Beruflich Dokumente
Kultur Dokumente
com
+91 8754399816
Career Objective
Aspiring to acquire a position as a Senior Engineer with an esteemed
organization, where there are opportunities to apply acquired technical skills and learn new skills
along with scope for innovation, creativity and passion.
Professional Experience
KLIMA CHAMBER
Project Description
This project work mainly included creating programs for Temperature Chamber and
Climatic Chamber Boards
These chambers can be used anywhere from research and development to production
purposes or even for quality testing of application in industries such as defense,
aerospace, automotive and electronics.
The temperature ranges from -70 °C to +180 °C and humidity range from 10% RH to
98% RH.
Responsibilities
Responsible for creating programs for slave device such as RTD transducer to read
analog value from the PT100 sensor into human readable form using C language.
Responsible for creating programs for slave device such as Piezo electric transducer to
read 4-20mA value and converting the transducer data into human readable form using C
programming.
Responsible for creating programs for OLED to display temperature, pressure and
humidity value on respective IO cards using C programming.
Responsible for creating initial programs for Digital IO cards with the help of memory
management technique using C programming.
Responsible for programming the microcontroller with the final version of the code.
Responsible for fixing the bugs found during the integration, one of the notable bug was
related to the CRC check.
Responsible for creating setup i.e., circuit connection between master and slave devices
such as RTD card, Piezo electric transducer card and Digital IO card
Responsible for updating the EEPROM data with every new slave device such as RTD
transducer, Piezo electric transducer and Digital IO.
Responsible for testing of slave devices RTD transducer, Piezo electric transducer and
Digital IO with the created test cases.
Responsible for monitoring and testing of communication protocol (RS485) between
master and slave devices i.e. RTD transducer, piezo electric transducer, Digital IO and
PMC transducer.
Responsible for monitoring the responses of parameters such as Time, Dwell, Step, Rate,
Wait, GoBack, Call, End, in RTD transducer and Piezo electric transducer.
Responsible for understanding the programs used in master which is written in GoLang
programming language.
Responsible for understanding the flow of programs where memory and time
management is used with FreeRtos
Employer: Sukant Projects Laboratory Pvt. Ltd, Bangalore Jul 2017 – Dec 2018
Designation: Associate Embedded Product Developer
Project Description
This project is developed for continuous monitoring of electrical supply for various
machineries
On integration MCP23017 with ESP32 module we can monitor the live status of
machines whether it is ON or OFF through Grafana Dashboard
Responsibilities
Responsible for creating the application to read input signal from the machineries to
ESP32 module using C programming.
Responsible for creating the application for own Wi-Fi credential for every ESP
module to be connected to the internet.
Responsible for fixing the bugs found in integration of ESP module, one of the
notable bug was implementing the correct format to read the data from the
machineries.
Involved in the R and D of the product Development.
Responsible for programming the microcontroller with the final version of the code.
Responsible for selection of electronic components such as for rectifier, opto-coupler,
resistor and capacitor, etc. the system meeting both cost and performance criteria.
Responsible for the creation of PCB (Printed Circuit Board) Schematic, Routing and
generation of Gerber file.
Responsible for converting the PCB design into the physical board and validation of
the PCB board and their component outputs.
Project Description
Responsibilities
Responsible for creating the application to read analog sensor from the sensor DS18B20
and convert them into human readable form to find temperature using C programming.
Responsible for bug fixing of temperature value conversion from analog to digital to get
the accurate value.
Responsible for creating program for own Wi-Fi credential for every ESP module to be
connected over internet.
Involved in the R and D of the product Development
Responsible for programming the microcontroller with the final version of the code.
Responsible for selection of electronic components such as sensor, resistor, capacitor and
led, etc. for the system meeting both cost and performance criteria
Responsible for the creation of PCB (Printed Circuit Board) Schematic, Routing and
generation of Gerber file.
Responsible for converting the PCB design into the physical board and validation of the
PCB board and their component outputs.
Responsibilities
Responsible for creating the application for Arduino Uno(master) and Arduino Nano
(slave) module to communicate using NRF24L01+ using C programming.
Responsible for creating the application for different sensor module such as Temperature
and Humidity.
Responsible for creating the application with address management technique for each
slave devices i.e. Arduino nano using C programming.
Responsible for bug fixing of connecting multiple slave devices i.e. multiple Arduino
Nano, to the master device.
Responsible for programming the microcontroller with the final version of the code.
Responsible for selection of electronic components such as humidity sensor, relay, for the
system meeting both cost and performance criteria.
Responsible for converting the PCB design into the physical board and validation of the
PCB board and their component outputs.
Academic Credentials
Award
Won 3rd prize in World Robotics Championship on Fastest Line Follower held at
Delhi on Sep- 2019
Personal Profile
Declaration
I hereby declare that all the above mentioned information given by me is true and correct
to the best of my knowledge and belief.
Vigneshwaran V