Beruflich Dokumente
Kultur Dokumente
WARNING WARNING
PERSONAL INJURY MISUSE OF DOCUMENTATION
DO NOT USE these • The information presented in this product sheet is for reference only. Do
products as safety or not use this document as a product installation guide.
emergency stop devices or • Complete installation, operation, and maintenance information is provided
in any other application in the instructions supplied with each product.
where failure of the product Failure to comply with these instructions could result in death or
could result in personal serious injury.
injury.
Failure to comply with
these instructions could
result in death or serious
injury.
SZX-SMF-08N SZX-SMB-08P
SZX-SMB-08
4PDT
For use with
SZR-MY4-1, -N1, -
D1, -X1
CONTACT RATINGS
Type DPDT 4PDT
Load Resistive Load (p.f. = 1) Inductive load Resistive Load (p.f. = 1) Inductive load
Ratings (p.f. = 0.4, L/R = 7 ms) (p.f. = 0.4, L/R = 7 ms)
Rated load 220 Vac, 5A 220 Vac, 2A 220 Vac, 3A 220 Vac, 0.8 A
24 Vdc, 5A 24 Vdc, 2A 24 Vdc, 3A 24 Vdc, 1.5 A
Carry current 5A 3A
Max. operating 250 Vac, 125 Vdc 250 Vac, 125 Vdc
voltage
Max. operating 5A 3A
current
Max. switching 1,100 VA, 120 W 440 VA, 48 W 660 VA, 72 W 176 VA, 16 W
capacity
Min. permissible 1 mA, 5 Vdc 1 mA, 1 Vdc
load
COIL RATINGS
Rated Current Coil Inductance (H)
(mA)
Rated 50 Hz 60 Hz Coil Armature Armature Pick-up Dropout Maximum Power
Voltage resistance OFF ON Voltage Voltage Voltage Consumption
(V) (Ω) (V) (V) (V) (W)
6 214.1 183 12.2 0.04 0.08 Approx.
12 106.5 91 46 0.17 0.33 1.0 W to 1.2 W
24 53.8 46 180 0.69 1.3 Max. Min. (60 Hz)
AC 50 25.7 22 788 3.22 5.66 75 % 30% 110%
100/110 11.7/12.9 10/11 3,750 14.54 24.6 Approx
110/120 9.9/10.8 8.4/9.2 4,430 19.2 32.1 0.9 W to 1.1 W
200/220 6.2/6.8 5.3/5.8 12,950 54.75 94.07 (60 Hz)
220/240 4.8/5.3 4.2/4.6 18,790 83.5 136.4
6 150 40 0.17 0.33
12 75 160 0.73 1.37 Max. Min. Approx.
DC 24 36.9 650 3.2 5.72 75% 10% 110% 0.9 W
48 18.5 2,600 10.6 21.0
100/110 9.1/10 11,000 45.6 86.2
Note 1: The rated current and coil resistance are measured at a coil temperature of 23 °C [73.4 °F] with tolerances of +15%,
-20% for AC rated current and ± 15% for DC coil resistance.
Note 2: The rated current of N1 and X1 types is 4 mA higher than the value in the table above.
SPECIFICATIONS
Contact material Silver
Contact resistance Max. 50 MOhm
Operate time Max. 20 ms
Release time Max. 20 ms
Operating Mechanical 18,000 operations per hour
frequency Electrical 1,800 operations per hour
CHARACTERISTIC DATA
AC resistive
4
4
Number of operations(× 10
Number of operations(× 10
1,000 1,000
10
DPDT 5
AC inductive
500 AC110V 500 AC110V p.f.=0.4
DC resistive
100 100
1
50 50
0.5
DC inductive
L/R=7ms DC24V DC24V L/R=7ms
0.1 10 10
5 10 50 100 500 0 1 2 3 4 5 6 7 8 0 1 2
Rated operating voltage(V) Current(A) Current(A)
)
)
4
4
Number of operations(× 10
1,000
Number of operations(× 10
1,000
4PDT 10 AC resistive
500 500
5 AC110V
0 1 2 3 0 0.5 1 1.5
5 10 50 100 500
Rated operating voltage(V) Current(A) Current(A)
22,0 [0.87]
14,5
[0.57] 4,6 [0.18]
6,2
[0.24]
49,9 [1.96]
39,6 [1.56]
2,2
[0.09
]
15°
Voltage Rating:
Terminal Type AC6V = 6 Vac
__ = Solder/Plug-in AC12V = 12 Vac
P = PCB AC24V = 24 Vac
AC50V = 50 Vac
Mounting Type AC100V = 100 Vac
1 = Terminal AC110-120V = 110/120 Vac
AC200V = 200 Vac
Option Type AC220V = 220 Vac
__ = No Indicator or Diode AC220-240V = 220/240 Vac
Poles DC6V = 6 Vdc
2 = DPDT D = Internal Surge Protection Diode
N = Red LED Operation Indicator DC12V = 12 Vdc
4 = 4PDT DC24V = 24 Vdc
X = LED and Diode
Amp Rating: DC48V = 48 Vdc
MY = 5 A or 3 A DC100V = 100 Vdc
LY = 10 A
Product Type
General Purpose Relay
[0.10]
[0.02]
2,6
0,5
1 4 1 4 1 4 1 4 1 4
5 8 5 8 5 8 5 8 5 8
9 12 9 12 9 12 9 12 9 12
- + - + - +
13 14 13 14 13 14 13 14 13 14
Bottom view
FIGURE 4. DIMENSION, CIRCUIT DIAGRAM, TERMINAL ARRANGEMENT, AND MOUNTING HOLE FOR
SZR-MY2-1P and SZR-MY4-1P
[0.02]
0,5
Max. 28,0
[0.04]
[0.13]
[0.25]
1,0
[1.10]
3,3
6,3
3,5
[0.14]
The circuit diagram is the same wit standard type of SZR-MY2-1 or the SZR-MY4-1
[0.02]
[0.10]
0,5
2,6
Max. 28,0
[0.25]
[1.10]
6,3
14 - O 1.2 [0.05] x 3 Holes
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8 5 6 7 8
9 10 11 12 9 10 11 12 9 10 11 12 9 10 11 12 9 10 11 12
- + - + - +
13 14 13 14 13 14 13 14 13 14
-
-
Bottom view
DPDT 4PDT
13.2 14- 1.3 0.1 13.2
4.4
4.1
4.3
12.65
6.3
6.35
0.1
3.75 8- 1.3
SOCKETS
FIGURE 7. SZX-SMF-08N FIGURE 8. SZX-SMF-14N
6,0 6,0
[0.24] 3,9 [0.24] 3,9
[0.15] 26,0 [0.15] 26,0
[1.02] [1.02]
[0.17]
45,0
4,2
[0.17]
[2.44 ± .004]
4,2
62,0 ± 0,1
45,0 [1.77]
35,2 [1.39]
62,0 [2.44]
62,0 [2.44]
[1.39]
35,2
2-M3 or 2-M4
2-M3 or 2-M4
[0.61]
15,6
[0.61]
15,6
[0.12]
18,0
[0.12]
26,0 [1.02]
3,0
3,0
[0.01]
0,3
Max. 25,5
Max. 25,5 [1.00]
Max. 29,5
[1.00]
[1.16]
7,7
2,7 [0.30] 2,6
2,7 7,7 [0.11] [0.10]
[0.11] [0.30]
2,6 [0.10] Max. 20,0
[0.79]
Max. 20,0
[0.79]
[1.02 ± .008]
25,8 ± 0,2
[1.02 ± .008]
Max. 38,5 [1.52]
25,8 ± 0,2
38,5 [1.52]
21,4 ± 0,2
0.84 ± .008 21,4 ± 0,2
[0.84 ± .008]
Max. 25,5
Max. 29,5
[0.01]
0,3 [0.01]
[1.00]
[1.16]
0,3
2,7 2,6 2,7 2,6
[0.11] [0.10] [0.11] [0.10]
Max. 16,5 13,2
[0.65] Max. 16,5 [0.52]
[0.65]
[0.23]
13,2 4,4
5,8
[0.16]
[0.52] [0.17]
4,1
[0.16]
4,1
[0.23]
38,5 [1.52]
5,8
38,5 [1.52]
12,65
[0.50]
[0.50]
12,65
[0.25]
[0.25]
6,35
6,35
[0.25]
[0.25]
6,4
6,4
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as While we provide application assistance
being free of defective materials and faulty personally, through our literature and the
workmanship. Contact your local sales office for Honeywell web site, it is up to the customer to
warranty information. If warranted goods are determine the suitability of the product in the
returned to Honeywell during the period of application.
coverage, Honeywell will repair or replace without For application assistance, current specifications,
charge those items it finds defective. The or name of the nearest Authorized Distributor,
foregoing is Buyer’s sole remedy and is in lieu contact a nearby sales office. Or call:
of all other warranties, expressed or implied, 1-800-537-6945 USA/Canada
including those of merchantability and fitness 1-815-235-6847 International
for a particular purpose. FAX
Specifications may change without notice. The 1-815-235-6545 USA
information we supply is believed to be accurate INTERNET
and reliable as of this printing. However, we www.honeywell.com/sensing
assume no responsibility for its use. info.sc@honeywell.com