Beruflich Dokumente
Kultur Dokumente
22 AUTOMOTIVE EQUIPMENT
AUTOMOTIVE SERVICE TOOLS
FUEL INJECTION PRESSURE TESTER KIT OIL PRESSURE TESTER KIT RADIATOR PRESSURE TESTER KIT
Including radiator
cap pressure tester
KW1900614 KW1900618
KW1900613
Features: Features: Features:
• Suitable for Japanese,American and European cars • Design to check engine oil pressure in both cars and • To check the condition of automobile radiator
• Comprehensive kit of adaptors and fitting for most fuel trucks • Easy to check the leakage of radiator and the
injection system • Easy to read dual scale gauge condition of radiator cap
• 3-1/2” gauge with dual scale (psi and bar),reading from • Complete with 24” (600mm) oil proof hose with 1/8” • Suitable for all kind of car radiator
0-140psi and 0-10bar NPT • Include with 2 pcs cap adapter for testing the
pressure cap
PETROL ENGINE COMPRESSION TESTER KIT and WITH ADAPTOR DIESEL ENGINE COMPRESSION TESTER KIT
AUTOMOTIVE EQUIPMENT 23
AUTOMOTIVE SERVICE TOOLS
PART WASHER
Features:
• Convenient and easy for use
20 • Rugged welded steel
Gallon • Provide with basket and flexible hose for cleaning small parts.
Water and aqueous • Parts basket for snaking small parts in solvent
based solvent only • Self latching fuse linked fire cover
• Easily removable work self
PLASTIC CREEPER
Features :
• Ergonomic design is to make easy operation.
• Supplied with 6 wheel for easy maneuver
24 AUTOMOTIVE EQUIPMENT
AUTOMOTIVE SERVICE TOOLS
CABLE CONNECTION CABLE JUMPER
4m Cable Length
Features:
• Easy to use
Features: Packaging
• Power transfer from donor car to
flat car
• Power transfer via lighter socket
with out lift up the engine cap
• No installation requested, easy
to use
• Thermal protection from over heat
• Included fuse to protect the surge
current
Article No. KW1900898 Article No. KW1900888
Description Cable Connection 4m, 10A Description Cable Jumper 200A, 2.5m
Specification Specification
Cable Length (m) 4 Cable Length (m) 2.5
Capacity (A) 10 Capacity (A) 200
Packing Dimension L x W x H (mm) 190 x 70 x 200 Packing Dimension Dia. x H (mm) 250 x 60
Weight (kg) 1.5 Weight (kg) 1
BATTERY TESTER
Features:
• Quick and easy to indicate battery condition
• for Rated Voltage 2V,6V and 12V lead acid battery
BATTERY CHARGER
12V Output
Up to 12Amp
KW1900939
Features:
• Built-in-micro processor control KW1900531
• 3 stages high frequency change Reverse Connection
• Fault diagnose and alarm & Short Cut Protection Features:
• Full fault protection • Compact and easy to operate
• Suitable for all lead acid battery • Suitable for car service, workshop and other applications where the battery used
• DC 12V output up to 12Amp as power supply
Article No. KW1900939
Smart Battery Charger 12V Article No. KW1900531
Description
2A/6A/12A Description Battery Charger 5A - 30A, 6V - 72V
Specification Specification
Input Voltage (V/Hz/Ph ) 220/50/400 Input Voltage (V/Hz/Ph ) 220/50/1
Input power (W) 400 Input power (kVA) 2.56
Maximum rated current (A) 12 Class of Insulation F
Current (A) 2/6/12 Charging Voltage (V) 6 - 72
Capacity (Ah) 5-70 Charging Current (A) 5 - 30
Packing Dimension L x W x H (mm) 210 x 150 x220 Packing Dimension L x W x H (mm) 490 x 340 x 680
Weight (kg) 1.5 Weight (kg) 36
AUTOMOTIVE EQUIPMENT 25
AUTOMOTIVE SERVICE TOOLS
BATTERY CHARGER
Accessories:
Car charger input ; Test input Laptop adaptors AC charger input ; Clamp cable
DC 12V - 13.8V cable AC 220V - 240V jumper
output ; 15V 1A output ; 15V 1A
26 AUTOMOTIVE EQUIPMENT
AUTOMOTIVE SERVICE TOOLS
BATTERY CHARGER WITH JUMP STARTER
KW1900354
KW1900356
Features :
• Capable to be used as a Jump Starter
• Available in single, two and three phase for small-size to large-size vehicle
• Suitable for starter and charging device in vehicle repair workshops
• Capable to convert AC current to DC current
60 W
230 VAC 5W
230 VAC
Features 10032234 :
• Max 60W (11W Bulb)/230V AC
• 5m rubber cable with main plug
Features 10032235
• 5M rubber cable with main plug
• Unique design with on/off switch
• Clear casing made by polycarbonate
10032234 10032235
AUTOMOTIVE EQUIPMENT 27
AUTOMOTIVE SERVICE TOOLS
MANIFOLD GAUGE VACUUM PUMP
Features:
• Suitable for all kind of air
conditioning repair workshop
KW1900533/ KW1900534/ KW1900535
• To be used with Manifold Gauge
KW1900505 KW1900506
Article No. KW1900533 KW1900534 KW1900535
WITH 3pcs CHARGING HOSE Vacuum Pump Vacuum Pump Vacuum Pump
Description
1/3HP 1/2HP 3/4HP
Features: Specification
• Complete with 3pcs Charging Hose
Input Voltage (V/Hz/Ph) 220/50/1
• Suitable for R134A or R22 refrigerants
• Large scale for easy reading Flow Rate (ℓ/min) 100 170 226
Ultimate Vacuum (Pa) 5
Article No. KW1900505 KW1900506 Power (HP) /3
1 1
/2 /4
3
GAS ANALYZER
Standard Acc:
Standard Acc:
for 10174175, 10174176
10174174
10174175 10174176
Features:
• Outstanding accuracy, stability and durability Standard Acc:
• Outomatic temperature adjustment (2 - 8 min) • Probe, Probe hose, Fuse, Leak test cap, Spare filter, Power cord
• Durable performance that has passed a severe cold test at -10 0C • Built-in Printer, Printer paper, Communication cable for 10174175 and 10174176
28 AUTOMOTIVE EQUIPMENT
AUTOMOTIVE SERVICE TOOLS and LUBRICATION
DIESEL OPACITY SMOKE TESTER
Standard Acc: Features:
• Real-time smoke measurement ( %, k [m-1] )
• Response time of 0.5 second
• Auto-zero / span calibration function
• Portable and LED display
Article No 10174177
Description Diesel Opacity Smoke Tester
Measuring items “Smoke opacity ( %, k [m-1] ) RPM (option), °C (option)”
Optional Acc:
Principle Light extinction method (Partial-flow sampling type)
Light source Green LED(565nm)
Detector Photo diode
Range 0.0~100.0% (0.00~21.42m-1)
Accuracy Less than 1%
Warm-up time 3~6 minutes
Display time 4 times /sec
Power 220V / 110V AC 50/60Hz
Temperature -10~400C
Dimension L x W x H (mm) 450 x 200 x 425
Weight (Net/Gross) (kg) About 7 / 11
Standard Accesories Probe hose, Fuse, Power cord
“RPM/ Oil temp. meter, Handheld terminal,
Optional
Built-in printer, Standard filter”
Article No 10174178
Description Smoke Tester Diesel
Standard Accesories: Smoke sampling Air cylinder
- Remote Controller Sampling Volume 330 ±15cc
- Probe and Hose Display digital display
- Filter Paper Testing method standard contamination paper
Measurement range 0.0~100 %
Degree of indication Max, indication 2%
Min, Scale Value 0.1% (1/1000)
Power supply AC 220V / 50~60 Hz
Dimension L x W x H (mm) 330 x 360 x 370
Packing dimension L x W x H (mm) 360 x 380 x 380
Weight (Net/Gross) (kg) 15 / 18
MANUAL OIL DISPENSER PNEUMATIC OIL DISPENSER PNEUMATIC MOBILE OIL PUMP
Features:
• Supplied with trolley for
200 kg drum
• Digital Oil Flow Meter
• Connecting hose ½ inch
Features: diameter, 4 meter length
• Level gauge with metal guard Features:
• Double acting hand operated pump • Designed with 2 wheel
• 1.8 meters flexible hose wit metal spout and • 1.8 meters flexible hose
shu off valve • Level gauge with metal guard Article No. 10005735
Pneumatic Mobile Oil
Description
Article No. KW1900295 Pump Kit 5:1-15ℓ/m
Article No. KW1900293
Pneumatic Oil Specification
Manual Oil Description
Description Dispenser 3-8Bar, 24ℓ Compression Ratio 5:1
Dispenser 24ℓ
Specification Maximum Working
Specification 8
Tank (ℓ) 24 Pressure (Bar)
Tank (ℓ) 24
Working Pressure (Bar) 3-8 Air Consumption (ℓ/m) 330
Capacity (g/stroke) 200
Air Inlet Connection Tires valve Suction Tube Length (mm) 940
Hose Length (m) 1.8 Delivery Tube Suction Tube Diameter (mm) 42
Fitting Metal 3/4-1.8
Diameter-length (inch-m) Oil Flow Rate (ℓ/m) 15
Dimension Fitting Metal Inlet Connection (inch) 1/4
300 x 300 x 850
L x W x H (mm) Dimension L x W x H (mm) 300 x 300 x 850 Dimension L x W x H (mm) 950 x 770 x 1250
Weight (kg) 12 Weight (kg) 11 Weight (kg) 35
AUTOMOTIVE EQUIPMENT 29
LUBRICATION
AIR OPERATED OIL PUMP PNEUMATIC WALL MOUNTED OIL PUMP KIT WASTE OIL SUCTION
Optional Accessories
Feature:
• Designed with 5 : 1 ratio
air operated pump
KW1900350
Swivel
Wall Bracket Features:
• Suplied with 90 liter
tank and 8 liter
Feature:
• Designed with 5 : 1 ratio air transparant bowl
operated pump • Air pressured to clean
• With oil dip tay waste oil
• Digital oil flow meter • Large collection bowl
• Air pressure regulator ¼ inch with grid
Features:
• Equipped with 4m hose R2AT
¼ inch Features:
• Grease shut-off valve with • Equipped with 4m hose R2AT
flexible spout ¼ inch
• Grease specification max • Cover with diameter 310 mm
• Follower plate diameter 310 mm
NLGI grade 2
• Grease specification max NLGI
grade 2
30 AUTOMOTIVE EQUIPMENT
LUBRICATION
PRESSURE SPRAYER OIL HOSE REEL
Features: Features:
• Easy to use, operate and maintain • Automatically lock hose at desired
• Can be use to spray liquid with alkalines base • With swivel bracket to easy move
• Tank design with mounted two wheel castors
Hose Holder
Hose
Hose Holder
Features:
• Convenient to observe the oil level of the vacuum pump
Features: • Able to drain and collect the used oil to the oil tray
• Automatically identify flow direction • Big caster better fits for the uneven ground
• Easy and convenient.
• Monitor used and new oil level through a sight window.
• Special design of the back door leaves more storeage space for tools and parts.
• Configured with an unique nozzle which is aim to prevent extra oil spillage, Article No. 10174755
even if ther mechanic forget to shut the valve. Description AC Recovery R134a 14L 1PH 275W
Auto-3R
Specification
Mode Fully – automatic
Recovery speed / Recharge speed (Gmin) 180 ~ 350 / 800 ~ 1500
Article No. 10174754 Vacuum Speed (L/min) 60
Refrigerant tank available capacity (L) 14
Description ATF Auto Changer 25L 1PH 140W Auto
Electronic scale range (KG) 0 ~ 35
Specification
Oil bottle capacity (Ml) / Operating tem-
Oil Pump Power (Watt) 140 300 / 5 ~ 50
perature (°C)
Power Supply (V/PH/Hz) 220 / 1 / 50 Max. Working pressure (bar) / Low pressure
17.5 / Less than 1 bar
Max.Tank Volume (L) 25 protection
Equal Quantity Exchange Precision (ml) ± 100 Electronic scale precision (g) ± 10
Operating Temp. © -20 ~ +60º Compressor (watt) 275
Voltage (AC, V/Hz/ph) 220 / 50 / 1
Relative Humidity <85%
Packing Dimension L x W x H (mm) 600 x 550 x 1135
Packing Dimension L x W x H (mm) 560 x 530 x 1030
Weight G.W./N.W.(kg) 68/61 Weight G.W./N.W.(kg) 80 / 75
AUTOMOTIVE EQUIPMENT 31
AUTO LIFTING
BOTTLE JACK
Available Features:
5-50 Ton • Compact and rigid design for simple use
• Available for various capacity 5 – 50 ton
• Suitable for lifting many type of vehicle
HYDRAULIC JACK
Foot pedal
KW0500039 KW0500040 KW0500756
Features: Features KW0500040 and KW0500756: • Roller action and dual return springs design
• Compact and rigid design for simple use • Compact design for simple use • Flange body and oversizes body for easy use
• Hydraulic aligator type • Complete with universal joint for easy operation
• Suitable for workshop operation
Article No. KW0500039 KW0500040 KW0500756
Description Hydraulic Jack 2Ton Hydraulic Jack 3.5Ton Hydraulic Garage Jack 3T Low Type
Specification
Capacity (Ton) 2 3.5 3
Min.(mm) 135 145 95
Height Max.(mm) 310 500 445
Rise.(mm) 175 355 400
Dimension L x W x H (mm) 430 x 145 x 200 685 x 180 x 346 745 x 349 x 180
Weight (kg) 7 37 35
KW0500057 KW0500058
KW0500056
Features:
• Compact and rigid design for simple use • Equipped with 4 wheel for easy maneuver
• Hydraulic alligator type • Suitable for workshop operation
32 AUTOMOTIVE EQUIPMENT
AUTO LIFTING
TRANSMISSION JACK
TRANSMISSION JACK
KW0500561
KW0500444
Available
5/10Ton
KW0500477 KW0500564
Features: Features:
• Compact and rigid design for simple use • Compact and rigid design for simple use
• Suitable for lifting 4 wheel drive car, tractor or heavy trucks • Suitable for lifting heavy vehicle
AUTOMOTIVE EQUIPMENT 33
AUTO LIFTING
JACK STAND
3 Ton 6 Ton
Features:
• Compact and robust design for simple use
• Ratchet type for fine adjustment
• Solid steel handle, self locking ratchet
• Large saddle, unitized frame construction
Double safety pin
Article No. KW0500060 KW0501677
Description Jack Stand 3Ton (2pcs) Jack Stand 6Ton (2pcs)
Large area feet Specification
to resist sinking
Capacity (Ton) 3 6
into asphalt
min. (mm) 295 395
Height
max. (mm) 425 605
Dimension
210 x 190 x360 310 x 265 x 460
L x W x H (mm)
Weight (kg) 3.4 13.5
KW0500060 KW0501677
Features KW0500054:
Features 10061307:
• Hydraulic engine crane with load
• Folding design for easy
lever
• Make easy when repair engine
• 6 wheel construction for more
• Ball bearing wheels & castors
stability and easy rolling
10061307 • Eight position rotary head KW0500054 • Folds in half for easy storage
WHEEL DOLLY
Spr
ead Spr
ead
Features:
ch
• Vehicles can be lifted and moved easily
in
9 • Robust hydraulic cylinder with a capacity up to 680 kg ch
in
• 4 Castors for safe standing and easy moving 12
• Comfortable lifting via foot pedal
• Secure pin for maximum safety
10182741 • With bracket 10182742
34 AUTOMOTIVE EQUIPMENT
AUTO LIFTING
MOTORCYCLE and ATV LIFT TABLE FLOOR TYPE
Features:
• Hydraulic lifting mechanism
• 2 fixed wheels and 2 casters for extra manuverability
• Foot activated pump and release valve
Application:
• Suitable for Trail motorbikes, ATV and trikes
PNEUMATIC BIKELIFT
A
B
KW1900361 A
B
AUTOMOTIVE EQUIPMENT 35
AUTO LIFTING
PNEUMATIC BIKELIFT
Accessories :
Side Extension
Working Tools Tray
SCISSOR LIFT
Features:
• Design of High strength structure to ensure security
• Pneumatic unlocked and low noise
• Extendable platform design wide range of services
• Convenient for vehicle reparation and maintenance
36 AUTOMOTIVE EQUIPMENT
AUTO LIFTING
SCISSOR ALIGNER
Features: 10181710
• This is a plug-n-play surface mounted large platform scissor lift for alignment
service with 4000 KG lifting capacity.
• 180 mm minimum height, 1700 mm lifting height.
• Suit for four wheel alignment, optional turntable.
• Anti-surge protection.
• Durable one-piece platform.
• Reserved tracks for rolling jack, ready for tire service (optional- purchased separately).
Features :
• This is a four-post vehicle lift for alignment service with 4000 KG lifting
capacity for main unit 2000 KG lifting capacity for the rolling jack.
• Durable steel one-piece runway.
• Mechanical lock engaged automatically during lifting process.
• Electro-hydraulic lift, with cylinder located under one of the platforms
• Low profile platforms, with short drive-on ramps, can be for when fully
lowered, requires less space
• Safety rack installed in each column. Mechanical lock engaged
automatically in lifting process.
• Adjustable width between two platforms makes the lift more flexible
for different vehicles.
Include turntable
Include Jack Beam 2 Ton Manual Adopt Hight Packaging Dimension L x W x H (mm) Weight (kg)
for wheel alignment
Quality Pump
1. Post Lift 4390 x 725 x 705 1194
2. Manual Jack Beam 950 x 580 x 300 152
3. Turn Table 450 x 450 x 130 11
AUTOMOTIVE EQUIPMENT 37
AUTO LIFTING
TWO POST LIFT
10213489
10213488
Safety Features:
Standard Accessories:
Features:
Features: • No floor plate restrictions
• No floor plate restrictions • Electric safety locking system
• Manual safety locking system • Overhead crossover beam
• Overhead crossover beam • Electromagnetic lowering
• Driven by dual hydraulic cylinders • Adjustable lift pads
• Adjustable lift pads • Driven by dual hydraulic cylinders
• Steel wire rope equlizing cables
• Steel wire rope equlizing cables
38 AUTOMOTIVE EQUIPMENT
BODY REPAIR and TIRE SERVICE
HYDRAULIC BODY REPAIR KIT
KW0500062
Features :
• Suitable for all kind of motorcycle and car
• With 345mm hose length
• Maximum pressure until 220psi
AUTOMOTIVE EQUIPMENT 39
TIRE SERVICE
TIRE INFLATOR AUTOMATIC
Features:
• Full automatic airinflation and discharge Function
• LED pressure display,safety, accurate and easy operation
• High accuracy pressure sensor
• Buzzing and lighting alarm appears after finishing inflation
NITROGEN GENERATOR
Features:
Features: • LED Digital display for pres
• LED Digital display for pressure sure and time
and time • Full-automatic oil water filter
• Full-automatic oil water filter and and separator
separator • Automatic draining water out
• Automatic draining water out • Accumulated working time
• N2 purity analysis display display
10072153 10001596
40 AUTOMOTIVE EQUIPMENT
TIRE SERVICE
TIRE CHANGER
Optional Accessories:
• C l a m p i n g p r o t e c t o r
For Motorcycle (Plastic) 4Pcs
Features:
• Clamping Jaws are totally one step die casting
• Quick Air Booster, suitable for low profile tires
KW1901019 • The round column is used as air tank
• Manual Locking swing arm, convenient and fast
Adjustable clamp
AUTOMOTIVE EQUIPMENT 41
TIRE SERVICE
TIRE CHANGER PRO 1- ARM
For Car
Inside Clamping 14”-26” Outside Clamping 12”-23” Round Coloum Air Tank
Optional Accessories
Sport Bike Clamping
(10081151)
Features:
• Vertical arm positioning automatically and synchronous pneumatic locked at any
option position
• Semi automatic swing arm
• Clamping jaws are totally one step die casting
• Quick air booster, suitable for low profile tires
For Car
Features:
• Full Automatic Pneumatic tilting column
• Quick Air Booster, suitable for low profile tires
• Automatic mount/ demount head; no lever technology
• Vertical arm positioning automatically and synchronous pneumatic locked at
any optional position
42 AUTOMOTIVE EQUIPMENT
TIRE SERVICE
TIRE CHANGER BUS / TRUCK
Features:
• Hydraulic motor with pressure adjustment device
• Automatically fast turning
• Portable console, double speed of both pump and
rotating motor
• High perfomance, maximum safety, absolutely
universal application for quickly and convenient
to demount/mount various of tires as bus, truck, etc.
Features:
• Hydraulic motor with pressure adjustment device
• Automatically fast turning
• Portable console, double speed of both pump and rotating motor
• High perfomance, maximum safety, absolutely universal
application for quickly and convenient to demount/mount various
of tires as bus, truck, etc.
AUTOMOTIVE EQUIPMENT 43
TIRE SERVICE
WHEEL BALANCER
Optional Accessories:
10213820
Shaft 10mm Motor Cycle Adaptor
Features:
• High precision axis perfoms better accuracy and repeatability
• High accurate and high stability of integrated circuit
• Capable for car wheel balancer
• LED numeric display screen
• Self-calibration and self-diagnosis test
Article No. KW1900975
Description Wheel Balancer 10-24” Car-Motor 200W
Specification
(inch) 10 – 24
Rim Diameter
(mm) 254 – 610
(inch) 1.5 – 20
Rim Width
(mm) 40 – 508
Max. Wheel Weight (kg) 65
Motor Power (watt) 200
Power Supply (V/PH/Hz) 220 / 1 / 50
Balancing Accuracy (g/oz) ± 1 / 0.04
Balancing Speed (rpm) <200
Measuring Time (s) <10
Noise Level (dB) <70
Packing Dimension L x W x H (cm) 91.5 x 76 x 123
Weight G.W./N.W.(kg) 122 / 88
5 Balancing Modes
Features:
• High precision main shaft ensures repead measuring accuracy
• Automatic distance and wheel diameter measuring
• Tracking sticking balancing mode can locate weight precisely and rapidly
• With self calibration and self diagnostic functions
• LED light & digital display
• Bigger machine body
44 AUTOMOTIVE EQUIPMENT
TIRE SERVICE
WHEEL BALANCER
Features:
• Suitable for tyres of truck and bus
• Memory of measured data and error self-test function
• Various balancing modes for different tyres
• Manually –operated distance and wheel diameter input
• Equipped with brake pedal function to locate the imbalance point accurately
• Deluxe design.Bigger machine cabinet with thicker material.Bigger and higher
steel bottom stand can protect inside chips from moisture and coldness so as to
make machine running stable
• Pneumatic tyre lifting platform can mount tyre conveniently and balance various
big tyres easily.
WHEEL ALIGNMENT
Standard Parts
Features:
• Machine in the factory with valid calibration and it is not necessary to perfom
calibration at the customer site.
• The camera bar tracks four targets automaticlly, more convenient and widespread
Front wheels calibration measurement in shorter time.
• Free from the influence of ambient light and temperature, stable and reliable.
• Accuracy calculates the entire vehicle angle by two high precision cameras.
• Auto compensation with special clamps and no need to rool the vehicle.
• Lenovo (IBM) computer high stabilily with Dual-Core CPU & 19 LCD monitor
• One key recovery and update one key restore, backup or update the system
Car calibration automatically
Article No 10174757
Description Wheel Alignment 3D Auto- Lift Fixed Base
Specification
Appellation Measuring Range Accuracy
Display Accuracy 1°/ 0,01° / 0.1 mm
Camber ± 10° ± 2°
Caster ± 20° ± 6°
King – Pin (SAL) ± 20° ± 6°
Toe ± 20° ± 2°
Set Back ± 5° ± 2°
Trust Angle ± 5° ± 2°
Track Width (mm) 1800 ±2
Wheel Base (mm) 3300 ±2
Weight G.W./N.W.(kg) 218 / 190
Packing Dimension (L x W x H) (mm):
690 x 810 x 1160 / 2880 x 430 x 430 / 325 x 275 x 1480
Body / Camera Rod Complete / T Column
AUTOMOTIVE EQUIPMENT 45
46 AUTOMOTIVE EQUIPMENT