Beruflich Dokumente
Kultur Dokumente
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
The ultimate deck
With NURAJACKS™, low profile decks have Paving Tile or
Decking System
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - 20 year warranty
When installing over waterproofing membrane, tiles tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface solution to achieve this is using NURAJACKS™ and harsh UV sunlight so that it can keep your home dry.
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike
NURAJACKS™ MAKE IT EASY FOR ALL DECKING REQUIREMENTS
SIZES AVAILABLE:
Sizes are available for both tile and timber decks
from 8mm to 550mm.
TILE TIMBER
More information including installation videos
& quantity calculators are available at
www.nurajack.co.nz
pedestal solution
time-consuming and complicated now Self-Levelling
Head
• Creates a level deck surface NURAJACKS™ are height adjustable. They allow the the NURAJACK™. The void between the decking and the
• Strong and stable - load tested to over 1000kg tiles or decking to be raised up to the level of the substrate can be used to accommodate pipes and other
• Easy to replace tiles interior living space. This creates a level threshold with services. The NURAJACK™ system does not use grout
optimum indoor-outdoor flow. or adhesives. When it rains the water flows between the
• Durable - warrantied for 20 years
tiles and decking, onto the substrate and then
• Easy access to waterproofing membrane below When installing over waterproofing membrane, tiles
unimpeded onto drainage. The NURAJACK™ system
and decking should be removable to allow access to
• Void accommodates services which protects waterproof membranes from foot traffic and
the membrane below the surface. Your ultimate
can be placed under deck surface harsh UV sunlight so that it can keep your home dry.
solution to achieve this is using NURAJACKS™ and
• Acoustic sound barrier NURAPADS™. Adding the NURAJACK™ SE Acoustic Pad is a cost-
• Windproof options effective way to enhance the acoustic reduction
Laying a floor or deck with NURAJACKS™ is easy. The
• Level indoor-outdoor flow properties of the system.
NURAJACKS™ rest on top of the substrate and the
tiles or decking timber sit on the self-levelling head of
TILE
TIMBER
U N I Q U E F E AT U R E S & B E N E F I T S
WINDPROOF
WINDPROOF
The system consists of a metal clip that is attached to the head of the
NURAJACK™ and has the function of anchoring the tile to the head, “T” SECTION FIXING CLIPS
ATTACH TO TABS
without using glues or screws. This holds each paver to the
NURAJACK™ and distributes the weight of the entire deck across
all the tiles – prohibiting uplift of the individual pavers.
NURAJACK™
CON SIDE RATION S: SKIRTING
• The tiles/pavers used for this type of system must be milled in the TRIM
4 corners to accommodate the clips. This can be done off-site or
onsite utilising a grinder and a table.
• The NURAJACK™ Skirting Trim should be used to protect the
perimeter of the tiled installation.
NURAJACK™ Star.T (NJST) Tilehead Adjustment Key (NJAK) NURAJACK™ Mini Spacer (NJMS) NURAJACK™ Acoustic Separation
The smallest NURAJACK™ is the NURAJACK™ NURAJACKS™ can be adjusted by the NURAJACK™ The NURAJACK™ Mini Spacer is designed for Pad (NJSIL)
Star.T. Starting at a height of 8mm, The NURAJACK Adjustment Key even without the tiles being uplifted. installing 20mm tiles / structural pavers over SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
™ Star.T can be adjusted up to 15mm. The
The NURAJACK™ Adjustment Key simply slips NJMS compacted base-course and sand. Available in
NURAJACK™ Star.T is levelled using a NURAJACK™
Star.T Slope Corrector. It may be that the installer is between the tiles and into a slot in the top of the bags of 10.
ACOUSTIC
satisfied with the tiles following the fall of the NURAJACK™ or NURAJACK™ Star.T and when turned SEPARATION PAD
membrane, in which case no levelling of the the NURAJACK™ will adjust up and down. The 3mm
NURAJACK™ Star.T is required. NURAJACK™ Adjustment Key speeds up installation NURAJACK™ Mini Spacer + Spike
STAR.T and is ideal for minor adjustments. If installing heavy (NJMS+) NURAJACK™ Tile & Timber
8-15mm stone or concrete pavers, one or two pavers may need Cladding Clip (NJTCC)
The NURAJACK™ Mini Spacer + Spike is designed NURAJACK™
NURAJACK™ Star.B (NJSB) ADJUSTMENT
to be lifted before adjusting the NURAJACK™.
TILE & TIMBER
SEE SAME DETAIL AS TILE ACCESSORY OPPOSITE.
KEY
for installing 20mm tiles / structural pavers over
CLADDING CLIP
The NURAJACK™ Star.B is a 5mm base for the NJMS+ grass. Available in bags of 10.
NURAJACK™ Star.T. The NURAJACK™ Star.B bases
NURAJACK™ Acoustic Separation Pad NURAPAD™ 12mm Low Profile
can be stacked under the NURAJACK™ Star.T up to
3 high, giving the NURAJACK™ Star.T and Star.B
(NJSIL) Deck Pedastal
NURAJACK™ Vertical Clip (NJVC)
STAR.B combination an adjustable size of between Footfall noise on any deck area can be minimised Where there is not enough room for a joist and a
5mm 8mm to 30mm. through using the NURAJACK™ Acoustic Separation The NURAJACK™ Vertical Clip will hold 20mm
NURAJACK™, a NURAPAD™ can be used.
Pad. The NURAJACK™ Acoustic Separation Pad is a tiles in place vertically under a leading edge of a
NURAPADS™ are designed to sit under a timber or
self-adhesive disc that adheres to the base of the NURAJACK™. This is sometimes required when
NURAJACK™ Shim (NJS) ACOUSTIC the edge of a deck is exposed or the
aluminium joist. NURAPADS™ can accommodate
NURAJACK™. It will provide a NURAJACK™ SE3 with timber joists up to 50mm thick and do not need to
The NURAJACK™ Shim is designed for use with the SEPARATION PAD underside of the deck can be seen
3mm
a total of 25dB (IIC:25) reduction in acoustic NURAPAD™ be affixed to the joist - the joist will key into the
NURAPAD™ and NURAJACK™. The Shim can be transference noise. Acoustic Separation Pads can NURAJACK™
through a glass balustrade.
top of the NURAPAD™. NURAPADS™ can be used
used to accommodate any variance in thickness of also be used as a slip layer between a NURAJACK™ VERTICAL CLIP
as a cradle to support a tapered joist or until there
pavers or tiles. They can also be used to level a and an incompatible membrane. is enough space for a NURAJACK™ SE.
NURAPAD™ or NURAJACK™ Star.T if necessary. NURAJACK™ Tile & Timber Cladding
SHIM 1,2,3. Clip (NJTCC)
Tile Cladding Spacer (NJTCS) Similar to the Tile Cladding Spacers and suitable KEY BENEFITS OF NURAPADS™:
NURAJACK™ Head Locker (NJHL) for both tile and timber decks the NJTCC will • 12mm tall polypropylene plastic disk with upright
Under the building code a space must be maintained
When installing smaller cut tiles adjacent to full maintain a gap between the deck structure plastic tabs for the spacing of timber joists (or tiles).
between the installed tiles and the wall, cladding,
tiles, it may be necessary to lock the self-levelling joinery or balustrade. Nuralite’s Tile Cladding Spacers and the verticle surface as required by the • Large pad to evenly distribute the weight of the deck.
TILE CLADDING building code. To be affixed at the end of each
head to stop excessive movement. The NURAJACK™ are a self-adhesive rubber bumper available in 5mm, NURAJACK™ • NURAPADS™ can be stacked on top of each other or
SPACER
Head Locker is designed to clip into place and lock 10mm and 14mm sizes and maintain the space TILE & TIMBER joist around the perimeter of the deck. rubber shims (NJS) are available to adjust for height.
NURAJACK™ CLADDING CLIP
HEAD LOCKER the NURAJACK™’s self-levelling head required. Each Tile Cladding Spacer is slightly • Each NURAPAD™ can be separated into quarters
compressible and needs to be compressed to facilitate installation near corners & obstructions.
in place during installation. • MADE IN ITALY to the highest standards.
TILE TIMBER
SPEC DRAWING FOR TILE DECKS SPEC DRAWING FOR TIMBER DECKS
Selected tiles or pavers Use a combination of NURAPADS™ and NURAJACKS™.
Selected
balustrade
Membrane Downpipe
NOTE: DRAWING IS NOT TO SCALE, FOR ILLUSTRATION PURPOSES ONLY Selected balustrade
175x50
Warranty the supplier beforehand to ensure all products on and clear of foreign objects before installing
NURAJACKS™ are covered by a full 20-Year the deck are compatible. NURAJACKS™. 150x50
SIZE IN MM
Warranty. 125x50
Structural Tiles are a Must Strength
Specify Nuraply 3PM Waterproofing Membrane A structural tile or paver must be used with the NURAJACKS™ are made from high-density 100x50
with NURAJACKS™ NURAJACK™ system. Before purchasing your tile polypropylene injection moulding. Their strength 75x50
For a high-performance, fully warranted system, or paver check that it is strong enough to carry is demonstrated by their ability to take a maximum
specify Nuraply 3PM waterproofing membrane with foot traffic weight when supported by loading of 1000kg per NURAJACK™. If heavy loads 50x50
NURAJACKS™ to support tiles, pavers or decking. NURAJACKS™. You will need to get the supplier are anticipated this must be considered when Over membrane decks
specifying and designing the waterproofing system.
25x50
Nuralite offers a 20-Year material performance to warrant it will work with the NURAJACK™
warranty on all products installed as part of the system. It is the tile/paving suppliers Be aware that the NURAJACK™ system is not 0
complete system. See www.nuralite.co.nz for more responsibility to specify the quantity of designed to support moving vehicles such as cars 200 300 400 600 700 800 1000 1100 1200 1400
information. NURAJACKS™ required to support each or scissor lifts. Over other surfaces (incl. NURASPIKE™)
tile/paver. NURAJACK™/ NURAPAD™PLACEMENT IN MM
System Compatibility is Important Download your detailed instructions on the
If you are intending to install NURAJACKS™ over an Prior to Installation use of NURAJACKS™ and the installation
alternative waterproofing system please check with The waterproofing membrane must be clean at www.nurajack.co.nz
NURASPIKE™
™
1
NURASPIKE™ HITTING PLATE:
A new innovation 2
• Protects NURASPIKE™ Top Plate
(some indentation is to be expected)
• Attaches easily to NURASPIKE™
• Reusable for many
in deck footings
1. Components of
NURASPIKE™ + 4 x NURASPIKES™
self-drilling screws.
• Made in NZ from recycled
2. Slide the upper & lower materials
spikes together.
- made easy 3
DURABLE - Made
from galvanised steel
The new innovative NURASPIKE™
is the fastest & easiest way to
create deck footings.
• SAVES TIME & EFFORT - No
concrete needed, instead the unique
NURASPIKE™ design supports
NURAJACK™ firmly on the ground.
3. Bend the tabs of the top
plate with screw driver to
45 degrees.
4 P REC A U T I O NS :
• Check for in ground services where NURASPIKE™ is
4. Bend the tabs of the top
• SIMPLE - Install with an adjustable plate with a adjustable being installed.
EASY - No digging of NURAJACK™ directly under a joist • DECKING MADE EASY - Use with any spanner to 90 degrees.
large holes or concrete combination of NURAJACKS™ • Not suitable for waterlogged, heavily compacted or
or bearer to create a low-profile
rocky soil - if in doubt test the area first or check with a
5
required deck over grass or dirt. • STRONG – Can withstand being qualified engineer.
installed with a sledge hammer –
FAST - Start building • DURABLE – Made from galvanised
when used with a NURASPIKE™ • Use NURASPIKE™ Hitting Plate (available separately).
6
a deck immediately after steel to stand the test of time.
the NURASPIKE™ is
Hitting Plate (available separately). • Ensure deck complies with any relevant local or
• ELIMINATES EXTRA BACK
installed • NZ designed & manufactured governmental building requirements.
BREAKING WORK - No boring or
digging of large holes required, to the highest standards. • Assemble NURASPIKE™ completely before installation.
5. Assemble the NURASPIKE™
simply hammer into the ground. by screwing the self- • Follow manufacturer’s specification for structure &
drilling screws in
place. placement of decking boards.
6. Place the hitting plate
on top of the NURASPIKE™ • NURAJACK™ Placement Graph can be found on
Use with any combination of NURAJACKS™ & hammer into ground. the previous page of this brochure.
More information www.nurajack.co.nz/nuraspike