Table 73 Abbreviations and Acronyms Acronym Description A & I Application and Installation A component identifier is a diagnostic code that informs the service personnel of specific component CID of system failure. CDL Cat Data Link Controlled Throttle Shifting CTS CTS significantly reduces power train stress and clutch wear by controlling engine speed, torque converter lockup, and transmission clutch engagements. Electronic Control Module The ECM provides improved emission, performance, advanced troubleshooting, and diagnostic ECM capabilities. The ECM houses a microprocessor and reads inputs from several sources such as pressure sensors. The ECM determines the correct course of action and then implements the actions through outputs such as controlling the clutch pressure or turning on the backup alarm. Caterpillar Electronic Technician ET is an electronic service tool that is used with the electronic controls to display fault codes, setup ET features, display parameter values, and perform diagnostics. ET requires a personal computer with ET software installed on the computer. ET uses a Caterpillar Communication Adapter or MPSI Pro-Link with Caterpillar Cartridge in order to translate from the Vehicle ATA Data Link to the computer RS-232 port. Individual Clutch Modulation ICM ICM is a clutch control design that ensures constant shift times even when the oil is cold. OEM Original Equipment Manufacturer Pulse Width Modulated PWM PWM is a signal from a sensor. The signal from the throttle position sensor is PWM. TBU Transmission Business Unit TSG Technical Standards and Guidelines
Disclaimer Part Numbers
Legal The listed part numbers are subject to change.
Consult Caterpillar about the current part number of Although Caterpillar exercises all reasonable effort the specific part. to assure that the products perform properly in the OEMs equipment, the responsibility for the Confidentiality installation is the OEMs, and Caterpillar assumes no responsibility for deficiencies in the installation. The information contained within this document is classified as Caterpillar Confidential Information. Any The installers are responsible for considering and reproduction, dissemination, or use of this information avoiding possibly hazardous conditions that could is forbidden without the prior express written consent develop from the systems involved in the specific of an authorized Caterpillar representative. All rights installation. The suggestions provided in this guide are reserved. regarding avoidance of hazardous conditions apply to all applications and are necessarily of a general nature since only the installer is familiar with the details of the installation. The suggestions provided in this guide should be considered general examples only and are in no way intended to cover every possible hazard in every installation.