
25 20 5 60 40 55 45 60 5929 156 025
Concrete screw W-BS/S, galvanized steel with inside thread, Type I Stepped thread:
Size Stepped thread
6 M8/M10
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Wrench Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] size [mm]
[mm] [mm] crete hnom [mm] dia. d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
0 – – 35 35 – – 40 – – 5929 176 001
6 6 SW13 50
– – 0 55 – – 55 – – 60 5929 176 002
Concrete screw W-BS/S, galvanized steel with stud screw with countersunk head, Type ST Connecting thread:
Size Thread [mm]
6 M8 x 16
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Wrench Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] size [mm]
[mm] [mm] crete hnom [mm] dia. d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
MWF - 06/16 - 19775 - ©
30
W-BS
W-BSCONCRETE
ConCreteSCREW
SCreW
01.3
Concrete screw W-BS/A4, stainless steel A4 with countersunk head, Type SK Head diameter:
(90° countersunk head)
Size Head dia. [mm]
6 13
8 20
10 22
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Torx drive Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] [mm]
[mm] [mm] crete hnom [mm] dia d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
15 10 – 50 – – 5929 236 015
30 25 10 65 5929 236 030
6 35 40 6 40 45 TX30 100
50 45 30 85 55 60 5929 236 050
70 65 50 105 5929 236 070
8 35 25 15 80 45 55 65 8 55 65 75 TX40 5929 238 035 50
10 35 15 5 90 55 75 85 10 65 85 95 TX50 5929 231 035 25
Concrete screw W-BS/A4, stainless steel A4 with pan head, Type P Head diameter:
Size Head dia. [mm]
6 15
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Torx drive Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] [mm]
[mm] [mm] crete hnom [mm] dia d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
15 10 – 50 – – 5929 246 015
25 20 5 60 5929 246 025
6 35 40 6 40 45 TX30 100
45 40 25 80 55 60 5929 246 045
65 60 45 100 5929 246 065
MWF - 06/16 - 19776 - ©
31
W-BSCONCRETE
W-BS ConCreteSCREW
SCreW
01.3
Concrete screw W-BS/A4, stainless steel A4 with stud screw, Type ST Connecting thread:
Size Thread [mm]
8 M10 x 30
10 x 140 M12 x 20
10 x 160 M12 x 55
Anchor Attachment height Total Length of the Drill bit Drill hole depth h1 Wrench Art. No. P. Qty.
size tfix length L anchor in the con- nominal [mm] size [mm]
[mm] [mm] crete hnom [mm] dia d0
tfix 1 tfix 2 tfix 3 hnom1 hnom2 hnom3 [mm] H1.1 H1.2 H1.3
8 40 30 20 105 45 55 65 8 55 65 75 SW7 5929 268 040 50
60 40 30 140 5929 261 060
10 55 75 85 10 65 85 95 SW9 25
80 60 50 160 5929 261 080
32
W-HAZ/S
HIGH-PERFORMANCE ANCHOR W-HAZ/S Approved for:
Concrete C20/25 to C50/60
W-HAZ-B
Benefits:
• The bolt is attuned to the sleeve to make this anchor a
reliable specialist for highest shear load demands.
• Various head types allow tidy finishes and avoid risk
W-HAZ-S of injury when using for machine bases.
• The optimized combination of expansion sleeve and
cone bolt allow smallest spacing and thus small
cost-efficient anchor plates.
W-HAZ-SK
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Suitable for fastening metal constructions, metal profit Cracked
Suitable for concrete
less, brackets, foot plates, supports, cable conduits, pipes, Non-cracked concrete
railings, machines, etc.
Installation:
33
W-HAZ/S
Min. drill
Article description Art. No. Drill dia. hole depth Anchor Fixture Wrench PU
for through Length thickness Size
fastening
do h2 l tfix SW
mm mm mm mm Qty.
W-HAZ-B/S-0-M6x67 0905 210 101 10 65 67 0 10 100
W-HAZ-B/S-10-M6x77 0905 210 102 10 75 77 10 10 50
W-HAZ-B/S-30-M6x97 0905 210 103 10 95 97 30 10 50
W-HAZ-B/S-50-M6x117 0905 210 104 10 115 117 50 10 50
W-HAZ-B/S-100-M6x167 0905 210 105 10 165 167 100 10 25
W-HAZ-B/S-0-M8x80 0905 212 101 12 80 80 0 13 50
W-HAZ-B/S-10-M8x90 0905 212 102 12 90 90 10 13 50
W-HAZ-B/S-30-M8x110 0905 212 103 12 110 110 30 13 50
W-HAZ-B/S-50-M8x130 0905 212 104 12 130 130 50 13 25
W-HAZ-B/S-100-M8x180 0905 212 105 12 180 180 100 13 25
W-HAZ-B/S-0-M10x96 0905 215 101 15 95 96 0 17 25
W-HAZ-B/S-15-M10x111 0905 215 102 15 110 111 15 17 25
W-HAZ-B/S-25-M10x121 0905 215 103 15 120 121 25 17 25
W-HAZ-B/S-45-M10x141 0905 215 104 15 140 141 45 17 25
W-HAZ-B/S-95-M10x191 0905 215 105 15 190 191 95 17 25
W-HAZ-B/S-0-M12x112 0905 218 101 18 105 112 0 19 20
W-HAZ-B/S-10-M12x122 0905 218 102 18 115 122 10 19 20
W-HAZ-B/S-20-M12x132 0905 218 103 18 125 132 20 19 20
W-HAZ-B/S-40-M12x152 0905 218 104 18 145 152 40 19 20
W-HAZ-B/S-70-M12x182 0905 218 105 18 175 182 70 19 20
W-HAZ-B/S-100-M12x212 0905 218 106 18 205 212 100 19 10
W-HAZ-B/S-0-M16x137 0905 224 101 24 130 137 0 24 10
W-HAZ-B/S-20-M16x157 0905 224 102 24 115 157 20 24 10
W-HAZ-B/S-50-M16x187 0905 224 103 24 180 187 50 24 10
W-HAZ-B/S-100-M16x237 0905 224 104 24 230 237 100 24 5
W-HAZ-B/S-0-M16Lx152 0905 224 111 24 145 152 0 24 10
W-HAZ-B/S-30-M16Lx182 0905 224 113 24 175 182 30 24 10
W-HAZ-B/S-50-M16Lx202 0905 224 115 24 195 202 50 24 10
W-HAZ-B/S-10-M20x181 0905 228 101 28 170 181 10 30 10
W-HAZ-B/S-30-M20x201 0905 228 102 28 190 201 30 30 10
W-HAZ-B/S-60-M20x231 0905 228 103 28 220 231 60 30 5
W-HAZ-B/S-100-M20x271 0905 228 104 28 260 271 100 30 5
34
W-HAZ/S
Article description Drill dia. Min. drill
Art. No. Anchor Fixture Wrench PU
hole depth
Length thick- Size
for through
ness
fastening
do h2 l tfix SW
mm mm mm mm Qty.
35
W-HAZ/S
Min. drill Anchor Fixture Wrench
Article description Art. No. Drill dia. PU
hole depth Length thickness Size
for through
fastening
do h 2 l tfix SW
mm mm mm mm Qty.
36
W-HAZ/A4
HIGH-PERFORMANCE ANCHOR W-HAZ/A4
Approved for:
W-HAZ-B/A4 Concrete C20/25 to C50/60
Benefits:
• The bolt is attuned to the sleeve to make this anchor a
W-HAZ-S/A4 reliable specialist for highest shear load demands.
• Various head types allow tidy finishes and avoid risk
of injury when using for machine bases.
• The optimized combination of expansion sleeve and
cone bolt allow smallest spacing and thus small cost
efficient anchor plates.
W-HAZ-SK/A4
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, Outdoor
Material composition A4 stainless steel
Type of fastening Through-fastening
Suitable for Cracked concrete
Metal constructions, metal profiles, brackets, foot plates, supports, cable Non-cracked concrete
conduits, pipes, railings, machines, etc.
Installation:
37
W-HAZ/A4
Min. drill
Article description Art. No. Drill dia. Anchor Fixture Wrench PU
hole depth Size
Length thickness
for through
fastening
do h 2 l tfix SW
mm mm mm mm Qty.
W-HAZ-B/A4-10-M8x90 5932 612 102 12 90 90 10 13 50
W-HAZ-B/A4-30-M8x110 5932 612 103 12 110 110 30 13 50
W-HAZ-B/A4-15-M10x111 5932 615 102 15 110 111 15 17 25
W-HAZ-B/A4-25-M10x121 5932 615 103 15 120 121 25 17 25
W-HAZ-B/A4-20-M12x132 5932 618 103 18 125 132 20 19 20
38
W-ED/S
Approved for:
DROP-IN ANCHOR W-ED/S
Concrete C20/25 to C50/60
W-ED/S Benefits:
• Easy installation due to low drive-in energy
• Visual setting check and hand protection when
installing with markingspreading tool Can be loaded
immediately – no waiting time.
• Attachment can easily be demounted at any time.
W-ED/S-BND
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Pre fastening
Suitable for Non-cracked concrete
Cracked with
redundant fastening
Attaching threaded rods, metal structures, metal profiles, grids, cable conduits,
pipelines, mounting rails
Installation:
39
W-ED/S
40
W-ED/A4
DROP-IN ANCHOR W-ED/A4, W-ED/HCR Approved for:
Concrete C20/25 to C50/60
Benefits:
• Easy installation due to low drive-in energy.
• Visual setting check and hand protection when
installing with markingspreading tool Can be loaded
immediately – no waiting time.
• Attachment can easily be demounted at any time.
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions
Indoor, outdoor
Material composition A4 stainless steel / HCR
highly corrosion-resistant steel
Type of fastening Pre fastening
Non-cracked
Suitable for concrete
Cracked with redundant
fastening
Attaching threaded rods, metal structures, metal
profiles, grids, cable conduits, pipelines, mounting
rails
Range of loading:
Size M6 M8 M10 M12 M16 M20
hef [mm] 30 30 40 40 50 65 80
Non-cracked concrete
Nrec [kN] 3.3 3.3 3.6 6.1 8.5 12.6 17.2
Vrec [kN] 3.2 4.6 6.0 11.9 19.2 30.7
Installation:
41
W-ED/A4
Art. No. Min. Min.
Article description Drill dia. Min. Anchor PU
internal internal
drill hole Length thread thread
depth length length
do h2 l Lsd,min Lth
mm mm mm mm Qty.
W-ED/A4 M6 x 30 0904 030 06 8 30 30 7 13 100
W-ED/A4 M8 x 30 0904 030 08 10 30 30 9 13 100
W-ED/A4 M8 x 40 0904 030 081 10 40 40 9 20 100
W-ED/A4 M10 x 40 0904 030 10 12 40 40 11 15 50
W-ED/A4 M12 x 50 0904 030 12 15 50 50 13 18 50
W-ED/A4 M16 x 65 0904 030 16 20 65 65 18 23 25
W-ED/A4 M20 x 80 on demand 25 80 80 22 34 25
42
WSL-ED
WSL-ED DRIVE-IN ANCHOR
DRIVE-IN ANCHOR
WSL-ED Galvanized steel, M6–M16
Application:
• Can be used for medium to heavy loads.
• Suitable for uncracked concrete ≥ C20/25 and pressure-
resistant natural stone.
• Can be used in dry interior rooms.
• Suitable for all kind of metric connection (e.g. Threaded
attaching.)
Performance Data
Anchor Diameter M6 M8 M10 M12 M16
Safety Load 1) 2) Nrec [kN] 1.5 2.1 3.3 4.8 4.8 7.0
min. member thickness hmin [mm] 100 100 120 130 130 160
Axial spacing Scr, N [mm] 75 90 120 150 150 195
Edge spacing Ccr, [mm] 37.5 45 60 75 75 97.5
N
Embendment depth hef [mm] 25 30 40 50 50 65
Nominal diameter
d0 [mm] 8 10 12 16 15 20
of drill bit in mm
Drill hole depth h0 [mm] 25 30 40 50 50 65
Through-hole in the
df [mm] 7 9 12 14 14 18
comp. to be connected
Max torque Tinst [Nm] 4 8 15 35 35 60
Total Length LH [mm] 25 30 40 50 50 65
Available thread length Lth [mm] 10 14 15 20 20 25
Lth
Min screw-in depth Lsdmin [mm] 7 9 11 13 13 18
WSL-ED- WSL-ED- WSL-ED- WSL-ED- WSL-ED- WSL-ED-
Designation M6×25- M8×30- M10×40- M12×50- M12×50- M16×65-
D8 D10 D12 D16 D15 D20
Art. No. 5932 806 01 5932 808 01 5932 810 01 5932 812 01 5932 812 02 5932 816 01
Packing Qty Box/Ctn 100/2000 100/2000 50/1000 50/500 50/500 25/200
1) Tested in concrete C20/25.
2) Local regulations are not included. Please check with local engineers.
Setting instructions:
CC-2011-0580-150227 © •
Drill hole Clean drilled hole Knock in anchor Anchor with Secure component
spreading tool apply torque
43
BRASS ANCHOR
Proof of performance
Applications
• For secondary attachments inside and outside
• For the attachment of components to concrete and solid brick
• For spaced mounting in conjunction with a threaded rod
Advantages
• Minimal anchoring depth
• Minimum edge clearances and axle bases
• Suitable for through-bolt and cotter-pin mounting
• Can be used without a setting tool
• Economical attachment for outside
Properties
• Brass anchor with inside thread
• Knurled surface for secure hold
•S crewing in a screw/threaded rod with a metric thread causes the
anchor to expand and anchor itself in the attachment surface
• Corrosion-resistant
Setting instructions
Drill hole Clean drilled hole Drive in anchor until Mount component
flush
44
BRASS ANCHOR
Performance Data
Anchor size [mm] M4 M5 M6 M8 M10 M12 M14 M16
concrete >_ B25 0,45 1,00 1,40 1,90 2,50 3,45 3,75 3,90
recommended recommended
tension
solid brick F rec [kN] 0,40 0,70 1,10 1,40 1,65 2,00 3,00 3,25
load
sand-lime solid brick 0,40 0,75 1,20 1,50 1,75 2,40 3,30 3,50
concrete >_ B25 0,40 0,90 1,20 1,90 2,50 3,50 3,90 4,00
tension
Installation Parameters
Spacing a >_ [mm] 60 60 60 80 80 100 100 120
Edge distances a r >_ [mm] 40 50 60 80 80 100 100 120
Depth of the drill hole h 1 >_ [mm] 20 25 30 35 40 45 50 55
Setting depth h S >_ [mm] 16 20 25 30 35 40 42 44
minimum member thickness d >_ [mm] 40 50 60 70 80 100 150 150
thread diameter d [mm] 4 5 6 8 10 12 14 16
nominal diameter of drill bit d o [mm] 5 6 8 10 12 15 18 20
diameter of clearance hole in the fixture d f [mm] 4,5 5,5 6,5 8,5 10,5 13 15 18
Dimensions/Product range
Length of the anchor l [mm] 16 20 23 30 34 40 42 44
Designation Brass anchor Brass anchor Brass anchor Brass anchor Brass anchor Brass anchor Brass anchor Brass anchor
M4/5x16 M5/6x20 M6/8x25 M8/10x30 M10/12x35 M12/15x40 M14/18x42 M16/20x44
Brass anchor Art.-No. 0904 34 0904 35 0904 36 0904 38 0904 310 0904 312 0904 314 0904 316
45
W-HD
Benefits:
• Quick and easy installation - no special tools needed
• Can be loaded immediately – no waiting time
• Maximum flexibility
• Fast and easy installation
Approved for:
Applications:
W-HD
Hollow- Technical Data:
Head configuration Inner thread
Ceiling Environmental conditions Indoor, Outdoor
performance
als Test reports
l Suitable for attaching metal structures, metal profiles, cable
w Fire conduits, pipes, ventilation lines, suspended ceilings etc.
sed resistance Characteristic Values:
plate Technical Report
TR 020 2. Advantages
gs R30 - R120 l Screws or threaded rodsSize can be used M6 M8 M10 M12
l The anchor may also be mounted to the prestressed strand out-
2
side the hollow-space axis Drill
up todiameter
50 mm ‘ maximum d0 [mm]
flexibility 10 12 16 18
l Fastening to just about any Drill
parthole
of thedepth h0 [mm]
hollow plate ceiling 50 55 60 70
l Suitable for hollow spaces and solid zones of hollow pre-
Anchor length
stressed concrete plate ceilings hnom [mm] 40 45 53 58
l Q uick a nd ea sy insta lla tioThrough-hole
n – no specia l tools nin
eeded
tions l Can be loaded immediately – no wait time df ≤ [mm] 7 9 12 14
Anchor plate
stener for anchoring in hollow prestressed concrete
ngs 3. Properties Installation torque Tinst [Nm] 10 20 30 40
w ceiling anchor may be used in hollow prestressed l Anchoring in hollow prestressed concrete plate ceilings via
plate ceilings of strength class C50/60 pursuant to positive locking
06-1:2001-07 or B55 pursuant to DIN 1045:1988-07 l The cone is separated from Anchor Dimensions:
the expansion sleeve when the
neral construction permit screw or hex nut is tightened. Important:
– At least
or may be used as an individual anchor and as a mul- Sleeve
three screw/nut rotations are required. length By applying l (mm) 30 35 40 45
ner for the anchoring of light ceiling coverings and the installation torque, theScrewcone islength min lS [mm]
pulled into the expansion 42 + tfix 47 + tfix 55 + tfix 61 + tfix
tructions pursuant to DIN18168-1:1981-10 in hollow sleeve and expands it
ed concrete ceilings and for statically comparable l Anchoring in solid materialsThreaded
via frictionbolt length min lB [mm]
engaging 47 + tfix 53 + tfix 63 + tfix 71 + tfix
g up to 1.0 kN/m2 (the sleeve expa nds a ga inDesignation
st the wa ll of the drilled hole) W-HD M6 W-HD M8 W-HD M10 W-HD M12
g is only permissible in hollow prestressed concrete l G enera l construction permit Z-21.1-1832, dimensioning pur-
ngs with a hollow space width that does not exceed suant to permit Z-21.1-1832 W-HD Art. No 0905 120 601 0905 120 801 0905 120 001 0905 121 201
the web width (bH ≤ 4.2 x bSt) l Fire resistance (anchoring (Galvanised Steel) C50/60):
base: concrete
y be used in dry interior rooms, e. g. flats, offices, R30, R60, R90, R120: based on Technical Report TR 020
ospitals and sales rooms (Fire Protection Test ReportPacking Unit
No. (3526/3426)) P. Qty. 50 50 50 25
Installation:
ons
+
Create drill hole Set anchor in place Install add-on piece At least three rotations of the screw Apply installation torque Installed
Cone separates from sleeve
46
W-HD
Performance data
Size M6 M8 M10 M12
Web thickness du ≥ [mm] 25 30 40 50 25 30 40 50 25 30 40 50 25 30 40 50
Axial spacing scr≥ [mm] 300
Individual Anchors
Permissible load Fperm [kN] ≥ C45/55 0.7 0.9 2.0 2.9 0.7 0.9 2.0 3.6 0.9 1.2 3.0 3.6 1.0 1.2 3.0 4.3
oblique pull at every angle
Anchor pair
Permissible load Fperm [kN] ≥ C45/55 0.7 1.4 2.6 3.9 0.7 1.4 2.6 4.8 1.1 2.0 4.8 4.8 1.1 2.0 4.8 5.7
Tensile, transverse and oblique
47
HEAVY DUTY AnCHor
HeAVY-DUtY ANCHORWSL-tAM
WSL-TAM
15.1
Individual attachment:
Uncracked concrete
Galvanized steel
Proof of Performance
1. Applications 2. Advantages
• Can be used for medium and heavy load range •Minimal force needed when setting the anchor
•Suitable for fastening: •Can be loaded immediately – no waiting times
Transfer lines on the ground for which •No setting tools required
installation ush with the surface is speci ed; •Can be set ush with the surface: Attached parts can be removed/
steel structures, metal pro les, brackets, foot mounted again at any time
plates, cable conduits, piping, mounting rails, etc. •Even spreading e ect and load distribution due to triple expansion
•Can be used in < C20/25 concrete, pressure-resistant natural stone and sleeve
solid stone masonry (without approval) •Heavy-duty anchor Type A suitable for bolts and screws with metric
threads3)
• W-TAM may only be used under the conditions of dry interior rooms
•Reliable installation due to application of prescribed torque during
3. Features
anchoring
•Force controlled/torque controlled spreading anchor of
electrogalvanized steel in the sizes M6–M12
•Cotter-pin mounting
1) The concrete has normal reinforcement. Higher values are possible for higher concrete strengths.
Setting instructions
Drill hole Clean the borehole Knock in anchor Mount component Apply torque
48
HEAVY DUTY AnCHor
HeAVY-DUtY ANCHORWSL-tAM
WSL-TAM
15.1
Performance Data
Anchor diameter [mm] M6 M8 M10 M12
Perm. centered
of a single anchor
tensile load 1)
without edge
Pressure zone
Nperm [kN]
(uncracked concrete C20/251)), 3.6 4.1 5.4 9.5
= C20/251)
ef ef
Anchor Dimensions
Designation W-TAM M6 W-TAM M8 W-TAM M10 W-TAM M12
Thread dia. dthr [mm] 6 8 10 12
Nom. drill dia. d0 [mm] 10 12 14 18
Length of anchor l [mm] 45 51 60 75
Maximum fastening height t x max [mm] 150 200 250 300
Length of screw ls [mm] = Length of anchor + fastening height + any plaster/insulation thickness
Drilled hole depth h1 [mm] 55 61 70 85
Article number 1904 901 851 1904 901 852 1904 901 853
49
METAL FRAME-FIXING ANCHOR WUS 10
50
1904 410 72
1904 410 92
1904 410 112
1904 410 132
1904 410 152
1904 410 182
1904 410 202
METAL FRAME-FIXING ANCHOR WUS 10
51
W-VIZ/S and WIT-VM 100
Individual attachment:
Cracked and non-cracked concrete
Galvanised steel
Proof of performance
2. Benets
• Through-bolt and cotter-pin mounting
• Highest load-bearing capacity, low axial and edge clearance
• Shallow drilling hole depth with deep anchoring depth
• The drill holes can be produced by the hammer drilling process (M8 to M24)
and diamond drilling process (M10 to M24)
Produce drilled hole Check diameter of Clean drill hole (blow out Screw mixer onto Before use, press out Fill composite mortar Press in anchor rod Visual check of Comply with Mount component,
cleaning brushes 2 x, brush out mechanically cartridge approx. 10 cm cord. starting from base of up to drill hole base mortar lling hardening time of apply installation
2 x, blow out 2 x), with Do not use this initial drill hole while turning slightly quantity, setting composite mortar torque
M20 and larger, blow mortar! depth marking
out with compressed air
(compressed-air nozzle!)
52
W-VIZ/S and WIT-VM 100
Anchor characteristics
M8 M8 M10 M10 M12 M12 M12 M12 M12 M12
Anchor diameter [mm]
hef 40 hef 50 hef 60 hef 75 hef 70 hef 80 hef 95 hef 100 hef 110 hef 125
Minimum component thickness hmin ≥ [mm] 80 80 100 110/100 110
5) 110 130/125 130
5) 140 160
Minimal axis distance
smin ≥ [mm] 40 40 40 40 40 50 40 50 55 55 40 55 40 55 50 806) 50 806) 50 806)
cracked concrete non-cracked concrete
Minimal edge clearance
cmin ≥ [mm] 40 40 40 40 40 50 40 50 55 55 50 55 50 55 50 55 50 55 50 55
cracked concrete non-cracked concrete
Axial spacing scr,N [mm] 120 150 180 225 210 240 285 300 330 375
Edge spacing ccr,N [mm] 60 75 90 112.5 105 120 142.5 150 165 187.5
Effective anchoring depth hef ≥ [mm] 40 50 60 75 70 80 95 100 110 125
Nom. drill dia. d0 [mm] 10 10 12 12 14 14 14 14 14 14
Drill hole depth h0 ≥ [mm] 42 55 65 80 75 85 100 105 115 130
Through-hole in the component being connected
df ≤ [mm] 9 9 12 12 14 14 14 14 14 14
– cotter-pint mounting
Through-hole in the component being connected
df ≤ [mm] – – 14 14 16 16 16 16 16 16
– pass-through mounting7)
Installation torque Tinst = [Nm] 10 10 15 15 25 25 25 30 30 30
Cleaning brush dia. D ≥ [mm] 10.8 10.8 13.0 13.0 15.0 15.0 15.0 15.0 15.0 15.0
Performance data
M8 M8 M10 M10 M12 M12 M12 M12 M12 M12
Anchor diameter [mm]
hef 40 hef 50 hef 60 hef 75 hef 70 hef 80 hef 95 hef 100 hef 110 hef 125
50°C3) /
Tensile zone 4.3 6.1 8.0 11.1 10.0 12.3 15.9 17.1 19.8 24.0
80°C4)
(cracked concrete C20/252),
72°C3) /
Permissible central tensile
s ≥ 3 hef, c ≥ 1.5 hef) 2.4 3.6 5.7 5.7 7.6 9.5 9.5 14.3 14.3 14.3
120°C4)
without edge inuence
(cracked concrete C20/252), 8.0 8.0 12.0 12.0 19.4 19.4 19.4 19.4 19.4 19.4
transverse
load1)
(non-cracked concrete C20/252), 8.0 8.0 12.0 12.0 19.4 19.4 19.4 19.4 19.4 19.4
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 17.1 17.1 34.3 34.3 60 60 60 60 60 60
F30 [kN] – 3.0 7.0 – – 10.0 – 10.0 – –
F60 [kN] – 0.3 0.95 – – 2.8 – 2.8 – –
Fire resistance class
F90 [in kN] – – 0.3 – – 1.35 – 1.35 – –
F120 [kN] – – – – – 0.8 – 0.8 – –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European 5) The back of the concrete component must be checked to ensure
Technical Approval Guidelines (ETAG), Appendix C, for that no chipping has occurred during drilling
information on combining tensile and transverse loads, edge (see ETA-04/0095).
inuence and groups of anchors. 6) Min. axis distance smin = 55 mm for edge clearance c ≥ 80 mm.
2) The concrete has normal reinforcement. Higher values are 7) The ring gap in the attached part must be completely lled with
possible for higher concrete strengths. excess mortar after the setting.
53
W-VIZ/S and WIT-VM 100
Anchor characteristics
M16 M16 M16 M16 M20 M20 M20 M24 M24
Anchor diameter [mm]
hef 90 hef 105 hef 125 hef 145 hef 115 hef 170 hef 190 hef 200 hef 225
Minimum component thickness hmin ≥ [mm] 130 150 170/160 5) 190/1805) 160 230/220 5) 250/2405) 270/260 5) 300/2905)
Minimal axis distance
smin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Minimal edge clearance
cmin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Axial spacing scr,N [mm] 270 315 375 435 345 510 570 600 675
Edge spacing ccr,N [mm] 135 157.5 187.5 217.5 172.5 255 285 300 337.5
Effective anchoring depth hef ≥ [mm] 90 105 125 145 115 170 190 200 225
Nom. drill dia. d0 [mm] 18 18 18 18 22 24 24 26 26
Drill hole depth h0 ≥ [mm] 98 113 133 153 120 180 200 215 240
Through-hole in the component being connected
df ≤ [mm] 18 18 18 18 22 24 24 26 26
– cotter-pint mounting
Through-hole in the component being connected
df ≤ [mm] 20 20 20 20 24 26 26 28 28
– pass-through mounting6)
Installation torque Tinst ≤ [Nm] 50 50 50 50 80 80 80 120 120
Cleaning brush dia. D ≥ [mm] 19 19 19 19 23 25 25 27 27
Performance data
M16 M16 M16 M16 M20 M20 M20 M24 M24
Anchor diameter [mm]
hef 90 hef 105 hef 125 hef 145 hef 115 hef 170 hef 190 hef 200 hef 225
50°C3) /
Tensile zone 14.6 18.4 24.0 29.9 21.1 38.0 44.9 48.5 57.9
80°C4)
(cracked concrete C20/252),
72°C3) /
Permissible central tensile
s ≥ 3 hef, c ≥ 1,5 hef) 9.5 14.3 23.8 23.8 14.3 28.6 28.6 35.7 35.7
120°C4)
without edge inuence
(cracked concrete C20/252), 29.3 36.0 36.0 36.0 35.7 76.0 85.1 97.0 101.7
without edge
C20/252)
inuence
Pressure zone
anchor
load1)
(non-cracked concrete C20/252), 36.0 36.0 36.0 36.0 35.7 85.1 85.1 101.7 101.7
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 152.0 152.0 152.0 152.0 200.0 296.6 296.6 512.0 512.0
F30 [kN] – – 12.0 – – 17.0 – 24.5 –
F60 [kN] – – 6.4 – – 8.8 – 12.7 –
Fire resistance class
F90 [in kN] – – 4.4 – – 6.0 – 8.6 –
F120 [kN] – – 3.4 – – 4.5 – 6.5 –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European 5) The back of the concrete component must be checked to
Technical Approval Guidelines (ETAG), Appendix C, for ensure that no chipping has occurred during drilling
information on combining tensile and transverse loads, edge (see ETA-04/0095).
inuence and groups of anchors. 6) The ring gap in the attached part must be completely lled
2) The concrete has normal reinforcement. Higher values are with excess mortar after the setting.
possible for higher concrete strengths.
54
W-VIZ/S and WIT-VM 100
Designation Anchor Effective Attachment Total Drill bit Drill hole No. attachment Approval Art. No. P.
dia. anchoring height tfix length L nominal depth h0 ≥ points per cartridge ETA Qty.
depth hef [mm] [mm] dia. d0 [mm] Approx. qty.
[mm] [mm]
40 15 65 42 75 0905 440 811
15 80 0905 440 801
M8 10
50 30 95 55 62 0905 440 802
45 110 0905 440 803
10 85 0905 441 001
20 95 0905 441 002
60 30 105 65 42 0905 441 003
M10 12
60 135 0905 441 004
100 175 0905 441 005
75 20 110 80 36 0905 441 011
70 25 115 75 37 0905 441 211
10 110 0905 441 201
25 125 0905 441 202
50 150 0905 441 203
80 85 30
100 200 0905 441 204
10
125 225 0905 441 205
M12 165 265 14 0905 441 206
95 25 140 100 0905 441 221
25 145 0905 441 251
W-VIZ-A/S 28 ETA-04/0095
100 60 180 105 0905 441 252
100 220 0905 441 253*
110 25 155 115 0905 441 261*
27
125 25 170 130 0905 441 271
90 30 145 98 23 0905 441 611
105 30 160 113 20 0905 441 621
30 180 0905 441 601
M16 60 210 18 0905 441 602
125 133 18
100 250 0905 441 603
165 315 0905 441 604
145 30 200 153 16 0905 441 631
115 30 175 22 120 12 0905 442 011*
25 230 0905 442 001
M20 170 50 255 180 0905 442 002
24 8
100 305 0905 442 003
5
190 50 275 200 0905 442 021
50 290 0905 442 401
200 215 7
M24 100 340 26 0905 442 402*
225 50 315 240 6 0905 442 411*
55
W-VIZ/A4 and WIT-VM 100
Individual attachment:
Cracked and non-cracked concrete
Proof of performance
Produce drilled hole Check diameter of Clean drill hole (blow out Screw mixer onto Before use, press out Fill composite mortar Press in anchor rod Visual check of Comply with Mount component,
cleaning brushes 2 x, brush out mechanically cartridge approx. 10 cm cord. starting from base of up to drill hole base mortar lling hardening time of apply installation
2 x, blow out 2 x), with Do not use this initial drill hole while turning slightly quantity, setting composite mortar torque
M20 and larger, blow mortar! depth marking
out with compressed air
(compressed-air nozzle!)
56
W-VIZ/A4 and WIT-VM 100
s ≥ 3 hef, c ≥ 1.5 hef) 2.4 3.6 5.7 5.7 7.6 9.5 9.5 14.3 14.3 14.3
120°C4)
without edge inuence
(cracked concrete C20/252), 8.6 8.6 13.1 13.1 19.4 19.4 19.4 19.4 19.4 19.4
transverse
load1)
(non-cracked concrete C20/252), 8.6 8.6 13.1 13.1 19.4 19.4 19.4 19.4 19.4 19.4
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 17.1 17.1 34.3 34.3 60 60 60 60 60 60
F30 [kN] – 3.0 7.0 – – 10.0 – 10.0 – –
F60 [kN] – 0.3 0.95 – – 2.8 – 2.8 – –
Fire resistance class
F90 [in kN] – – 0.3 – – 1.35 – 1.35 – –
F120 [kN] – – – – – 0.8 – 0.8 – –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European 5) The back of the concrete component must be checked to ensure
Technical Approval Guidelines (ETAG), Appendix C, for that no chipping has occurred during drilling
information on combining tensile and transverse loads, edge (see ETA-04/0095).
inuence and groups of anchors. 6) Min. axis distance s
min = 55 mm for edge clearance c ≥ 80 mm.
2) The concrete has normal reinforcement. Higher values are 7) The ring gap in the attached part must be completely lled with
possible for higher concrete strengths. excess mortar after the setting.
57
W-VIZ/A4 and WIT-VM 100
Anchor characteristics W-VIZ/A4 see ETA-04/0095
M16 M16 M16 M16 M20 M20 M20 M24 M24
Anchor diameter [mm] hef 90 hef 105 hef 125 hef 145 hef 115 hef 170 hef 190 hef 200 hef 225
Minimum component thickness hmin ≥ [mm] 130 150 170/1605) 190/1805) 160 230/2205) 250/2405) 270/2605) 300/2905)
Minimal axis distance
smin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Minimal edge clearance
cmin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Axial spacing scr,N [mm] 270 315 375 435 345 510 570 600 675
Edge spacing ccr,N [mm] 135 157.5 187.5 217.5 172.5 255 285 300 337.5
Effective anchoring depth hef ≥ [mm] 90 105 125 145 115 170 190 200 225
Nom. drill dia. d0 [mm] 18 18 18 18 22 24 24 26 26
Drill hole depth h0 ≥ [mm] 98 113 133 153 120 180 200 215 240
Through-hole in the component being connected
df ≤ [mm] 18 18 18 18 22 24 24 26 26
– cotter-pint mounting
Through-hole in the component being connected
df ≤ [mm] 20 20 20 20 24 26 26 28 28
– pass-through mounting6)
Installation torque Tinst ≤ [Nm] 50 50 50 50 80 80 80 120 120
Cleaning brush dia. D ≥ [mm] 19 19 19 19 23 25 25 27 27
s ≥ 3 hef, c ≥ 1,5 hef) 9.5 14.3 23.8 23.8 14.3 28.6 28.6 35.7 35.7
120°C4)
without edge inuence
Pressure zone Nperm. [kN] 50°C3) / 19.1 23.8 23.8 28.6 29.6 53.2 54.8 67.9 66.7
(non-cracked concrete C20/252)) 80°C4)
of a single anchor
=
Minimum axial and edge spacing C20/252) 72°C3) /
(scr,sp ≥ 3 hef, ccr,sp ≥ 1.5 hef) 11.9 16.7 23.8 23.8 19.1 35.7 35.7 45.2 45.2
120°C4)
Pressure zone
(non-cracked concrete C20/252)) 50°C3) /
20.5 25.8 33.5 35.7 29.6 53.2 62.9 67.9 81.0
load1)
(cracked concrete C20/252), 29.3 36.0 36.0 36.0 42.3 74.9 74.9 89.1 89.1
without edge
(non-cracked concrete C20/252), 36.0 36.0 36.0 36.0 43.9 74.9 74.9 89.1 89.1
load1)
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 152.0 152.0 152.0 152.0 231.6 259.4 259.4 448.0 448.0
F30 [kN] – – 12.0 – – 17.0 – 24.5 –
F60 [kN] – – 6.4 – – 8.8 – 12.7 –
Fire resistance class
F90 [in kN] – – 4.4 – – 6.0 – 8.6 –
F120 [kN] – – 3.4 – – 4.5 – 6.5 –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European Tech- 5) The back of the concrete component must be checked to ensure
nical Approval Guidelines (ETAG), Appendix C, for information that no chipping has occurred during drilling (see ETA-
on combining tensile and transverse loads, edge inuence and 04/0095).
groups of anchors. 6) The ring gap in the attached part must be completely lled with
2) The concrete has normal reinforcement. Higher values are possi- excess mortar after the setting.
ble for higher concrete strengths.
58
W-VIZ/A4 and WIT-VM 100
Anchor bar dimensions: W-VIZ-A/A4, A4 stainless steel
Designa- Anchor Effective Attach- Total Drill bit Drill hole No. attach- Approval Art. No. P.
tion dia. anchoring ment length L nominal depth h0 ≥ ment points ETA Qty.
depth hef height [mm] dia. d0 [mm] per cartridge
[mm] tfix [mm] Approx. qty.
[mm]
40 15 65 42 75 0905 450 811
15 80 0905 450 801
M8 10
50 30 95 55 62 0905 450 802
45 110 0905 450 803
10 85 0905 451 001
20 95 0905 451 002
60 30 105 65 42 0905 451 003
M10 12
60 135 0905 451 004
100 175 0905 451 005
75 20 110 80 36 0905 451 011
70 25 115 75 37 0905 451 211
10 110 0905 451 201
25 125 0905 451 202
50 150 0905 451 203
80 85 30
100 200 0905 451 204
125 225 0905 451 205 10
165 265 0905 451 206
M12 95 25 140 14 100 0905 451 221
25 145 0905 451 251
60 180 28 0905 451 252
100 105
W-VIZ-A/A4 100 220 ETA-04/0095 0905 451 253*
59
WIT-VM 100 for W-VIZ/S, W-VIZ/A4
WIT-PM 100 Injection Mortar (temperature in anchoring base ≥ –5°C) 1 2
Accessories
Designation Appearance Art. No. P. Qty.
60
W-VIZ-IG/SINJECTION
W-VIZ-IG/S INJECTION SYSTEM
SYSTEM With WIT-VM 100
23.3 Injection Mortar
Individual fastening:
Cracked and uncracked concrete
Galvanized steel
For use with the
Application Gun, Art. No. 0891 003,
or HandyMax®, Art. No. 0891 007.
Proof of performance
• The temperature in the area of mortaring may not exceed +50°C or +72°C, briefly +80°C or
Approvals Drill hole cleaning:
+120°C.
• Clean drill hole:
European Technical Blow out 2x, brush out
• For use in concrete < C20/25 and pressure-resistant natural stone (without approval).
• W-VIZ-IG/S (galvanized steel) can be used in dry indoor rooms.
Approval mechanically 2x, blow out 2x. • Suitable for fastening metal structures, metal profiles, brackets, foot plates, supports, railings, wood
For M16 or larger drill hole,
Option 1 blow out with compressed
structures, beams etc.
Setting instructions
Drill the hole. Check cleaning Clean drill hole (blow out 2x, Screw mixer onto Before use, press out approx.
brush dia. brush out mechanically 2x, blow cartridge. 10 cm bead. Do not use this
out 2x), with M16 and larger, initial mortar!
blow out with compressed air
(compressed-air nozzle).
KR - 01/13 - 15157 - ©
Fill composite mortar Push in female-thread Carry out visual check and Remove extruded mortar Install component; maximum
starting from base of anchor while turning comply with composite and protective cap. torque may not be exceeded.
drill hole. slightly. mortar hardening time.
61
W-VIZ-IG/S InJeCtIon SYSteM, M6 to M10
W-VIZ-IG/S INJECTION SYSTEM 23.3
Performance data
M6 M6 M8 M8 M10 M10
Female thread [mm] hef 40 hef 50 hef 60 hef 75 hef 70 hef 80
50°C3)/
single anchor without
80°C4) 4.3
Tensile zone 6.1 8.0 11.1 10.0 12.3
Permissible centric
Tensile zone
(cracked concrete C20/252), 4.6 4.6 5.4 8.6 10.3 10.3
Permissible trans-
verse load1) on a
c ≥ 10 hef)
edge influence
Vperm. [kN]
= C20/252)
Pressure zone
(uncracked concrete C20/252), 4.6 4.6 5.4 8.6 10.3 10.3
c ≥ 10 hef)
Permissible bending torque Mperm. [Nm] 6.9 6.9 17.1 17.1 34.3 34.3
Characteristic values
Minimum component thickness hmin ≥ [mm] 80 80 100 110 110 110
Minimum axial spacing
smin ≥ [mm] 40 40 40 40 40 50 40 50 55 55 40 55
Cracked concrete Uncr. concrete
Minimum edge spacing
cmin ≥ [mm] 40 40 40 40 40 50 40 50 55 55 50 55
Cracked concrete Uncr. concrete
Axial spacing scr,N [mm] 120 150 180 225 210 240
Edge spacing ccr,N [mm] 60 75 90 112.5 105 120
Effective anchoring depth hef [mm] 40 50 60 75 70 80
Nom. drill dia. d0 [mm] 10 10 12 12 14 14
Drill hole depth h0 ≥ [mm] 42 55 65 80 80 85
Through-hole in the component being connected df ≤ [mm] 7 7 9 9 12 12
Torque while installing anchor Tinst ≤ [Nm] 8 8 10 10 15 15
Cleaning brush dia. D ≥ [mm] 10.8 10.8 13.0 13.0 15.0 15.0
Drill hole cleaning M6 – M10: Blow out 2x, brush out mechanically 2x, blow out 2x
Cleaning Brush (Steel) Art. No. P.Qty = 1 0905 499 001 0905 499 002 0905 499 003
Machine Mount Art. No. P.Qty = 1 Hexagon: Art. No. 0905 499 101/SDS-plus Mount: Art. No. 0905 499 102
Extension Art. No. P.Qty = 1 0905 499 111
Brush Template Art. No. P.Qty = 1 0905 499 099
Blow-Out Pump Art. No. P.Qty = 1 Blow-Out Pump: Art. No. 0903 990 001
Anchor dimensions
W-VIZ-IG/S Dia. M6 M8 M10
Effective anchoring depth hef [mm] 40 50 60 75 70 80
Total length l [mm] 41 52 63 78 74 84
Thread length Lth [mm] 12 12 16 16 20 20
Minimum screw-in depth Lsdmin [mm] 7 7 9 9 12 12
Designation W-VIZ-IG/S 40 M6 x 41 50 M6 x 52 60 M8 x 63 75 M8 x 78 70 M10 x 74 80 M10 x 84
W-VIZ-IG/S Female-Thread Anchor Art. No. 5916 106 041 5916 106 052 5916 108 063 5916 108 078 5916 110 074 5916 110 084
Galvanized steel
Packing unit P.Qty. 10 10 10 10 10 10
WIT-VM 100 Mortar Cartridge Mortar Cartridge, 330 ml (incl. 1 static mixer) Art. No. 0905 440 003 P.Qty. = 1/12
Number of attachment points/cartridges Approx. qty. 62 52 36 30 32 24
Static Mixer Art. No. P.Qty = 10 0903 420 001
Extension for static mixer Art. No. P.Qty = 10 0903 420 004
1) The part safety coefficients of the resistances regulated in the approval and a part safety coefficient of the effects of γF = 1.4 have been
taken into account. For the combination of tensile and transverse loads, for edge in uence and anchor groups, please refer to the
Guideline for European Technical Approval (ETAG), Appendix C.
2) The concrete has normal reinforcement. Higher values are possible for higher concrete strengths.
3) Maximum long-term temperature.
4) Maximum short-term temperature.
5) The back of the concrete component must be checked to ensure that no chipping has occurred during drilling (see ETA-04/0095).
62
W-VIZ-IG/SINJECTION
W-VIZ-IG/S InJeCtIon SYSteM, M12 to M20
SYSTEM 23.3
Performance data
M12 M12 M12 M16 M16 M20
Female thread [mm] hef 90 hef 105 hef 125 hef 115 hef 170 hef 170
50°C3)/
single anchor without
80°C4) 14.6
Tensile zone 18.4 24.0 21.1 38.0 38.0
(cracked concrete C20/252),
Permissible centric
tensile load1) on a
s ≥ 3 hef, c ≥ 1.5 hef) 72°C3)/ 9.5 14.3 23.8 14.3 28.6 35.7
edge influence
Tensile zone
single anchor with-
out edge influence
c ≥ 10 hef)
Vperm. [kN]
= C20/252)
Pressure zone
(uncracked concrete C20/252), 19.4 19.4 19.4 14.9 36.0 30.9
c ≥ 10 hef)
Permissible bending torque Mperm. [Nm] 60.0 60.0 60.0 121.1 152.0 296.6
Characteristic values
170 230 230
Minimum component thickness hmin ≥ [mm] 130 150 160
1605) 2205) 2205)
Minimum axial spacing
smin ≥ [mm] 50 50 50 60 60 60 80 80 80 80 80 80
Cracked concrete Uncr. concrete
Minimum edge spacing
cmin ≥ [mm] 50 50 50 60 60 60 80 80 80 80 80 80
Cracked concrete Uncr. concrete
Axial spacing scr,N [mm] 270 315 375 345 510 510
Edge spacing ccr,N [mm] 135 157.5 187.5 172.5 255 255
Effective anchoring depth hef [mm] 90 105 125 115 170 170
Nom. drill dia. d0 [mm] 18 18 18 22 24 26
Drill hole depth h0 ≥ [mm] 98 113 133 120 180 185
Through-hole in the component being connected df ≤ [mm] 14 14 14 18 18 22
Torque while installing anchor Tinst ≤ [Nm] 25 25 25 50 50 80
Cleaning brush dia. D ≥ [mm] 19 19 19 23 25 27
Drill hole cleaning M12: Blow out 2x, brush out mechanically 2x, blow out 2x / M16 – M20: Blow out with compressed air
(6 bar) 2x, brush out mechanically 2x, blow out with compressed air (6 bar) 2x
Cleaning Brush (Steel) Art. No. P.Qty = 1 0905 499 004 0905 499 007 0905 499 005 0905 499 006
Machine Mount Art. No. P.Qty = 1 Hexagon: Art. No. 0905 499 101/SDS-plus Mount: Art. No. 0905 499 102
Extension Art. No. P.Qty = 1 0905 499 111
Brush Template Art. No. P.Qty = 1 0905 499 099
Blow-Out Pump/Compressed-Air Nozzle Art. No. P.Qty = 1 Blow-Out Pump: Art. No. 0903 990 001 Compressed-Air Nozzle6): Art. No. 0905 499 201
designed for Art. No. 0714 92 13
Anchor dimensions
W-VIZ-IG/S Dia. M12 M16 M20
Effective anchoring depth hef [mm] 90 105 125 115 170 170
Total length l [mm] 94 109 130 120 180 182
Thread length Lth [mm] 24 24 24 32 32 40
Minimum screw-in depth Lsdmin [mm] 14 14 14 18 18 22
Designation W-VIZ-IG/S 90 M12 x 94 105 M12 x 109 125 M12 x 130 115 M16 x 120 170 M16 x 180 170 M20 x 182
W-VIZ-IG/S Female-Thread Anchor Art. No. 5916 112 094 5916 112 109 5916 112 130 5916 116 120 5916 116 180 5916 120 182
Galvanized steel
Packing unit P.Qty. 10 10 10 5 5 5
WIT-VM 100 Mortar Cartridge Mortar Cartridge, 330 ml (incl. 1 static mixer) Art. No. 0905 440 003 P.Qty. = 1/12
Number of attachment points/cartridges Approx. qty. 18 16 14 10 6 6
Static Mixer Art. No. P.Qty = 10 0903 420 001
Extension for static mixer Art. No. P.Qty = 10 0903 420 004
1) The part safety coefficients of the resistances regulated in the 3) Maximum long-term temperature.
approval and a part safety coefficient of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. For the combination of tensile and 5) The back of the concrete component must be checked to ensure
transverse loads, for edge in uence and anchor groups, please that no chipping has occurred during drilling (see ETA-04/0094).
refer to the Guideline for European Technical Approval (ETAG), 6) Compressed-air nozzle designed for Blow-Out Gun
63
W-VIZ-IG/A4, W-VIZ-IG/HCR INJECTION SYSTEMS
filled with
64
W-VIZ-IG/A4, W-VIZ-IG/HCR INJECTION SYSTEMS
taken into account. For the combination of tensile and transverse loads, for edge influence
65
W-VIZ-IG/A4, W-VIZ-IG/HCR INJECTION SYSTEMS
influence
66
HOLLOWPROFILE
HOLLOW PROFILEFASTENER
FASTENER BOXBOLT
BOXBOLT® ® Galvanised steel,
blue passivated
Galvanised (A2K)
steel,
blue passivated
Hot-dip galvanised (A2K)
steel
Hot-dip galvanised
Stainless steel A4 steel
Stainless steel A4
The mechanical material properties of the
screws are strength class 8.8 according to
DIN EN ISO 898-1:1999-11
or strength class 70 according to
DIN EN ISO 3506-1:1998-03.
Nom. Screw Width Width Sleeve Collar Sleeve Clamping length lk Galvanised steel Steel A4
dia. length across flats across flats dia. thickness length blue passivated (A2K) hot-dipped
l in mm S in mm SSl in mm DSl in mm kSl mm lSl mm Min. mm Max. mm Art. No. P. Qty. Art. No. P. Qty. Art. No. P. Qty.
M61 45 10 18 10.5 5 35 4 29 0485 806 1 100/1
50 40 5 26 0485 808 1 0485 908 1 0487 908 1 50/1
50/1 50/1
M8 70 13 22 13.5 6 60 18 46 0485 808 2 0485 908 2
90 80 30 66 0485 808 3 40/1 0485 908 3 40/1
50 40 5 23 0485 810 1 0485 910 1 0487 910 1 20/1
M10 70 16 24 17.5 7 60 19 43 0485 810 2 25/1 0485 910 2 25/1
90 80 35 63 0485 810 3 0485 910 3
55 45 5 25 0485 812 1 25/1 0485 912 1 25/1 0487 912 1 20/1
M12 80 18 26 19.5 8 70 22 50 0485 812 2 0485 912 2
20/1 20/1
100 90 40 70 0485 812 3 0485 912 3
75 61 6 35 0485 816 1 0485 916 1 0487 916 1 10/1
M16 100 24 36 25.5 9 85 30 60 0485 816 2 10/1 0485 916 2 10/1
120 105 55 80 0485 816 3 0485 916 3
100 78 8 42 0485 820 1 0485 920 1 0487 920 1 5/1
M20 120 30 46 32.5 11 108 36 72 0485 820 2 5/1 0485 920 2 5/1
150 133 66 102 0485 820 3 0485 920 3
1 Without construction permit
With general
For fastening to hollow sections or other The hollow section fastener is only approved
construction permit
hard-to-reach components. The fastener is for one-time use!
Z-14.4-482 especially suitable for applications where
the installation point is only accessible from Tip: We recommend the BoxSokTM special
one side. tool for installation.
For application examples, see reverse.
The connection is produced by tightening the
screw while bracing the sleeve collar, result- Safety precaution:
ing in expansion of the sleeve. Never exceed the permissible working loads.
The tightening torques can be applied using Before using hollow section fasteners, always
a torque spanner. check that the steel structure can withstand
the required loads.
Nom. dia. Drilling dia. Tightening Edge and hole spacing Maximum working load in kN1
(tolerance +1/–0.25) torque Edge and hole spacings Steel, galvanised and hot-dip galvanised Stainless steel A4
Minimum spacing in mm Perm. tensile load Perm. shear load Perm. tensile load Perm. shear load
in mm in Nm A B Nperm.1 Vperm.1 Nperm.1 Vperm.1
M62 11 19 30 11 5.712 16.212 – –
M8 14 25 35 13 12.86 21.07 13.29 26.14
MWF - 04/12 - 10702 - ©
67
CHEMICAL
ANCHORS
W-VP
Bonded anchor/ Capsule system W-VP Approved for:
Concrete C20/25 to C50/60
W-VP
Benefits:
• The pre-portioned resin volume guarantees
always safe adhesion and thus avoids
W-VD-A/S application errors.
• The short curing time allows to proceed
speedily.
• The included setting tool allows always smooth
installations.
W-VD-A/F • The usability can easily be checked and thus
avoids application errors.
• The capsule can be used as long the resin flows
like honey while shaking it.
W-VD-A/A4
Approvals and Certificates:
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized / A4 stainless
steel / HCR highly corrosion-
resistant steel
Type
of fastening Pre fastening
Suitable for Non-cracked concrete
70
W-VP
Article description Article No. Drill Diameter Drill hole depth Fits*
d0 [mm] h0 [mm] PU
W-VP M8 5915 908 080 10 80 W-VD-A M8 10
W-VP M10 5915 910 080 12 90 W-VD-A M10 10
W-VP M12 5915 912 095 14 110 W-VD-A M12 10
W-VP M16 5915 916 095 18 125 W-VD-A M16 10
W-VP M20 5915 920 175 22 170 W-VD-A M20 10
W-VP M24 5915 924 210 26 210 W-VD-A M24 5
*Threaded rods see page 42
71
W-VD-IG/S , W-VD-IG/A4 SHEAR ANCHOR INTERNAL THREAD CARTRIDGE SYSTEM
Uncracked concrete
W-VD-IG/S Galvanized steel
W-VD-IG/A4 Stainless steel A4
Benefits:
• Can be used for medium to heavy loads
• Anchoring uncracked concrete (concrete
pressure zone) C12/15 to C50/60
• The anchor may be used for anchorage with
primarily static loads (e.g. own weight, installations,
support materials) or quasi-static loads
• Installation in dry or wet concrete
• The temperature must not exceed +50°C and briefly
+80°C in the mortar area
• For use in concrete < C20/25 and pressure-resistant
natural stone (without approval)
• W-VD-IG/S (galvanized steel) can be used in dry
interior rooms
• W-VD-IG/A4 (stainless steel A4) can be used in dry
interior rooms, outdoors or in wet rooms
• Suitable for fastening metal constructions, metal profiles,
brackets, foot plates, supports, wood structures, beams etc.
Advantages :
• High loads, small edge and axial distances
• Pre-made mortar quantity
• Hardened composite mortar largely seals the drill hole
• Attachment with low expansion pressure allows
small edge and axial distances.
Properties :
• Anchorage by connection between mortar, internal screw
thread sleeve and anchoring base. Internal screw thread
sleeve galvanized steel and stainless steel A4 in the sizes
(internal thread) M8, M10, M12 and M16.
Installation:
72
W-VD-IG/S , W-VD-IG/A4 SHEAR ANCHOR INTERNAL THREAD CARTRIDGE SYSTEM
Performance data
Inner thread M8 M10 M12 M16
Recommended tensile load Nrec.[kN]
Pressure zone 7.0 11.1 16.1 25.0
= C20/25
(uncracked concrete C20/25)
Recommended transverse load
Pressure zone Vrec.[kN] 8.0 8.3 9.7 19.5
= C20/25
(uncracked concrete C20/25)
W-VD-IG/A4 Internal Thread Sleeve Art.No. 0905 411 080 0905 411 010 0905 411 012 0905 411 016
Stainless steel
Packing unit P.Qty. 10 10 10 10
W-VD Art.No. 5915 012 095 0905 414 5915 016 095 0905 422
Shear anchor mortar cartridge
Packing unit P.Qty. 10 10 10 10
73
WIT-PE 500
Injection system WIT-PE 500 Approved for:
Concrete C20/25 to C50/60, cracked
Benefits:
• The prolonged gelling/working time allows
convenient adjustment at higher temperature
and with large embedment depth.
385 ml 585 ml 1400 ml • Most approvals guarantee the optimized load
Art.no.: Art.no.: Art.no.:
0903 480 001 0903 480 003 0903 480 002 capacities for threaded rods and rebar.
• It is specially developed chemical composition
that allows reliable installation in underwater
conditions and when filled in diamond core drill
holes.
• The low shrinkage of the mortar broadens
∅8 - ∅40
the application spectrum in addition for big
diameter fastener elements.
M8 - M39
Technical Data:
Head configuration Extended threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized / A4
stainless steel
Type
of fastening Pre fastening
Cracked
Suitable for concrete
Suitable for fastening metal constructions, metal profiles, brackets, Non-cracked concrete
foot plates, supports, cable conduits, pipes, railings, machines, etc.
Temperature Gelling - working time Minimum Curing time Minimum Curing time
of Concrete in dry concrete in wet concrete
5°C to 9°C 60 min 72 h 142 h
10°C to 19°C 45 min 45 h 90 h
20°C to 29°C 30 min 10 h 20 h
30°C to 39°C 20 min 6 h 12 h
≥ 40°C 12 min 4 h 8h
Installation:
74
WIT-PE 500
Recommended loads
Thread size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39
Effective anchorage depth hef,typ [mm] 80 90 110 125 170 210 240 270 300 330 360
Non-cracked concrete
Tensile C20/25 Nrec [kN] 8.7 13.8 20.1 28.0 38.1 52.3 63.9 76.2 89.3 103.0 117.3
C50/60 Nrec [kN] 8.7 13.8 20.1 30.8 41.9 57.5 70.3 83.8 98.2 113.3 129.1
Shear ≥ C20/25 Vrec [kN] 5.3 8.3 12.1 22.4 35.0 50.3 65.6 80.1 99.1 116.7 139.4
Cracked concrete
Tensile C20/25 Nrec [kN] 12.3 16.2 21.8 29.6 38.1 47.6
C50/60 Nrec [kN] 13.6 17.8 24.0 32.6 41.9 52.4
Shear ≥ C20/25 Vrec [kN] 12.1 22.4 35.0 50.3 65.6 80.1
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor challenges
Thread size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39
hef,min [mm] 60 60 70 80 90 96 108 120 132 144 156
Effective anchorage depth
hef,max [mm] 96 120 144 192 240 288 324 360 396 432 468
Nominal drill hole diameter d0 [mm] 10 12 14 18 24 28 32 35 37 42 46
Drill depth h0 / h1 [mm] = hef
Clearance-hole in fixture
df [mm] 9 12 14 18 22 26 30 33 36 39 42
to be attached
Wrench size SW [mm] 13 17 19 24 30 36 41 46 50 55 60
Required torque Tinst [Nm] 10 20 40 80 120 160 180 200 350 500 700
Min. thickness of
hmin [mm] = hef + 30mm ≥ 100mm = hef + 2d0
concrete member
Minimum spacing smin [mm] 40 50 60 80 100 120 135 150 165 180 195
Minimum edge distances cmin [mm] 40 50 60 80 100 120 135 150 165 180 195
df
Dispensing Gun
d0
75
WIT-PE 500
Recommended loads
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32 Ø40
Effective anchorage depth hef,typ [mm] 80 90 110 125 125 170 210 270 300 360
Non-cracked concrete
Tensile C20/25 Nrec [kN] 11.2 15.7 21.4 28.0 28.0 38.1 52.3 76.2 89.3 117.3
C50/60 Nrec [kN] 12.3 17.3 23.5 30.8 30.8 41.9 57.5 83.8 98.2 129.1
Shear ≥ C20/25 Vrec [kN] 6.6 10.3 14.8 20.2 26.3 41.1 64.3 80.6 105.3 164.6
Cracked concrete
Tensile C20/25 Nrec [kN] 12.3 15.3 16.2 21.8 29.6 42.8 56.4
C50/60 Nrec [kN] 13.6 16.8 17.8 24.0 32.6 47.1 62.1
Shear ≥ C20/25 Vrec [kN] 14.8 20.2 26.3 41.1 64.3 80.6 105.3
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor challenges
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32 Ø40
hmin
h0
hef
d0
76
BAtterY PoWereD APPLICAtIon GUn WIt
BATTERY POWERED APPLICATION GUN WIT
•Robust
All components designed for tough construction site application
•Memory function
By actuating the memory function, the application gun repeats a pre-
recorded application cycle, ensuring that exactly the right quantity of
mortar is injected into the drill hole in series application
•Adjustable speed
Infinitely controllable with adjustment wheel in handle
•Drip protection
After stopping application, the piston moves back slightly, preventing the
mortar mixture from dripping
Additional item :
•Dual-drive rod
Application forces are transferred via two toothed drive rods
•LED light
The working area is always well illuminated
Technical Data
Packing Unit 1
Nominal voltage 18 V/DC
Type of rechargeable battery Li-lon
Number of rechargeable battery/batteries 1 PCS
Suitable for cartridges type. Side-by-side (1:3) + 385 ml
Side-by-side + 585 ml
77
WIT-VM 250
Injection system WIT-VM 250 Approved for:
Concrete C20 / 25 to C50/60, cracked
Benefits:
• Styrene-free, quick-curing high-performance
vinylester mortar allows the anchorage to be
finished in a short period of time.
• Most approvals guarantees optimized load
capacities for threaded rods and rebar.
• Universal fixing system for a broad range of
420 ml applications on building sites.
Art. No. : 0903 450 205 • The special chemical composition allows
working in high corrosion areas.
∅8 - ∅32
M8 - M30
Applications:
Technical Data:
Head configuration Extended threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized / A4
stainless steel
Type
of fastening Pre fastening
Cracked
Suitable for concrete
Non-cracked concrete
Securing wooden structures, metal structures, metal profiles,
brackets, screens, plumbing objects,, cable conduits
Temperature Gelling - working time Minimum Curing time Minimum Curing time
of Concrete in dry concrete in wet concrete
-10°C bis -4°C1) 90 min 24 h 48 h
-5°C bis -1°C 90 min 14 h 28 h
0°C bis 4°C 45 min 7h 14 h
5°C bis 10°C 25 min 2h 4h
10°C bis 19°C 15 min 80 min 160 min
20°C bis 29°C 6 min 45 min 90 min
30°C bis 34°C 4 min 25 min 50 min
35°C bis 39°C 4 min 20 min 40 min
≥ 40°C 1.5 min 15 min 30 min
1)
Cartridge temperature must be at min. 15°C
Installation:
78
WIT-VM 250
Recommended loads
Thread size M8 M10 M12 M16 M20 M24 M27 M30
Effective anchorage depth hef,typ [mm] 80 90 110 125 170 210 240 270
Non-cracked concrete
Tensile C20/25 Nrec [kN] 8.7 13.5 19.7 28.0 44.4 61.0 74.5 88.9
C50/60 Nrec [kN] 8.7 13.8 20.1 30.8 48.9 67.1 82.0 97.8
Shear ≥ C20/25 Vrec [kN] 5.3 8.3 12.1 22.4 35.0 50.3 65.6 80.1
Cracked concrete
Tensile C20/25 Nrec [kN] 9.1 13.7 23.3 34.6 52.5 63.5
C50/60 Nrec [kN] 10.0 15.1 25.6 38.0 57.8 69.9
Shear ≥ C20/25 Vrec [kN] 12.1 22.4 35.0 50.3 65.6 80.1
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor characteristics
Thread size M8 M10 M12 M16 M20 M24 M27 M30
hef,min [mm] 60 60 70 80 90 96 108 120
Effective anchorage depth
hef,max [mm] 160 200 240 320 400 480 540 600
Nominal drill hole diameter d0 [mm] 10 12 14 18 24 28 32 35
Drill depth h0 / h1 [mm] = hef
Diameter of steel brush db ≥ [mm] 12 14 16 20 26 30 34 37
Clearance-hole in fixture
df [mm] 9 12 14 18 22 26 30 33
to be attached
Wrench size SW [mm] 13 17 19 24 30 36 41 46
Required torque Tinst [Nm] 10 20 40 80 120 160 180 200
Min. thickness of concrete member hmin [mm] = hef +30mm ≥ 100mm = hef + 2d0
Minimum spacing smin [mm] 40 50 60 80 100 120 135 150
Minimum edge distances cmin [mm] 40 50 60 80 100 120 135 150
Dispensing Gun
Art. No. : 1891 003003
79
WIT-VM 250
Recommended loads
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
Effective anchorage depth hef,typ [mm] 80 90 110 125 125 170 210 270 300
Non-cracked concrete
Tensile C20/25 Nrec [kN] 9.6 13.5 19.7 28.0 28.0 44.4 61.0 88.9 101.7
C50/60 Nrec [kN] 10.5 14.8 21.7 30.8 30.8 48.9 67.1 97.8 111.9
Shear ≥ C20/25 Vrec [kN] 6.6 10.3 14.8 20.2 26.3 41.1 64.3 80.6 80.6
Cracked concrete
Tensile C20/25 Nrec [kN] 9.1 13.7 17.1 28.0 38.9 63.5 74.4
C50/60 Nrec [kN] 10.0 15.1 18.9 30.8 42.8 69.9 81.8
Shear ≥ C20/25 Vrec [kN] 14.8 20.2 26.3 41.1 64.3 80.6 80.6
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor characteristics
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
hef,min [mm] 60 60 70 75 80 90 100 112 128
Effective anchorage depth
hef,max [mm] 160 200 240 280 320 400 480 540 640
Nominal drill hole diameter d0 [mm] 12 14 16 18 20 24 32 35 40
Drill depth h0 / h1 [mm] = hef
Diameter of steel brush db ≥ [mm] 14 16 18 20 22 26 34 37 41.5
= hef +30mm
Min. thickness of concrete member hmin [mm] = hef + 2d0
≥ 100mm
Minimum spacing smin [mm] 40 50 60 70 80 100 125 140 160
Minimum edge distances cmin [mm] 40 50 60 70 80 100 125 140 160
hmin
h0
hef
d0
80
WIT-PM
WIT-PM 200
200 2-component reaction resin
25.2
2-component reaction
mortar, resin
polyester styrene-
Masonry mortar, polyester
free styrenefree
Individual fastening:
Uncracked concrete, masonry of solid and
perforated bricks
WIT-PM 200, coaxial cartridge of
420 ml incl. 1 static mixer
Proof of Performance
Approvals 2. Advantages
European Technical Approval European Technical Approval
• Styrene-free and thus especially suitable for anchoring in perforated
brick masonry
Option 7 for uncracked concrete Solid and perforated stone masonry and
aerated concrete (b, c)
• Cartridges can be used up to expiration of the best before date by
replacing the static mixer or by being closed again with sealing cap
3. Features
• Uncracked concrete:
European Technical Approval ETA-12/0569
• Masonry (solid and perforated brick):
European Technical Approval ETA-13/0037
1. Applications • 2-component reaction resin mortar, polyester styrene-free
• Approved for masonry of: • Temperature of anchoring base during processing and hardening: –5°C
solid brick (CB), solid sand-lime brick (SSLB), vertically perforated brick to +35°C
(VPB) and perforated sand-lime brick (PSLB) • Ambient temperature after full hardening
• Approved for uncracked concrete, concrete compression zone (C20/25 –40°C to +40°C
to C50/60) • Transport and storage temperature (cartridge): +5°C to +25°C
• Also suitable for: hollow blocks made of concrete and lightweight • Shelf life (store in a cool, dry and dark place):
concrete Coaxial cartridge (150 ml, 420 ml): 18 months
• Suitable for securing wooden structures, metal structures, metal pro�les, Tubular-�lm cartridge (300 ml): 9 months
brackets, screens, plumbing objects, pipes, cable conduits etc.
Setting instructions
Perforated
brick
Solid brick
Concrete
MWF - 08/13 - 16742 - ©
81
126
WIt-PM 200
WIT-PM 200 25.2
Contents
Designation S co p e o f d e l i v e r y ETA a p p r o v a l A r t . No . P . Qt y .
[ml]
1
1 WIT-PM 200 420 Mortar cartridge of 420 ml (coaxial) & 1 static mixer 5918 240 420
12
Mortar cartridge of 150 ml & 1 static mixer 1
ETA-12/0569
2 WIT-PM 200 150 + 1 press-out piston 5918 241 150
ETA-13/0037 12
(for processing with a silicone application gun)
Mortar cartridge of 300 ml & 1 static mixer 1
3 WIT-PM 200 300 5918 242 300
(for processing with a silicone application gun) 12
127
82
WIt-PM200
WIT-PM 200
25.2
Anchoring in masonry (solid and perforated brick)
Designation Nom. drill dia. Drill hole Anchoring depth Suitable for Approval Art. No. P. Qty.
d0 [mm] depth h0 [mm] hef [mm] anchor rod ETA
SH 12 x 80 12 85 80 M8 0903 44 123
SH 16 x 85 16 90 85 M10 0903 44 164
ETA-13/0037 20
SH 16 x 130 16 135 130 M10 0903 44 165
SH 20 x85 20 90 85 M12 and M16 0903 44 203
Designation Nom. drill dia. Drill hole Anchoring depth Suitable for Approval Art. No. P. Qty.
d0 [mm] depth h0 [mm] hef [mm] anchor rod ETA
SH 16 x 130/200 16 340 130 M10 ETA-13/0037 0903 44 163 10
Dia- Processed without sieve sleeve Processed with sieve sleeve Suitable Galvanized steel Stainless steel P. Qty.
meter Nom. Anchoring Drill hole Nom. Anchoring Drill hole for sieve Steel quality: A4-70
drill dia. depth depth drill dia. depth depth sleeve 5.8 Art. No.
d0 [mm] hef [mm] h0 [mm] d0 [mm] hef [mm] h0 [mm] Art. No.
M8 10 80 80 12 80 85 SH 12 x 80 5916 008 999 5916 108 999
SH 16 x 85;
85 90 SH 16 x 130;
M10 12 90 90 16 130 135 5916 010 999 5916 110 999
SH 16 x 10
130 135 + t 130/200
M12 14 100 100 20 85 90 SH 20 x 85 5916 012 999 5916 112 999
M16 18 100 100 20 85 90 SH 20 x 85 5916 016 999 5916 116 999
MWF - 08/13 - 16744 - ©
83
128
WIt-PM 200
WIT-PM 200 25.2
Anchoring in uncracked concrete
Uncracked concrete: Anchor rods, galvanized steel 5.8 and A4-70 stainless steel
Dia- Fastening Total ective Nom. drill Drill hole ETA Galvanized steel Stainless steel P. Qty.
meter height length anchoring dia. depth approval Steel quality: A4-70
t x [mm] L [in mm] depth d0 [mm] h0 5.8 Art. No.
hef [mm] Art. No.
20 110 5915 108 110 5915 208 110
M8 60 150 80 10 80 5915 108 150 5915 208 150
– 1,000 5916 008 999 5916 108 999
15 115 5915 110 115 5915 210 115
30 130 5915 110 130 5915 210 130
M10 65 165 90 12 90 5915 110 165 5915 210 165
90 190 5915 110 190 5915 210 190
– 1,000 5916 010 999 5916 110 999
10 135 5915 112 135 5915 212 135
35 160 5915 112 160 5915 212 160
85 210 5915 112 210 5915 212 210
M12 110 14 110
125 250 5915 112 250 5915 212 250 10
175 300 5915 112 300 5915 212 300
ETA-
– 1,000 5916 012 999 5916 112 999
12/0569
20 165 5915 116 165 5915 216 165
45 190 5915 116 190 5915 216 190
85 230 5915 116 230 5915 216 230
M16 125 18 125
105 250 5915 116 250 5915 216 250
155 300 5915 116 300 5915 216 300
– 1,000 5916 016 999 5916 116 999
20 220 5915 120 220 5915 220 220
60 260 5915 120 260 5915 220 260
M20 170 24 170
100 300 5915 120 300 5915 220 300
– 1,000 5916 020 999 5916 120 999
15 260 5915 124 260 5915 224 260
5
M24 55 300 210 28 210 5915 124 300 5915 224 300
– 1,000 5916 024 999 5916 124 999
MWF - 01/14 - 16745 - ©
84 129
CLEANING ACCESSORIES
Cleaning accessories
For diameter Length Nom. drill dia. Cleaning Extension Machine Blow-Out P. Qty.
[mm] d0 [mm] Brush Art. No. Mounting Pump
Art. No. Art. No. Art. No.
M8 170 10 1903 489 000
M10, Ø8 170 12 1903 489 001
M12, Ø10 200 14 1903 489 002
Ø12 200 16 1903 489 003
M16, Ø14 300 18 1903 489 004
Ø16 300 20 1903 489 005 1903 489 111 Hexagon: 0903 990 001 1
0905 499 101
M20, Ø20 300 24 1903 489 006
M24 300 28 1903 489 007 SDS plus:
M27, Ø25 300 32 1903 489 008 1903 489 101
M30, Ø28 300 35 1903 489 009
Ø32 300 40 1903 489 010
Ø40 300 50 1903 489 011
Art. no. 1903 489 00* Art. No. 0903 990 001
1903 489 111
85
THREADED RODS
W-VD-A/S
W-VD-A/A4
Article Description Art. No. Art. No. Anchor Drill Min. drill Fixture Thread Wrench PU
Lenght dia. hole thickness Size Size
depth
Zinc plated Stainless steel l d0 h0 tfix M SW
Steel grade (5.8) Steel grade (A4-70) mm mm mm mm Qty.
W-VD-A M8-20/110 5915 108 110 5915 208 110 110 20
W-VD-A M8-60/150 5915 108 150 5915 208 150 150 10 80 60 M8 13
M8 x 1000 5916 008 999 5916 108 999 1000 -
W-VD-A M10-15/115 5915 110 115 5915 210 115 115 15
W-VD-A M10-30/130 5915 110 130 5915 210 130 130 30
W-VD-A M10-65/165 5915 110 165 5915 210 165 165 12 90 65 M10 17
W-VD-A M10-90/190 5915 110 190 5915 210 190 190 90
M10 x 1000 5916 010 999 5916 110 999 1000 -
W-VD-A M12-10/135 5915 112 135 5915 212 135 135 10
W-VD-A M12-35/160 5915 112 160 5915 212 160 160 35
W-VD-A M12-85/210 5915 112 210 5915 212 210 210 14 110 85 M12 19 10
W-VD-A M12-125/250 5915 112 250 5915 212 250 250 125
W-VD-A M12-175/300 5915 112 300 5915 212 300 300 175
M12 x 1000 5916 012 999 5916 112 999 1000 -
W-VD-A M16-20/165 5915 116 165 5915 216 165 155 20
W-VD-A M16-45/190 5915 116 190 5915 216 190 190 45
W-VD-A M16-85/230 5915 116 230 5915 216 230 230 18 125 85 M16 24
W-VD-A M16-105/250 5915 116 250 5915 216 250 250 105
W-VD-A M16-155/300 5915 116 300 5915 216 300 300 155
M16 x 1000 5916 016 999 5916 116 999 1000 -
W-VD-A M20-20/220 5915 120 220 5915 220 220 220 20
W-VD-A M20-60/260 5915 120 260 5915 220 260 260 22/24 170 60 M20 30
W-VD-A M20-100/300 5915 120 300 5915 220 300 300 100
M20 x 1000 5916 020 999 5916 120 999 1000 -
W-VD-A M24-15/260 5915 124 260 5915 224 260 260 15
W-VD-A M24-55/300 5915 124 300 5915 224 300 300 26/28 210 55 M24 36 5
M24 x 1000 5916 024 999 5916 124 999 1000 -
86
FRAME FIXING
ANCHORS
87
W-FRA
W-FRA 88
FRAME FIXING W-FRA 8
Benefits:
• Can be loaded immediately – no waiting time.
• Very strong twist lock
• Universal frame-fixing anchor (concrete, masonry of
perforated and solid brick, aerated concrete)
• The anchor sleeve and special screw are pre-assembled.
Reduces installation efforts.
88
1
W-FRA 8
89
W-FRA
W-FRA 8 8
- PU
hnom=60mm
I t SW d0
mm mm mm mm Qty.
1 1 1 80 20
W-FRA 8
2 2 2 100 40
with countersunk
screw 3 3 3 120 60 TX© 30 8 70 50
4 4 4 140 80
1 1 1 80 20
2 2 2 100 40
with hexagon
screw + 3 3 3 120 60 TX© 30 10 8 70 50
pressed-on washer
4 4 4 140 80
1 1 1 80 20
2 2 2 100 40
with countersunk PZ-3 8 70 50
screw 3 3 3 120 60
4 4 4 140 80
90
3
W-FRA 10
FRAME FIXING W-FRA 10
Benefits:
•Can be loaded immediately – no waiting time
•Very strong twist lock
W-FRA H 10 with hexagon screw and pressed-on washer •Universal frame-fixing anchor (concrete, masonry of
perforated and solid brick, aerated concrete)
•The anchor sleeve and special screw are
pre-assembled. Reduces installation efforts.
Technical Data:
Hexagon, Countersunk
Head configuration
and Pan Head
Environmental conditions Indoor, Outdoor
Steel, galvanized / A4
Material composition
stainless steel
Through fastening
Type of fastening
Suitable for Multiple attachment of
non-structural systems in
concrete and masonry
91
W-FRA 10
92
W-FRA 10
Fixture
Article Description Art. No. Art. No. Anchor
thickness for
Drive Wrench Drill Drill PU
length Size hole dia. hole depth
hnom=70mm
Zinc plated Stainless steel l tfix SW d0
A4 mm mm mm mm Qty.
0912 910 401 0912 910 501 80 10
Frame fixing W-FRA 10 0912 910 402 0912 910 502 100
with countersunk screw
30
0912 910 403 0912 910 503 120 50
0912 910 404 0912 910 504 140 70
0912 910 405 - 160 90
TX© 40 10 80 50
0912 910 406 - 180 110
0912 910 407 - 200 130
0912 910 408 - 230 160
0912 910 409 - 260 190
0912 910 410 - 300 230
93
W-UR 8
PLASTIC FRAME-FIXING ANCHOR W-UR 8
PLASTIC FRAME-FIXING ANCHOR W-UR8 Multiple attachment of non
42.1 load-bearing systems: Con-
crete, solid and perforated bricks
W-UR 8 with countersunk screw
and aerated concrete
Benefits:
W-UR 8 with countersunk screw
Galvanized steel
W-UR F 8 with hexagon screw +
Stainless steel A4
• Can be loaded immediately – no waiting time
pressed-on
W-UR F 8 washer • Expanding in four directions - High loads
with hexagon screw + pressed-on washer
Galvanized steel
• Universal frame-fixing anchor (concrete, masonry of
W-UR F 8A4 with panhead screw
Stainless steel perforated and solid brick, aerated concrete)
W-UR F 8 with panhead screw
Galvanized steel
• The anchor sleeve and special screw are
Stainless steel A4 pre-assembled. Reduces installation efforts.
W-UR F 8connecting
W-UR F 8 with with thread
connecting
M6 + M8 thread
M6 + M8
Galvanized steel
Stainless steel A4
Evidence of Performance
Drill hole Clean drilled
hole
Set anchor and
screw
Screw in screw Screw in screw
until ush
Drill hole Clean drilled
hole
Set anchor and
screw
Screw in screw Screw in screw
until ush
Suitable for Non-cracked concrete
94
W-UR 8
95
W-UR 10
PLASTIC FRAME-FIXING ANCHOR W-UR 10
42.2
PLASTIC FRAME-FIXING ANCHOR W- 10
Multiple fastenings of non-load-
W-UR 10 with countersunk screw bearing systems:
Concrete, solid and perforated brick and
Benefits:
aerated concrete
•Can be loaded immediately – no waiting time
•Very
W-UR strong
10 with twist lock
countersunk screw
Drill hole Clean drill hole Set anchor and Screw in the Screw in screw Drill hole Clean drill hole Set anchor and Screw in the Screw in screw
screw screw until ush screw screw until ush
96
W-UR 10
Fixture
Article Description Art. No. Art. No. Anchor
thickness for
Drive Wrench PU
length Size
hnom=70mm
Zinc plated Stainless steel l tfix SW
A4 mm mm Qty.
0912 810 401 0912 810 501 80 10
Frame fixing W-UR 10 0912 810 402 0912 810 502 100
with countersunk screw
30
0912 810 403 0912 810 503 115 45
0912 810 404 0912 810 504 135 65
0912 810 405 0912 810 505 160 90 13
AW© 40 50
0912 810 406 0912 810 506 185 115
0912 810 407 0912 810 507 200 130
0912 810 408 - 230 160
0912 810 409 - 260 190
0912 810 410 - 290 220
0912 810 411 - 320 250
0912 810 601 0912 810 701 80 10
0912 810 602 0912 810 702 100 30
Frame fixing W-UR F 10
with hexagon screw + 0912 810 603 0912 810 703 115 45
pressed-on washer 135 AW© 40 13 40
0912 810 604 0912 810 704 65
(only zinc version)
0912 810 605 0912 810 705 160 90
0912 810 606 - 185 115
0912 810 607 - 200 130
0912 810 608 - 230 160
97
W-KPX PLASTIC ANCHOR
Description
Plug recommended for fixing of wood and
wood-based members
•G
ripped firmly in place
During first stage of installations
the plug is held firmly in place as
the expansion lugs on its outside
prevent it from turining once it has
been placed in hole.
•W
idened Rim
Its widened rim prevents the plug
from sinking too deep into the
drill hole.
Art. Description Art. No. dk xLk [mm] Recommended Eff. Anch. depth Min. depth of Pcs
screw diameter heff [mm] drilled h 0 [mm]
W-KPX-6 1903 630 60x30 3.5-4.0 30 40 1000
W-KPX-8 1903 840 8.0x40 4.0-6 40 50 500
Technical Data
Parameter Unit Size
Ø6 Ø8
Plug dia. dk[mm] 6 8
Hole dia. d0[mm] 6 8
Effective anchorage depth. heff[mm] 30 40
Depth of drill hole h0[mm] 40 50
Drive type x PZ-2
Sleeve material x Poly Propylene
Approval x AT-15-9031/2012
98
NYLON ANCHOR
Polyamide (nylon)
dia. 5-8
Polyamide (nylon)
dia. 10-20
Applications:
• Plastic anchors for lower load range (secondary fastening)
• Can be used in concrete, solid brick, solid sand-lime brick, aerated
concrete and pressure-resistant natural stone.
• Suitable for securing curtain rails, wall shelves, light hanging
cupboards, picture frames, cable ducts, cable clamps, electrical
switches, hand towel rails, signs, motion detectors, hanging
baskets, etc.
• For the attachment of components in conjunction with a wood or
particle board screw (no drill bit, counter thread or ring thread)
Nylon Anchor Assortment • Can be used outside or in rooms subject to moisture in conjunction
Contents: 5 x 25 = 200 pc. with a stainless-steel screw
6 x 30 = 300 pc.
8 x 40 = 150 pc.
10 x 50 = 100 pc. Features:
12 x 60 = 30 pc. • High-quality polyamide (nylon)
14 x 75 = 20 pc. • Halogen- and silicone-free
= 800 pieces • Temperature-resistant from –40°C to +80°C
Art. No. 0964 903 001
P. Qty. 1
Important information for experts:
Advantages: • Drill aerated concrete and perforated bricks in rotating gear
• The knock-in lock prevents premature spreading during (without impact mechanism).
through-bolt mounting • Drilling dust must be removed from the drill hole.
• The twist lock prevents turning in the drilled hole • Screw length = attached part thickness (+ plaster/insulation thickness)
• Spreading-pressure-free dowel neck prevents damage + anchor length + screw dia.
to plaster and tiles
• Through-bolt and cotter-pin mounting
Setting instructions:
99
NYLON ANCHOR
Performance Data
Anchor diameter [mm] 4 5 6 8 10 12 14 16 20
Concrete ≥ B25; C20/25 0.15 0.25 0.38 0.6 0.9 1.4 1.9 2.3 3.0
Recommended
Characteristics Values
Axial spacing a ≥ [mm] 40 50 60 80 100 120 140 160 200
Edge clearance ar ≥ [mm] 20 25 30 40 50 60 70 80 100
Drill hole depth t ≥ [mm] 30 35 40 50 65 75 85 95 105
Setting depth hs ≥ [mm] 20 25 30 40 50 60 75 80 90
Nominal drill dia. ddrl [mm] 4 5 6 8 10 12 14 16 20
Wood screw dia. dscr.wood [mm] 2-3 2.5-4 3.5-5 4.5-6 6-8 8-10 10-12 12-14 16
Particle board screw dia. dscr.particl [mm] 3.5 4.5 5 6 - - - - -
Screw length ls[mm] Attached part thickness (+ plaster/insulation thickness) + anchor length + screw dia.
Anchor Dimensions
Anchor Diameter 4 5 6 8 10 12 14 16 20
Total lenght l [mm]
Max. mounting height da[mm] Depends on screw lenght
Designation
Nylon Anchor 4x20 5x25 6x30 8x40 8x40/M6 10x50 12x60 14x75 16x80 20x90
0903 1680
0903 1050
0903 1260
0903 1475
0903 2090
Art.No.
0903 420
0903 840
0903 525
0903 630
Nylon Anchor
0903 8406
Nylon Anchor
P.Qty: = 100
_
screwing in threaded rods, screws, bolts.)
Art.No.
Packing unit P.Qty.
in ORSY® cartons 200 100/1000 100/500 100/300 50/200 25 20 10 5
®
in ORSY cartons + outer carton 1200/50ea. 600/25 ea. 480/25 ea.
-
5400/100ea. 4000/500ea. 2400/300ea.
- -
bulk packed...pieces each 8000/1000ea. 4800/100ea. 2300/100ea. 1600/200ea.
100
W-ND
W-ND NAIL
NAIL
W-ND ANCHOR
ANCHOR
NAIL ANCHOR
9393
Countersunk
Countersunk head (Type
head SK) SK)
(Type
Nail galvanized steel
Nail galvanized steel
Proof of performance
1. Applications 2. Advantages
Proof of performance
• Can be used in concrete, solid brick, chalky sandstone, aerated • Fast, low-cost installation
concrete, vertically perforated brick, lightweight concrete, perforated • No searching for the matching screw through pre-assembly
1. Applications 2. Advantages
sand-lime brick, screed, gypsum planks • For use in through-bolt mounting
• Can be used in concrete, solid brick, chalky sandstone, aerated • Fast, low-cost installation
• Any attachments in woodworking, metalworking, sanitation and • Can be released again through drive in screw head
concrete, vertically perforated brick, lightweight concrete, perforated
electrical applications for light and medium load range
• No searching for the matching screw through pre-assembly
• No premature spreading thanks to integrated and defined knock-in lock
sand-lime
• Flat brick,
head: screed,
Securinggypsum
brackets,planks
panels, plates, cable ducts and all • For
3. use in through-bolt mounting
Properties
• Any attachments in woodworking, metalworking, sanitation and
components for non-recessed installation • Can be released
• Resistant again through drive in screw head
to UV radiation
electrical applications for light and
• Countersunk head: Securing squared medium loadlaths,
timber, range thin metal sheets and • No premature spreading thanksnylon,
• Plastic dowel made of high-quality to integrated
making itand defined
resistant to knock-in lock
• Flat head: Securing brackets, panels, plates,
all components for recessed installation cable ducts and all 3.rotting
Properties
• Connection thread for screwing on pipe clamps, clamps, holders, etc. • Temperature-resistant from – 40 °C to + 150 °C
components for non-recessed installation • Resistant to UV radiation
• Type DS with sealing washer: Securing of laths,
roof flashing, metal sheetsand • For countersinking and leaving protruding
• Countersunk head: Securing squared timber, thin metal sheets • Plastic dowel made of high-quality nylon, making it resistant to
while simultaneously sealing off anchor hole • Countersunk
rotting head design countersinks itself automatically in soft wood
all components for recessed installation
• Halogen-free
• Temperature-resistant from – 40 °C to + 150 °C
• Connection thread for screwing on pipe clamps, clamps, holders, etc.
• Type DS with sealing washer: Securing of roof flashing, metal sheets • For countersinking and leaving protruding
while simultaneously sealing off anchor hole • Countersunk head design countersinks itself automatically in soft wood
• Halogen-free
Setting instructions
Setting instructions
Drill hole Clean drill hole Insert anchor through Knock in expansion
the component into nail until flush
the drill hole
Drill hole Clean drill hole Insert anchor through Knock in expansion
the component into nail until flush
the drill hole
101
W-ND
W-ND NAIL
NAIL ANCHOR
ANCHOR
Performance Data
Anchordiameter [mm] 5 6 8 10
0.64 0.67 1.08 2.02
Recommended
tensile load
Characteristic values
Tightening torque (only Type GEW) T inst [Nm] – 6 6 –
Drill hole depth h1 40 40 50 60
Setting depth hnom 30 30 40 50
Thread dia. (only type GEW) d thr [mm] – 6 8 –
Thread type (only Type GEW) I thr. [mm] – 6 9 –
Nom. drill dia. d 0 [mm] 5 6 8 10
Hole dia. in comp. d f [mm] 5 6 8 10
Anchor Dimensions
Anchor diameter 5 6 8 10
Total length I [mm]
45
40
50
60
70
80
45
60
80
60 100
80 120
95 135
80
50 100
70 120
Max. attachment height t [mm]
20
10
20
40
30
50
20
40
30
x
5 x 45
6 x 70
6 x 40
6 x 50
6 x 60
6 x 80
8 x 45
8 x 60
8 x 80
8 x 100
8 x 120
8 x 135
10 x 80
0906 310 80
1906 318 60
1906 318 80
1906 326 40 200 1906 306 40 1906 316 40
–
1906 308 45
100 –
100 –
50 –
50 –
50 –
Packing unit P. Qty.
100
100
100
100
Mushroom head (Type PK)
(sw/vz)
(sw/vz)
102
W-ZX ®
ZEBRA SHARK W-ZX® Benefits:
• Ensures knotting in all hollow spaces and spreading
in all solid materials.
• Patented anchor head causes knotting of the
anchor shaft when the screw is screwed-in.
• Low screw-in torque and high fixed torque
• The drive-in lock prevents early spreading during
through fastening.
Setting Tool • Fold-down collar translates to suitability for pre
Art. No. : 0906 100 001 fastening and through fastening.
• The twist lock prevents turning in the drill hole.
• The ZEBRA Shark W-ZXR is suitable for all screw
types.
Applications:
Securing coat rails, curtain rails, Technical Data:
wall shelves, light hanging cup- Head configuration All
boards, picture frames, mirrors, Environmental conditions Indoor, Outdoor
Material composition Plastic
lamps, cable ducts, cable clamps,
Type of fastening Pre fastening
electrical switches, wash basins,
Suitable for concrete, solid brick, solid
hand towel rails, signs, motion de-
sand-lime brick, vertically
tectors, hanging baskets. perforated brick, perforated
sand-lime brick, aerated
concrete, gypsum
plasterboard, gypsum
fibrous panels
Fixing characteristics
Article description W-ZX 5 × 28 W-ZX 6 × 35 W-ZX 8 × 46 W-ZX 10 × 56 W-ZX 12 × 66 W-ZX 14 × 76
Art.No. 0906 205 28 0906 206 35 0906 208 46 0906 210 56 0906 212 66 0906 214 76
Drill dia. d0 mm. 5 6 8 10 12 14
Drill hole depth h1 ≥ mm. 40 50 60 75 80 90
Length fixing l mm. 28 35 46 56 66 76
Screw dia. ds mm. 3-4 4-5 4,5-6 6-8 8-10 10-12
Package Unit PU Qty. 200 200 200 100 50
Load characteristics
Concrete C20/C25 Frec kN 0.4 0.8 1.0 1.6 2.2 2.5
Solid bricks Mz12, KS12 Frec kN 0.3 0.5 0.7 1.4 1.7 1.7
Aerated concrete PB2, PP2 Frec kN 0.05 0.1 0.1 0.15 0.2 0.35
Screw length = Length fixing + screw dia. + fixture thickness (+plaster/insulation thickness)
Installation:
103
ZEBRA SHARK W-ZX® 92.1
Proof of performance
Assortment case
ZEBRAShark® Anchor Assortment
Contents: 6 x 36 = 150 pcs.,
6 x 37 = 150 pcs.,
8 x 51 = 75 pcs.,
8 x 52 = 75 pcs.,
10 x 61 = 40 pcs.,
10 x 62 = 40 pcs.,
= 530 pieces.
Art. No. 0964 906 P. Qty. 1
1. Applications
• Can be used with the largest possible screw diameter in solid and 3. Properties
hollow-chamber stone, always enabling strong hold • The universal plug for subordinate securing in nearly all building
• Pre-formed thread in head materials
• Three-part division for form-fitting or frictionally engaged anchoring • In solid and hollow-chamber stone of any kind
• Wings as twist lock in solid or hollow-chamber stone • In gypsum plasterboard sheets, pressboard, wood panels etc.
• For use with stud screws, hooks, ring screws, WÜPOFAST ®, ECOFAST ®
2. Advantages screws and wood screws
• Low screw-in torque of WÜPOFAST ® screw due to pre-formed thread • Fully resistant to rotting, weather and aging
• Twist lock due to locking edge running lengthwise • Temperature-neutral from – 40 °C to +100 °C
• One screw diameter can be used – regardless of application
• In hollow stones/walls, form-fitting results due to knotting together or
bending out of spreading segments
Setting instructions
Surface: Concrete and solid stone Surface: Hollow-chamber stone Surface: Gypsum plasterboard
Drill hole Clean borehole Set anchor in place Screw in screw until Drill hole Set anchor in place Screw in screw Drill hole Set anchor in place Screw in screw
flush until flush until flush
104
ZEBRA SHARK ® ANCHORS
92.1
ZEBRA SHARK W-ZX®
Performance Data
Anchor diameter [mm] 5 6 71) 71) 8 10 12 14
Concrete B25; C20/25 0,2 0,3 0,3 0,3 0,4 1,0 1,1 1,3
Recommended Loads2
Solid stone Mz12; KS12 0,2 0,3 0,3 0,3 0,35 0,4 0,45 0,45
Vertically perforated brick
0,1 0,15 0,15 0,15 0,2 0,25 0,25 0,3
Hlz123)
Perforated sand-lime brick
0,2 0,2 0,2 0,2 0,4 0,4 0,5 0,6
KSL123)
Frecom. [kN]
Aerated concrete PB2; PP2 3) 0,04 0,1 0,12 0,12 0,15 0,2 0,2 0,3
Gypsum plasterboard
0,1 0,1 0,1 0,1 0,1 0,1 0,1 0,1
d 12.5 mm
Gypsum plasterboard
0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15
d 25 mm
Pumice 0,11 0,13 0,15 0,15 0,18 0,23 0,25 0,28
Characteristic values
Screw dia. dscr [mm] 3,5 4,5 5 5 6 7 8 -10 10 -12
Screw length = anchor length + material thickness to be attached + screw dia. + any plaster/insulation thickness
Nom. drill dia. ddrl [mm] 5,0 6 7 7 8 10 12 14
Drill hole depth p [mm] 40 45 45 60 60 70 80 85
Setting dept h hS [mm] 30 36 35 50 51 60 70 75
Hole dia. in comp. dcon. [mm] 5,5 6,5 7,5 7,5 7 10,5 12,5 14,5
Anchor Dimensions
Total length l [in mm]
31
32
36
37
36
37
51
52
51
52
61
62
71
72
75
76
Max. attachment height da [in mm] Depends on screw length
10 x 61
10 x 62
12 x 71
12 x 72
14 x 75
14 x 76
5 x 31
5 x 32
6 x 36
6 x 37
7 x 36
7 x 37
7 x 51
7 x 52
8 x 51
8 x 52
Designation
0906 007 361)
0906 006 36
0906 008 51
0906 010 61
0906 012 71
0906 014 75
Art. No.
ZEBRA Shark® anchors without collars
100 0906 007 371)
25 0906 012 72
20 0906 014 76
Art. No.
ZEBRA Shark® anchors with collars
200
200
100
100
200
100
25
20
Pa c k i n g u n i t P. Qty.
105
W-GB
AIRCRETE ANCHOR W-GB
Suitable for:
AAC, ACC, ALC
Benefits:
•W-GB is in particular developed for AAC, ACC and
ALC to provide highest load capacity.
•Fast installation
Applications:
Facade and roof constructions made Technical Data:
of wood and metal, windows, doors, Head configuration All
brackets, cable ducts, switches, Environmental conditions Indoor, outdoor
Material composition Plastic
lights, fuse boxes, cable clips, pipe Type of fastening Pre fastening
clamps, toilet and washbasin attach- Suitable for Aerated concrete PB2
ments, hanging cabinets, strips, rail-
ings
Fixing characteristics
Article description GB 10 x 55 GB 12 x 60 GB 14 x 75
Art.No. 0903 50 10 0903 50 12 0903 50 14
Drill dia. d0 mm. 10 12 14
Drill hole depth h1 ≥ mm. 65 70 85
Length fixing l mm. 55 60 75
Screw dia. ds mm. 4.5 - 6 7-8 10
Package Unit PU Qty. 25 25
25
Load characteristics
AAC 2 N/mm2 Frec kN 0.3 0.3 0.5
AAC 4 N/mm2 Frec kN 0.6 0.5 1.15
AAC 6 N/mm2 Frec kN - 0.8 -
Installation:
106
PLASTIC CAVITY ANCHOR W-KH
Areas of application:
•For attachments in plates and boards up to 19 mm thick
•For attachment of lightweight rails, sheets, boards, etc.
Advantages:
•The rotation prevention mechanism on the collar prevents the sleeve
from turning in the drilled hole (assuming that the drilled hole
diameter is appropriate)
•The anchor expands in the cavity by itself, thus no setting tool is
required
•The anchor can also be used in solid anchorage materials
Characteristics:
•High-quality polyamide (Nylon)
•For use with a wood screw (Wiipofast) Ø 4-5 mm
•Make sure that the screw is not over-tightened (risk of breakage)
•Tighten screw by hand - Do not use a cordless screw driver
Installation:
107
HEXAGON SHEET-METAL SCREWS Hexagon
Sheet Metal
ScrewsDIN 7976 (ISO 1479)
NominalNominal
dia. d dia.indmm in mm
3.5 3.5 3.9 3.9 4.2
4.2 4.8
4.8 5.5 5.5 6.3 6.38 8 DIN
Shape7976 (ISO
C, with tip 1479)
Galvanized steel,
Head height k mm 2.3 2.3 2.8 3.0 4.0 4.8 5.8 blue passivated (A2K) A2
Head Height
e in mm k5.96 mm 7.59 2.3 7.592.3 2.8
8.71 3.08.71 4.0 10.95
4.8 5.8
14.26 Shape C, with tip
s in mm 5.5 7 7 8 8 10 13
e in mm 5.96 7.59 7.59 8.71 8.71 10.95 14.26
Galvanized steel, blue passivated (A2K)
s in mm 5.5 7 7 8 8 10 13 A2
Nominal length Galv. steel P.Qty. A2 P. Qty.
Dia. d Nominal
l dia. blue pass.
lenght l Galv. steel blue P.Qty. A2, rust proof P.Qty. ORSY 100
ORSY 100Assortment
Assortment
in mm in mm Art. No. Art. No.
d in mm6.5 in 0114
mm 35 pass.
65 Art. No. 3500 Art.No.
9.5 6.50114 35 0114
95 3565 100 0122 35 95
3500
13 0122 35 13
16 9.5 0114 3595 0122
100 0122 35 163595
1000
19 130114 35 19 1000 0122 35 193513
0122
3.5 22 0122 35 22
16 0122 3516
25 0122 35 25 1000
32 19 0114 3519 1000 0122
0122 35 323519
3.5 38 22 0122 35 383522
0122 500
45 0122 35 45
50 25 0122
0122 35 503525
6.5 320114 39 65 1000 0122 3532
9.5 0114 39 95 0122 39 95
38 0122 3538 Includes: 890 sheet-metal screws, DIN 7976,
13 0114 39 13 0122 39 13 500
100 Galvanized steel,
Includes: 890 glue passivated
sheet-metal screws, DIN(A2K)
7976,
16 45 0122
0122 39 163545
and combination
Galvanized steel, sheet metal screws
glue passivated (A2K)
19 0114 39 19 0122 39 19
50 0122 3550 1000 with
andcaptive washer,
combination sheet metal screws
3.9 22 0122 39 22
6.5 0114 3965 1000 galvanized steel, blue
with captive washer, passivated
galvanized (A2K)
steel,
25 0122 39 25
32 9.5 0114 3995 0122 39 323995
0122 blue passivated (A2K)
0114 48 13/19/25
38 0122 39 38
13 0114 3913 0122 3913 0114 63 16/19/22/25/32
45 1000122 39 45 500 0114
0114 8 48 13/19/25
19/25
50 16 0122 39 503916
0122 0114 63516/19/22/25/32
0129 085 13/16
9.5 0114 42 95 0122 42 95 0114 8 19/25
19 0114 3919 0122 3919 0129 086 3 16/20
13 0114 42 13 0122 42 13 1000 0129 085 5 13/16
0122
0129 086 5 16
3.9 16 220114 42 16 100 0122 42 163922 1000 0129 086 3 16/20
0129 088 0 19
19 250114 42 19 0122 42 19
0122 3925 0129 086 5 16
22 0114 42 22 0122 42 22
25 32 0122
0122 42 253932 Art.
0129No.
088 00964
19 129 01
4.2
32 38 0122 42 323938
0122
38 0122 42 38
45 45 0122
0122 42 453945 500 Art.No. 0964 12901
500
50 50 0122
0122 42 503950
60 0122 42 60
9.5 0114 4295 0122 4295
70 0122 42 70
9.5 130114 48 0114
95 4213 2500 0122 4213
13 160114 48 0114
13 4216 1000122 48 134216
0122 1000
1000
16 0114 48 16 0122 48 16
19 190114 48 0114
19 4219 0122
0122 48 194219 100
100
22 220114 48 0114
22 4222 0122 48 224222
0122
25 0114 48 25 0122 48 25 1000
25 0122 4225
4.2 32 0114 48 32 0122 48 32
38 32 0122
0122 48 384232 500
4.8 45 38 0122 48 454238
0122 200
50 0122 48 50
55 45 0122
0122 48 554245 250
500
60 500114 48 60 1000 0122 48 60
0122 4250
70 0122 48 70
MWF - 01/08 - 03381 - © •
80 60 0122
0122 48 804260
200
90 70 0122 48 904270
0122
100 0122 48 100
110 0122 48 110
108
HEXAGON SHEET-METAL SCREWS
Nominal dia. lenght l Galv. steel blue P.Qty. A2, rust proof P.Qty.
d in mm in mm pass. Art. No. Art.No.
9.5 0114 4895 2500
13 0114 4813 0122 4813
1000
16 0114 4816 0122 4816
19 0114 4819 0122 4819 100
100
22 0114 4822 0122 4822
25 0114 4825 0122 4825 1000
32 0114 4832 0122 4832
38 0122 4838 500
4.8 45 0122 4845
200
50 0122 4850
55 0122 4855 250
60 0114 4860 1000 0122 4860
70 0122 4870
80 0122 4880
200
90 0122 4890
100 0122 48100
110 0122 48110
13 0114 5513 0122 5513
16 0114 5516 0122 5516
19 0114 5519 0122 5519
22 0114 5522 100 0122 5522 500
25 0114 5525 0122 5525
32 0114 5532 0122 5532
38 0122 5538
5.5 45 0122 5545
100
50 0122 5550
60 0122 5560 500
70 0122 5570
80 0122 5580
90 0122 5590 100
100 0122 55100
110 0122 55110
109
HEXAGON SHEET-METAL SCREWS
Nominal dia. lenght l Galv. steel blue P.Qty. A2, rust proof P.Qty.
d in mm in mm pass. Art. No. Art.No.
9.5 0114 6395 1000
13 0114 6313 0122 6313
16 0114 6316 0122 6316
19 0114 6319 0122 6319 500
22 0114 6322 0122 6322
25 0114 6325 0122 6325
32 0114 6332 100 0122 6332 100
38 0114 6338 0122 6338 500
6.3 45 0114 6345 0122 6345
200
50 0114 6350 0122 6350
55 0122 6355 100
60 0114 6360 0122 6360 200
70 0114 6370 250 0122 6370
80 0122 6380
90 0114 6390 100 0122 6390 100
100 0122 63100
110 0122 63110
16 0114 816 0122 816
19 0114 819 0122 819
100 200
22 0114 822 0122 822
25 0114 825 0122 825
32 0114 832 250 0122 832
8.0 38 0114 838 100 0122 838
45 0122 845
100
50 0114 850 0122 850
60 500 0122 860
70 0114 870 0122 870
80 0114 880 250
110
SHEET METAL SCREWS
Nominal dia. d in mm 2.2 2.9 3.5 3.9 4.2 4.8 5.5 6.3 A2 , rust proof
Head dia. d in mm 4.2 5.6 6.9 7.5 8.2 9.5 10.8 12.5 A4, rust proof
Head heigth k in mm 1.8 2.2 2.6 2.8 3.05 3.55 3.95 4.55
Drive H1 H1 H2 H2 H2 H2 H3 H3
Nominal lenght Galv. steel P.Qty. Steel, black P.Qty. A2, rust P.Qty. A4, rust P.Qty.
dia. d l in mm blue pass. galvanised proof proof
in mm Art. No. Art.No. Art.No. Art.No.
6.5 0115 2265 0134 2265 0119 2265
300/ 1000
9.5 0115 2295 0134 2295 0119 2295 2000
1000
13 0115 2213 0134 2213 5000 0119 2213 0127 12213
16 0115 2216 200 0119 2216 0127 12216
2.2
19 0119 2219 0127 12219
22 0119 2222 1000 0127 12222
25 0119 2225 0127 12225
32 0119 2232 0127 12232
6.5 0115 2965 0134 2965 2000 0119 2965 0127 12965
300/
9.5 0115 2995 0134 2995 0119 2995 0127 12995
1000
13 0115 2913 0134 2995 0119 2913 300/100 0127 12913
16 0115 2916 0134 2916 0119 2916 0127 12916
100/ 100/1000
2.9 19 0115 2919 0134 2919 0119 2919 0127 12919
1000 1000
22 0115 2922 0134 2922 0119 2922 300 0127 12922
25 0115 2925 300/1000 0134 2925 0119 2925 300/1000 0127 12925
32 0127 12932
38 0119 2938 1000 0127 12938
6.5 0115 3565 0119 3565 0127 13565
9.5 0115 3595 0134 3595 100/1000 0119 3595 0127 13595
13 0115 3513 100/300/ 0134 3513 0119 3513 0127 13513
100/300/ 300/1000
16 0115 3516 1000 0134 3516 0119 3516 0127 13516
1000
19 0115 3519 0134 3519 0119 3519 0127 13519
22 0115 3522 0134 3522 100 0119 3522 0127 13522
3.5
25 0115 3525 0134 3525 100/1000 0119 3525 0127 13525
100/1000 100/1000
32 0115 3532 0119 3532 0127 13532
500
38 0115 3538 0119 3538 100 0127 13538
45 0115 3545 100 0119 3545
1000
50 0115 3550 0119 3550
70 0119 3570 500
111
SHEET METAL SCREWS
Nominal lenght Galv. steel P.Qty. Steel, black P.Qty. A2, rust P.Qty. A4, rust P.Qty.
dia. d l in mm blue pass. galvanised proof proof
in mm Art. No. Art.No. Art.No. Art.No.
6.5 0115 3965 0134 3965 1000 0127 13965
9.5 0115 3995 0134 3995 100/300/1000 0119 3995 0127 13995
100/300/
13 0115 3913 0134 3913 0119 3913 0127 13913
1000 300/1000
16 0115 3916 0134 3916 100/1000 0119 3916 0127 13916 1000
19 0115 3919 0134 3919 0119 3919 0127 13919
22 0115 3922 0134 3922 0119 3922 0127 13922
25 0115 3925 100/ 0134 3925 100 0119 3925 0127 13925
3.9
32 0115 3932 1000 0134 3932 0119 3932 100/1000 0127 13932
38 0115 3938 0119 3938 0127 13938
45 0115 3945 0119 3945 0127 13945
50 0115 3950 0119 3950 0127 13950 500
100
60 0115 3960 0119 3960 500
70 0115 3970 0119 3970 0127 13970
80 0119 3980 0127 13980
6.5 0115 4265 1000 0119 42659 1000 0127 14265 100
9.5 0115 4295 0134 4295 0119 4295 0127 14295
13 0115 4213 0134 4213 100/300/ 0119 4213 0127 14213
100/300/
16 0115 4216 0134 4216 1000 0119 4216 300/1000 0127 14216
1000 1000
19 0115 4219 0134 4219 0119 4219 0127 14219
22 0115 4222 0134 4222 100/1000 0119 4222 0127 14222
25 0115 4225 0134 4225 100/300/1000 0119 4225 0127 14225
100/1000
32 0115 4232 0134 4232 100 0119 4232 0127 14232
35 0115 4235 1000
4.2 100/1000
38 0115 4238 0134 4238 100/300 0119 4238 0127 14238
45 0115 4245 100/1000 0119 4245 0127 14245 500
50 0115 4250 0134 4250 0119 4250 0127 14250
55 100 0119 4255
60 0115 4260 0134 4260 0119 4260 0127 14260
100
70 0115 4270 0119 4270
500
80 0115 4280 500 0119 4280
90 0119 4290
100 0119 42100
112
SHEET METAL SCREWS
Nominal lenght Galv. steel P.Qty. Steel, black P.Qty. A2, rust P.Qty. A4, rust P.Qty.
dia. d l in mm blue pass. galvanised proof proof
in mm Art. No. Art.No. Art.No. Art.No.
9.5 0115 4895 100/100 0134 4895 100 0119 4895 100/1000 0127 14895
13 0115 4813 0134 4813 100/300/ 0119 4813 0127 14813
100/300/
16 0115 4816 0134 4816 1000 0119 4816 300/1000 0127 14816
1000 500
19 0115 4819 0134 4819 0119 4819 0127 14819
22 0115 4822 0134 4822 100/1000 0119 4822 0127 14822
25 0115 4825 100/1000 0134 4825 0119 4825 100/1000 0127 14825
32 0115 4832 0134 4832 0119 4832 0127 14832
100
38 0115 4838 0134 4838 0119 4838 0127 14838
40 0134 4840 500
100/500 100/500
0115 4845 0119 4845 0127 14845
Sheet Metal
45
4.8
50 0115 4850 0134 4850 500 0119 4850 0127 14850
Screws
55 0119 4855 200 200
60 0115 4860 0134 4860 1000 0119 4860 0127 14860
65 0115 4865 100/500
acc. to DIN 7981 (ISO 7049)
70 0115 4870 0119 4870 0127 14870
Tallow-drop head
80 head 0115
with Phillips H, 4880 100 0119 4880 0127 14880
shape C, with
90 tip 0115 4890 0119 4890 100 0127 14890
Galvanised100 0115passivated
steel, blue 48100 (A2K) 0119 48100
Steel, black110
galvanised
0115 (A2S)
48110
6.3 A2 prruoostf 120 0115 48120 0119 48120 200
2.5 A4 prruoostf
4.55
H3 ORSY100
ORSY Assortments
100 Assortment
Contents: 1775 Sheet-Metal Screws DIN 7981, Contents: 1500 Sheet-Metal Screws
P. Qty.
steel, black galvanised (A2S) DIN 7981/7983, galvanised steel,
0134 29 9.5/13 blue passivated (A2K)
0134 35 9.5/13/16/19 0115 35 9.5/13/16 0117 35 13/16/19
0134 39 13/16/19 0115 42 13/16/19 0117 42 16/19/22
0134 42 9.5/13/16/19/25 0115 48 16/19/22 0117 48 19/22/25
0134 48 16/19
0134 55 16/25
Art. No. 0964 Art.No. 0964 115 117
114
SHEET METAL SCREWS
P. Qty.
ORSY 200 Assortments
ORSY200 Assortments
100
1000
500
200
100
200
100
115
SHEET METAL SCREWS
Sheet Metal
According to DIN 7982 (ISO 7050)
Screws
according to DIN 7982 (ISO
7050)
Countersunk head with Phillips head H,
Shape C, with tip
Nominal dia. d in mm 2.2 2.9 3.5 3.9 4.2 4.8 5.5
6.3 Galvanized steel, blue passivated (A2K)
Nominal
Head dia.dia.
dk d inmm
mm 6.3
4.3 2.2
5.5 2.96.8 3.5 7.5 3.9 8.1 4.2 9.54.8 5.5
10.8 Countersunk
Steel, yellowhead
12.4 with Phillips
galvanized (A2C)
head H, Shape C, with tip
Head height
Head dia. k mm
d in mm 1.3
4.3 1.7
5.5 6.82.1 7.5 2.3 8.1 2.59.5 3.010.8 3.4
12.4 3,8A2
Drive H1 H1 H2 H2 H2 H2 H3 H3 Galvanized
A4 steel, blue passivated (A2K)
Head heigth k in mm 1.3 1.7 2.1 2.3 2.5 3.0 3.4 3.8 Steel, yellow galvanized (A2C)
Drive length
Nominal Galv. steel P.Qty.H1 H1yellow
Steel, H2
P. Qty. H2
A2 H2 P. Qty.H2 A4 H3 H3
P. Qty.
ORSY100
A2 A4
Assortments
Dia. d l blue pass. galvanized
in mm in mm Art. No. Art. No. Art. No. Art. No.
6.5 0116 22 65 100/1000 0123 22 65 0127 222 65
Nominal 9.5
lenght
0116 22 95
Galv.
100
steel P.Qty. Steel,0123
black
22 95
P.Qty. A2
0127 222 95
P.Qty. A4 P.Qty.
dia. d13 l in mm blue pass. galvanised
0123 22 13 Art.No.
0127 222 13 Art.No.
16 0116 22 16 1000 0123 22 16 0127 222 16
in mm19
2.2 Art. No. Art.No.
0123 22 19 1000 0127 222 19
22 6.5 0116 2265 100/1000 0123 22 22 0123 2265
0127 222 22 0127 22265
25 0123 22 25 0127 222 25
32 9.5 0116 2295 100 0123 22 32 0123 2295
0127 222 32 0127 22295
6.5 0116 29 65 0116 029 65 2000 0123 29 65 1000 0127 229 65
9.5
130116 29 95 100/1000
0123 29 95
0123 2213
0127 229 95
0127 22213
13 160116 29 13 0116 2216
300/1000 1000 0123 29 13
300/1000 0123
0127 229 13 2216
1000 0127 22216
2.2 16 0116 29 16 100/1000 0123 29 16 0127 229 16 1000
Includes: 1,400 sheet metal screws, DIN
2.9 19 190116 29 19 300/1000 0123 29 19 0123
0127 229 19 2219 0127 22219
7982,
22 0116 29 22 0123 29 22 0127 229 22
25
220116 29 25
100/1000
0123 29 25
300 0123 2222
0127 229 25
Galvanized steel,
0127 blue passivated (A2K)
22222
0116 35 13/16/19/25
32 250116 29 32 1000 0123 29 32 0123 2225 0127 22225
38 0123 29 38 1000 0127 229 38 0116 39 19/22/25/32/38
6.5 32 0123 35 65 0123 2232
0127 235 65 0116 42 16/19/25/32/38
0127 22232
9.5 0116 35 95 0116 035 95 1000 0123 35 95 0127 235 95 0116 48 32/50
13
6.5
0116 35 13
0116 2965 0116 0123
0296535 13
2000 0123 2965
0127 235 13
1000 0127 22965
100/1000 300/1000
16
19
9.50116 35 16 0116
0116 35 19
2995
300/1000 0123 35 16
0123 35 19
0123 2995
0127 235 16
0127 235 19
Art. No. 0127
0964 116
22995
22 130116 35 22 0116 2913 300/1000 0123 35 22 300 0123 2913
0127 235 22 0127 22913
3.5 25 0116 35 25 0123 35 25 0127 235 25 Includes:
300/10001350 sheet metal screws, DIN 7982,
32
160116 35 32
0116 2916
100/1000
100/1000 0123 35 32 100/1000
0123 2916
0127 235 32
0127 22916
A2 stainless steel
1000
2.9 38 190116 35 38 0116 2919 300/100 0123 35 38 0123 2919
0127 235 38 0123 35 13/16/22
0127 22919
45 0123 35 45 1000 0127 235 45 500 0123 39 13/16/19/22/25
50 22 0116 2922 0123 35 50 100/1000 0123 2922
0127 235 50 0127 22922
0123 42 16/19/25/32/38/45/50/60
60 100/1000 0123 35 60 0127 235 60 300
0116 2925 0123 2925
70
25 0123 35 70 1000 0127 235 70 Art. No. 0127
0964 22925
123
6.5 32 0116 2932 1000 0123 39 65 0123 2932
0127 239 65
9.5 0116 39 95 0123 39 95 0127 239 95
13 380116 39 13 300/1000 0116 039 13 0123 39 13 0123 2938
0127 239 13 1000 0127 22938
16 0116 39 16 0123 39 16 300/1000 0127 239 16 1000
19
6.50116 39 19 100/1000 0116 039 19 0123 39 19
0123 3565
0127 239 19
0127 23565
22 9.50116 39 22 0116 3595
300/1000 0116 039 22 10000116 0123
0359539 22 1000 0123 3595
0127 239 22 0127 23595
25 0116 39 25 0116 039 25 0123 39 25 0127 239 25
3.9 130116 39 0116 3513 0123 3513 0127 23513
32 32 0116 039 32 0123 39 32 100/1000 0127 239 32
38 0116 39 38 100/1000 0116 039 38 0123 39 38 0127 239 38 300/1000
45
160116 39 45
0116 3516 300/1000 0123 39 45 250/1000
0123
0127 239 45
5003516 0127 23516
50 190116 39 50 0116 3519 0123 39 50 0123 3519
0127 239 50 0127 23519
55 0123 39 55
500
60 22 0116 3522 0123 39 60 0123 3522 300 0127 23522
70 0123 39 70
3.5 25 0116 3525 0123 3525 0127 23525
32 0116 3532 100/1000 0123 3532 100/1000 0127 23532
38 0116 3538 0123 3538 0127 23538
MWF - 01/06 - 02639 - © •
Nominal lenght Galv. steel P.Qty. A2, rust P.Qty. A4, rust P.Qty.
dia. d l in mm blue pass. proof proof
in mm Art. No. Art.No. Art.No.
9.5 0116 4295 100/1000 0123 4295 0127 24295
13 0116 4213 0123 4213 0127 24213
16 0116 4216 300/1000 0123 4216 300/1000 0127 24216
1000
19 0116 4219 0123 4219 0127 24219
22 0116 4222 0123 4222 0127 24222
25 0116 4225 0123 4225 0127 24225
32 0116 4232 0123 4232 0127 24232
4.2 100/1000
38 0116 4238 0123 4238 100/1000 0127 24238
45 0116 4245 0123 4245 0127 24245
50 0116 4250 0123 4250 0127 24250 500
55 0127 24255
60 0116 4260 100 0123 4260 0127 24260
70 0116 4270 100/500 0123 4270 500 0127 24270
90 0123 4290
117
SHEET METAL SCREWS
Nominal lenght Galv. steel P.Qty. A2, rust P.Qty. A4, rust P.Qty.
dia. d l in mm blue pass. proof proof
in mm Art. No. Art.No. Art.No.
9.5 0116 4895 100 0123 4895 500 0127 24895
13 0116 4813 100/1000 0123 4813 0127 24813
16 0116 4816 300/1000 0123 4816 300/1000 0127 24816
500
19 0116 4819 0123 4819 0127 24819
22 0116 4822 0123 4822 0127 24822
100/1000
25 0116 4825 0123 4825 100/1000 0127 24825
32 0116 4832 0123 4832 0127 24832
38 0116 4838 0123 4838 0127 24838
45 0116 4845 0123 4845 0127 24845
4.8
50 0116 4850 100/500 0123 4850 0127 24850
100/500
55 0123 4855
200
60 0116 4860 0123 4860 0127 24860
70 0116 4870 0123 4870 0127 24870
80 0116 4880 0123 4880 0127 24880
90 0116 4890 0123 4890 100 0127 24890
100
100 0116 48100 0123 48100 0127 248100
110 0116 48110
120 0116 48120 0123 48120 200
13 0116 5513 0123 5513 0127 25513
16 0116 5516 0123 5516 0127 25516
19 0116 5519 100 0123 5519 100 0127 25519 200
22 0116 5522 0123 5522 0127 25522
25 0116 5525 0123 5525 0127 25525
32 0116 5532 0123 5532 0127 25532
100/500 100/500
38 0116 5538 0123 5538 0127 25538
45 0116 5545 0123 5545 0127 25545
100
5.5 50 0116 5550 0123 5550 0127 25550
55 0123 5555 200
100
60 0116 5560 0123 5560 0127 25560
70 0116 5570 0123 5570 0127 25570
100
80 0116 5580 0123 5580 0127 25580
90 0116 5590 0123 5590 100 0127 25590
100 0116 55100 0123 55100 0127 255100
110 0116 55110
120 0116 55120 0123 55120
118
SHEET METAL SCREWS
Nominal lenght Galv. steel P.Qty. A2, rust P.Qty. A4, rust P.Qty.
dia. d l in mm blue pass. proof proof
in mm Art. No. Art.No. Art.No.
13 0123 6313 200 0127 26313
16 0116 6316 0123 6316 0127 26316
19 0116 6319 100 0123 6319 0127 26319 200
22 0116 6322 0127 26322
25 0116 6325 0123 6325 0127 26325
32 0116 6332 0123 6332 0127 26332
Sheet Metal 38
45
0116 6338
0116 6345
100/500
0123 6338
0123 6345 100
0127 26338
0127 26345
Screws
6.3
50 0116 6350 0123 6350 0127 26350
60 0116 6360 0123 6360 0127 26360 100
70 0116 6370 0123 6370 0127 26370
according
80
to DIN 7982 (ISO
0116 6380 0123 6380 0127 26380
7050) 90 0116 6390 100 0123 6390 0127 26390
Countersunk 100head0116
with63100
Phillips head H, 0123 63100 0127 263100
Shape C, with tip
5.5 110 0116 63110
Galvanized steel, blue passivated (A2K)
120 0116 63120
Steel, yellow galvanized (A2C)
8 12.4
4 3,8A2
A4
ORSY100 Assortments
ORSY100 Assortments
Qty.
00
Includes: 1,400 sheet metal screws, DIN
7982,
Includes: 1,400
Galvanized sheet
steel, bluemetal screws, DIN
passivated 7982,
(A2K) Includes: 1350 sheet metal screws, DIN 7982,
0116 35 13/16/19/25
Galvanized steel, blue passivated (A2K) A2 stainless steel
0116
0116393519/22/25/32/38
13/16/19/25 0123 35 13/16/22
0116
0116423916/19/25/32/38
19/22/25/32/38 0123 39 13/16/19/22/25
0116
0116484232/50
16/19/25/32/38 0123 42 16/19/25/32/38/45/50/60
0116 48 32/50
Art. No. 0964 116
Art.No.
Includes: 13500964
sheet 116
metal screws, DIN 7982, Art.No. 0964 123
A2 stainless steel
0123 35 13/16/22
0 0123 39 13/16/19/22/25
0123 42 16/19/25/32/38/45/50/60
Art. No. 0964 123
00
119
0
W-DN CEILING NAIL
33.1
W-DN CEILING NAIL
Multiple attachment of non-
load-bearing systems:
Cracked and uncracked concrete
Galvanized steel
Performance facts
Approvals
European Fire resistance 2. Advantages
Technical Approval • Through-bolt mounting
Technical Report
Multiple attachment of
non-load-bearing systems
TR 020 • Low drilled hole depth
R30 - R120
in concrete • Small drilled hole diameter
• Can be loaded immediately – no waiting times
• Easy setting: Knock in projecting pin with hammer until ush
• No special drilling or setting tools required
3. Features
1. Applications • Anchoring via friction engagement – path-controlled spreading anchor
• Multiple attachment of non-load-bearing systems: Anchorage with • Approval:
European Technical Approval in cracked concrete (concrete tensile Multiple attachment of non-load-bearing systems in
zone) and in uncracked concrete (concrete pressure zone) concrete:
• Suitable for fastening: Light ceiling cladding and suspended European Technical Approval ETA-12/0029
ceilings, metal proles, perforated metal tapes, wire suspension brackets, • Dimensioned in accordance with the "Guideline for European Technical
Nonius hangers, wood moldings, wood laths, squared lumber etc. Approval (ETAG) of Metal Anchors for Use in Concrete", Appendix C,
• With European Technical Approval, the anchor may be used in Measurement Process C
reinforced or non-reinforced standard concrete of a strength class of • Fire resistance:
at least C20/25 and at most C50/60 in accordance with EN 206- R30, R60, R90, R120 (anchoring base concrete C20/25 to
1:2000-12 C50/60): Technical Report TR 020 "Evaluation of Anchorages in
• The anchor may be used for anchoring under primarily static loads or Concrete with Regard to Fire Resistance" (contained in ETA-12/0029)
quasi-static loads
• W-DN (galvanized steel) may only be used in the conditions of dry
inside rooms
Setting instructions
MWF - 06/12 - 13167 - ©
120
W-DN CEILING NAIL
121
W-MH
W-MH METAL
METAL HOLLOW-WALL
HOLLOW-WALL ANCHOR
ANCHOR 61
Proof of performance
Setting instructions
MWF - 01/12 - 04310 - ©
Drill hole Set anchor in place Expand anchor fully Secure part
with pliers
122
W-MHMETAL
W-MH METAL HOLLOW-WALL
HOLLOW-WALL ANCHOR
ANCHOR
61
Performance data
Anchor diameter [mm] M4 M5 M6 M8
Gypsum plasterboard d ≥ 12 mm Frecom. [kN] 0.20 0.20 0.20 0.20
Recommended
Characteristic values
Anchor length Anchor length Anchor length Anchor length
Drill hole depth t ≥ [mm] + 5 mm + 5 mm + 5 mm + 5 mm
Thread dia. dthr [mm] M4 M5 M6 M8
Nom. drill dia. ddrl [mm] 8.0 10.0 12.0 13.0
Hole dia. in comp. dcom [mm] 5 6 7 9
Designation
Art. No.
0903 543 2
Galvanized Steel
Fillister Head Screw
–
–
–
–
–
–
–
–
–
0903 528 56
0903 528 69
0903 528 85
Art. No.
Galvanized Steel
Hexagon Head Bolt
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0903 528 55
0903 528 68
0903 528 84
Art. No.
Galvanized Steel
Threaded Rod, Washer, Hexagon Nut
–
–
–
–
–
–
–
–
–
–
0903 526 54 –
0903 526 67 –
–
–
–
–
–
–
–
Art. No.
Galvanized Steel
Eye Bolt
–
–
–
–
–
–
–
–
–
100 0903 526 53 –
–
–
–
–
–
–
–
–
–
–
Art. No.
Galvanized Steel
Screw Hook
* Short screw hook for optimum attachment of hanging cabinett
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
100 –
–
–
–
–
–
–
50
50
50
50
50
50
1 Safety factor 3.
2 Test report No. 32540301-1-CM must be heeded.
123
W-GS
W-GS GYPSUM
Gypsum PLASTERBOARD
Plasterboard ANCHORS
Fixing W-GS 73
Type Z
Benefits:
W-GS/Z diecast zinc
Diecast zinc • Less space required behind the board
(only 15 mm)
Type Z/L • For use without a setting tool with a
Diecast zinc, long battery-powered screwdriver and appropriate bit
W-GS/ZL diecast zinc large for the respective screw.
Type K • The new centering tip enables easy starting and
Plastic drilling into the board.
• Inexpensive, fast installation without pre-drilling.
W-GS/K plastic Product Range Case • Fast installation with a battery-powered
screwdriver.
Performance facts
Applications:
1. Applications Product Range Case
• For secondary attachments in gypsum plasterboards/brous panels Range of W-GS Gypsum Plasterboard Technical Data:
and light building boards Anchors
• For the attachment of components in conjunction with a wood or
Contents: Head configuration All
Anchors: 100 pcs. 14.5 x 33 mm plastic,
particle board screw (no drill tip, counter thread, ring thread) 100 pcs. 14.5 x 33 mm diecast zinc Environmental conditions Indoor, dry conditions
Screws: 200 pcs. 4.5 x 35 mm
• Can be used outside or in rooms subject to moisture in conjunction with + 1 pc. ZEBRA® Screwdriver Material composition diecast zinc /plastic
a stainless-steel screw Art. No. 0613 253 2 = 401 parts.
Art. No. 0964 903 250 Type of fastening Pre fastening
• We recommend using type Z/L for double-planked boards
• Recommended universal bit mount:
Suitable for Gypsum plasterboard
Bit MountFor
withattachments
quick-action chuckin– Art.
gypsum plasterboards/fibrous
No. 0614 176 711 •panels
The gypsum and light boards;
plasterboard anchor and the screw can be inserted with
Universal Mount – Art. No. 0614 176 708 the same bit
for use with wood and chipboard screw.
• The new centering tip enables easy starting and drilling into the board
2. Advantages • Inexpensive, fast installation without pre-drilling
• The patented drive enables setting of an anchor with a PZ bit, AW • Fast installation with a battery-powered screwdriver
bit or Torx bit, as the power transmission takes place via the hexagon • The component can be secured with wood or particle board screws
(Detail 1) (type Z + type Z/L = screw dia. of 4.5 mm/type K = screw dia. of 4.5 –
• The patented twist lock is triggered by screwing in a screw. When 5 mm)
unscrewing the screw, the gypsum plasterboard plug does not turn
back and remains in the anchoring base (Detail 2) 3. Properties
• Less space required behind the board (only 15 mm) • High plastic or diecast zinc quality
Fixing
• For use without a settingcharacteristics
tool with a battery-powered screwdriver and • Temperature-neutral from -40°C to +80°C
appropriate bit for the respective screw • Form-
W-GS ttingType
fastening
Z W-GS Type Z/L W-GS Type K
Article description
Art.No. 0903 2521 0903 2521 0903 2511
Setting instructions
Through - hole in fixture df≤ mm 6.5 6.5 6.5
Minimum bore thickness d≥ mm 9 9 9
Length fixing l mm 33 39 33
Screw dia. ds mm 4.5 4.5 4.5 - 5
Press anchor tips Screw in anchor Fit the component Detail 1: Detail 2:
into attachment
Package until
Unit flush
PUThe patented drive enables setting with
PZ bit, AW bitQty. 200
Patented twist lock
200
surface or Torx bit
200
Load characteristics
Gypsum plasterboard - 12.5 mm Nrec kN 0.1 0.1 0.1
Tension Gypsum plasterboard - 25 mm Nrec kN 0.1 0.12 0.1
Gypsum fibrous panels Nrec kN 0.12 0.12 -
Gypsum plasterboard - 12.5 mm Vrec kN 0.12 0.12 0.12
Shear Gypsum plasterboard - 25 mm Vrec kN 0.15 0.15 0.12
Gypsum fibrous panels Vrec kN 0.15 0.15 -
Installation:
124
INSULATION
ANCHORS
MetalINSULATION
METAL InsulatIon anchor
ANCHOR W-MDD
W-MDD 83
W-MDD
Plate dia. 35
Additional plate dia. 80
Hot-galvanized steel
W-MDD R
Plate dia. 35
Additional plate dia. 80
Stainless steel
Proof of performance
Approvals
General
construction approval
2. Advantages
• Permissible loads under fire load R30; R60; R90; R120.
• Tested fire resistance
• With soft, non-self-supporting insulation materials, the insulation
plate is simply pushed onto the insulation anchor.
• Available in hot-galvanized and stainless versions
3. Features
• Multiple attachment
Setting instructions
MWF - 08/16 - 19799 - ©
Produce the drill hole Remove drilling dust Set anchor in place Knock in the anchor
from the drilling hole until flush
126
Metal
METAL InsulatIon
INSULATION anchor
ANCHOR W-MDD
W-MDD 83
Performance data
Anchor diameter (mm) 8
Permissible load in concrete Fperm [kN] ≥ C20/25 - C50/601) 0.074
Max. weight/plate in concrete (for 4 anchors) (kg) 29.64)
R30; Fperm [kN]2) 0.07
R60; Fperm [kN]2) 0.07
Perm. loading under fire load2)
R90; Fperm [kN]2) 0.07
R120; Fperm [kN]2) 0.06
Center distance R30–R120 Scr, fi (mm)3) 160
Edge distance R30–R120 Ccr, fi (mm)3) 80
1) permissible loading permF = FRD/ΥRD with ΥRD = 1.35
2) Under fire load, the partial safety factor for the loading capacity ΥM, fi is at least 1.0
3) If the fire load attacks from more than one side, the edge distance must be ≥300 mm.
4) 29.6 kg corresponds to 0.296 kN
127
LTX-10
W-LTX10 Universal hammer driven fastener Universal hammer
with plastic pin - driven fastener with
short expansion
expansion zone
plastic pin - short
zone
Description
Universal fastener for fixing polystyrene
A B C D E
Concrete Solid clay bricks, Porous blocks Elements on LAC Autoclaved aerate
Calcium silicate lightweight concrete
bricks aggregate
NEW IMPROVED
Owing to the new design of the expansion zone
DESIGN
the fastener can be installed in all substrate
embedment of
categories while maintaining its high strength
30 and 50 mm.
parameters
32128
universal hammer driven fastener with plastic pin - short expansion zone
W-LTX10 Universal hammer driven fastener with plastic pin - short
expansion zone
Product marking
PRODUCT RANGE
TE CHNICAL DATA
129
LTX-10
W-LTX10 Universal hammer driven fastener with
Universal hammer driven fastener with plastic pin - short
plastic pin - short expansion zone
expansion zone
130
W-De
W-DE InsulatIon
INSULATION anchor
ANCHOR
W-DE
Disk dia. 60 mm
Proof of Performance
Approvals
European 1. Applications 2. Advantages
Technical • The anchor may be used with a • Pass-through mounting
Approval European Technical Approval for • Long spreading zone area for secure hold even in difficult
Plastic anchor for fastening
outside compound thermal fastening outside compound thermal surfaces
insulation systems with
insulation systems in concrete, solid • Setting flush with surface
plaster protection in
• Special head steel prevents heat loss and protects steel nail
concrete and masonry. stone and in hollow or perforated
against corrosion
aerated concrete bricks. • Special nail with profiling for higher holding loads
The respective WETA approval must • Preassembled low installation effort
always be taken into account. • Holding plate offers a surface that grips into mortar and serves
as a plaster carrier
3. Features
131
W-De
W-DE InsulatIon
INSULATION anchor
ANCHOR
W-DE
Disk dia. 60 mm
Proof of Performance
Approvals
European 1. Applications 2. Advantages
Technical • The anchor may be used with a • Pass-through mounting
Approval European Technical Approval for • Long spreading zone area for secure hold even in difficult
Plastic anchor for fastening
outside compound thermal fastening outside compound thermal surfaces
insulation systems with
insulation systems in concrete, solid • Setting flush with surface
plaster protection in
• Special head steel prevents heat loss and protects steel nail
concrete and masonry. stone and in hollow or perforated
against corrosion
aerated concrete bricks. • Special nail with profiling for higher holding loads
The respective WETA approval must • Preassembled low installation effort
always be taken into account. • Holding plate offers a surface that grips into mortar and serves
as a plaster carrier
3. Features
132
W-DE
W-DeINSULATION
InsulatIonANCHOR
anchor
80
1) W hen ta king a tolera nce of 1 0 mm into a ccount (e.g. for insula ting ma teria l a dhesive). W ith old buildings, a ny la yer of pla ster still existing can result in a reduction in the maximum insulating material thickness.
The respective local building situation must always be taken into account.
Performance data:
B r i ck ty p e R a w d e n s i ty cl a s s Central tensile load Point-related Plate
[kg/dm³] N perm [kN] average heat stiffness
transition [kN/mm]
coefficient (CHI
value)
[W/K]
Concrete C12/15 > 1.8 1.2
Concrete C16/20 – C50/60 > 2.3 1.5
Solid sand-lime brick, KS,
>2 1.5
e.g. according to DIN V 106/EN 771-2
Clay brick, Mz,
>2 1.5
e.g. according to DIN 105-100/EN 771-1
Vertically perforated brick, HLz,
e.g. according to DIN 105-100/EN 771-1 > 1.2 0.75
Outside bar thickness 12 mm
Perforated sand-lime brick, KSL,
e.g. according to DIN V 106/EN 771-2 > 1.6 0.9 0.002 1.24
Outside bar thickness 22 mm
Light concrete hollow block,
e.g. according to DIN 18151-100/EN
> 0.8 0.75
771-3
1K Hbl 2-0.8-12, 495x175x248
Light weight concrete blocks LAC EN 771-3 > 1.05 0.9
Auto cloved aerated concrete AAC2 EN771-4 > 0.35 0.6
Auto cloved aerated concrete AAC2 EN771-4 > 0.65 1.2
133
BITS AND INSTALLATION
ACCESSORIES
MWF - 08/14 - 04444 - ©
136
DELIVERY OVERVIEW OF PHILLIPS-HEAD BITS AND PZ/SLOTTED BITS
PH and PZ bits PZ/slotted
Threaded Self-tapping High-speed Wood Particle PZ Phillips Phillips Phillips Phillips Phillips Phillips Phillips Phillips
Phillips for Phillips for Phillips for Phillips for Phillips Phillips Phillips bits
screws, PH screws construction screws/ board head head head head head head head head MSVW 1 MSVW 2 MSVM 2 S50-TB head for screw for screw
(pias) screws, PH Anchor screws/ Magazine Magazine Magazine Magazine Würth
Sheet-metal screws, PZ Self-tapping AEG Würth Würth Würth Attachment Attachment Attachment Screw Würth connection connection Bosch
screws, PH wood PH Fein Bosch Bosch Bosch Attachment Fein devices devices Skil
screws, PZ Kress Skil Skil Skil Würth Würth Makita Würth Baier Optimized Ingersoll
Metabo Ingersoll Ingersoll Ingersoll Bosch Bosch Kress AEG shape with Hitachi
Bosch Hitachi Hitachi Hitachi Eibenstock undersize/ Black &
Holz-Her Black & Black & Black & minus Decker
Decker Decker Decker tolerances AEG
AEG AEG AEG Metabo
Metabo Metabo Metabo Makita
DIN 7985 DIN 7981 Makita Makita Makita Deprag
Deprag Deprag Deprag Atlas-Copco
Atlas-Copco Atlas-Copco Atlas-Copco Elu
Elu Elu Elu M5
45 mm
M5 With 5 mm
1/4" 1/4" 1/4" 5/16" 5.5 mm 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 7 mm 45 mm 1/4"
25 mm 1–3= 50 mm 32 mm 50 mm 50 mm 73 mm 1 = 90 mm 155 mm 168 mm 152 mm 176.5 mm 53 mm key aid 73 mm
DIN 965 DIN 7982 Trumpet
head 25 mm 2+3= M 6, PZ 2
4 = 32 mm 110 mm 0614 176
687
Dia.
Dia. Thread
Dia. Dia. Dia. Thread
Blade size
Phillips-head system
Blade size
Thread Thread Thread 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ... 0614 ...
D L1 L2
in mm in mm in mm Art. No. P. Qty.
1/4” 15 60 32 0614 176 760 1
4x ball clamp
2
KR - 09/12 - 07073 - ©
137
MAGAZINE SCREWDRIVER
MAGAZINE SCREWDRIVER Equipped with 12 bits
Briey pulling on the end cap Easy to remove the required bits. Secure locking by means of
loosens the bit magazine. "snap lock".
Art. no. 0613 600 1 Art. no. 0613 600 2 Art. no. 0613 600 3
Designation Tip Art. no. Qty. Designation Tip Art. no. Qty. Designation Tip Art. no. Qty.
Magazine screw- Magazine screw- Magazine screw-
driver, without bits 0613 600 0 1 driver, without bits 0613 600 0 1 driver, without bits 0613 600 0 1
PH 1 0614 176 274 1 AW®10 0614 511 0 1 PH 1 0614 176 274 1
PH 2 0614 176 461 1 AW® 20 0614 512 0 1 PH 2 0614 176 461 1
PH 3 0614 176 648 1 AW® 25 AW 0614 512 5 1 PH 3 0614 176 648 1
TX 20 0614 312 0 1 AW 30
® 0614 513 0 1 TX 20 with hole 0614 352 620 1
TX 25 0614 312 5 1 PZ 1 0614 176 651 1 TX 25 with hole 0614 352 625 1
TX 27 0614 312 7 1 PZ 2 0614 176 652 1 TX 27 with hole 0614 352 627 1
TX 30 0614 313 0 1 PZ 3 0614 176 653 1 TX 30 with hole 0614 352 630 1
TX 40 0614 314 0 1 TX 10 0614 311 0 1 TX 40 with hole 0614 352 640 1
Hexagon 0614 176 94 1 TX 20 0614 312 0 1 Hexagon 0614 176 94 1
socket Size 4 socket Size 4
Hexagon TX 25 0614 312 5 1 Hexagon 0614 176 95 1
0614 176 95 1
socket Size 5 TX 30 0614 313 0 1 socket Size 5
Hexagon 0614 176 96 1 Slotted 0.6 x 4.5 0614 175 652 1 Hexagon 0614 176 96 1
socket Size 6 socket Size 6
Slotted 0.6 x 4.5 0614 175 652 1 Slotted 0.6 x 4.5 0614 175 652 1
Hexagonal insert:
With torque adjustment, brushed chromium-plated.
Tip: Mount for 6-mm blade.
KR - 11/11 - 07380 - ©
B/C
mm mm mm Art. no. PU/Qty.
6.0 120/40 6/10 0613 473 1 1
138
SCREWDRIVER ASSORTMENT
SCREWDRIVER ASSORTMENT With telescoping blade, 21 pc. set
110 mm
• Complete assortment in high-quality folding
pouch with belt loop.
170 mm • Six empty compartments for long bits up to 70
mm
• The innovative quick-change holder for one-
handed bit insertion:
• Simply insert it – it engages automatically
• Changing bits is made easier thanks to a
spring mechanism which enables trouble-free
removal of bits
Art. No. 0613 390 1 Art. No. 0613 390 2 Art. No. 0613 390 3
Tip P. Tip P. Tip P.
Designation Art. No. Qty. Designation Art. No. Qty. Designation Art. No. Qty.
Screwdriver with Screwdriver with Screwdriver with
telescoping blade 0613 390 0 1 telescoping blade 0613 390 0 1 telescoping blade 0613 390 0 1
Slotted, 0.8 x 5.5 0614 175 653 1 Slotted, 0.8 x 5.5 0614 175 653 1 Slotted, 0.8 x 5.5 0614 175 653 1
PH 2 0614 176 461 2 PH 1 0614 176 274 1 PH 1 0614 176 274 1
PH 3 0614 176 648 1 PH 2 0614 176 461 2 PH 2 0614 176 461 2
PZ 2 0614 176 652 2 PH 3 0614 176 648 1 PH 3 0614 176 648 1
PZ 3 0614 176 653 1 PZ 1 0614 176 651 1 PZ 1 0614 176 651 1
TX 10 0614 311 0 1 PZ 2 0614 176 652 2 PZ 2 0614 176 652 2
TX 20 0614 312 0 2 PZ 3 0614 176 653 1 PZ 3 0614 176 653 1
TX 25 0614 312 5 2 TX 10 0614 311 0 1 TX 10 0614 311 0 1
TX 30 0614 313 0 2 TX 15 0614 311 5 1 TX 20 0614 312 0 2
AW 10 0614 511 0 1 TX 20 0614 312 0 2 TX 25 0614 312 5 2
AW 20 AW® 0614 512 0 2 TX 25 0614 312 5 2 TX 30 0614 313 0 2
AW 25 0614 512 5 1 TX 30 0614 313 0 2 TX 40 0614 314 0 1
AW 30 0614 513 0 2 AW 10 0614 511 0 1 Allen size 4 mm 0614 176 94 1
AW 20 AW® 0614 512 0 2 Allen size 5 mm 0614 176 95 1
AW 30 0614 513 0 1 Allen size 6 mm 0614 176 96 1
Allen size 4 mm 0614 176 94 1
Allen size 5 mm 0614 176 95 1
Actuate locking sleeve – the bit holder The bit is pushed into the mount when the Bit holder blade with quick-change chuck. Practical folding pouch with belt loop
blade will be driven out. sleeve is not actuated. Suitable for use in a machine. (lling suggestion, incl. 70 mm bits).
As soon as the bit is placed in a screw, it
locks automatically and is seated rmly
and securely.
1/4" BIT HOLDER The innovative quick-change holder for one-handed bit
insertion. Can be used as a machine bit holder.
D L L1
in mm in mm in mm Art. No. P. Qty.
KR - 07/12 - 07932 - ©
140
1/4" MULTI-SOCKET
1/4" WRENCH
MULTI-SOCKET WRENCH
• Design: chrome-plated, polished
• Drive: 1/4" square drive
• Output: Bi-hexagon, multi prole
• Geometry: short
Possible uses
Multi prole Hexagon/ Hex. TX head Square
bi-hexagon
L1 D1 D2 t
mm mm Inch TX mm mm mm mm mm Art. no. PU/Qty.
4 Size 4 5
32" E 5 – 22 6.8 11.9 5 0713 113 04 1
5 Size 5 – – Size 4 22 8.1 11.9 5 0713 113 05 1
5.5 Size 5.5 7
32" – Size 4.5 22 8.7 11.9 5.5 0713 113 055 1
6 Size 6 – E 8 Size 5 22 9.3 11.9 6 0713 113 06 1
7 Size 7 9
32" – – 22 10.8 11.9 6 0713 113 07 1
8 Size 8 5
16" E 10 – 22 11.9 11.9 7 0713 113 08 1
9 Size 9 11
32" – – 22 13.4 13.4 7 0713 113 09 1
10 Size 10 3
8" E 12 Size 8 22 14.5 14.5 10 0713 113 10 1
11 Size 11 7
16" E 14 Size 9 22 15.9 15.9 10 0713 113 11 1
12 Size 12 15
32" E 16 Size 10 22 16.9 16.9 10 0713 113 12 1
13 Size 13 1
2" – – 22 18.0 18.0 11 0713 113 13 1
14 Size 14 9
16" E 18 – 22 19.6 19.6 11 0713 113 14 1
141
RATCHET MAGAZINE SCREWDRIVER
RATCHET MAGAZINE SCREWDRIVER Equipped with 12 bits
1/4"
KR - 06/13 - 11042 - ©
Magnetic blade mount for 1/4" Easy removal of the desired bit. Secure closing thanks to "snap
bits. lock".
142
GUN RATCHET MAGAZINE SCREWDRIVER
GUN RATCHET MAGAZINE SCREWDRIVER
With LED light
4-in-1
Adjustable gun grip
+
LED light
+
high-performance ratchet
screwdriver
+
bit magazine with six bits
143
BIT ASSORTMENT
BIT ASSORTMENT Art. No. 0614 250 300
P. Qty. 1
Areas of Application:
Public facilities, motor vehicle and motorcycle sector, plumbing
applications, construction industry, electrical, electronics and machine
sector.
144
PISTOL GRIP
PISTOL RATCHET
GRIP MAGAZINE
RATCHET SCREWDRIVER
MAGAZINE SCREWDRIVER
LED light
Assortment, 37 pc.
Art. No. 0613 640 37
LED technology
•Working area is always well lit. Light falls directly onto screw connection
Gun grip position/bit magazine LED technology/ratchet function
•Especially suitable for dark corners
Size 13 mm 22 1
Size 14 mm 22 0713 111 114 1 Extension 70 mm 0613 710 1
1
4” bits Extension 150 mm 0613 711 1
PH1 25 0614 176 274 1 Magnetic bit holder 150 mm 0613 712 1
PH2 25 0614 176 461 1 Flexible bit holder 175 mm 0613 713 1
PH3 25 0614 176 648 1 Telescopic magnet
Magnetic retention force, 600 g – 150–530 mm 0613 714 1
145
MINI 1/4" MULTI SOCKET WRENCH ASSORTMENT (23 PIECE)
“Mini“1/4” Multi
Socket Wrench Assort-
ment, 23-piece
Art. No. 0965 11 23
Extremely compact special tools
with bit ratchet, multi socket
wrench and adapter for use
in the tightest of spaces.
Bit Ratchet
Technical Data:
l Mount: For 1/4“ hexagon drive in
accordance with DIN 3126-C 6.3
and E 6.3.
l Head: Extremely compact ratchet
head, fine-toothed, 72 teeth,
5° reversing angle.
l Version: chrome-plated with
2-component handle, extremely
slim design, angled down 10°.
High-performance bit ratchet:
l Very rugged design, max. torque
of up to 40 Nm.
Maximum flexibility: Knurled rotary disk Reversing lever
l A large number of different adapters,
‘ Screwing process can be ‘ Simple reversing of clockwise
bit holders and socket wrench inserts accelerated with thumb. and counterclockwise rotation.
can easily be combined.
Applications:
l Ideal problem-solver for handicraft
applications: e.g. motor vehilces,
commercial vehicles, motorcycles,
bicycles, mechanical engineering, fine
machinery and the furniture industry.
Multi-profile suitable for five most
Broad range of applications
common screw head drives! Hex metric, ‘ The right tool for any application.
4-sided metric, 12-sided metric, hex
inch and outer TX.
Contents
Length Length
Designation Tip Size Art. No. Designation Tip Size Art. No.
Bit ratchet 100 mm 0712 014 5 1/4” bit 0614 176 700
6x Multi-socket 0713 113 05 TX 10 bit 0614 311 0
wrench, each 1x 5, 22 mm to TX 15 bit 0614 311 5
6, 8, 10, 11, 13 mm 0713 113 13 25 mm
TX 20 bit 0614 312 0
Bit PH 1 0614 176 274
TX 25 bit 0614 312 5
Bit PH 2 0614 176 461 1
TX 27 bit 0614 312 7 1
Slot bit 0.8x 5.5 0614 175 653 TX 30 bit 0614 313 0
25 mm
Allen bit, 3 mm 0614 176 93 Extension 100 mm 0613 716
MWF - 03/10 - 12641 - © •
146
BITBOX 1/4", 12-PART
BITBOX 1/4ʠ, 12-PART • Bitbox made from high-quality, impact-resistant ABS plastic
• Fits perfectly in any shirt or trouser pocket
• Additional space for 1 bit holder
• Bitbox dimensions (W x H x D): 86 x 53 x 20 mm
Variant 1, Art. No. 0614 250 101 Variant 2, Art. No. 0614 250 102
P. P.
Drive Type Length in mm Art. No. Drive Type Length in mm Art. No.
Qty. Qty.
PZ1 0614 176 651 4 AW® 10 0614 511 0 3
Bit ¼ʠ PZ2 25 0614 176 652 5 AW® 20 0614 512 0 5
Bit ¼ʠ 25
PZ3 0614 176 653 3 AW® 30 0614 513 0 3
AW® 40 0614 514 0 1
Variant 3, Art. No. 0614 250 103
86 x 53 x 20 mm
Contents
31-pc. set: 30 bits, 25 mm long, 1/4"
mount, incl. bit holder
Color-coded system
See at a glance which bit ts which
screw.
148
POWER TOOLS
oVerVIeW
OVERVIEW oF haMMer
OF HAMMER DRILLSDrIlls
Type Properties Chuck Drilling capacity dia mm
4 6 8 10 12 14 16 18 20 24 28 32 35 40 45
H 18-A COMPACT The mobile model
Art. No. 0700 675 2 Clockwise running
• Impact stop
• 1.7 Joules
• 2.6 kg
• 1,350 Watts
• 8.2 kg
Additional details can be found on the respective catalog pages. Drilling range in concrete (solid drill): = possible = optimum
150
HAMMER DRILL BIT
QUADRO-S HAMMER DRILL BITS Rugged hammer drill bit with
X-shaped head geometry and four-
spiral conveyor for high drilling speed
with considerably improved running
smoothness and precision in comparison
to conventional bits featuring a head
with two cutting edges.
Properties:
Drilling speed: ˲˲˲˱
No hooking in
Smooth running: ˲˲˲˱
The drill bit tends to hook into reinforcement to
Precision: ˲˲˱˱
a considerably lesser degree thanks to the head
Reinforcement strength:** ˲˲˱˱
geometry with four cutting edges.
Service life: ˲˲˱˱
Dia.
Total length Working SDS-plus SDS-max P.
(in
(in mm) length (in mm) Mounting Shaft Mounting Shaft Qty.
mm)
Art. No. Art. No.
12 340 200 – 0647 701 234* 1
12 540 400 – 0647 701 254* 1
12 690 550 – 0647 701 269* 1
14 340 200 – 0647 701 434* 1
14 540 400 – 0647 701 454* 1 Double cutter: Quadruple cutter:
Two cutting-edge ends at an Four cutting-edge ends
15 340 200 – 0647 701 534* 1 ōset of 180° form a wide form a considerably smaller
surface for hooking in at surface for hooking in. The
15 540 400 – 0647 701 554* 1 reinforcements drill bit is not stopped at the
16 250 200 0648 701 625 – 1 reinforcement.
16 340 200 – 0647 701 634 1
16 450 400 0648 701 645 – 1
Precise tapping
16 540 400 – 0647 701 654 1
The specialized, self-centering tip enables precise
16 940 800 – 0647 701 694 1
tapping.
18 250 200 0648 701 825 – 1
18 340 200 – 0647 701 834 1
Improved precision
18 450 400 0648 701 845 – 1
This is a result of the four cutting edges of the bit
18 540 400 – 0647 701 854 1
head guide being better positioned in the drill
18 940 800 – 0647 701 894 1
hole, the four-spiral bit geometry and smaller
20 250 200 0648 702 025 – 1
friction surface. The four large-volume conveyors
20 320 200 – 0647 702 032 1
ensure fast transport of drilling dust.
20 450 400 0648 702 045 – 1
20 520 400 – 0647 702 052 1
20 920 800 – 0647 702 092 1
Adapter for plug-in tools
22 250 200 0648 702 225 – 1
For drill bits with SDS-plus mounting shaft on
22 320 200 – 0647 702 232 1
machines with SDS-max mounting shaft.
22 450 400 0648 702 245 – 1
22 520 400 – 0647 702 252 1
22 920 800 – 0647 702 292 1 Art. No. 0714 44 04
24 250 200 0648 702 425 – 1 P. Qty. 1
24 320 200 – 0647 702 432 1
24 450 400 0648 702 445 – 1
24 520 400 – 0647 702 452 1
25 250 200 0648 702 525 – 1
25 320 200 – 0647 702 532 1
25 450 400 0648 702 545 – 1
25 520 400 – 0647 702 552 1
MWF - 05/11 -04857 - ©
151
QUADRO-S
HAMMER DRILLHAMMER
BIT DRILL BITS
Dia. Total length Working SDS-plus SDS-max P.
(in mm) (in mm) length Mounting Shaft Mounting Shaft Qty.
(in mm) Art. No. Art. No.
26 450 400 0648 702 645 – 1
28 250 200 0648 702 825 – 1
28 370 250 – 0647 702 837 1
28 450 400 0648 702 845 – 1
28 570 450 – 0647 702 857 1
28 670 550 – 0647 702 867 1
30 250 200 0648 703 025 – 1
30 370 250 – 0647 703 037 1
30 450 400 0648 703 045 – 1
30 570 450 – 0647 703 057 1
32 370 250 – 0647 703 237 1
32 570 450 – 0647 703 257 1
32 920 800 – 0647 703 292 1
35 370 250 – 0647 703 537 1
35 570 450 – 0647 703 557 1
35 670 550 – 0647 703 567 1
38 370 250 – 0647 703 837 1
38 570 450 – 0647 703 857 1
40 370 250 – 0647 704 037 1
40 570 450 – 0647 704 057 1
40 920 800 – 0647 704 092 1
45 570 450 – 0647 704 557 1
52 570 450 – 0647 705 257 1
Attention: With long drill bit lengths, predrill with short drill bit of same diameter!
MWF - 05/11 -00077 - ©
152
SDS-PLUS DUO-S VARIO HAMMER DRILL BITS
SDS-PLUS DUO-S VARIO Rugged hammer drill bit fea-
HAMMER DRILL BITS turing an "aggressive" head with
two cutting edges, centering
tip and a core-strengthened
Vario feed helix for noticeably
improved drilling speed. Spe-
cially optimized for battery-op-
erated hammer drills.
Reinforcing cham- Asymmetrically arranged Self-centering tip
protrusions
Noticeably faster drilling
Optimized tip geometry and asymmet-
rically arranged protrusions on the cut-
Core-reinforced Vario feed helix ting edges provide for improved drilling
Features progress.
Drilling speed ●●●● Optimized drilling behavior
Smooth running ●●○○
when hitting reinforcement
Precision ●●○○
Strengthened carbide element with con-
Reinforcement strength ●○○○
Service life ●●○○ siderably enlarged reinforcement cham-
fers greatly reduces the probability of
Diameter Length Working length Art. No. P. catching when hitting reinforcement and
3.5 mm 110 mm 50 mm 0648 553 511 2 also increases durability.
4 mm 110 mm 50 mm 0648 554 011 2/10
4 mm 160 mm 100 mm 0648 554 016 2 Point-precise tapping
4.8 mm 110 mm 50 mm 0648 554 811 2 Thanks to specially designed self-cen-
4.8 mm 140 mm 80 mm 0648 554 814 2 tering tip.
4.8 mm 160 mm 100 mm 0648 554 816 2
4.8 mm 210 mm 150 mm 0648 554 821 2
Core-reinforced Vario feed
4.8 mm 260 mm 200 mm 0648 554 826 2 helix with narrower ridges in
5 mm 110 mm 50 mm 0648 555 011 2/10 the front, progressing to wider
5 mm 160 mm 100 mm 0648 555 016 2/10 ridges in the back, and steeper
5 mm 210 mm 150 mm 0648 555 021 2 spiral angle at the end of the
5 mm 310 mm 250 mm 0648 555 031 1 spiral.
5.5 mm 110 mm 50 mm 0648 555 511 2
Considerably better drilling speed and
5.5 mm 160 mm 100 mm 0648 555 516 2
drilling dust removal with increased
5.5 mm 210 mm 150 mm 0648 555 521 2
5.5 mm 260 mm 200 mm 0648 555 526 2
breakage resistance.
5.5 mm 310 mm 250 mm 0648 555 531 1 • Reduced friction
6 mm 110 mm 50 mm 0648 556 011 2/10/50 • Increased stability
6 mm 160 mm 100 mm 0648 556 016 2/10/50 • Maximum transmission of impact
6 mm 210 mm 150 mm 0648 556 021 2/10 power
6 mm 260 mm 200 mm 0648 556 026 2/10
6 mm 310 mm 250 mm 0648 556 031 1
6 mm 460 mm 400 mm 0648 556 046 1
STEP - 5/7/2015 - 17666 - © Cont. pages 17667
Iron reinforcements may only be drilled through with permission from structural engi-
neer.
153
SDS-PLUS DUO-S VARIO HAMMER DRILL BITS
SDS-PLUS DUO-S VARIO
Diameter Length Working length Art. No. P. Rugged hammer drill bit fea-
6.5 mm 260 mm 200 mm 0648 556 526 2/10 turing an "aggressive" head with
6.5 mm 310 mm 250 mm 0648 556 531 2/10 two cutting edges, centering
6.5 mm 450 mm 390 mm 0648 556 545 1 tip and a core-strengthened
7 mm 160 mm 100 mm 0648 557 016 2
Vario feed helix for noticeably
7 mm 250 mm 190 mm 0648 557 025 2
improved drilling speed. Spe-
7 mm 450 mm 390 mm 0648 557 045 1
8 mm 110 mm 50 mm 0648 558 011 2/10 cially optimized for battery-op-
8 mm 160 mm 100 mm 0648 558 016 2/10/50 erated hammer drills.
8 mm 210 mm 150 mm 0648 558 021 2/10
8 mm 260 mm 200 mm 0648 558 026 2/10
8 mm 310 mm 250 mm 0648 558 031 2
8 mm 400 mm 340 mm 0648 558 040 1
8 mm 460 mm 400 mm 0648 558 046 1
8 mm 600 mm 540 mm 0648 558 060 1
9 mm 160 mm 100 mm 0648 559 016 2
9.5 mm 360 mm 300 mm 0648 559 536 1
10 mm 110 mm 50 mm 0648 551 011 2/10
10 mm 160 mm 100 mm 0648 551 016 2/10/50
10 mm 210 mm 150 mm 0648 551 021 2/10
10 mm 260 mm 200 mm 0648 551 026 2/10
10 mm 310 mm 250 mm 0648 551 031 2/10
10 mm 350 mm 290 mm 0648 551 035 1
10 mm 450 mm 390 mm 0648 551 045 1
10 mm 600 mm 540 mm 0648 551 060 1
10 mm 800 mm 740 mm 0648 551 080 1
10 mm 1,000 mm 940 mm 0648 551 010 1
11 mm 210 mm 160 mm 0648 551 121 2
12 mm 160 mm 110 mm 0648 551 216 2/10
12 mm 210 mm 160 mm 0648 551 221 2/10
12 mm 260 mm 210 mm 0648 551 226 2/10
12 mm 310 mm 260 mm 0648 551 231 1
12 mm 360 mm 310 mm 0648 551 236 1
12 mm 450 mm 400 mm 0648 551 245 1
12 mm 600 mm 550 mm 0648 551 260 1
12 mm 1,000 mm 950 mm 0648 551 210 1
13 mm 260 mm 210 mm 0648 551 326 1
14 mm 160 mm 110 mm 0648 551 416 2/10
14 mm 210 mm 160 mm 0648 551 421 2/10
14 mm 260 mm 210 mm 0648 551 426 1
14 mm 310 mm 260 mm 0648 551 431 1
14 mm 450 mm 400 mm 0648 551 445 1
14 mm 600 mm 550 mm 0648 551 460 1
14 mm 1,000 mm 950 mm 0648 551 410 1
STEP - 5/7/2015 - 17667 - © Cont. pages 17668
154
CORDLESS DRILL SCREWDRIVER BS 18-A LIGHT
Description:
Technical Data
Nominal voltage 18 V/DC
Idle speed in 1st gear/2nd gear 0-450 / 0 - 1400 U/min(rpm)
Max. torque hard/soft 38 / 17 Nm
Number of rechargeable batteries/batteries 2 PCS
Min./max. drill chuck span width 1-10 mm
Max. drilling diameter in steel 10 mm
Max. drilling diameter in softwood 30 mm
Max. recommended drilling diameter in metal 10 mm
Max. screw diameter 7 mm
Length 169 mm
Height 224 mm
155
SDS
SDSROTARY
PLUSDRILL
HAMMER HAMMER
ROTARY HAMMER
ERHD DRILL
28-MLS DRILL
Light hammer drill with outstanding impact strength of
3,2J for drilling, hammering and light chiseling and
correction work.
ERHD 28-MLS
Art.No. 5717 0021
Multi purpose
• Normal drilling without impact and hammering drill mode.
• Machine runs both clockwise and counter clockwise.
Compact
Ergonomic shaped and lightweight machine for sustained
working without fatigue for the operator.
Technical Data
Voltage /Hz 220–240 V 50/60 Hz
Protection class / II
Nominal speed 1.250 rpm
No of impacts at nominal 4000 min-1
speed
Impact strength 3.2J
Application Max drill diameter in metal 13 mm
Max drill diameter in wood 30 mm
Max drill diameter in concrete 28mm
Drill chuck SDS-Plus
Power 800 watt
Weight 2.9 kg
Delivery Scope
Designation Art.No P. Qty.
Hammer drill ERHD 28-MLS 5717 0021 1
Hard plastic case 5132 51711 1
Accessories
156 PT 02 7
EHD
EHD 40-MLS
COMBI40-MLS
HAMMER COMBI
COMBI HAMMER
DRILLHAMMER
EHD DRILLDRIL
40-MLS
EHD 40-MLS
Art.No. 5717 0031
Application
Technical Data
Voltage /Hz 220-240 volt 50/60 Hz
Protection class / II
Power 1100 watt
No load speed 235–500 rpm
No of impacts 1350–2870 bpm
Impacts strength 9.5 J
Max drill diameter 40 mm
Drill chuck SDS - Max
Weight 6.4 kg
Delivery Scope
Designation Art.No P. Qty.
CombiHammer Drill EHD 40-MLS 5717 0031 1
Plastic Case – 1
Grease – 1
Accessories
PT 03 8 157
COMBIHAMMER
COMBIHAMMER BMHBMH
45-XE45-XE
158 PT 04 9
CORING AND TILE
DRILLING MACHINES
OVERVIEw DIAMOND
cORE DRILLING SYStEM
160
Overview Diamond Core Drilling System
Core bits
• Diamond-Wet Core Bits
Longlife & Speed
• Drilling with drill stand • Aluminium column with dovertail guideway • Aluminium column with dovertail guideway
• 2.400 Watt input power • Engraved drilling depth and drilling angle • Engraved drilling depth and drilling angle
• Bit Adapter: 1¼” male (½” female with indication indication
adapter possible) • Height: 76 cm • Height: 92 cm
(DS OMFORT XL:141 cm)
161
MODuLAR
DIAMOND cORE DS COMPACT
Drill stand
Art. 5709 141 0
DRILLING SYStEM
Customer picks the ideal
combination for his application
DS COMFORT
Drill stand
Art. 5709 142 0
162
Modular Diamond Core Drilling System
DS 130-T
Machine Second handgrip
Art. 5709 112 1 Art. 5709 112 010
DS 164
Machine with integrated slide
Art. 5709 113 0
DS 300 DS 300
Quick Release Guide Machine with Quick Release
Art. 5709 142 0 Guide included
Art. 5709 114 0
Supplied with:
• DS 130-P machine
• DS 130-P/-T guide block
• DS COMPACT drill stand
DS 130-T COMPACT
Art. 5709 112 200
Supplied with:
• DS 130-T machine
• DS 130-P/-T guide block
• DS COMPACT drill stand
164
Modular Diamond Core Drilling System
DS 300 COMFORT
Art. 5709 114 300
Supplied with:
• DS 300 machine with
Quick Release Guide included
• DS COMFORT drill stand
• Adapter 1¼” → ½”
165
PROFESSIONAL DIAMOND DRILLING AND cuttING tEcHNOLOGY 9
DS 130-P
• Pistolgrip – suited for horizontal drilling
• LED motor-overload indication
• Electronic Motor Protection System (EMPS)
Excessive overloading the motor will reduce the speed 6 times
electronically to warn the operator. The motor switches off
Diamond Core Drill for handheld automatically and can immediately be switched back on again.
drilling and drilling with drill • Safety clutch
• PRCD protective switch
stand for wet and dry use in • Aluminum motor housing
concrete, reinforced concrete and • Supplied with ORSY®BULL carrying case with auxiliary handle, tool
kit and waterflow indicator
masonry
Indication:
Carrying case provides place for
addional dry drilling kit
Accessories:
166
Diamond Core Drilling Machine DS 130-P
1 2 3 5
Also as set
available (see
page 6)
4
3 7
Indication:
Carrying case provides place for
addional dry drilling kit and second
handgrip
Accessories:
Second handgrip
• Suited for vertical drilling
• Enables a back-friendly posture
Art. 5709 112 010
168
Diamond Core Drilling Machine DS 130-T
1 2 3 5
Also as set
available (see
page 6)
4
3 7
170
Diamond Core Drilling Machine DS 164
1 Protective Brackets
2 Dovetail Guideway
2 4 Gear Switch
5 Wateflow Indicator
6 Water Switch
Technical Data
Power 2.000 Watt
Also as set avail- Motor 230 V/50/60 Hz/3-Speed-Gearing
able (see page 7) Bit Range Ø: Speed 1 101 – 164 mm
Speed 2 41 – 101 mm
Speed 3 14 – 41 mm
Bit Adapter ½“ female –1¼“ male
Dimensions (L x B x H) 590 x 200 x 220 mm
Weight (ohne Ständer) 12,9 kg
Accessories:
Above picture shows DS 164 with drill stand DS See page 22 for diamond core bits for DS core drilling
COMPACT → please order separately!
machines
3
6
172
Diamond Core Drilling Machine DS 300
1 Protective Brackets
1 2 Dovetail Guideway
5 Gear Switch
2 6 Wateflow Indicator
8 7 Water Switch
5 8 Water Levels
Technical Data
Power 2.400 Watt
Motor 230 V/50/60 Hz/3-Speed-Gearing
Drill Ø 25 - 300 mm
Bit Range Ø: Speed 1 120 – 300 mm
Also as set avail-
Speed 2 60 – 150 mm
able (see page 7)
Speed 3 25 – 80 mm
Bit Adapter 1¼“ male (½“ female with adapter)
Dimensions (L x B x H) 600 x 270 x 220 mm
Weight (without drill stand) 15,9 kg (incl. Quick Release Guide)
Accessories:
See page 22 for diamond core bits for DS core drilling
Above picture shows DS 300 with drill stand DS machines
COMFORT → please order separately!
3 4 6
DS 130-P/-T, DS 164
Recommendation:
Fasten DS drill stands using drop-in anchors W-ED, Art. 0904 010
126 and setting tool, Art. 0904 020 12
Accessories:
174
18 PROFESSIONAL DIAMOND DRILLING AND cuttING tEcHNOLOGY
Drill Stand DS COMPACT
4 Centering device 1
5 Water levels
3
6 Safety bolts with additional hexagon Also as set avail-
able (see page 6
7 Feed lever with quick release bracket, on and 7)
both side of the slide mountable, fits the
safety bolts hexegon
Recommendation:
Fasten DS drill stands using drop-in anchors W-ED, Art. 0904 010
126 and setting tool, Art. 0904 020 12
Accessories:
4 Centering device
5 Water levels
3
6 Safety bolts with additional hexagon Also as set avail-
able (see page 6
7 Feed lever with quick release bracket, on and 7)
both side of the slide mountable, fits the
safety bolts hexegon
8 Transportation wheels
6
4
Accessories
Accessories
Water hose connector
With ½”, ⅝” and ¾” universal hose connection for
common water hoses
Accessories only for DS 300:
Accessories only for DS 300: Art. 0701 160 007
½”-Model
Starting from drill bit diameter 32 mm
1¼”-Model
Starting from drill bit diameter 50 mm
Adapter
PROFESSIONAL DIAMOND DRILLING AND cuttING tEcHNOLOGY 25
• Adapter for foreign or WDS machines
• High quality laser inscription 1 2 3
4 5 6
7 8 9
APPLIcAtION
APPLICATIONOvERvIEw
OVERVIEWDIAMOND
DIAMONDcORE
COREbItS
BITSFOR
FORwEt
WETuSE
USE
Materials/Applications Zebra® Longlife & Speed
Art. 5456 …
½”
1¼”
Existing concrete/concrete ++
Concrete wash ++
Reinforced concrete (structural steel) ++
High strength reinforced concrete ++
Fresh concrete (abrasive) up to 2 days ++*
Fresh concrete (abrasive) older than 2 days ++*
Cellular concrete/lightweight concrete ++*
Concrete Gas concrete (Hebel/Ytong) ++*
Concrete blocks ++
Composite pavers ++
Concrete pipes ++
Concrete bricks ++
Pumice ++
Screed ++
Mortar/plaster ++*
soft ++*
Limestone
high-compression (hard) ++
Sandstone ++*
Marble +
Limestone +
Granite (soft) ++
Granite (hard) +
Gneiss +
Basalt +
Asphalt ++*
Refractory Fireclay bricks +
Clinker (hard) +
Clinker (soft) ++
Ceramics Pavers +
Clay bricks (hard)/Poroton ++
Clay bricks (soft)/Poroton ++*
180
24 PROFESSIONAL DIAMOND DRILLING AND cuttING tEcHNOLOGY
Core bits
Existing concrete, concrete Concrete wash High strength reinforced Composite pavers
concrete (≥ 25 mm)
Abrasive concrete, fresh Clinker bricks Poroton, clay bricks Mortar, plaster, screed
concrete
181
Core bits
Supply overview
Ø Work Total Segment Segment Segment Segment Art. Qty/pcs
mm length length height strength number connection
mm mm mm mm
8 5456 060 008
10 150 250 5456 060 010
12 5456 060 012
14 5456 060 014
15 5456 060 015
200 255
16 5456 060 016
18 5456 060 018
20 5456 060 020
22 5456 060 022
24 5456 060 024
25 9 2,2 Ring HFI 5456 060 025 1
26 5456 060 026
28 300 355 5456 060 028
30 5456 060 030
32 5456 060 032
35 5456 060 035
38 5456 060 038
40 5456 060 040
68* 5456 060 068
90 145 3,0
82* 5456 060 082
* Scope: switch and junction boxes
182
Core bits
CORE BITS
DIAMOND cORE bItS FOR wEt uSE 1¼”
Longlife & Speed
Supply overview
Ø Work Total Segment Segment Segment Segment Art. Qty/pcs
mm length length height strength number connection
mm mm mm mm
41 5456 065 041
476 2,5
46 5456 065 046
4
51 5456 065 051
56 5456 065 056
61 5456 065 061
5
66 5456 065 066
71 5456 065 071
6
76 5456 065 076
81 5456 065 081
7
86 5456 065 086
91 8 5456 065 091
101 5456 065 101
9
106 5456 065 106
112 10 5456 065 112
122 5456 065 122
127 11 5456 065 127
132 400 477 11 3,0 HFI 5456 065 132 1
140 5456 065 140
151 5456 065 151
12
156 5456 065 156
160 5456 065 160
164 5456 065 164
14
171 5456 065 171
181 17 5456 065 181
200 5456 065 200
218 5456 065 218
230 5456 065 230
250 5456 065 250
270 5456 065 270
19
280 4,0 5456 065 280
300 482 5456 065 300
320 5456 065 320
350 4,5 5456 065 350
400 24 5456 065 400
500 582
500 5,0 30 5456 065 500
183
30 PROFESSIONAL DIAMOND DRILLING AND cuttING tEcHNOLOGY
Compatibilty Würth Core Drilling Technology
COMPATIBILITY WÜRTH CORE DRILLING TECHNOLOGY
cONNEctIONS wItH ADAPtERS
Core drill Adapter Core bits
DS 152 (old) NDS 250 (old) W → 1¼" – ½" Core bits ½" connection
Art.
5462 000 001
DS 152 (old) NDS 250 (old) W → 1¼" – ½" Core bits 1¼" connection
Art.
5462 000 001
DS 130-P/-T DS 164 DS 300 1¼" → W Core bits Würth connection (W) (old)
Art.
5462 000 003
Art.
5462 000 002
184
Compatibilty Würth Core Drilling Technology
DS COMPACT DS 130-P
Art. 5709 141 0 Art. 5709 111 1
DS COMFORT DS 164
Art. 5709 142 0 Art. 5709 113 0
185
Supplied with
Angular Tile Drill for fast and • Carrying case
precise drilling in porcelain, • Water tank
• PRCD switch
glazed porcelain, glass, granite,
sanitary ware etc.
Drill guide
Adjustable drill guide
with vacuum pad
Art. 0702 419 002
Water collectorring
Max. bit diameter
Ø 73 mm
Art. 0702 419 004
186
Angular Tile Drill NDS 68
min. max.
Ø 4 mm Ø 68 mm
Art. Description
0651 687 040 Diamond Tile Bit Ø 4 mm
0651 687 050 Diamond Tile Bit Ø 5 mm
0651 687 060 Diamond Tile Bit Ø 6 mm
0651 687 080 Diamond Tile Bit Ø 8 mm
0651 687 100 Diamond Tile Bit Ø 10 mm
0651 687 120 Diamond Tile Bit Ø 12 mm
Würth tile bits
0651 687 130 Diamond Tile Bit Ø 13 mm
Specialty thin kerf diamond bits for
0651 687 140 Diamond Tile Bit Ø 14 mm 0651 687 320 Diamond Tile Bit Ø 32 mm
precise and high speed drilling in
0651 687 160 Diamond Tile Bit Ø 16 mm 0651 687 350 Diamond Tile Bit Ø 35 mm
porcelain, glazed porcelain, glass,
0651 687 180 Diamond Tile Bit Ø 18 mm 0651 687 400 Diamond Tile Bit Ø 40 mm
marble, granite, etc.
0651 687 200 Diamond Tile Bit Ø 20 mm 0651 687 450 Diamond Tile Bit Ø 45 mm
0651 687 240 Diamond Tile Bit Ø 24 mm 0651 687 510 Diamond Tile Bit Ø 51 mm
0651 687 260 Diamond Tile Bit Ø 26 mm 0651 687 600 Diamond Tile Bit Ø 60 mm Bit life up to
0651 687 280 Diamond Tile Bit Ø 28 mm 0651 687 680 Diamond Tile Bit Ø 68 mm
300 holes
Properties
• Single-component, deoxime neutral curing,
medium/high modulus.
• High tensile strength, high adhesive ability.
• Excellent unprimed adhesion to most common
building substrates with good expanding Perfor-
mance and waterproof capability.
• After cure form a clod and heat resistant, non-
corrosive, flexile sealant body.
• Excellent weatherproof, age resistant, ultraviolet
ant ozone resistant ability.
• Good capability with other Wurth series silicone
sealant.
Main Function
• Weatherproof sealing of glass curtain wall, stone
curtain wall(marble, granite), aluminium curtain
wall and metal structural curtain wall.
• Perimeter joints and other architectural and
industrial sealing.
Art.No Contents Color P.Qty
Operating Instruction
1892 54012 300 ml Black 24
• Suggest the proportion of the sealant width and
1892 5402 300 ml White 24
thickness is 2 by 1.
1892 5401 300 ml Clear 24 • Surface temperature of the substrate could not
1892 5404 300 ml Grey 24 exceed 40 degree centigrade.
1892 54112 600 ml Black 20 • All the material should be clean out; remove
1892 5412 600 ml White 20
dust/dirt or other feculence.
• Before handling perfom the capability and adhe-
1892 5414 600 ml Grey 20
sion test to confirm good adhesion.
• Cut the nozzle to desired size and apply sealant
Typical Physical Properties
into the joint. Perform regular site adhesion test to
These values are intended for use in preparing specifications. confirm good adhesion and joint fill.
Cure type Neutral
Flow sag or slump Aplomp ≤1 Safety Notice
Horizontal 0 • Avoid breathing vapor. Keep container closed.
Extrusion rate gr/min ≥ 110g/min Use with adequate ventilation. If inhaled, remove
Penetrtion (1/10 mm) ≥ 1mm to fresh air, if effects persist, get medical
attention.
Working time 10 - 20min
• Before handling perfom the capability and adhe-
Skin over time 10 - 15min
sion test to make sure that the product is fit for the
Staining 0 substrate.
Cure time 24h • We only promise the quality of the product within
Modulus at 100% elongation ≥ 100% the period of validity under proper storage.
Elestic recovery ≥ 80%
Movement capability ± 50% Technical Data
Service temperature range 45°C Drooping degree ≤ 1mm
Hardness (shore A) 45 - 50 Skin dry time (23 ± 2 C) ≤ 40min
Tensite strength 0.6 mpa Maximum elongate ratio ≥ 150%
Elongation at break ≥ 200% Rigidity (shore A ) 40 - 50
Specific gravity 1.418 Elongate intension ≥ 6.0 mpa
Colours Black, white, grey and clear Movement capability ± 50%
190
ACRYLIC SEALANT 310ML
ACRYLIC SEALANT 310ML
Art.No. 1892 165
Odorless one component acrylic based sealant
Instructions: The joints must be clean and free from dust, grease and
rust. No primer is required for non-porous surfaces. On porous surfaces
such as concrete, stone, cement and plaster. A primer
(mixture of one part acrylic sealant and 4-5 parts of water) should be
applied. Min/max joint width must be 5mm/25mm. The recommended
joint depth/width ratio is 1 to 2. Application temperature is between +5
°C and +40 °C. Immediately after the application, smooth the sealant
at once with a joint smoother. Excess sealant can be removed with a wet
cloth. Keep the sealed joint dry at least for two hours. Cured sealant can
be removed mechanically not suitable for permanent water storage.
Technical Data
Base chemical Acrylic dispersion
pH Value 7–8
Specific gravity 1,60 ± 0,03 gr/cm3 (ASTM D792)
Tack free time 50 ± 20min (23ºC and 50% R.H) (ASTM C679)
Skin forming 10 min
Curing rate 1 to 2mm/day (23ºC and 50% R.H)
Elongation at break 250% (ASTM D412)
Max. permanent motion 5%
Temperature resistance -10ºC to 80ºC
Application temperature +5ºC to 40ºC
Hardness (shore A) 50
Additional Products
Art.No. 0891 310–AE – Cartridge gun Art.No. 1715 660318 – Knife Art.No. 0891 182 – Joint smoother
Art.No. 0697 4 – Wire brush Art.No. 1899 103001– Safety goggles Art.No. 0899 404320 – Dotted gloves
191
SILICONE ACETATE
SILICONE ACETATE
Description
One component, Acide-curing system silicon sealant,
with high adhesion on sanitary and other con
struction material e.g. tiles, ceramic, glazed tiles, UPVC,
painted wood …, It cures at room temperature in the pre-
sence of atmospheric moisture forming a flexible sealant
body therefore curing time could vary due to environ-
mental conditions.
Application
For all general construction and industrial sealing appli-
cations.
Storage:
• Use before end of written expiry date on product
label, store in cool and dry conditions,
• Shelf life is 12 month if stored below 25°C.
Features:
• Outstanding primer less adhesion on a variety of
materials.
• Anti-Bacterial anti fugues , Low VOC.
• Low odor and volume shrinkage.
• Non sagging.
• Easy tooling, short tack free time.
• Possible to apply at +40°C.
• Flexible between -40°C up to 200°C.
Applicable standard
• American society for testing & materials international
Art.No Color/RAL Contents P.Qty
• ASTM C920 – Type S, grade NS, class 25 use
0892 3171 - 300 ml
A,G,O,NT.
0892 31712 Grey/7045 300 ml
0892 3172 White/9003 300 ml
0892 3176 Black/9005 300 ml 24
0892 3177 Brown/8028 300 ml
0892 3179 Cream/1015 300 ml
0892 31792 - 300 ml
Technical Data
Use: Please observe overview sheet
Extrusion rate, ml/min 106 ASTM C 639
“General Notes on Application for
Working time 3-10 min Sealants”.
Tack Free 15 min ASTM C 679
Cure time 2-3mm/24h
Application Gun
Elastic recovery 100%
Art. No. 0891 310-AE
Movement capability ±25% ASTM C 719
Art. No. 0891 400 600
Service temperature range ‒40°C to 200°C Knife
Hardness (shore A) 21±1A ASTM D 2240 Art. No. 1715 66 .....
Tensile strength 1.7 N/mm² ASTM D 638 Joint Smoother
Elongation at break ≥ 500% ASTM D 638 Art. No. 0891 181
Specific gravity 0.98±0.01 ASTM D 792 Silicone Remover
V.O.C. Appro 211.5 ASTM D 3960 Art. No. 0893 222
192
WÜRTH 1 COMPONENT POLYURETHANE CONSTRUCTION SEALANT
WÜRTH 1 COMPONENT POLYURETHANE CONSTRUCTION SEALANT
Product conforms to :
– ASTM C920 (Type S, Grade NS, Class 50, T2, M, A, O, I.)
– DIN 18540F
– ISO 11600/F/50LM
– ASTM 793-91
– DIN 11431
Description :
Würth 1 Component Polyurethane Construction Sealant is a
permanently elastic, one component, gun grade, moisture cur
ing polyurethane construction sealant. It forms a low modulus-
sealant with excellent adhesive properties and resistance to
ageing and weathering. Würth 1 Component Polyurethane
Construction Sealant is suitable for general building façade
joints, expansion joints, joints in precast elements, external
TECHNICAL DATA: walls and cladding, curtain and panel walls and for window
Chemical Base Polyurethane and door frame sealing. Avoid exposure of the sealant to high
Curing Mechanism Moisture Curing levels of chlorine such as sealing joints in chlorinated swim
Curing Through Volume 2 mm (24 hours at 230C at 50% room humidity) ming pools. -
Tack Free Time 120-140 (Minutes at 230C at 50% room humidity)
Shore A Hardness DIN 53505 25 (230C at 50% room humidity) Advantages :
Density (G/CC) 1.34 ± 0.02 . Permanently elastic over a wide range of temperatures
Elastic Modulus at 100% (N/mm2) DIN 53504 ≤ 0.4 . Non Sag Consistency
Tensile Strength (N/mm2) DIN 53504 ≥ 1.5 . Non sticky / does not pick up dirt
Elongation (%) DIN 53504 ≥ 700 . Easy to gun and to smoothen
Movement Accommodation (joint) 50% of total movement capacity . Bubble fee curing
Application Temperature (oC) From +5 up to +40 . Short skin formation time
Temperature Resistance (oC) -40 / 90, for short periods up to 120 . Short cut-of string
Elastic Recovery (%) DIN 52458 80 . Good adhesion on all type of construction materials
Immersion in Water ASTM C1247 No bond Loss or Cohesive Failuer . Good weathering and ageing properties
. Can be over painted (preliminary test recommended)
Applying the sealant : . Excellent sound insulation properties.
In order to guarantee free movement of sealants in a joint and to prevent cracking of the . Fire retardant Class E to BS EN ISO 11925-2:2010
sealant it should never adhere to the bottom of the joint. (3 point adhesion) For correct joint
dimensioning a backing material should be inserted to the bottom of the joint. For successful Application :
193
DUCT SEALANT 310ML
DUCT SEALANT 310ML
Art.No. 1892 3251
Odorless one component acrylic based sealant
Instructions: The joints must be clean and free from dust, grease and
rust. No primer is required for non-porous surfaces. On porous surfaces
such as concrete, stone, cement and plaster. A primer (mixture of one
part acrylic sealant and 4-5 parts of water) should be applied. Min/
max joint width must be 5mm/25mm. The recommended joint depth/
width ratio is 1 to 2. Application temperature is between +5 °C and +40
°C. Immediately after the application, joint smoother the sealant at once
with a wet tool. Excess sealant can be removed with a wet cloth. Keep
the sealed joint dry at least for two hours. Cured sealant can be removed
mechanically.
Technical Data
Base chemical Acrylic dispersion
pH Value 7–8
Specific gravity 1,60 ± 0,03 gr/cm3 (ASTM D792)
Tack free time 50 ± 20min (23ºC and 50% R.H) (ASTM C679)
Skin forming 10 min
Curing rate 1 to 2mm/day (23ºC and 50% R.H)
Elongation at break 250% (ASTM D412)
Max. permanent motion 5%
Temperature resistance -10ºC to 80ºC
Application temperature +5ºC to 40ºC
Hardness (shore A) 50
Optional items
Art.No. 0891 310–AE – Cartridge gun Art.No. 1715 660318 – Knife Art.No. 0891 182 – Joint smoother
Art.No. 0697 4 – Wire brush Art.No. 1899 103001– Safety goggles Art.No. 0899 404320 – Dotted gloves
194
WÜRTH FIRE RESISTANT ACRYLIC Contents:
Contents:
310ml
310ml
Suitable
Suitable For:For:
For fire
For protection
Art.No. fire0893
protection
sealing
303009sealing
of linear
of linear
jointsjoints
withwith
low lo
m
WÜRTH FIRE RESISTANT ACRYLIC wallswalls
and310ml
Contents: and
floors
floors
as well
as well
as fire
as protection
fire protectionof building
of buil
Suitable
Suitable
for most
for most
common
commonconstruction
construction materials
material
suc
WÜRTH
WÜRTH FIREFIRE RESISTANT
RESISTANT ACRYLICACRYLIC
andand
gypsum
Suitable gypsumboard
For: board
Art.No. 0893 303009
For fire protection sealing of linear joints with low move
Art.No. 0893 303009
Properties:
Properties:
Contents: 310ml310 ml Tube
walls and floors as well as fire protection of building se
Art.No. 0893 303008 600 ml foil pack
• Acrylic
• Acrylic
Suitable foremulsion
mostemulsion
common construction materials such a
• Fire
and • Fire
rated
gypsum
Suitable rated
in both
board
For: in both
horizontal
horizontal
andandvertical
vertical
jointsjoin
an
Suitable For:For • Joint
• Joint
fire movement
movement
protection capability
sealing capability
7.5%
of linear 7.5%with low move
joints
Properties:
•sealing
Skin
walls
For fire protection •and Skin
Formation
of Formation
floors
linear time
in firetime
as well
joints 30fire
as
ratedminutes
30 minutes
anddepending
floorsdepending
protection
walls on te
of building o
se
as well as fire protection
• of
Acrylic building service penetrations. Suitable
humidity
Suitable foremulsion
humidity
most common construction materials such a
for most common construction materials such as concrete, brick and
• Fire rated intime
both 60horizontal and vertical joints and s
gypsum board • Tack
and • Tack
gypsum freeboard
free time minutes
60 minutes
•
• Joint
For
• usemovement
For in
usejoints capability
in joints
up toup50 to7.5%
mm
50 mm widewide
• Skin
Properties: Properties:
• Excellent Formation
• Excellent slump time
slump 30resistancedepending on temp
minutes
resistance
• Acrylic emulsion humidity
•
• Acrylic
Shelf
• Shelf emulsion
Life Life
18vertical
months
18 months
• Fire rated in both horizontal and jointsunder
andunder
coolpenet-
service cool
andanddry dry
conditio
cond
•
• Tack
Fire free
rated time
in 60 horizontal
both minutes and vertical joints and s
rations Celsius)
Celsius)
• Joint movement •
• For
Jointuse in joints up
movement
capability 12.5% to 50 mm
capability wide
7.5%
• Fast • Fastcure,cure,
tacktack
freefree
withinwithin
one onehourhour
• Skin Formation •
• Excellent
time 20Formation
Skin slump
minutes resistance
depending
time on temperature
30 minutes and
depending on temp
humidity • Halogen
• Halogen FreeFree
• Shelf
humidityLife 18 months under cool and dry conditions,
• Tack free time• 40 Paintable
• Paintable
minutes
• upCelsius)
• For use in joints Tack
to 50free time 60 minutes
mm wide
• FastReduces
• cure,
• resistance
Reducessound sound
transmission
transmissionin joints
in joints
• Excellent slump• For use in tack
jointsfree
up towithin
50 mmonewide
hour
• Excellent
• Shelf Life 18 months
• Halogen Free
under cool and dry
slump conditions, (5 to 30
resistance
Technical
degrees Celsius)
• Technical Data: Data:
• Paintable
Shelf Life 18 months under cool and dry conditions,
• Fast cure, tack free within one hour
• Reduces
• Fire
• Fire
resistance
resistance
sound periods
periods
transmission up toup240
in to 240
joints minutes
minutes
accord
acc
• Halogen Free Celsius)
• Paintable fire resistance
• Fast fire resistance
cure, classification
tack free classification
within one up toupELto120
hour EL 120
accordi
acc
Please
Technical
• Reduces sound Please
see
transmission Data:
in
• Halogen Free see
ETAETA
joints 16/0235
16/0235andand
ETAETA16/0236.
16/0236.
•
•• Fire
Resistant
• resistance
Resistant
Paintable to moisture
to moisture
periods and
up toand
water
240 water
splashes,
minutessplashes,
neutral
neu
according
Technical Data:
freeresistance
fire
• Fire resistance•periods
Reducesfree
oftohalogen
up of halogen
sound
240 and and
silicone
classification
transmission
minutes accordingsilicone
up compounds
to ELcompounds
inBS476:
to joints 120 according
• Please
Airborne
Part 20 fire resistance seesound
ETAsound
• classification
Airborne 16/0235
up insulation
to andRwETA
insulation
EL 120 according to16/0236.
(C,CTr)=40
Rw (C,CTr)=40
EN (-3;-8
(-3d
13501-2. Please see ETA
• Resistant 16/0235
to and
moisture ETA 16/0236.
and water
EN ISO
Technical EN ISO 140-3:1995
Data: 140-3:1995 / EN ENsplashes,
/ ISO ISO
717-1:1997 neutral od
717-1:1997
• Resistant to moisture and water splashes, neutral odour, UV resi-
• free
• Fire of halogen
Classification
• and
Classification
resistance and
Sealant
periods silicone
Sealant
upISO compounds
to ISO
11600
240 11600 – F –according
minutes 7.5P
F – 7.5P
stant, free of halogen silicone compounds
• Airborne sound • Airborne
fire
• resistance
•insulation
Application sound
Application insulation
classification
temperature
Rw (C,CTr)=40 temperature Rw
(-3;-8 dB)+5 (C,CTr)=40
up toto ELto120
+5+40
according to+40 (-3;-8 dB)
according
degrees
degrees
Cels
• EN
BS EN ISO 140-3:1995 • ISO
Please
Temperature 140-3:1995
/ see
EN ISO
ETA717-1:1997
Temperature 16/0235
resistance / EN-15
resistance ISO
and to 717-1:1997
ETA
-15 +75to16/0236.
+75
degrees
degrees
Celsiu
C
• Classification• Sealant ISO 11600
Classification – F –
Sealant 7.5P ISO 11600 – F – 7.5P
•• Resistant
UL• EC to Certificate
moistureofand
UL+5Certificate
EC ofwater
constancy
constancysplashes, neutral od
of performance
of performanc 0
• Application temperature to +40 degrees Celsius
• Application
free of temperature +5 to +40 degrees Celsius
• Temperature resistance -15halogen
according
according
to +75 and
todegrees
regulationsilicone
to regulation compounds
Celsius305/2011/EU
305/2011/EU
• Temperature
• Airborne
• UL EC Certificate of constancy soundresistance
insulation Rw +75
of performance -15 to degrees(-3;-8
(C,CTr)=40 Celsius
dB)
0843-CPR-0304 • UL EC
accordingCertificate
to regulation of constancy
305/2011/EU
EN ISO 140-3:1995 / EN ISO 717-1:1997 of performance 084
according to regulation
• Classification Sealant ISO 305/2011/EU
11600 – F – 7.5P
Technical Data
Emission
Emission
datadata
(indoor
(indoor
air):air):
• Application temperature +5 to +40 degrees Celsius
•Compound
Compound Emission
to Emission
raterate
after
afterE
Base Acrylic based filler
Temperature resistance -15 +75 degrees Celsius
Specific gravity 1.56 – 1.60 3 days
3 days 3
•Emission data (indoor
UL EC Certificate air):
of constancy of performance 084
Reaction to fire Class D-s1, d1
TVOCTVOC
according
Compound 14 µg/m3
14
to regulation Emission µg/m3
305/2011/EU
rate after <
Emis
Non-sticky Max. 40 minutes
Sound Insulation
Film forming Max TSVOC
TSVOC20 minutes 3 <days
5 µg/m3
< 5 µg/m3 3 da
<
Description Sound reduction according to EN
ISO 10140-2:2010 TVOC
Movement Accommodation
VOCVOC
12.5%
w/o w/o
NIK NIK or CLI 147.4
or CLI µg/m3
µg/m3
7.4 µg/m3 < 5<µ
Single sided seal ≥12mm depth 62 dB Thermal conduct. Emission data (indoor
0.845 W/mK air):
(+/- 3%) @ 20mm depth
TSVOC < 5 µg/m3 <5µ
Double sided seal ≥12mm depth > 62 dB Working life R Value
R Value30 years 0.0089
0.0089 0
Compound
VOC w/o NIK or CLI Emission
7.4 µg/m3rate after <Emis
5µ
Formaldehyde
Formaldehyde 3 <days
3 µg/m3
< 3 µg/m3 <
3 da
R Value 0.0089 0
Acetaldehyde
TVOC Acetaldehyde 14< µg/m3
3 µg/m3
< 3 µg/m3 < 5<µ
Formaldehyde < 3 µg/m3 195 <3µ
TSVOC
Sum Sum
for+ace
for+ace <5<5µg/m3
µg/m3
< 5 µg/m3 <5µ
Acetaldehyde < 3 µg/m3 <3µ
JOINT
JOINT FOAM
FOAMFIRE-RESISTANT
FIRE-RESISTANTPLUS
PLUS Art. 0893 303 402
PROPERTIES:
Joint Foam Fire Resistance plus – fire resistance
Hand held foam, has good heat, sound insula-
tion and outstanding adhesion on most of building
materials such as Wood, Concrete, Metal , Alu-
minum, Bricks, UPVC but not polyethylene, silicon
and Teflon.
USE:
Thermal and acoustical insulation, filling of cavities
and sealing of building joints, hardly flammable
if applied on solid and mineral based materials,
or between metallic materials, fixing and mount-
ing of (electrical insulations, fire-proof doors and
windows ,safes,…) wherever a great fire resistance
is needed .
FEATURES:
• High yield, approximately 40L.
• High thermal and acoustic insulation.
• Cellular structure: closed cells.
TECHNICAL DATA: • High extrusion ability
Volume: 40-45L (free foamed) • Building material class B1 (DIN 4102).
Specific gravity: 22 - 26 kg/m3 • Resistance up to 4 hours according to EN13501
Application temperature: min. +5°C (surface), to 45°C and BS 476 part 20.
• Resists against ageing, temperature, many chem-
20 - 25°C (can)
ical agents, does not resist against UV-radiation.
Tack free time: 18°C/60% RH 5 - 10 min
• HCFC and CFC
Cutting time: ø=3 cm, 18°C/60% RH 20 - 25 min
Hardening time: 1,5 - 5 hours, depending PROCESSING:
on temp. and humidity The surface must be clean, dry, stable and free of
Temperature resistance: -40°C to +90°C dust. Any possible residue from, for example, oil,
Dimensional stability: max. -1% grease, rust should be removed. Dry and porous
Water absorption: DIN 53428 max. 1 vol. % surfaces should be moistened with water. The op-
Compression strength: DIN 53421 0,04 - 0,05 MPa timal application and can temperature is 25°C,
higher temperatures could make foam dispens-
Tensile strength: DIN 53455 0,07 - 0,08 MPa
ing difficult to control due to the pressurized can.
Elongation at break: DIN 53455 15 - 20%
Mount the application nozzle then shake the can
Thermal conductivity: DIN 52612 0,029 W/(m K) at 20°C well for approximately 20 times, position the can
Flammability class: DIN 4102, part 1 B1 in vertical upside down position, press the valve to
BS 476, part 20 start releasing the foam, since the foam is going to
VOC 170.7g/l expand 2 -3 times, it Is preferable to fill the gap
Color Pink partially, in case you have big gaps “more than
50 mm” it is advisable to apply the foam in lay-
SAFETY PRECAUTIONS: ers. Apply the second layer after the curing of first
Contains diphenylmethane-4,4-diisocyanate. Extremely flammable. Harmful by inhalation and if swal- one. Since the foam is moisture curing , it is recom-
lowed. Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation and skin con- mended to spray or moisturise the fresh foam with
tact. keep out of the reach of children. Do not breathe spray. After contact with skin, wash immediately water to speed up the curing time and increase
with plenty of water and soap. Wear suitable, protective clothing and gloves. If swallowed, seek medical the hardness. Cured foam can be cut and shaped
advice immediately and show this container or label. Use only in well-ventilated areas. Pressurized con- by a sharp knife only. Fresh and non-cured foam
tainer: protect from sunlight and do not expose to temperatures exceeding 50°c. Do not pierce or burn, can be cleaned and removed with Würth PU foam
even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources cleaner Art 0892 160
of ignition - no smoking. CURED FOAM MUST BE PROTECTED
AGAINST UV.
WARRANTEE AND RESPONSIBILITY:
As a respectful company, we have appointed all our efforts to present the information enclosed in the PACKAGING:
attached datasheet with a high level of accuracy. Nevertheless, as suppliers we hold no control over any • Aerosol can of 750 ml - 12 Per/Box
conditions or methods the end user applies in usage of this product. Thus, the information enclosed in the
attached datasheet can never be used as a replacement to the customer’s tests that qualify this product to STORAGE:
be of secure, efficient, and fully satisfactory usage for the end user. The instructions of application should • Use before end of written expiry date on
not under any circumstances encourage any violation of rights. Warranty is limited to meet the sales aerosol can, store in cool and dry conditions,
product specification on the time of delivery. In case the product does not meet the mentioned specifica- can must be vertical position.
tions, the only alleviation to this issue is the refund of purchase price or substitution of any product not • shelf life is 12 month if stored between 10°C
meeting the specs. - 20°C,higher storage temperature shorten the
product shelf life.
OWGC 03 0008
196
1KPUR
1K PUR MOUNTING
MOUNTING FOAM B2
FOAM B2
Art. No. 0892 155210
PROPERTIES:
Hand held foam, has good heat and sound insula-
tion and outstanding adhesion on most of building
material such as Wood, Concrete, Metal , Alumi-
num, Bricks, UPVC but not polyethylene, silicon and
Teflon
USE:
Thermal and acoustical insulation, filling of cavities
and sealing of all openings, fixing and mounting of
windows and doors frames.
Features:
• High yield, approximately 40L..
• High thermal and acoustic insulation.
• Cellular structure: closed cells.
• High extrudability.
• Resists against ageing, temperature, many chem
ical agents, does not resist against UV-radiation.
• Excellant adhesion on most substrates p.e. con-
crete, mamor, brick, PVC, metal and wood, ex-
cept PTFE, PE and PP.
TECHNICAL DATA: • HCFC and CFC
• Confirm to building material class B2 (self-extin
Volume 40 - 45 l (free foamed) 750ml guishing) according to DIN4102, part 1.
20 - 25 kg/m3
Application temperature min. +5°C (surfaces), 20°C - 25°C (can) Storage:
Tack free time 18 °C/60 % RH 5 - 10 min The surface must be clean, dry, stable and free of
Cutting time ø=3cm, 18°C/60% RH 25 - 30 min dust. Any possible residue from, for example, oil,
Hardening time 1,5 - 5 hours, depending on temp. and humidity grease, rust should be removed. Dry and porous sur-
Temperature resistance -40 to +90°C faces should be moistened with water. The optimal
Dimensional stability max. -1 % application and can temperature is 25°C, higher
Water absorption DIN 53428 max. 1 vol. % temperatures could make foam dispensing difficult
Compression strength DIN 53421 0,04 - 0,05 MPa to control due to the pressurized can. Mount the ap-
Tensile strength DIN 53455 0,07 - 0,08 MPa plication nozzle then shake the can well for approxi-
Elongation at break DIN 53455 20 - 25 % mately 20 times, position the can in vertical upside
Thermal conductivity DIN 52612 0,039 W/(m K) at 20°C down position, press the valve to start releasing the
Flammability class DIN 4102, part 1 B2 foam, since the foam is going to expand 2 -3 times, it
VOC. SCAQMD 1168/ ˂ 1.05 g/L Is preferable to fill the gap partially, in case you have
ASTM D 2369 big gaps “more than 50 mm” it is advisable to apply
Color Beige the foam in layers. Apply the second layer after the
SAFETY PRECAUTIONS: curing of first one. Since the foam is moisture curing
Contains diphenylmethane-4,4-diisocyanate. Extremely flammable. Harmful by inhalation and if , it is recommended to spray or moisturise the fresh
swallowed. Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation foam with water to speed up the curing time and
and skin contact. keep out of the reach of children. Do not breathe spray. After contact with skin, increase the hardness. Cured foam can be cut and
wash immediately with plenty of water and soap. Wear suitable, protective clothing and gloves. shaped by a sharp knife only. Fresh and non-cured
If swallowed, seek medical advice immediately and show this container or label. Use only in well- foam can be cleaned and removed with Würth PU
ventilated areas. Pressurized container: protect from sunlight and do not expose to temperatures foam cleaner Art 0892 160 .
exceeding 50°c. Do not pierce or burn, even after use. Do not spray on a naked flame or any CURED FOAM MUST BE PROTECTED
incandescent material. Keep away from sources of ignition - no smoking. AGAINST UV.
197
1KASSEMBLY
1K ASSEMBLYFOAM
FOAMB3
B3
General Recommendations:
Method of Application:
- Surface must be clean and free of all grease, dust, and moveable
parts.
- Moisture the surface in order to improve curing and cellular struc-
ture.
- Shake can well before use (at lease 20 times).
- Spray the foam; make sure the can is in an upright position.
Storage:
Store can vertical in cold and dry place with temperature range
from 5°C up to 25°C.
WÜRTH GULF OUTLET DUBAI SHOWROOM ABU DHABI SHOWROOM AL AIN SHOWROOM
Blue Shed, ZG-8, (near Round about13) 318th Almidan Road, 11 St. Mussafah 14 Nahyan, The First St.
Jebel Ali, Dubai, U.A.E. Al Quoz Industrial 4, Dubai, U.A.E. Abu Dhabi, U.A.E. Near Grand Hafeet Station,
T. +971 4 8834229 T. +971 4 8834229 T: +971 2 5544155 Al Ain, Abu Dhabi U.A.E.
F. +971 4 8834303 F. +971 4 8834303 F: +971 2 5544199 T: +971 3 7668402
E. japickshop1@wurthgulf.ae E. dxbpickshop1@wurthgulf.ae E: adpickshop1@wurthgulf.ae E: alnpickshop1@wurthgulf.ae