Beruflich Dokumente
Kultur Dokumente
GUIDE
AKAI PRO AFX
Installation and Setup
The Akai Pro AFX is a class compliant USB plug and play device and
requires no further driver installation.
NOTE: The Akai Pro AFX is an additional controller that will only work in
addition to supported Serato DJ hardware.
14
2
3 15
4
SEARCH PITCH SFX
5
1 2 1 2
FX1 FX1
6 16
FX2 FX2
7
8 FX3 FX3
9 17
TAP TAP
10 18
11 19
SHIFT SHIFT
12
CUES AUTO MANUEL SLICER SAMPLER
13
NOTE: The SHIFT button is used with other buttons that have shift modifier functions.
• SAMPLER: Pads 1-3 trigger samples loaded in SP-6 slots 1-3. Pads
5-7 trigger samples loaded in slots 4-6. Use the PARAMETER knob to
The performance pads have ten different modes you can select. The first adjust SP-6 Sampler Volume. Holding SHIFT and using the PARAMETER
five are activated by pressing the mode buttons once, the second five are knob will cycle through your Sample Banks. Holding SHIFT + Pressing
activated by pressing the mode buttons a second time. For reference below PARAMETER will Mute the Sampler. Holding SHIFT and pressing pads
the pads are numbered 1-8 from the top left pad moving to the right. 1-3 & 5-7 will stop the sample playing. When a sample slot is empty,
pressing the pads 1-3 & 5-7 + SHIFT will load the currently selected
• CUES: In CUES mode pressing pads 1-8 will add up to 8 Cue Points. track in library panel to the corresponding sample slot. Press SHIFT +
Holding SHIFT and pressing buttons 1-8 will delete the Cue Points. Press SAMPLER to enable Velocity mode. There are also 2 sampler modifier
CUES a second time to activate CUE LOOP mode. In CUE LOOP mode modes:
Pressing a cue will play from that cue and activate a loop roll. Loop roll • Cycle Playback Type – Holding pad 4 and pressing one of the
size can be changed with the PARAMETER browser knob. sampler slots will change the playback type of the sample from One
Shot/Toggle/Hold.
• AUTO: In AUTO mode, pressing pads 1-8 will activate Auto Loops of • Loop Sample – Holding pad 8 and pressing one of the sample slots
different sizes. Pressing AUTO a second time activates LOOP ROLL will cycle the playback type to LOOP and Single Play for that slot.
mode. Pressing pads 1-8 activate different loop roll lengths. When a sample is playing and looped the playing Pad LED should flash.
Looping Manual Looping
Manual Looping enables you to manually set the length of your loops, save
your loops as well as launch previously saved loops. Activate Manual Loops in
You have up to 8 loops per track in Serato DJ, and the choice between
the MANUAL performance mode on your controller
either manual or auto loops. When using the Akai Pro AFX the different
looping modes, AUTO mode, ROLL mode, MANUAL modes can all be
SEE PERFORMANCE PADS FOR MORE INFORMATION.
activated and controlled via the performance pads.
Press MANUAL mode twice to enter Flip performance pad mode. Pressing
AFX Control Serato DJ function Shift pads 1-6 will trigger saved Flips, pressing SHIFT + pads 1-6 will turn saved
FX A Assigns FX Unit A to Assigns FX Unit A to Channel Flips on/off. Pressing an empty Flip slot will save any active Flip to that slot.
ASSIGN Channel 1, 2 3, 4
For more information on Flip, go to http://serato.com/dj/flip
FX B Assigns FX Unit B to Assigns FX Unit B to Channel
ASSIGN Channel 1,2,3,4 3, 4
FX 1-3 On/ Turns effect on and adjusts FX slot select (Multi FX mode)
Off effect parameters
TAP Tap to the desired FX Toggle FX mode (Single/Multi)
tempo. Press and hold to
return to AUTO mode.
BEAT knob Adjust FX beats multiplier Adjust FX beats multiplier
MIDI Using the Tool Tips
The MIDI control feature in Serato DJ provides the ability to map Serato DJ Click on the icon to enable Tool Tips. This is located in between the MIDI
software functions to MIDI controller functions such as keyboards, triggers, and setup button in the top right hand corner of the screen. Tool Tips provide
sliders, and knobs. Integrating MIDI controllers into your Serato DJ setup can a handy way to learn the various features of Serato DJ.
improve live performance usability, such as hitting pads on a MIDI controller
to trigger Loops and Cue Points.
Move the mouse over a section of the screen to bring up a context sensitive
tool tip. Holding the mouse over the button with Tool Tips turned on will
For more information download the Serato DJ manual by going to http://
show you a list of all keyboard shortcuts.
serato.com/dj/downloads
For more information about how to use Serato DJ, please go to our website
NOTE: You can not MIDI Map your Akai Pro AFX, you will need to connect
www.serato.com or refer to the Serato DJ Software Manual. For more informa-
an additional MIDI controller to use these MIDI functions.
tion on your controller, please refer to the hardware manual.