Beruflich Dokumente
Kultur Dokumente
https://www.dumpsbase.com/freedumps/wp-content/uploads/2018/exams/DES-
6321%20V9.files/image002.jpg
12. What VxRail VSAN storage policy should NOT be changed or deleted after the initial
setup?
VM Encryption Policy
VSAN Default Storage Policy
VxRAIL-STORAGE-PROFILLE
VxRAIL-SYSTEM-STORAGE-PROFILE
13. In which VxRail models is the iDRAC NIC Selection Setting set to Dedicated?
P570, V570, and S570 only
E560 and G560 only
P570, V570, S570 and G560
E560, P570. V570, and S570
14. What is the correct sequence of steps used by the VxRail NVT workflow?
https://www.dumpsbase.com/freedumps/wp-content/uploads/2018/exams/DES-
6321%20V9.files/image006.jpg
15. What is the primary use of the VxRail PEQ Addendum?
Specifying Dell EMC- deployed switches and Stretched Clusters
Generating the NVT/FDC JSON configuration file
Deploying customer provided, non-Dell EMC network switches
Manually configuring VxRail Manager
16. What is the default VLAN ID of the Private Management VLAN network on a VxRail
4.7.x node?
0
1
3939
4095
17. Where are the vSAN logs stored?
Standard ESXi host logs
Master vSAN node
VSAN appliance VM
vCenter logs
18. By design, which network is required to have IPv6 Multicast enabled in order to set
up a VxRail with version 4.7.100?
Public management network
VSAN network
vMotion network
Private management network
19. Which requirement must be met when expanding a VxRail G560F 3 node Cluster
with a 4th G Series node in the same chassis?
Node must be a hybrid node
Node requires only the same processor type
Node requires only the same drive configuration
Node must be identical to the other three nodes
20. During a VxRail 2 node Cluster deployment, what is a valid connectivity option?
2×10 GbE
4×25 GbE
4 x1 GbE
2×25 GbE
21. A VxRail Stretched Cluster will be configured with four All-Flash nodes at each site
based on the following requirements:
– PFTT=1
– SFTT=1
– FTM= Erasure Coding
Based on the required usable capacity, what should be the planned capacity of the
design?
Single Site Capacity=200%
Total Cluster Capacity=400%
Single Site Capacity= 133%
Total Cluster Capacity=266%
Single Site Capacity = 100%
Total Cluster Capacity= 200%
Single Site Capacity=150%
Total Cluster Capacity=300%
22. You have just upgraded a VxRail Cluster from version 4.5.x to version 4.7.x. You
need to ensure that new VxRail 4.7.x nodes will be discovered without having to make
any changes to the nodes.
What action should you take on the existing configuration?
In vCenter, set the VLAN ID of the Management Network distributed portgroup to 3939
Add a new VLAN to the ToR switches with ID 3939
Add a new VLAN to the ToR Switches with ID 3939
In vCenter, set the VLAN ID of the Management Network distributed portgroup to 3939
Add a new VLAN to the ToR switches with ID 3939
In vCenter, set the VLAN ID of the VxRail Management distributed portgroup to 3939
23. What is the default network traffic configuration for a VxRail node with 2 x 10 GbE
ports?
Management, vMotion, and Virtual Machines on Uplink1
VSAN on Uplink
Management and vMotion on Uplink1
VSAN and Virtual Machines on Uplink2
Management and virtual Machines on Uplink1
VSAN and vMotion on Uplink2
Management Virtual Machines, and VSAN on Uplink1
vMotion on Uplink2
24. Which settings would you expect to find in the VXRAIL-SYSTEM-STORAGE-
PROFILE?
FTT = 1
Object space reservation (%) =0
FTT = 2
Object space reservation (9o) =0
FTT = 2
Object space reservation (%) =100
FTT = 1
Object space reservation (%) =100
25. In a VRail Stretched Cluster deployment. what is the required Round Trip Time (RTT)
between sites?
Primary to Witness site RTT: < 150 ms
Secondary to Witness site RTT: < 150 ms
Primary to Secondary site RTT: < 10 ms
Primary to Witness site RTT: < 250 ms
Secondary to Witness site RTT: < 250 ms
Primary to Secondary site RTT: < 10 ms
Primary to Witness site RTT: < 200 ms
Secondary to Witness site RTT: < 200 ms
Primary to Secondary site RTT: < 5 ms
Primary to Witness site RTT: < 10 ms
Secondary to Witness site RTT: < 10 ms
Primary to Secondary site RTT: < 6 ms
26. What is the minimum number of VxRail nodes required for a SAN storage policy with
FTT = 2 and FTM set to Erasure Coding?
4
5
6
7
27. What command is used to restart the Loudmouth process on a VxRail node?
/usr/lib/vmware/loudmouth/bin/loudmouth restart
systemctl restart loudmouth
systemctl restart vmware-loudmouth
/etc/init.d/loudmouth restart
Question was not answered
28. A VxRail solution will be deployed with the embedded VCenter and Log Insight. Prior
to deployment, DNS records must be created for which entities?
vCenter Server, ESXi hosts. VxRail Manager, and Log Insight only
vCenter Server, Platform Services Controller ESXi hosts, VxRail Manager, and Log
Insight only
ESXi Hosts, VxRail Manager Log Insight, and iDRAC only
vCenter Server, Platform Services Controller ESXi hosts, VxRail Manager, Log Insight, and
iDRAC
29. What data protection methods are included with the VxRail Appliance?
Stretched Clusters
NetBackup
vSphere Replication
Stretched Clusters
RecoverPoint for VMs
vSphere Replication
vSphere Replication
RecoverPoint for VMs
Avamar
RecoverPoint for VMs
Data Domain
Stretched Clusters
30. What are the categories that can be validated by the VxRail NVT?
Network Services, TOR Switches and Upstream Switches
TOR Switches and Upstream Switches only
VxRail Appliance, Network Services, and ToR Switches
VxRail Appliance, ToR Switches, and Upstream Switches
31. You are configuring SmartFabric Services on a VxRail running version 4.7.x.
What is the maximum number of separate vCenter instances that an OMNI plug-in can
be registered with in a single fabric?
1
2
5
10
Question was not answered
32. A VxRail Stretched Cluster deployment will have E560F nodes. The Cluster must
allow local protection with both erasure coding options at either site.
What is the minimum node configuration?
3+3 nodes
4+4 nodes
6+6 nodes
8+8 nodes
33. Which log bundles can be included in VxRail automated log collection used for
troubleshooting?
ESXi, Loudmouth, and PTAgent
Mystic, Loudmouth, and IDRAC
VxRail, Mystic, and vCenter
VxRail, ESXi, and vCenter
34. A customer. new to HCl and VxRail, has a Microsoft SharePoint workload that they
would like to use as their main application.
Which VxRail model is the best option for them?
S Series
G Series
P Series
E Series
35. What is the purpose of the As-Built Configuration Generator?
Create the customer deliverable documentation of the Dell EMC product/solution
implementation
Provide advanced control grouping for Stretched clusters
Capture and generate the installation workflow for review in the event of a failed deployment
Keep a record of all spare nodes, not yet added to a VxRail Cluster
36. Which service determines the primary node after powering on Dell PowerEdge-based
VxRail nodes during the deployment of a VxRail Appliance?
Marvin
Election
PTAgent
Loudmouth
37. A VxRail Stretched Cluster will have four hybrid nodes at each site.
What is the recommended storage policy to ensure cross-site and local protection using
storage as efficiently as possible?
PFTT=1
SFTT=0
FTM=Erasure Coding
PFTT=1
SFTT=1
FTM=Erasure Coding
PFTT=1
SFTT=1
FTM=Mirroring
PFTT=0
SFTT=1
FTM=Mirroring
38. Which vSAN feature requires an All-Flash Cluster?
Erasure Coding
Storage Policy Based Management
Data-at-Rest Encryption
VSAN Software Checksum
39. What are some of the items contained in a VxRail As-Built Configuration report?
Security updates
Support matrices
Firewall Ports listing
Security updates
Upgrade path
Firewall Ports listing
System configuration
Firewall Ports listing
Support matrices
System configuration
Support matrices
Upgrade procedures
40. What does the VxRail NVT validate when only Network Services Validation is
enabled?
VLAN configuration, NTP and DNS settings
IP address conflicts, NTP and DNS settings
VLAN and LACP configurations
VLAN and STP configurations
41. How is the primary node determined after powering on a Cluster of P570 VxRail
nodes during the deployment of a VxRail Appliance?
Loudmouth
Marvin
Node Selection
Election
Question was not answered
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-
information/products/
converged-infrastructure/h15300-vxrail-network-guide.pdf
44. What is the default network traffic configuration for a VxRail node with 2 x 10 GbE
ports?
Management and vMotion on Uplink1
vSAN and Virtual Machines on Uplink2
Management, Virtual Machines, and vSAN on Uplink1
vMotion on Uplink2
Management, vMotion, and Virtual Machines on Uplink1
vSAN on Uplink2
Management and Virtual Machines on Uplink1
vSAN and vMotion on Uplink2
45. What is required to enable vSAN encryption on a VxRail cluster?
All-Flash system
External Key Management Server
Internal vCenter Server
Internal Key Management Server
External vCenter Server
External Key Management Server
Internal vCenter Server
External Key Management Server
Explanation:
Reference: https://docs.vmware.com/en/VMware-
vSphere/6.7/com.vmware.vsphere.virtualsan.doc/GUIDF3B2714F-3406-48E7-AC2D-
3677355C94D3.html
46. A customer is configuring VxRail to connect to an existing, external SRS VE. Their
support account is associated with the Site ID/Party ID where VxRail is installed. A
validation error is issued when the customer attempts to register VxRail in SRS.
What is the possible cause for the error?
Status of VxRail in Install Base is ‘Shipped’
Wrong IP address was used for SRS VE gateway
SRS traffic goes through a proxy server
Number of deployed devices on SRS gateway has exceeded the maximum
Explanation:
Reference: https://www.dell.com/community/VxRail/ESRS-on-VxRail-Manager/td-p/7147964
47. An implementation engineer is attempting to add a new node to a 3 node VxRail
cluster.
What is the minimum VxRail code version that no longer requires the fourth node to
match the first three nodes?
4.0.302
4.0.502
4.5.070
4.5.150
Explanation:
Reference: https://www.vstecs-dellsolutions.com/wp-content/uploads/2018/10/vxrail-faq.pdf
48. What is the minimum number of VxRail hosts required if FTT = 1 and FTM is set to
Erasure Coding?
3
4
5
6
Explanation:
Reference: https://wuchikin.wordpress.com/2016/12/04/how-many-nodes-are-need-on-vxrail
49. A Dell EMC solutions architect has updated the VxRail PEQ with Customer Top-of-
Rack (ToR) switch details.
On which worksheet would they need to be to generate a new NVT JSON file?
Engagement Details
Networking Details
Customer
VxRail Cluster
50. A failure occurs during the deployment of a VxRail cluster. You need to look through
the marvin.log file to see what could be causing the error.
Where is this file located?
var/log/vmware/marvin
var/log/vmware
var/log/vmware/marvin/tomcat/logs
var/log/mystic
Explanation:
Reference: https://www.javydekoning.com/vxrail-monitoring-managing/
51. The vCenter managing a VxRail cluster must be able to support both Enhanced
Linked Mode and Vsan Encryption.
What is the correct configuration to satisfy this requirement?
External vCenter
External PSC
Embedded vCenter
Embedded PSC
External vCenter
Embedded PSC
Embedded vCenter
External PSC
52. Where is the VxRail Manager pre-installed on a newly shipped, 4 node VxRail Model
G410 system?
Node with the highest serial number
Bottom-right node from the front
All nodes
First node
53. In a 5 node VxRail cluster in which all nodes are the same model, which cluster
requires the least amount of rack space?
G560
E560
S570
V570
54. A newly installed VxRail system appears to have poor vSAN performance for all VMs
on the cluster.
What can be used to identify the issue?
esxtop with v view
resxtop with d view
esxtop with x view
resxtop with s view
55. What is not a requirement for a VxRail External vCenter deployment?
FQDN of the Embedded PSC
FQDN of the vCenter Server
An existing datacenter name to be used for the VxRail cluster
Verification that the DNS server can resolve all VxRail ESXi hostnames
Explanation:
Reference: https://www.dellemc.com/et-ee/collaterals/unauth/technical-guides-support-
information/products/
converged-infrastructure/h15844-vxrail-4-0-vcenter-server-pg.pdf
56. Which vSAN setting is enabled by default during the initial deployment of a VxRail
cluster?
Deduplication and Compression
Performance Service
Storage policy of FTT = 1
Encryption
Explanation:
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-
information/products/
converged-infrastructure/h15104-vxrail-appliance-techbook.pdf (15)
57. What is used to control remote access to VxRail through SRS?
VxRail Manager
SRS VE Gateway
vCenter
Policy Manager
Explanation:
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-
information/products/
converged-infrastructure/h15300-vxrail-network-guide.pdf
58. How many nodes can be added simultaneously to an existing VxRail cluster running
at code version 4.5?
1
3
6
8
Explanation:
Reference: https://www.dellemc.com/resources/en-us/asset/technical-guides-support-
information/products/
converged-infrastructure/docu86660.pdf
59. What output logs are collected using the vc-support.sh script?
vCenter log bundle
ESXi log bundle
vRealize Log Insight support bundle
VxRail Manager log bundle
18. DRAG DROP
What is the correct order of steps to install a Dell PowerEdge-based VxRail cluster?
https://www.dumpsbase.com/freedumps/wp-content/uploads/2018/exams/DES-
6321%20V8.files/image002.jpg
60. DRAG DROP
Match the management tool that is used to perform the associated operation in a VxRail
environment.
https://www.dumpsbase.com/freedumps/wp-content/uploads/2018/exams/DES-
6321%20V8.files/image006.jpg
61. In addition to the VxRail YouTube video, links to what resources should the SE send
to the customer, according to the VxRail PEQ Engagement Details worksheet?
VxRail vCenter Server Planning Guide
VxRail Network Guide
VxRail QuickStart Guide
VxRail Network Guide
VxRail vCenter Server Planning Guide
Network Validation Tool
VxRail QuickStart Guide
Network Validation Tool
62. What does vSAN use to make metadata available to each host in the VxRail cluster?
Loudmouth
CMMDS
MLD Snooping and Querier
IPv6 Multicast
63. You are validating that a network environment is ready for a 4 node VxRail Model
V570F deployment.
What types of DNS records must be created for VxRail components before
implementation can begin?
Forward (A) records only
Forward (A) records and Reverse (PTR) records
Forward (A) and MX records
NS records and Reverse (PTR) records
Explanation:
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-
information/products/
converged-infrastructure/h15300-vxrail-network-guide.pdf (30)
64. Which port configuration is invalid on the integrated NIC of a VxRail node?
2 x 25 GbE SFP28
2 x 10 GbE RJ45
2 x 10 GbE SFP+
2 x 1 GbE RJ45
Explanation:
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-
information/products/
converged-infrastructure/h15300-vxrail-network-guide.pdf (10)
65. Which command can be used from VxRail Manager VM to restart the loudmouth
daemon?
systemctl restart loudmouth
/etc/init.d/vmware-loudmouth restart
systemctl restart vmware-loudmouth
/etc/init.d/loudmouth restart