Beruflich Dokumente
Kultur Dokumente
Yoshi Ohno
Director of CIE Division 2
Member of ANSI C78-09, IESNA TPC
Optical Technology Division
National Institute of Standards and Technology
Gaithersburg, Maryland USA
LED luminaires
Methods using
• Sphere-spectroradiometer
• Sphere-photometer
• Goniophotometer
4 π geometry 2 π geometry
4 π geometry 2 π geometry
9.3.7 Calibration
calibrated against the illuminance or luminous intensity
standards traceable to national standards
shall be validated by measurement of total luminous flux
standard lamps traceable to national standards.
50,000 h) so it is Model 4
Model 5
Model 6
Model 7
predicted by Data
extrapolation.
Case Temperature
Ts = Tx
1.0
Relative luminous flux
T1
Fitting and
T2 extrapolation
TX
T3
0.7
<LED manufacturer>
• LEDs measured in
production.
• LEDs are measured
with short pulses.
• LEDs are binned and
rated at Tj=25°C. <Lighting industry>
• LEDs in luminaires are hot
(Tj= 60 °C to over 100°C)
LED performance • Photometric measurements
varies with Pulse
vs. in steady DC mode.
temperature DC ?
(a) (c)
(b)
Optical Technology Division 23
LM-xx
Method using a sphere-spectroradiometer
2 π geometry 4 π geometry
(for small spheres) (for large spheres)
2 π geometry 4 π geometry
(for small spheres) (for large spheres)
Contact: ohno@nist.gov