Beruflich Dokumente
Kultur Dokumente
Manual
for Pantech DUO
OR
Pre-step 2: The Windows Mobile Device Center
(WMDC) should be disabled.
For Windows Vista
The WMDC
connection should be
disabled to reduce
the troubles before
you start re-flashing.
Pre-step 3: Find the USB/ Data Cable, which
can be used also for re-flashing
5
Pre-step 4: Plug the USB Connector to Laptop
6
Pre-step 5: Ready to start for Re-flashing.
7
Step 1: Run the Re-flashing Wizard.
8
Step 2: Install USB driver.
9
Step 3: Make the device in the status
for „Download Ready‟.
10
Step 4: Connect the USB Cable/ 16-pin
end to the device.
11
Step 5: Re-flashing starts
with a „Start‟ button pressed.
12
Step 6: Re-flashing Complete.
13
Step 6-1: When finished successfully.
1. On the phone, Go to Start > Settings > Connections > Modem Link >
Select “Inactive” > Press Done.
2. On the PC, Go to
ActiveSync > Click File > Connection Settings > Check the box for
“Allow USB Connections”. (Win2000 or XP)
Windows Mobile Device Center > Mobile Device Settings >
Connection Settings > Check the box for “Allow USB Connections”.
(Window Vista) 15
Step 7-1: when going to a failure.
When the re-flashing moves forward to a failure, you don‟t see any
change the LCD/ display of the device, and you can see Green LED light.
16
Step 7-2: when going to a failure.
Now you have to check “Emergency mode” on Re-flashing start page.
Then press start button, and Re-
flashing will be starting.
17