Beruflich Dokumente
Kultur Dokumente
2700
2590
4830
Technical description
Ranger 700 is a hydraulic, self-propelled, self-conĆ Ranger 700 has an ergonomic cabin to increase operaĆ
tained, crawler based surface drilling rig equipped with a tor's safety and visibility. The cabin is certified for R.O.P.S.
cabin (F.O.P.S. and R.O.P.S.) and rod handling system. It (ISO-3471 Roll-Over protection Structure) and F.O.P.S.
drills vertical, inclined or horizontal holes with a diameter (ISO-3449 Falling Object Protection Structure). WinĆ
of 64 - 115 mm (2 1/2" - 4 1/2") utilizing 38, 45 or 51 mm dows are laminated for added safety. The noise level in
(1 1/2", 1 3/4" or 2") extension rods. the cabin is less than 80 dB(A). To keep dust at a miniĆ
mum, the cabin is fitted with efficient filters for incoming
Ranger 700 is equipped with HL 700, hydraulic top hamĆ fresh air. Adjustable seat, good visibility, adequate lightĆ
mer rock drill. With high rotation torque, sufficient flushing ing and an optimum working temperature are among the
and sophisticated ergonomic drilling control system the many features ensuring a good operating environment.
rig is well suited also in very fractured rock conditions. Drilling functions are proportionally controlled by one hyĆ
The rock drill and articulated boom are mounted on the draulic joy-stick. Several routine functions e.g. antijamĆ
turnable superstructure giving a drilling coverage of over ming are executed automatically. There are fewer levers
17 m2 (190 sq - ft). to make it easy to use. Driving, rear jack and winch conĆ
trol can be done outside the cabin from the optional reĆ
mote control box.
Two variable displacement pumps and two gear pumps
are directly driven from one end of Caterpillar diesel enĆ Typical applications for Ranger 700 are road cutting,
gine, while the compressor is powered from the other end pipe-line drilling and foundation drilling, as well as proĆ
of the engine via cogged belt. Powerpack is mounted duction drilling in medium size quarries. Therefore RangĆ
crosswise at the rear end of the superstructure to keep er 700 is most often used by construction contractors,
counterweight on the opposite side of the boom and feed mines and quarries, and also included in the equipment
regardless of the drilling direction. fleet of rental houses as well.
SANDVIK TAMROCK reserves the right to change this specification without further notice.
RANGER 700
Spec. No. 00270-2
2000-08-18
2/4
Drilling geometry
Vertical drilling
+3 m
+2 m
+1 m
90°
-1 m
30°
-2 m
-3 m
-4 m
Transport dimensions
3600
3200
11000 7100
SANDVIK TAMROCK reserves the right to change this specification without further notice. S
RANGER 700
Spec. No. 00270-2
2000-08-18
3/4
SANDVIK TAMROCK reserves the right to change this specification without further notice.
RANGER 700
Spec. No. 00270-2
2000-08-18
4/4
Standard components
Note
- not with 10' MF-rods
- with hose reel only 10' or 12' rods
- 51 mm (2") steels only , MF-type
- if several jaws selected please specify jaws assembled
Selection of options
1. Air conditioning 16. Shut down of suction for water holes
2. Rod greasing system 17. Sanroc Mini H hydraulic bit grinder
3. P&Q electric vertical angle indicator (± 6 deg.) 18. Primary separator PS 50
4. Electric angle indicator TIM 2302 with aiming unit 19. Horizontal drilling kit
5. Measuring system TIM 2303 with aiming unit 20. Hose reel (not with 14' rods)
6. Laser based measuring system TIM 2305 21. Ether starting aid for engine, without ether bottle
7. Readyness for Power extractor 22. Radio with CD player
8. Electric filling pump for refuelling 23. Central lubrication system
9. Remote control box; for rear ground support, driving 24. Kit for alternative steels
and oscillation 25. Water injection system with tank
10. Remote control box + hydraulic winch with cable 26. Water injection system w/o tank
tightness automatics (replaces previous option) 27. Biogradeable hydraulic oil, Shell naturelle HFE 46 or
11. Hydraulic rear ground support HFE 68 (synthetic ester)
12. Three-bar grouser plates 28. Electronic manuals (Toolman)
13. Guides for grousers 29. Extra manuals
14. Fuel operated heater for cabin, 30. First service kit for Ranger 700
hydraulic oil and engine 31. Special tools for HL 700, field kit ID 150 734 88
15. Flushing control automatics 32. Special tools for HL 700, complete ID 150 730 78
SANDVIK TAMROCK reserves the right to change this specification without further notice. S
RANGER 700
Spec. No. 00270-2
2000-08-18
5/4
SANDVIK TAMROCK reserves the right to change this specification without further notice.
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND
Tel. int. +358 205 44 121, Telex 22193
Telefax int. +358 205 44 120