Beruflich Dokumente
Kultur Dokumente
Reason for
To continue supplying parts
Modification
A.B.C. Inter- Part needed for replacement by new part Parts Catalog
Draw Old Parts New Parts Q’ty Used
Description change-
No. No. No. Old → New
Rank ability Part No. Description Index No. Page
* New Index
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly par t as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine,and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 39 Page 2 of 3 ISSUED ON: July 31, ’91
DETAILS OF MODIFICATION
According to the M200/M201 MB No.31, the following parts were changed to standardize with the M210.
X/X
P/N 52163180 P/N AD031130
O/O (As a set)
X/X
P/N 52163141 P/N A0273141
However, P/N 52163180 (black development roller) is no longer available. To continue supplying parts to the
field, P/N 52169505 has been registered as a service part instead of P/N 52163180.
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 39 Page 3 of 3 ISSUED ON: July 31, ’91
Reason for
Vendor Change
Modification
Due to vendor change, the part number of the cooling fan motor has been changed. The interchangeability is O/O.
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 40 Page 2 of 2 ISSUED ON: December 15, ’91
Reason for
To facilitate manufacturing
Modification
A.B.C. Q’ty Used Inter- Part needed for replacement by new part Parts Catalog
Draw Old Parts New Parts
Description Old → change-
No. No. No.
Rank New ability Part No. Description Index No. Page
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly par t as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine,and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 41 Page 2 of 3 REISSUED ON: April 30, ’92
DETAILS OF MODIFICATION
To facilitate manufacturing, the configuration of the tray magnet has been changed as shown in the illustration. Also, the material
of the magnet has been changed from ferrite to rubbermagnet.
4mm 3.5mm
8mm
5.5mm
Old New
The interchangeability of the magnet itself is X/X.
However, the interchangeability of the paper tray ass’y (Index 85, including the paper tray magnet) as shown in the illustration is
O/O (The part number is not changed.)
Paper Tray Magnet
85 (Paper Tray Ass’y)
53
41
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 41 Page 3 of 3 REISSUED ON: April 30, ’92
Reason for
To instruct the customer to install the development unit properly
Modification
A.B.C. Inter- Part needed for replacement by new part Parts Catalog
Draw Old Parts New Parts Q’ty Used
Description change-
No. No. No. Old New
Rank ability Part No. Description Index No. Page
* New Index
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly par t as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine,and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 41 Page 2 of 3 ISSUED ON: March 31, ’92
DETAILS OF MODIFICATION
When the upper unit is opened and closed after the development unit is set
improperly, the front (P/N A0273160) and rear (P/N A0273162) development
guides may be damaged.
To instruct the customer to install the development unit properly, the caution
decal (P/N A0274879) has been added to the lower front cover as shown.
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 41 Page 3 of 3 ISSUED ON: March 31, ’92
Reason for
Customs clearance (Taiwan)
Modification
To clear this copier through Taiwanese customs, the Chinese operating instructions now have
to be included in the machine carton box. Please add the following part number to your parts
catalog.
T. I\, Manage‘Copier
Technical Support
MODIFICATION BULLETIN NO. 43 Page 2 of 2 ISSUED ON: August 15, ’92