Beruflich Dokumente
Kultur Dokumente
168 kW (Stage V)
45 t
Demolition machine
17 m
V
a ge
St
Advanced. The E-Series
Top-level performance
2 Durable mechanical systems - stressed parts optimized
High speeds - high load capacities
Maximum usability
3 Maxcab comfort cab - work in comfort
SENCON – work program selection made easy
Maximum safety
4 Safe entry and exit - non-slip steps
State-of-the-art cameras - entire work area in view
4
3
Maximum safety 2
m
Strong pumps with power reserves . 50 ge
Top efficiency thanks to large-scale hydraulic - 4 pic rria
valves and lines
0 0 m esco erca
Extra-long change intervals of 4,000 operat- 3. tel nd
u
ing hours through initial fill-up with special l er
w
cra
oil with extended service life when using
SENNEBOGEN HydroClean*
Features
Panoramic
� optimum cab climate with automatic
air conditioning system, partial tinted
glass
view
� pleasant and equal temperature disper-
sion by means of 9 nozzles
� panoramic view
6
Maintenance and service made easy.
Optimized for
maintenance
Fast and easy diagnosis thanks
to the clearly labeled electrical
distributor
Easy access to all the machine's
service points
Automatic central lubrication for
equipment and live ring track
* Option 7
Modular construction
Attachments
55
Demolition
hammer
426
338
Demolition equipment
55
Demolition grab
1116
18 m reach with :
2352
Clamshell grab
Uppercarriage
Cab Cab elevation
2.70 m
M
M Diesel-hydraulic drive
E270
Maxcab
Electrohydraulic drive
Tiltable 30°
Elevation 2.70 m
Undercarriage
telescopic
8
Advantages at a glance
Various attachments
available
extensive
lighting concept
Telescopic
crawler undercarriage
9
Technical data, equipment
CAB UNDERCARRIAGE
Cab elevation E270, hydraulically elevating cab, tiltable 30 ° Design Wide-gauge crawler undercarriage in stable,
Cab equipment Sliding door inc. sliding pane, vibration torsionally rigid box construction
damped, tinted safety glass, front pane can Drive Hydraulic travel drive
be openend, roof window, windscreen wiper Parking brake Spring-loaded, hydraulically ventilated disk
for front pane, radio preparation, air-suspended brakes, hydraulic brake valves
comfort seat, joystick steering, SENNEBOGEN
SENCON control & diagnosis system Traveling gear T41/380 telescopic crawler undercarriage
with hydraulic or mechanical track adjust-
Options Maxcab Industry ment of 2.3 - 3.8 m
Armored-glass windshield
Armored-glass sunroof Speed 0 - 1.6 km/h Stage I, 0 - 3 km/h Stage II
Safety side window and rear window
Windscreen wiper for front window/ ELECTRIC DRIVE
skylight
Rolling shade for roof window and Option Power: 132 kW / 400 Volt / 50 Hz
windshield Total connected load 250 kVA
FOPS protective roof guard Option: 160 kW / 400 Volt / 50 Hz
Protective front guard Total connected load 270 kVA machine
Charcoal filter for circulating and outside air side fuse 315 A (alternatively 355 A with
Auxiliary heating magnet system) for 400 V - via star-delta
Climatic seat circuit
Radio Advantages: Lowest operating costs, low-
Electric cool box noise and almost vibration-free work, long
service life of the hydraulic components
OPERATING WEIGHT
EQUIPMENT Mass 830 R with T41/380 hydraulic telescopic
crawler undercarriage and K17 equipment
Design Decade-long experience, most advanced and attachment
computer simulation, the greatest degree approx. 45,000 kg
of stability and longest service life, large-
scale mounting points and precision-crafted
sealed low-maintenance special bushings, Operating weight varies
Note
quick change couplings for connecting/re- with equipment.
moving/turning grabs
Cylinders Hydraulic cylinders with high-quality sealing
and guide elements, end position damping,
sealed mounting points
Options Ball valves in the grab hydraulic lines
Hoisting limiter / stick limitation adjustable
for stop settings, e.g. in the hall
Multi-coupling
K 17 ULM
18
16
14
12
10
0
18 16 14 12 10 8 6 4 [m]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets,
load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance
with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety
devices on the hoist and stick cylinders and an overload warning device. Load ratings apply to max. gauge and they are 360° slewing.
K 17 ULM
18
4.1
16
3.1 4.2 5.0
-6
-8
20 18 16 14 12 10 8 6 4 2 0 [m]
[m]
Undercarriage: T41/380 Compact boom: 10.5 m Cab: E270 Maxcab, hydraulically
elevating, tiltable by 30°
Grab stick: 7.1 m
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets,
load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance
with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety
devices on the hoist and stick cylinders and an overload warning device. Load ratings apply to max. gauge and they are 360° slewing.
Dimensions in [mm]
13
KA 10,5m Stiel 7,1m ULM
K 17 ULM
18
4.1
16
3.1 4.2 5.0
-6
-8
20 18 16 14 12 10 8 6 4 2 0 [m]
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets,
load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance
with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety
devices on the hoist and stick cylinders and an overload warning device. Load ratings apply to max. gauge and they are 360° slewing.
Demolition
55
Attachments
H
426
338
55
P
1116
H
Pulveriser O
2352
Weight H 0 P
Description
P
(kg) (mm) (mm) (mm)
CD 015 BB-A 1470 2050 710 530
6
32
55
426
332 Demolition grab
55
C
Weight Length A B C
Description
(kg) (mm) (mm) (mm) (mm)
984
A
Demolition hammer
A
430
Weight ø A
Description
(kg) (mm) (mm)
AB 1853 1800 135 2700
730
A
1688
426
338
55
Stick-mounted hydraulic
1116
A
H
performance data
2352
Dimensions in [mm]
15
430
Dimensions
830E mit T41/380
2650
3425 3100
(675) 2750
6000
3260
700
2675
1190
1010
330
2300 4240
3000 5100
3800
4500
3100
14650
6230
3230
3185
2740
1185
3400
2600 2890
14650
3600
16
200
3800 Dimensions
14650
3600
200
830 R-HDD with T41/380 undercarriage and 10.8 m compact
boom, 7.1 m grab stick, with cylinder protection
17
Optimum protection Cab
for ULM cyclinder series standard 30° tilt, protective guard
and underbody protection panel made of
riffled sheet metal
Easy to transport
transport width 3.0.m
transport length 14.6 m
18
19
This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines
delivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the
country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.
All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may
violate the rights of the owners.
Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are
expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change,
and rights of advancement are reserved.
© SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
830R-HDD-E-111810 -1119d-111910-2007du
SENNEBOGEN
Maschinenfabrik GmbH
Order no. 299234
www.sennebogen.com