Basic Education Department-Junior High School (JHS) School Year 2020-2021
ACTIVITY SHEET no.2
CSS 12 (COMPUTER SYSTEM SERVICES) First Quarter – Learning Outcome 1
Topic: Setting Up Peer-to-Peer & Client/Server Network
NAME: Queen Laika O. Endo SCORE: ____________
GRADE & SECTION: 12- St. Augustine DATE: September 25, 2020
STEPS: Directions: Provide the steps being ask below. Write it on the space provided in a numbering alignment format.
Example: 1. Click Start.
2. Click My Computer. 3. Select the desired drive letter.
Peer to peer Network Client/Server Network
Step 1. Configure computer INSTALL WINDOWS SERVER name and workgroup name Standard on PC1-SERVER 1. INSTALL WINDOWS 7 1. Click on Start, Right click Ultimate on PC2-CLIENT Computer and select Properties. 2.Create Network Cable (5pcs 2.Select Change Settings and straight through cable) click on change. 3. Set-up Basic Network 3. Type in the Computer Name Configuration. and Workgroup Name. 4. Install LAN Driver for both 4. Click on Ok and select Yes to PC (PC1-Server & PC2-Client) Restart. 5. Set-up computer server 5. Do the same for other PC just change the name to 1. Change PC Settings (PC1, PC2 YOURNAME-PC2, but use the & Laptop) same Workgroup Name- CSSLAB. 1. Click on Start, Right click Computer and select Properties. Step 2. Change advance Sharing 2. Scroll down and select Change Settings. Settings and Click on Change. 1. Right click on LAN icon PC or 3. Type in the Computer Name wifi icon (laptop) at the and Workgroup Name. notification bar and select open 4.Click on Ok and Select Yes to network and sharing center. Restart. 2. Select change advanced 5. Do the same for PC2 sharing center. 6. Do the same for laptop 3. Turn network discovery, file, amd printer sharing...Scroll 2. Set Static IP Address for PC1- down and Turn off password Server protected sharing. 4. Do the same for Home or 1. Right click on LAN icon (PC) Work. at the notification bar and select 5. Finally select save changes. Open Network and Sharing 6. Do the same for the next pc. Center. 2. Select Change adapter settings Step 3. Create and Share folder 3. Right click Local Area Connection and select properties 1. Create a folder on the dekstop 4. Select Internet Protocol name it to YOURNAME- My Version 4 and click on Shared Files. properties. 2. Right Click on Folder and and 5. Select use the following IP select properties. address and enter the IP 3. Click on Share, Select addresses from the command Everyone, Click on Add prompt (IPCONFIG). Click on 4. Check Permission level to Ok twice to save settings. Read/Write and select Share 5. Click on Advance Sharing 3. Change Preferred DNS server 6. Check Share this Folder, click for PC2 & Laptop Client on permission and check Allow Full Control. 1. Right click on LAN Icon (PC) Click on apply and ok. Then at the notification bar and select click on apply and ok once again. Open Network and sharing center. Step 4. Access shared folder 2. Select Change adapter settings through the network. 3. Right click Local Area Connection and select Properties 1. Click on start, Right click 4. Select Internet Protocol computer and select open. Version 4 and click on Properties 2. Click on Network. 3. You should see two computers just like below. 4. Just open the other computer and you should be able to see open the shared folder.