Beruflich Dokumente
Kultur Dokumente
cnc1eng.txt
*******************************
START Menu Section
*******************************
/50011200 "&File"
&File
/50011201 "&Send"
&Send
/50011202 "&Receive"
&Receive
/50011329 "Edit NC F4"
Edit NC F4
/50011203 "&Create job list"
&Create job list
#Comments: Job list => List of the tasks
/50011204 "&Remote DNC"
&Remote DNC
#Comments: Remote => Wireless;
/50011205 "&Stop"
&Stop
/50011206 "Recent File"
Recent File
/3002 "Exit"
Exit
/50011210 "&Settings"
&Settings
/50011211 "&Languages"
&Languages
/50011212 "&Machine Settings"
&Machine Settings
/50011213 "Parts Path"
Parts Path
#Comments: Path => Track to parts' location
/50011220 "&Help"
&Help
/50011221 "&About DNC..."
&About DNC...
/852 "Snap Intersection\tF7"
Snap Intersection\tF7
/855 "Snap End\tF9"
Snap End\tF9
#Comments: End => here: endpoint of the entity
/858 "Snap Center\tF10"
Snap Center\tF10
/861 "Snap Auto\tF11"
Snap Auto\tF11
#Comments: Snaps automatically
/864 "Snap Perp\tAlt+F6"
Snap Perp\tAlt+F6
#Comments: Perp => abbreviation of "perpendicular"
/867 "Snap Tangent\tAlt+F7"
Snap Tangent\tAlt+F7
#Comments: Tangent => here: tangential
/868 "Snap Part\tAlt+F8"
Snap Part\tAlt+F8
/870 "No Snap\tF12"
No Snap\tF12
#Comments: Doesn't snap
/851 "Snap Nearest\tAlt+F9"
Snap Nearest\tAlt+F9
#Comments: Snaps to the nearest position (endpoint, centre, intersection, etc)
/853 "Two Entities Intersection\tAlt+F10"
Two Entities Intersection\tAlt+F10
#Comments: Snaps to the intersection of two entities (or their extrapolated inte
rsection)
/1 "File"
File
/3302 "New"
New
/2 "New Part\tCtrl+N"
New Part\tCtrl+N
/3 "New Nest"
New Nest
/1026 "New Tube"
New Tube
/4078 "Open"
Open
/4 "Open Part\tCtrl+O"
Open Part\tCtrl+O
/5 "Open Nest"
Open Nest
/1024 "Open Tube"
Open Tube
/6 "Save\tCtrl+S"
Save\tCtrl+S
/7 "Save As\tCtrl+A"
Save As\tCtrl+A
/30857 "Convert to NST File"
Convert to NST File
/15074 "Run Parametric File"
Run Parametric File
/15075 "Open Order File"
Open Order File
#Comments: Order => request
/8 "Insert Sub-Part"
Insert Sub-Part
/9 "Save Sub-Part"
Save Sub-Part
/23 "AutoNest"
AutoNest
#Comments: AutoNest => Automatical Nesting
/30757 "Export to AutoNest"
Export to AutoNest
/10 "Post-Process\tN"
Post-Process\tN
#Comments: Generation of the NC code
/11 "Send to Diskette"
Send to Diskette
/12 "Send to Machine"
Send to Machine
#Comments: Sends NC code to the chosen machine
/13 "Simulation\tCtrl+M"
Simulation\tCtrl+M
/22 "Edit NC\tCtrl+G"
Edit NC\tCtrl+G
/14 "Import...\tCtrl+I"
Import...\tCtrl+I
/15 "Export...\tCtrl+E"
Export...\tCtrl+E
/24 "CAD Link"
CAD Link
/25 "SolidEdge"
SolidEdge
/26 "SolidWorks"
SolidWorks
/27 "Inventor"
Inventor
/31036 "Run Bending Program"
Run Bending Program
/18 "Batch Mode"
Batch Mode
#Comments: Sending files from AutoNest to cncKad in order to create NC code
/30635 "Print Part Report..."
Print Part Report...
/30636 "Print Preview Part Report..."
Print Preview Part Report...
/16 "Print...\tCtrl+P"
Print...\tCtrl+P
/17 "Print Preview"
Print Preview
/20 "Recent Files"
Recent Files
/21 "Exit\tAlt+F4"
Exit\tAlt+F4
/31 "Edit"
Edit
/5000281 "Undo\tCtrl+Z"
Undo\tCtrl+Z
/5000282 "Redo\tCtrl+Y"
Redo\tCtrl+Y
/34 "Delete Last\tCtrl+F2"
Delete Last\tCtrl+F2
/36 "Delete Entities\tAlt+F2"
Delete Entities\tAlt+F2
/37 "Delete CAMs\tAlt+F3"
Delete CAMs\tAlt+F3
#Comments: CAM => shortcut of "Computer Aided Manufacture"; punches/cuts
/38 "Delete Dims\tAlt+F11"
Delete Dims\tAlt+F11
#Comments: Dims => shortcut of "dimensions"
/39 "Delete Help-Lines\tAlt+F5"
Delete Help-Lines\tAlt+F5
/40 "Split"
Split
#Comments: Divide, separate
/41 "Join\tAlt+J"
Join\tAlt+J
/42 "Chamfer (Cut Corner) \tAlt+Q"
Chamfer (Cut Corner) \tAlt+Q
#Comments: Cut a sloping edge
/43 "Fillet (Round Corner)\tAlt+F"
Fillet (Round Corner)\tAlt+F
#Comments: Make the corner round
/44 "Single"
Single
/45 "Contour"
Contour
/46 "All Part"
All Part
/47 "Trim\tAlt+T"
Trim\tAlt+T
#Comments: Cut off
/48 "Extend\tAlt+E"
Extend\tAlt+E
#Comments: Enlarge, lengthen
/49 "Notch\tAlt+N"
Notch\tAlt+N
/54 "Bend Relief"
Bend Relief
#Comments: Embossment of the bended element
/53 "Change Attribute"
Change Attribute
#Comments: Attribute => characteristic
/15212 "Selection Filter..."
Selection Filter...
#Comments: Choosing the filter
/60 "View"
View
/61 "Toolbar..."
Toolbar...
/62 "Status Bar Enabled"
Status Bar Enabled
#Comments: Enabled => turned on; shown
/63 "Status Bar On Top"
Status Bar On Top
#Comments: On Top => located on the top of the screen;
/74 "Auto Scroll Enabled"
Auto Scroll Enabled
#Comments: Scrolling => turning the mouse wheel over and over
/64 "Redraw\tF2"
Redraw\tF2
/31037 "Show End Points"
Show End Points
/65 "Zoom Part\tF5"
Zoom Part\tF5
/66 "Zoom Sheet\tCtrl+F5"
Zoom Sheet\tCtrl+F5
/67 "Zoom Window\tF6"
Zoom Window\tF6
#Comments: Zoom the area that falls inside the selection window
/68 "Zoom In\tF3"
Zoom In\tF3
/69 "Zoom Out\tF4"
Zoom Out\tF4
/73 "Zoom Previous"
Zoom Previous
/77 "Zoom Realtime"
Zoom Realtime
#Comments: Realtime => at the same time as when it happens
/78 "Pan Realtime"
Pan Realtime
#Comments: Pan => move slowly
/70 "Ask\tF8"
Ask\tF8
/71 "Check"
Check
/50 "Measure"
Measure
/51 "From Base Point"
From Base Point
#Comments: From one point to various points
/52 "Point To Point"
Point To Point
/72 "CAM Mode\tCtrl+V"
CAM Mode\tCtrl+V
/75 "Full Cut Tool Width\tCtrl+B"
Full Cut Tool Width\tCtrl+B
#Comments: Shows the full width of the cutting tool
/76 "Rapid Tool Path\tAlt+B"
Rapid Tool Path\tAlt+B
#Comments: Path => The way the tool makes moving from one place to another
/4765 "Show Shear Scrap\tCtrl+H"
Show Shear Scrap\tCtrl+H
#Comments: Scrap => Sheet leftovers
/30416 "Multi Colored Tools"
Multi Colored Tools
/30458 "Fill Tools"
Fill Tools
/30637 "View Dies' Modes"
View Dies' Modes
/30638 "Do Not Show"
Do Not Show
/30010 "Show Dies Only During Ask"
Show Dies Only During Ask
/30639 "Show For Close To Clamp Tools"
Show For Close To Clamp Tools
/30640 "Show For All Tools"
Show For All Tools
/30758 "Colored Tool Path By Speed"
Colored Tool Path By Speed
#Comments: Path => The way the tool makes moving from one place to another
/30759 "Show Clamps Bar"
Show Clamps Bar
/31118 "Display Bend Lines"
Display Bend Lines
/79 "Draw"
Draw
/80 "Line"
Line
#Comments: Long thin mark
/81 "Auto-Snap\tL"
Auto-Snap\tL
#Comments: Automatic snap
/82 "Tang-Tang"
Tang-Tang
#Comments: Tang => shortcut of "tangent"
/83 "Tang-Perp"
Tang-Perp
#Comments: Perp => shortcut of "perpendicular"
/84 "Help-Line"
Help-Line
/85 "Parallel at Distance\tAlt+D"
Parallel at Distance\tAlt+D
#Comments: Line parallel to another line separated from it through a defined dis
tance
/86 "Parallel Through Point"
Parallel Through Point
#Comments: Line passing through defined point,is parallel to another line
/87 "Perpendicular"
Perpendicular
/88 "By Angle - Absolute"
By Angle - Absolute
/89 "By Angle - Relative"
By Angle - Relative
/90 "Two Points"
Two Points
/91 "Vertical\tAlt+V"
Vertical\tAlt+V
/92 "Horizontal\tAlt+H"
Horizontal\tAlt+H
/93 "Arc"
Arc
/94 "2 Points, Radius..."
2 Points, Radius...
/95 "Center, Radius, 2 Angles..."
Center, Radius, 2 Angles...
/96 "2 Points, Included Angle..."
2 Points, Included Angle...
/97 "Point, Center, Included Angle..."
Point, Center, Included Angle...
/98 "3 Points"
3 Points
/99 "Tang (Point), Tang (Point), Radius..."
Tang (Point), Tang (Point), Radius...
#Comments: Tang => abbreviation of "tangent"
/102 "&Point"
&Point
/101 "Circle...\tAlt+Ctrl+D"
Circle...\tAlt+Ctrl+D
/4433 "Shapes"
Shapes
/103 "Rectangle...\tAlt+Ctrl+R"
Rectangle...\tAlt+Ctrl+R
/104 "Oval...\tAlt+Ctrl+O"
Oval...\tAlt+Ctrl+O
/105 "Single-D..."
Single-D...
/106 "Double-D..."
Double-D...
/107 "Trapeze (Connector)..."
Trapeze (Connector)...
/108 "Bolt Hole..."
Bolt Hole...
/109 "Banana..."
Banana...
/120 "Ellipse..."
Ellipse...
/110 "Punched Sheet"
Punched Sheet
#Comments: A sheet which was perforated with one tool
/15139 "Triangle..."
Triangle...
/121 "Polygon..."
Polygon...
/111 "Shape List"
Shape List
#Comments: List of shapes
/30101 "Edit Shape"
Edit Shape
/112 "Parallel"
Parallel
/113 "By Distance\tCtrl+D"
By Distance\tCtrl+D
/114 "Through Point"
Through Point
/115 "Dim/Text"
Dim/Text
#Comments: Dim => shortcut of "dimension"
/116 "Add Dim/Text"
Add Dim/Text
/117 "Edit Dim Text/Text"
Edit Dim Text/Text
/118 "Global Size Update"
Global Size Update
#Comments: Bringing all the sizes up to date
/119 "Move Dimension"
Move Dimension
/268 "Draw Linear Dimension"
Draw Linear Dimension
/269 "Draw Radius Dimension"
Draw Radius Dimension
/270 "Draw Diameter Dimension"
Draw Diameter Dimension
/271 "Draw Angle Dimension"
Draw Angle Dimension
/30760 "Replace Text"
Replace Text
/30761 "Text Size Update"
Text Size Update
/15017 "DFT Text"
DFT Text
/15018 "Place Text..."
Place Text...
/15019 "Create New Font..."
Create New Font...
/15020 "Edit Fonts..."
Edit Fonts...
/15225 "Windows Fonts"
Windows Fonts
#Comments: Fonts which exist in 'Windows' Operating System
/15193 "Spline"
Spline
/31039 "Bend Line"
Bend Line
#Comments: Line => long thin mark denoting bending
/31040 "Edit Bend Line"
Edit Bend Line
/31199 "Convert To Bend Line"
Convert To Bend Line
/130 "Transform"
Transform
/131 "Move\tAlt+M"
Move\tAlt+M
/132 "Absolute"
Absolute
/133 "Relative"
Relative
/4761 "Part"
Part
/134 "Copy\tAlt+C"
Copy\tAlt+C
/136 "Relative"
Relative
/137 "Rotate\tAlt+R"
Rotate\tAlt+R
/15122 "Rotate Part 90 Degrees"
Rotate Part 90 Degrees
/15125 "Rotate Part -90 Degrees"
Rotate Part -90 Degrees
/15127 "Rotate Part 180 Degrees"
Rotate Part 180 Degrees
/138 "Mirror\tAlt+I"
Mirror\tAlt+I
#Comments: Reflect
/15129 "Mirror Part &Horizontally"
Mirror Part &Horizontally
/15132 "Mirror Part &Vertically"
Mirror Part &Vertically
/139 "Stretch\tAlt+S"
Stretch\tAlt+S
#Comments: Extend
/140 "Scale"
Scale
#Comments: Change the magnitude
/141 "Array\tAlt+A"
Array\tAlt+A
/142 "Bottom Left --->0,0"
Bottom Left --->0,0
/31119 "Set Reference as 0,0"
Set Reference as 0,0
/143 "Offset Contour"
Offset Contour
/144 "Smooth"
Smooth
#Comments: Remove irregularities or roughness; make even
/145 "Part Array"
Part Array
/719 "Explode Multiple Part"
Explode Multiple Part
#Comments:
/150 "CAM"
CAM
#Comments: CAM => shortcut of "Computer Aided Manufacture"; punches/cuts
/151 "Cut CAM"
Cut CAM
#Comments: Cutting
/152 "Add Cut...\tAlt+Ctrl+C"
Add Cut...\tAlt+Ctrl+C
/30825 "Add Pierce..."
Add Pierce...
/30125 "AutoCut"
AutoCut
#Comments: AutoCut => automatical cutting
/153 "Edit Contour Entry"
Edit Contour Entry
#Comments: Edits the entry point of the laser beam onto the contour
/4570 "Auto Enter Point"
Auto Enter Point
#Comments: Automatically chooses the entry point of the laser beam
/154 "Connect"
Connect
/155 "Connect Two Cuts"
Connect Two Cuts
/156 "Disconnect Two Cuts"
Disconnect Two Cuts
/178 "Engrave Entities"
Engrave Entities
/158 "Engrave Text"
Engrave Text
/179 "Cut Text"
Cut Text
/4475 "Corner Technology"
Corner Technology
#Comments: The technology of processing of the corner
/4476 "Set..."
Set...
/272 "Cut Open Contours"
Cut Open Contours
/274 "Cutting Order"
Cutting Order
#Comments: Sequence of cutting
/275 "Auto"
Auto
#Comments: Auto => automatic
/31041 "Parts by Mouse\tAlt+Shift+O"
Parts by Mouse\tAlt+Shift+O
/277 "Parts by List"
Parts by List
/278 "Holes by Mouse"
Holes by Mouse
/279 "Holes by List"
Holes by List
/30641 "Cat-Eye..."
Cat-Eye...
/159 "Punch CAM"
Punch CAM
#Comments: Punching
/160 "Add Punch...\tAlt+Ctrl+P"
Add Punch...\tAlt+Ctrl+P
/161 "AutoPunch...\tAlt+Ctrl+A"
AutoPunch...\tAlt+Ctrl+A
#Comments: AutoPunch => automatical punching
/15006 "Set/Clear Last-Hit-On-Center"
Set/Clear Last-Hit-On-Center
/163 "Directional Punch"
Directional Punch
#Comments: Sets the direction of the punch
/164 "Uni-Directional"
Uni-Directional
#Comments: uni => one
/165 "Bi-Directional"
Bi-Directional
#Comments: bi => two
/31042 "Save As Predefined Shape"
Save As Predefined Shape
/15014 "Shear CAM"
Shear CAM
/15015 "Add Shear..."
Add Shear...
/15111 "Set Bin..."
Set Bin...
#Comments: Bin => place to which cut/punched parts will fall
/8519 "&Mill CAM"
&Mill CAM
/8520 "Add Pocket..."
Add Pocket...
#Comments: Pocket => dip downward
/167 "Edit Offsets"
Edit Offsets
/1506 "Set Offsets"
Set Offsets
/15008 "Set All Offsets"
Set All Offsets
/30011 "Change Tool For Existing Punches\tCtrl+T"
Change Tool For Existing Punches\tCtrl+T
/177 "Edit CAM\tE"
Edit CAM\tE
/15021 "Add MicroJoint\tShift+M"
Add MicroJoint\tShift+M
#Comments: MicroJoint => small connection
/15037 "Set Tool Sequence"
Set Tool Sequence
#Comments: Define arrangement of tools' usage
/162 "Common Cuts"
Common Cuts
/168 "Reposition and Transformation"
Reposition and Transformation
/169 "Push Out (Chute)"
Push Out (Chute)
#Comments: Open the chute
/170 "Add/Remove Stop Machine"
Add/Remove Stop Machine
/171 "Positioning (No CAM)"
Positioning (No CAM)
#Comments: Positioning of the turret without processing
/15179 "Cut Sheet"
Cut Sheet
/172 "Functions"
Functions
/173 "Punch/Cut"
Punch/Cut
/3325 "Edit"
Edit
/174 "Tool"
Tool
/175 "Program"
Program
/176 "Set Sheet and Clamps"
Set Sheet and Clamps
/15228 "Check Process"
Check Process
/721 "Set Program Origin"
Set Program Origin
#Comments: Set the position from which the processing will start
/30606 "Unload Part"
Unload Part
/30762 "Cutting Table"
Cutting Table
#Comments: Table => chart
/31201 "Adjust Travel Path"
Adjust Travel Path
#Comments: Path => The way the tool makes moving from one place to another
/31202 "Restore Default Clamps"
Restore Default Clamps
/180 "Nest"
Nest
/181 "Load and Place"
Load and Place
/182 "Pick and Place"
Pick and Place
/183 "Delete Part"
Delete Part
/184 "Move Part"
Move Part
/1188 "Get Part Information\nAsk Part "
Get Part Information\nAsk Part
/185 "Nest Array"
Nest Array
#Comments: Array => placing in some sequence
/30012 "Split Array"
Split Array
/187 "Set Parts' Order"
Set Parts' Order
#Comments: Order => sequence
/31043 "By Mouse\tCtrl+Shift+O"
By Mouse\tCtrl+Shift+O
/3951 "Order by List"
Order by List
#Comments: Order => Make a sequence
/186 "Nest Data"
Nest Data
/30642 "Part Instance Data"
Part Instance Data
/188 "Explode to Sheet"
Explode to Sheet
#Comments: Explode => Divide, split, break to pieces
/191 "Copy Part Contour to Sheet"
Copy Part Contour to Sheet
/503 "Update Parts"
Update Parts
/200 "Tools"
Tools
/201 "Edit Tool Library\tT"
Edit Tool Library\tT
/202 "Used Tools...\tU"
Used Tools...\tU
/203 "Create a Special Tool File"
Create a Special Tool File
/204 "Turret Setups"
Turret Setups
/30763 "Convert Old Boschert Tools"
Convert Old Boschert Tools
/31203 "Estimation"
Estimation
/3565 "Settings"
Settings
/50011300 "Machine Settings"
Machine Settings
/30252 "Workspace Settings..."
Workspace Settings...
/30988 "Report Settings..."
Report Settings...
/212 "Languages..."
Languages...
/213 "Set &Font..."
Set &Font...
/403 "Set Working Units..."
Set Working Units...
#Comments: Select the unit system you want to use (mm/inches)
/220 "Help"
Help
/223 "cncKad Help\tF1"
cncKad Help\tF1
/224 "Context Help"
Context Help
/31206 "Play cncKad Movies"
Play cncKad Movies
/728 "Send Problem Report"
Send Problem Report
/222 "About cncKad..."
About cncKad...
/301 "File"
File
/302 "New.."
New..
/282 "Open PPO File"
Open PPO File
/283 "Save File"
Save File
/284 "Save As"
Save As
/520 "Standard"
Standard
/288 "Debug"
Debug
#Comments: Repair errors in a file
/289 "Debug"
Debug
/290 "Go\tF5"
Go\tF5
/4835 "Step Into\tF11"
Step Into\tF11
/291 "Step Over\tF10"
Step Over\tF10
/292 "Run to Cursor"
Run to Cursor
/293 "Set next statement\tF12"
Set next statement\tF12
/294 "Stop debugging"
Stop debugging
/295 "Restart"
Restart
/296 "Toggle BreakPoint\tF9"
Toggle BreakPoint\tF9
#Comments: Breakpoint => decisive point;
/297 "Remove all breakpoints"
Remove all breakpoints
/309 "Execute"
Execute
#Comments: Perform, carry out
/502 "Update Sheet Quantities in DB"
Update Sheet Quantities in DB
#Comments: DB => abbreviation of Database
/300 "Verify"
Verify
/4844 "Run\tF7"
Run\tF7
/30065 "Remove Setup"
Remove Setup
/30102 "Add Directory"
Add Directory
/50001 "&File"
&File
/50002 "&New...\tCtrl+N"
&New...\tCtrl+N
/50003 "&Open...\tCtrl+O"
&Open...\tCtrl+O
/50004 "&Save...\tCtrl+S"
&Save...\tCtrl+S
/50005 "Save &As"
Save &As
/50008 "&Export to CAD-CAM Files..."
&Export to CAD-CAM Files...
/50009 "Import from CAD-CAM Files..."
Import from CAD-CAM Files...
/500010 "&Rectangular/Oval Parts... "
&Rectangular/Oval Parts...
/500011 "Create/Edit Filler Order File"
Create/Edit Filler Order File
#Comments: Filler => small parts which can fill in the free space in the nest; o
rder => request
/500012 "&Create/Load Order File..."
&Create/Load Order File...
#Comments: Order => request
/399 "Create Report (RPT) File"
Create Report (RPT) File
/537 "Parts DB"
Parts DB
#Comments: DB => abbreviation of Database
/30293 "Run Simulation"
Run Simulation
/50001200 "Generate NC for Current Nest"
Generate NC for Current Nest
/50001204 "Generate NC for All SubNests"
Generate NC for All SubNests
/30233 "Send to Destination"
Send to Destination
/500030 "Set Current Machine"
Set Current Machine
/500017 "Recent Files"
Recent Files
/5000280 "Edit "
Edit
/410 "Copy\tCtrl+C"
Copy\tCtrl+C
/742 "Cut\tCtrl+X"
Cut\tCtrl+X
/412 "Paste\tCtrl+V"
Paste\tCtrl+V
/413 "Delete\tDel"
Delete\tDel
/5000287 "Select All\tCtrl+A"
Select All\tCtrl+A
/5000196 "Toolbars..."
Toolbars...
/5000200 "&Redraw"
&Redraw
/5000208 "Zoom S&heet"
Zoom S&heet
/5000198 "Zoom In"
Zoom In
/5000199 "Zoom Out"
Zoom Out
/5000201 "&Zoom Window"
&Zoom Window
/5000202 "Zoom Previous"
Zoom Previous
/5000203 "&Display Parts on Sheet..."
&Display Parts on Sheet...
/5000204 "Measure Mode"
Measure Mode
/30356 "Selection Mode"
Selection Mode
/31081 "Show Remain Parts Only"
Show Remain Parts Only
/500031 "&Part"
&Part
/30328 "Qty Order..."
Qty Order...
#Comments: Qty => shortcut of "quantity"; Order => request made by costumer
/500054 "&Array..."
&Array...
/500053 "D&uplicate...\tCtrl+D"
D&uplicate...\tCtrl+D
/500052 "&Remove...\tCtrl+R"
&Remove...\tCtrl+R
/500036 "Up"
Up
/500037 "Down"
Down
/682 "Left"
Left
/681 "Right"
Right
/500040 "Left+Down"
Left+Down
/500041 "Left+Up"
Left+Up
/415 "Right+Down"
Right+Down
/416 "Right+Up"
Right+Up
/500042 "Axis X Mirror"
Axis X Mirror
/500043 "Axis Y Mi&rror"
Axis Y Mi&rror
/691 "Rotate"
Rotate
/500044 "Rotate 90"
Rotate 90
/500045 "Rotate 180"
Rotate 180
/409 "Rotate 90 Clockwise"
Rotate 90 Clockwise
/500046 "Shoot Mode"
Shoot Mode
#Comments:
/3645 "Rotate Mode"
Rotate Mode
/30066 "Rotate by Local Center Mode"
Rotate by Local Center Mode
/500048 "Limit Rotation"
Limit Rotation
/5000491 "&Edit Part..."
&Edit Part...
/406 "Edit Part in cncKad"
Edit Part in cncKad
/494 "Update Part"
Update Part
/30804 "Rotate to Best Angle"
Rotate to Best Angle
/30828 "Replace Part"
Replace Part
/500033 "&Global Info..."
&Global Info...
#Comments: Info => shortcut of "information"; General information
/30673 "Parts' Quantity"
Parts' Quantity
/500032 "Part &Info...\tCtrl+l"
Part &Info...\tCtrl+l
#Comments: Info => shortcut of "information"
/30674 "Mark All Unloaded Parts"
Mark All Unloaded Parts
/3380 "Sheet"
Sheet
/50001000 "&Clear Sheet\tCtrl+G"
&Clear Sheet\tCtrl+G
/500057 "Set as Remnant"
Set as Remnant
#Comments: Remnant => unused portion
/50001001 "Remove All Remnants"
Remove All Remnants
/500058 "Set Sheet and Clamps..."
Set Sheet and Clamps...
/125 "Move Clamps"
Move Clamps
/500065 "Sheet Rotation"
Sheet Rotation
/500066 "Rotate 90 left"
Rotate 90 left
/500067 "Rotate 90 right"
Rotate 90 right
/500068 "Rotate 180"
Rotate 180
/31031 "Mirror Sheet - X Axis"
Mirror Sheet - X Axis
/30077 "Mirror Sheet - Y Axis"
Mirror Sheet - Y Axis
/30327 "Processing Order"
Processing Order
#Comments: Sequence of processing
/50001003 "Automatic Parts Order..."
Automatic Parts Order...
#Comments: Automatic arranging of the parts
/50001201 "Open in cncKad "
Open in cncKad
/50001202 "Open in cncKad as DFT"
Open in cncKad as DFT
/50001203 "Open in cncKad as NST"
Open in cncKad as NST
/500070 "&Grouping"
&Grouping
/500071 "Group"
Group
#Comments: Gather, classify
/500072 "&Ungroup"
&Ungroup
/500073 "Ungroup Selected Groups On Sheet"
Ungroup Selected Groups On Sheet
/500074 "Ungroup All Groups"
Ungroup All Groups
/5000100 "&Nesting"
&Nesting
/5000104 "Rerun Current SubNest"
Rerun Current SubNest
#Comments: Start the SubNest again
/5000115 "Start/Continue AutoNest (Next Sheet)"
Start/Continue AutoNest (Next Sheet)
/5000105 "&Fill holes"
&Fill holes
/5000109 "Nest Report"
Nest Report
/5000112 "New SubNest"
New SubNest
/50001020 "Delete SubNest"
Delete SubNest
/5000113 "Delete All SubNests"
Delete All SubNests
/5000114 "Select filler parts"
Select Filler Parts
#Comments: Filler parts => small parts which can fill in the free space in the n
est
/5000116 "Next SubNest"
Next SubNest
/5000117 "Previous SubNest"
Previous SubNest
/30294 "Sort SubNests"
Sort SubNests
/30389 "Workspace Setting"
Workspace Setting
/5000212 "Languages..."
Languages...
/5000220 "Help"
Help
/5000224 "AutoNest Help"
AutoNest Help
/5000222 "About AutoNest..."
About AutoNest...
/3654 "Part"
Part
/405 "Edit Part..."
Edit Part...
/30075 "Create DFT files for parts"
Create DFT files for parts
/408 "Placement"
Placement
/4410 "LEFT"
LEFT
/30073 "Mirror Sheet - X axis"
Mirror Sheet - X axis
/50001002 "Show Parts' Order"
Show Parts' Order
#Comments: Show the sequence of the parts
/50007040 "Group"
Group
/30867 "Group &Info...\aCtrl+I"
Group &Info...\aCtrl+I
/394 "Tree Items"
Tree Items
#Comments: Objects sorted as a tree structure
/656 "Delete"
Delete
/126 "Set as active Material filter"
Set as active Material filter
/128 "Generate NST files"
Generate NST files
/129 "Generate DFT files"
Generate DFT files
/135 "Generate NC for selected"
Generate NC for selected
/700 "File"
File
/703 "New\tCtrl+N"
New\tCtrl+N
/706 "Open...\tCtrl+O"
Open...\tCtrl+O
/709 "Save\tCtrl+S"
Save\tCtrl+S
/712 "Save As..."
Save As...
/715 "NC to DFT"
NC to DFT
/724 "Print Preview"
Print Preview
/730 "No cutting tool or model doesn't support cutting"
No cutting tool or model doesn't support cutting
/739 "Undo\tCtrl+Z"
Undo\tCtrl+Z
/745 "Copy\tCtrl+C"
Copy\tCtrl+C
/748 "&Paste\tCtrl+V"
&Paste\tCtrl+V
/751 "Insert Line"
Insert Line
#Comments: Line => row
/754 "Delete Line"
Delete Line
#Comments: Line => row
/757 "Insert Pattern"
Insert Pattern
#Comments: Inserts a G code (pattern) to NC code
/760 "Mark Punch/Cut"
Mark Punch/Cut
#Comments: Mark => indicate, point out
/30242 "Find Next"
Find Next
/30243 "Find Previous"
Find Previous
/806 "Beep"
Beep
#Comments: Make a short sound
/781 "Split"
Split
#Comments: Split => Divide
/802 "Mark Line"
Mark Line
#Comments: Mark => indicate, point out; Line => row (here: with NC code)
/805 "Ask"
Ask
/811 "Run\tF9"
Run\tF9
#Comments: Activate the simulation
/814 "Pause\tF8"
Pause\tF8
/817 "Quit Run\tF10"
Quit Run\tF10
/4534 "Tools"
Tools
/31112 "Edit Tools Library"
Edit Tools Library
/30006 "Edit Setup"
Edit Setup
/31238 "Check Stations"
Check Stations
/31239 "Simulator Settings"
Simulator Settings
/825 "Help"
Help
/828 "Help Topics"
Help Topics
/831 "About Simulation..."
About Simulation...
END Menu Section
*******************************
*******************************
START Dialog Section
*******************************
Dialog "Tool Sequence" (IDD_TOOL_SEQUENCE__SELECT)
*******************************
/3938 "Tool Sequence"
Tool Sequence
/3000 "OK"
OK
/3001 "Cancel"
Cancel
/4686 "Tool"
Tool
*******************************
Dialog "Shape Param" (IDD_SHAPE_PARM)
*******************************
/3266 "Shape Param"
Shape Param
#Comments: Param => shortcut of "parameter"
/3268 "Length:"
Length:
/3269 "Width:"
Width:
/3267 "Size"
Size
/3270 "Angle:"
Angle:
/3274 "Num Of Arcs"
Num Of Arcs
#Comments: Num => shortcut of "number"; amount
/29 "Use on:"
Use on:
/15078 "Circular Tube"
Circular Tube
*******************************
Dialog "Cat-Eye" (IDD_CATEYE_DLG)
*******************************
/30553 "Cat-Eye"
Cat-Eye
/3214 "None"
None
/30554 "Measuring an Outside Corner With The Cat-Eye"
Measuring an Outside Corner With The Cat-Eye
/30555 "Measuring an Internal Corner With The Cat-Eye"
Measuring an Internal Corner With The Cat-Eye
/30556 "Measuring Two Internal Corners With The Cat-Eye"
Measuring Two Internal Corners With The Cat-Eye
/30557 "Measuring a Round Hole With The Cat-Eye"
Measuring a Round Hole With The Cat-Eye
/30558 "Measuring Two Round Holes With The Cat-Eye"
Measuring Two Round Holes With The Cat-Eye
/30559 "Measuring a Round Hole And an Internal Corner With The Cat-Eye"
Measuring a Round Hole And an Internal Corner With The Cat-Eye
/30560 "Measuring an Outer Corner With The Distance Control System"
Measuring an Outer Corner With The Distance Control System
/30561 "Measuring Type"
Measuring Type
*******************************
Dialog "Text size update" (IDD_TEXT_SIZE_UPDATE)
*******************************
/30712 "Text size update"
Text size update
/30713 "Fixed Size"
Fixed Size
#Comments: Fixed => unchangeable, permanent
/30714 "Scale Factor"
Scale Factor
#Comments: scale => magnification
/30715 "Text:"
Text:
/30716 "Arrow:"
Arrow:
*******************************
Dialog "Replace" (IDD_FIND_REPLACE_TEXT)
*******************************
/30717 "Replace"
Replace
/30718 "Find:"
Find:
/30719 "Replace with:"
Replace with:
*******************************
Dialog "About DNC2006" (IDD_ABOUTBOX)
*******************************
/50011320 "Machine:"
Machine:
/30049 "status"
status
/50011321 "Port:"
Port:
#Comments: A place for connecting external devices to a computer
/50011322 "Baud:"
Baud:
#Comments: Unit of measurement for communication (transmission) speed
/50011323 "Send F2 \n PC->Machine"
Send F2 \n PC->Machine
/50011324 "Re-Send F3"
Re-Send F3
/50011325 "Receive F5 \n Machine->PC"
Receive F5 \n Machine->PC
/50011326 "Job list F6"
Job list F6
#Comments: List of the tasks
/50011327 "Remote DNC F9"
Remote DNC F9
#Comments: Remote => Wireless
/50011328 "STOP F10"
STOP F10
/50011280 "Display"
Display
/30067 "View Report"
View Report
*******************************
Dialog "Machine Settings" (IDD_MACHINE_SETTING)
*******************************
/50011301 "Machine number:"
Machine number:
#Comments: Within DNC -> Settings -> Machine Settings
/50011302 "Machine Name:"
Machine Name:
/50011303 "Type:"
Type:
/50011304 "&ID Char:"
&ID Char:
#Comments: ID Char => shortcut of Identification Character
/50011305 "Tx wait for Xon"
Tx wait for Xon
/50011306 "RxTimeout:"
RxTimeout:
/50011307 "Send comments"
Send comments
/50011308 "Rx use DC2/DC4"
Rx use DC2/DC4
/50011309 "Port Settings"
Port Settings
/30068 "DTR/DSR"
DTR/DSR
/30069 "RTS/CTS"
RTS/CTS
/30070 "XON/XOFF"
XON/XOFF
/50011310 "Hand Shake"
Hand Shake
#Comments: Agreement between the machine and the computer
/50011311 "&Port:"
&Port:
/50011312 "&Baud Rate:"
&Baud Rate:
#Comments: Transmission Speed
/50011313 "&Data Bits:"
&Data Bits:
#Comments: Bit => single basic unit of information
/50011314 "P&arity:"
P&arity:
#Comments: Equality
/50011315 "&Stop Bits:"
&Stop Bits:
#Comments:
/3003 "Apply"
Apply
/50011316 "&Upper case"
&Upper case
#Comments: Big letters
/50011317 "Tx suppress these characters:"
Tx suppress these characters:
/50011318 "Delay after line - sec \n(0=No delay,0.001= Line by Line or 0.01 -1.0
)"
Delay after line - sec \n(0=No delay,0.001= Line by Line or 0.01 -1.0 )
#Comments: Line => row of NC code
/30071 "for Tx"
for Tx
/30072 "for Rx"
for Rx
/30074 "EIA conversion"
EIA conversion
/50011319 "Port uses FIFO"
Port uses FIFO
/30802 "Aux Machine:"
Aux Machine:
/30941 "IP Address:"
IP Address:
/30942 "TCP Port Number:"
TCP Port Number:
/30943 "Ethernet Connection"
Ethernet Connection
*******************************
Dialog "Select machine" (IDD_MACHINE_SELCTION)
*******************************
/50011296 "Select machine"
Select machine
*******************************
Dialog "Job list" (IDD_BATCH)
*******************************
/50011290 "Job list"
Job list
#Comments: Within DNC -> File menu -> Create Job List or just by clicking in the
button "Job List" from the State Bar
/50011291 "&Add"
&Add
/50011292 "&Clear all"
&Clear all
/50011297 "&Remove"
&Remove
/50011293 "&Send"
&Send
/50011299 "&Close"
&Close
/30050 "JOB LIST"
JOB LIST
/50011298 "&Print"
&Print
/50011279 "Tape Mode"
Tape Mode
/50011278 "Send one by one"
Send one by one
/50011277 "Send all at once"
Send all at once
/8014 "Save As"
Save As
*******************************
Dialog "Parts Path" (IDD_PART_PATH_SETTING)
*******************************
/30051 "Parts Path"
Parts Path
#Comments: Path => Track to parts' location
/664 "Browse"
Browse
*******************************
Dialog "About cncKad2006" (IDD_ABOUTBOX)
*******************************
/4050 "About cncKad2006"
About cncKad2006
/30411 "OK"
OK
/4441 "File Name:"
File Name:
/3074 "Report Language:"
Report Language:
/3076 "Picture Size (percentage):"
Picture Size (percentage):
/4067 "Line Thickness"
Line Thickness
#Comments: Line => long thin mark
/15186 "Black/White"
Black/White
/30141 "Editor"
Editor
/400 "Scale:"
Scale:
*******************************
Dialog "Load/Unload" (IDD_DEF_PARAMS_LOAD_UNLOAD)
*******************************
/15065 "Load/Unload"
Load/Unload
*******************************
Dialog "Point" (IDD_POINT)
*******************************
/3080 "Point"
Point
/3084 "Relative"
Relative
/3091 "Polar"
Polar
/3085 "Select Ref Point"
Select Ref Point
#Comments: Ref => abbreviation of 'reference'
/3202 "Apply"
Apply
/3082 "X Pos :"
X Pos :
/3083 "Y Pos :"
Y Pos :
/3081 "Position"
Position
/8504 "Type"
Type
*******************************
Dialog "Information" (IDD_GENERAL_INFO)
*******************************
/6820 "Information"
Information
*******************************
Dialog "Global Cut" (IDD_DEF_PARAMS_LASER)
*******************************
/313 "Global Cut"
Global Cut
/15027 "Piercing"
Piercing
/15030 "Cutting"
Cutting
/4487 "Active"
Active
/3436 "Program Functions"
Program Functions
/3622 "Sensor"
Sensor
/3601 "Cutting Gap"
Cutting Gap
/4492 "Travel Gap"
Travel Gap
/4493 "Travel Speed"
Travel Speed
/15031 "To next Cut"
To next Cut
/3602 "End Gap"
End Gap
/4490 "Z Option Parameters"
Z Option Parameters
#Comments: Parameters of the movements of the turret along axis Z
/4370 "Max Angle"
Max Angle
#Comments: max => abbreviation of 'maximal'
/4482 "Loops"
Loops
/4489 "Under Radius"
Under Radius
/4483 "Slow"
Slow
/4486 "Cooling Time:"
Cooling Time:
/4485 "Cooling"
Cooling
#Comments: Making the sheet cool, after the laser cut
/4480 "Corner Parameters"
Corner Parameters
/4568 "Holes Inside Part"
Holes Inside Part
/4572 "Between Parts"
Between Parts
/30570 "Rounding"
Rounding
/4484 "Distance Before Corner:"
Distance Before Corner:
/4488 "Distance After Corner:"
Distance After Corner:
*******************************
Dialog "AutoNest" (IDD_DIALOG_PARTS_WERE_UPDATED)
*******************************
/510 "AutoNest"
AutoNest
/511 "The following parts have been updated:"
The following parts have been updated:
*******************************
Dialog "Update Parts" (IDD_DIALOG_OUT_OF_DATE_PARTS)
*******************************
/501 "Yes, please!"
Yes, please!
/504 "No, thanks"
No, thanks
/505 "Ask me again next time"
Ask me again next time
/506 "From now on update parts automatically"
From now on update parts automatically
/507 "Don't show this message again"
Don't show this message again
/508 "The following parts are out of date:"
The following parts are out of date:
/509 "Would you like AutoNest to update the parts?"
Would you like AutoNest to update the parts?
*******************************
Dialog "Machine Settings" (IDD_MACHINES_SET)
*******************************
/8027 "Machine Settings"
Machine Settings
/3051 "Machine Path"
Machine Path
#Comments: Path => Track to machine file's location
/3053 "Browse..."
Browse...
/3052 "Parts Path"
Parts Path
#Comments: Path => Track to parts' location
/3054 "Machines Selection"
Machines Selection
/3055 "Manufacturers:"
Manufacturers:
#Comments: Producers
/3056 "Models Description:"
Models Description:
/3057 "Selected Machines:"
Selected Machines:
/3060 "Machine Parameters"
Machine Parameters
/3061 "Current Machine:"
Current Machine:
#Comments: Presently used machine
/3067 "Edit Machine Files"
Edit Machine Files
/3062 "Turret:"
Turret:
/3063 "ID Char:"
ID Char:
#Comments: ID Char => Identification Character
/3064 "Directives:"
Directives:
#Comments: Instructions, commands
/3065 "Tool Setup:"
Tool Setup:
/3069 "Line Settings"
Line Settings
#Comments: Line => row of nc code
/3070 "Line Numbers"
Line Numbers
#Comments: Line => row of nc code
/3071 "First Line:"
First Line:
#Comments: Line => row of nc code
/430 "Step"
Step
/3073 "Maximum Line:"
Maximum Line:
#Comments: Maximal amount of rows in the NC code
/30360 "Delete Old Sections"
Delete Old Sections
/30571 "Laser:"
Laser:
/30572 "Geometry:"
Geometry:
/30723 "Read Machines Settings from Backup"
Read Machines Settings from Backup
/30724 "Backup Machines Settings"
Backup Machines Settings
/30725 "Backup Machines Directory"
Backup Machines Directory
*******************************
Dialog "Turret Setups" (IDD_DLG_TURRET_SETUPS)
*******************************
/4437 "Close"
Close
/3630 "Machine"
Machine
/4460 "Add/Create New"
Add/Create New
/4464 "Add/Edit ToolFunc"
Add/Edit ToolFunc
#Comments: ToolFunc => abbreviation for 'tool functions'
/15073 "Select Setup File:"
Select Setup File:
/4465 "Select Multi-Tools in Turret"
Select Multi-Tools in Turret
/3771 "Select the Machine:"
Select the Machine:
/30573 "Turret Display"
Turret Display
/30223 "Save Setup As"
Save Setup As
/30224 "Add/Create a New Turret"
Add/Create a New Turret
/30412 "Edit Turret"
Edit Turret
/30413 "Remove Turret"
Remove Turret
*******************************
Dialog "Select Sheet" (IDD_SELECT_SHEET)
*******************************
/3392 "Select Sheet"
Select Sheet
*******************************
Dialog "Cutting Technology Material List" (IDD_LT_MATERIAL_LIST)
*******************************
/30509 "Cutting Technology Material List"
Cutting Technology Material List
/147 "Materials"
Materials
/30832 "Add Material"
Add Material
/30589 "Delete Material"
Delete Material
/195 "All Colors"
All Colors
/196 "All Styles"
All Styles
*******************************
Dialog "Print Line Thickness" (IDD_PRINT_LINETHICKNESS)
*******************************
/4600 "Print Line Thickness"
Print Line Thickness
/4601 "Save As Defaults"
Save As Defaults
*******************************
Dialog "Reposition" (IDD_DEF_PARAMS_REPOSITION)
*******************************
/4575 "Reposition"
Reposition
/3167 "Quantity"
Quantity
#Comments: Amount
/4577 "Minimum Reposition"
Minimum Reposition
#Comments: As few repositons as possible
/4578 "Minimum Part Breaks"
Minimum Part Breaks
#Comments: As few stops as possible, while processing the part
/4579 "User Defined:"
User Defined:
#Comments: Defined by the user
/4580 "Max/Min Processing"
Max/Min Processing
/4582 "Maximum at Last "Grip""
Maximum at Last "Grip"
#Comments: Maximum processing done in the last reposition
/4581 "Maximum at 1st "Grip""
Maximum at 1st "Grip"
#Comments: Maximum processing done in the first reposition
/4583 "Reposition is:"
Reposition is:
/4585 "Manual"
Manual
/15120 "Tool Reverse Order for Reposition/Transformation"
Tool Reverse Order for Reposition/Transformation
#Comments: Order => sequence
/15159 "Use Clamp Move for Clamp Avoidance"
Use Clamp Move for Clamp Avoidance
/731 "Reposition Safety"
Reposition Safety
/732 "Reposition Back"
Reposition Back
#Comments: After processing, brings the sheet back to its initial position
/733 "Start Process From Right Side"
Start Process From Right Side
*******************************
Dialog "Material" (IDD_PS_MATERIAL)
*******************************
/3670 "Material"
Material
/3673 "Normal"
Normal
/3674 "Formed"
Formed
#Comments: Shaped
/3675 "Irregular"
Irregular
/3672 "Sheet Type"
Sheet Type
/3676 "Sheet Thickness"
Sheet Thickness
/3671 "Material List"
Material List
/3669 "Default Material"
Default Material
/3677 "Sheet Database"
Sheet Database
/6533 "Thickness"
Thickness
/3679 "Standard Sizes"
Standard Sizes
/3678 "Edit Material"
Edit Material
/30210 "Extended Table"
Extended Table
#Comments: Table => chart
/30211 "Material + Thickness ID"
Material + Thickness ID
#Comments: Identification for material type and thickness value
/30833 "Convert Materials"
Convert Materials
/30706 "Edit Cutting Technology Materials"
Edit Cutting Technology Materials
*******************************
Dialog "Settings" (IDD_TOOLBAR_SETTINGS_PP)
*******************************
/206 "Toolbar Settings"
Toolbar Settings
/207 "Restore All Defaults"
Restore All Defaults
/30002 "Load From Backup"
Load From Backup
#Comments: Backup -> reserve, copy of information
/30003 "Save Backup"
Save Backup
*******************************
Dialog "Array" (IDD_DIALOG_COMMON_ARRAY)
*******************************
/3140 "Array"
Array
/208 "Qnt Overflow"
Qnt Overflow
#Comments: Qnt => shortcut of "quantity"
/209 "Grid x First"
Grid x First
/3159 "Grouped"
Grouped
/3563 "Top"
Top
/218 "Bottom"
Bottom
/3145 "Number"
Number
#Comments: Amount
/3146 "On X:"
On X:
/3147 "On Y:"
On Y:
/3221 "Dist. Between Parts"
Dist. Between Parts
#Comments: Distance between parts
/226 "X Min Dist"
X Min Dist
#Comments: Min Dist => minimum distance
/227 "Y Min Dist"
Y Min Dist
#Comments: Min Dist => minimum distance
/3152 "dY:"
dY:
/3148 "X Dir"
X Dir
#Comments: Dir => direction
/3149 "Y Dir"
Y Dir
#Comments: Dir => direction
/3150 "Grouped Arrays Common Cuts"
Grouped Arrays Common Cuts
#Comments: Common cut inside the grouped array itself
/686 "Vertical"
Vertical
/685 "Horizontal"
Horizontal
/228 "Directions"
Directions
/3163 "Convert Single Punches to Grids"
Convert Single Punches to Grids
/30726 "Set MultiHeads"
Set MultiHeads
/30727 "Use MultiHeads"
Use MultiHeads
/30728 "Dist between heads"
Dist between heads
#Comments: Distance between heads
*******************************
Dialog "Clamps" (IDD_DEF_PARAMS_CLAMPS)
*******************************
/3345 "Clamps"
Clamps
/3347 "1st Clamp "
1st Clamp
/3348 "2nd Clamp "
2nd Clamp
/3349 "3rd Clamp"
3rd Clamp
/50003953 "4th Clamp"
4th Clamp
/3346 "Clamp Coordinates"
Clamp Coordinates
/3344 "Max Used Clamps"
Max Used Clamps
#Comments: Max. => maximal
/15119 "Restore Defaults"
Restore Defaults
*******************************
Dialog "User Data" (IDD_USER_DATA_PP)
*******************************
/3690 "User Data"
User Data
/3921 "Drawing Number"
Drawing Number
#Comments: Number of the project
/3922 "Project/Customer"
Project/Customer
/3691 "Programmer"
Programmer
/3924 "Description"
Description
/3925 "Order Number"
Order Number
#Comments: Number of the request
/3926 "Revision (Version) "
Revision (Version)
/3927 "Note"
Note
/3287 "Copy"
Copy
/3920 "Paste"
Paste
/30282 "Edit Titles"
Edit Titles
*******************************
Dialog "Pre Post settings" (IDD_PREPOST_FIRST_PP)
*******************************
/3770 "Pre Post Settings"
Pre Post Settings
/30729 "Mach Name"
Mach Name
#Comments: Mach => machine
*******************************
Dialog "Machine" (IDD_PS_MACHINE)
*******************************
/3638 "dY:"
dY:
/3634 "From Origin"
From Origin
#Comments: Origin => Beginning of coordinate system; from starting point
/3635 "From End"
From End
/3633 "Offsets"
Offsets
/3657 "dY:"
dY:
/3655 "Distance Between Parts"
Distance Between Parts
/3658 "Start Parts Placement"
Start Parts Placement
#Comments: Begin to place the parts
/3659 "From Clamps"
From Clamps
/3660 "Opposite Clamps"
Opposite Clamps
/30251 "Create New Library..."
Create New Library...
/30362 "Private Tool Library"
Private Tool Library
/3648 "Program Functions..."
Program Functions...
*******************************
Dialog "Post-Processor Options" (IDD_POST_PROC_OPTIONS_PP)
*******************************
/3760 "Post-Processor Options"
Post-Processor Options
/3761 "Use Macros (Sub-Routines)"
Use Macros (Sub-Routines)
/15010 "Automatic Testing of Common Cuts"
Automatic Testing of Common Cuts
/15011 "Use Controller Compensation"
Use Controller Compensation
/238 "Check For Not Processed Contours"
Check For Not Processed Contours
/3759 "Update LASTSET"
Update LASTSET
/30363 "Do Not Detect Groups of Single Punches"
Do Not Detect Groups of Single Punches
/30254 "Automatically Detect Lines of Single Punches"
Automatically Detect Lines of Single Punches
/30255 "Automatically Detect Grids"
Automatically Detect Grids
/15039 "Number of Sheets"
Number of Sheets
#Comments: Number => amount
/3762 "Program Number:"
Program Number:
/3822 "NC File Name"
NC File Name
/239 "Sheets Quantity"
Sheets Quantity
/30256 "Automatic Detection"
Automatic Detection
/30489 "Warn If Processing In Y Smaller Than Dead Zone Y"
Warn If Processing In Y Smaller Than Dead Zone Y
/30525 "Prompt For Overwrite Existing NC File"
Prompt For Overwrite Existing NC File
/30513 "Run Simulation After Post Processor"
Run Simulation After Post Processor
*******************************
Dialog "Selection Filter" (IDD_SELECTION_FILTER)
*******************************
/245 "Selection Filter"
Selection Filter
/15211 "Entity Type"
Entity Type
/15207 "Line"
Line
#Comments: Line => long thin mark
/3200 "Circle"
Circle
/3545 "Color"
Color
/15208 "Line Type"
Line Type
#Comments: Line => long thin mark
/15209 "Select All"
Select All
/15210 "Clear All"
Clear All
*******************************
Dialog "Auto Cut Sheet" (IDD_DIALOG_AUTO_CUT_SHEET)
*******************************
/247 "AutoCut Sheet"
AutoCut Sheet
/248 "Use AutoCut Sheet"
Use AutoCut Sheet
#Comments: Use Automatic option to cut the sheet
/249 "Min. Remnant Dist on X:"
Min. Remnant Dist on X:
#Comments: Min => minimal; dist => shortcut of "distance"; remnant => unused por
tion
/250 "Min. Remnant Dist on Y:"
Min. Remnant Dist on Y:
#Comments: Min. => minimal; dist => shortcut of "distance"; remnant => unused po
rtion
/251 "Distance From Parts:"
Distance From Parts:
/252 "When There Is More Than One Cut Use:"
When There Is More Than One Cut Use:
*******************************
Dialog "Working units" (IDD_DIALOG_WORKING_UNITS)
*******************************
/253 "Working Units"
Working Units
/254 "mm"
mm
/255 "inches"
inches
/257 "The working units are:"
The working units are:
*******************************
Dialog "Cutting Parameters" (IDD_CUTTING_PARAMS)
*******************************
/3600 "Cutting Parameters"
Cutting Parameters
/3358 "Feed"
Feed
/3359 "Set"
Set
/3352 "Low"
Low
/3353 "Medium"
Medium
/3354 "High"
High
/3355 "Ultra"
Ultra
/3351 "Cutting Speed"
Cutting Speed
/15028 "Time"
Time
/3357 "Dynamic Piercing"
Dynamic Piercing
/15076 "Vaporization"
Vaporization
#Comments: Evaporating
/710 "Point Marking Style"
Point Marking Style
#Comments: Pattern that indicates a point
/711 "Use PrePiercing"
Use PrePiercing
/30257 "Use Standard Shapes"
Use Standard Shapes
/30819 "Use Vaporize For Engrave"
Use Vaporize For Engrave
*******************************
Dialog "Set Program Origin" (IDD_MACHINE_ORIGIN)
*******************************
/3529 "Top Left"
Top Left
/3527 "Bottom Left"
Bottom Left
/3528 "Bottom Right"
Bottom Right
/3530 "Top Right"
Top Right
/607 "OK"
OK
/608 "Cancel"
Cancel
/722 "Click on Part"
Click on Part
/15150 "Enable"
Enable
*******************************
Dialog "Problem Description" (IDD_SEND_PROBLEM_REPORT2)
*******************************
/31163 "Problem Description"
Problem Description
/31164 "Summary:"
Summary:
/31165 "Product:"
Product:
/31166 "OS Version:"
OS Version:
/31167 "Reproduced:"
Reproduced:
/31168 "Please write here as much information as you can about the problem"
Please write here as much information as you can about the problem
/31169 "Please discribe the steps to reproduce the problem"
Please discribe the steps to reproduce the problem
*******************************
Dialog "Personal Information" (IDD_SEND_PROBLEM_REPORT3)
*******************************
/31170 "Personal Information"
Personal Information
/31171 "First:"
First:
/31172 "Company:"
Company:
/31173 "Last:"
Last:
/31174 "E-Mail:"
E-Mail:
/31175 "Phone:"
Phone:
/31176 "Mobile:"
Mobile:
/31177 "Address:"
Address:
/31178 "Always Use This Info"
Always Use This Info
*******************************
Dialog "Problem Report" (IDD_SEND_PROBLEM_REPORT1)
*******************************
/30142 "Problem Report"
Problem Report
/31179 "Attach..."
Attach...
/31180 "Files to be sent to cncKad support team"
Files to be sent to cncKad support team
/31181 "Detach"
Detach
/30078 "View Plug Content"
View Plug Content
*******************************
Dialog "Ask Sender" (IDD_ASK_SENDER_ID_DLG)
*******************************
/30414 "Ask Sender"
Ask Sender
*******************************
Dialog "Select Print Mode" (IDD_DIALOG_DOC_PRINT_MODE)
*******************************
/30021 "Select Print Mode"
Select Print Mode
/30022 "Doc Report file"
Doc Report file
*******************************
Dialog "Problem Report" (IDD_PROBLEM_ROPORT_SEND_CONFIRM)
*******************************
/30143 "Send Report by E-Mail Now"
Send Report by E-Mail Now
/30144 "Open Containing Folder"
Open Containing Folder
/30730 "Save 'report.mpr' In The Following Location:"
Save 'report.mpr' In The Following Location:
*******************************
Dialog "Extended Sheet Sizes List" (IDD_DIALOG_EX_SHEETSIZES)
*******************************
/30212 "Extended Sheet Sizes List"
Extended Sheet Sizes List
*******************************
Dialog "CAD Link Options" (IDD_CAD_LINK_OPTIONS)
*******************************
/30213 "CAD Link Options"
CAD Link Options
/30214 "Bound"
Bound
#Comments:Border, boundary, limiting (here: line)
/30215 "Center"
Center
/30216 "Both"
Both
/30217 "Bend Lines"
Bend Lines
#Comments: Lines that indicate where the sheet should be bent
*******************************
Dialog "Live Update" (IDD_DIALOG_UPDATES)
*******************************
/30218 "Live Update"
Live Update
/30219 "Check for Updates"
Check for Updates
/30220 "Downloads Directory:"
Downloads Directory:
#Comments: Directory on which downloaded updates are being stored
*******************************
Dialog "Password" (IDD_DIALOG_BETA_SITE_PSW)
*******************************
/30248 "Password"
Password
/30249 "Please Enter Beta Site Password:"
Please Enter Beta Site Password:
*******************************
Dialog "Create tool library" (IDD_DIALOG_TOOL_LIB_NAME)
*******************************
/30258 "Create Tool Library"
Create Tool Library
/30259 "Please Enter a Name for The Tool Library:"
Please Enter a Name for The Tool Library:
*******************************
Dialog "Edit Titles" (IDD_DIALOG_EDIT_TITLES)
*******************************
/30266 "Title 1:"
Title 1:
/30267 "Title 2:"
Title 2:
/30268 "Title 3:"
Title 3:
/30269 "Title 4:"
Title 4:
/30270 "Title 5:"
Title 5:
/30271 "Title 6:"
Title 6:
/30272 "Title 7:"
Title 7:
/30273 "Insert New Titles:"
Insert New Titles:
/30274 "Default:"
Default:
/30275 "DEFAULT:"
DEFAULT:
/30375 "Restore Default Titles"
Restore Default Titles
/50011285 "Material"
Material
/30574 "Gas"
Gas
/30575 "Head"
Head
/30576 "Lens"
Lens
/30731 "New / Copy"
New / Copy
/30580 "Add Row"
Add Row
/30581 "Delete Rows"
Delete Rows
/30584 "Distance Between Parts"
Distance Between Parts
/30585 "Danger Zone - Parts From"
Danger Zone - Parts From
/30586 "Danger Zone - Parts To"
Danger Zone - Parts To
/30587 "Danger Zone - Holes From"
Danger Zone - Holes From
/30588 "Danger Zone - Holes To"
Danger Zone - Holes To
/30166 "Delete Thickness"
Delete Thickness
/30590 "Delete Gas"
Delete Gas
/30591 "Delete Head"
Delete Head
/30592 "Delete Lens"
Delete Lens
/30689 "Current Material Content"
Current Material Content
/30534 "One or more placements in subnest %d don't have DFT files.\nThe operatio
n for this subnest could not be completed."
One or more placements in subnest %d don't have DFT files.\nThe operation for th
is subnest could not be completed.
/30582 "No parameters are defined"
No parameters are defined
/30742 "Use Diameter For Contour Sizes"
Use Diameter For Contour Sizes
/30805 "Use Area For Contour Sizes"
Use Area For Contour Sizes
/30898 "Edit Cutting\nTechnology Material"
Edit Cutting\nTechnology Material
/30899 "Sheet Parameters"
Sheet Parameters
/30900 "Switch To Current"
Switch To Current
*******************************
Dialog "Edit" (IDD_EDIT_LASER_PARAMETRS)
*******************************
/30593 "Default Values:"
Default Values:
/30594 "Selected Values:"
Selected Values:
/30595 "User Defined Value:"
User Defined Value:
/3318 "Delete"
Delete
*******************************
Dialog "Copy" (IDD_COPY_LASER_PARAMETRS)
*******************************
/30707 "Also Copy Geometry and General Tables"
Also Copy Geometry and General Tables
/30733 "Select existing thickness to copy to, or type a new thickness to create
it"
Select existing thickness to copy to, or type a new thickness to create it
/30604 "Dist Between Parts:"
Dist Between Parts:
#Comments: Distance between parts
*******************************
Dialog "Part Unload Deposit" (IDD_DIALOG_PART_PROP)
*******************************
/30734 "Part Unload Deposit"
Part Unload Deposit
/3312 "X:"
X:
/3313 "Y:"
Y:
/30608 "Move To:"
Move To:
/30609 "Deposit: same position as on sheet"
Deposit: same position as on sheet
*******************************
Dialog "Reduced Problem Report" (IDD_SEND_PROBLEM_REPORT2_5)
*******************************
/30735 "Reduced Problem Report"
Reduced Problem Report
/30834 "(If checked, minimum size of 'problem report' file will be created)"
(If checked, minimum size of 'problem report' file will be created)
/30980 "Current Machine Only"
Current Machine Only
/30981 "All Machines"
All Machines
/30736 "Head1"
Head1
/30737 "Head2"
Head2
/30738 "Head3"
Head3
/30739 "Distance Between Heads:"
Distance Between Heads:
/30740 "Head4"
Head4
/30821 "Head5"
Head5
/30822 "Head6"
Head6
*******************************
Dialog "Multi Step Milling" (IDD_MULTI_STEP_MILLNG_PP)
*******************************
/30741 "Multi Step Milling"
Multi Step Milling
/30823 "Passes:"
Passes:
/30007 "Please wait until the operation will be completed"
Please wait until the operation will be completed
*******************************
Dialog "Materials Conversion" (IDD_MATERIAL_CONVERSION_DLG)
*******************************
/30835 "Materials Conversion"
Materials Conversion
/30836 "Use New Materials List"
Use New Materials List
/30837 "To enable conversion table check 'Use New Material List' checkbox"
To enable conversion table check 'Use New Material List' checkbox
/30838 "Convert old cutting table for selected materials"
Convert old cutting table for selected materials
/30901 "Set New Materials = Old Materials"
Set New Materials = Old Materials
/30839 "Take me to the Materials conversion wizard"
Take me to the Materials conversion wizard
/30840 "The new materials list is currently not used. It is recommended that you
start use it."
The new materials list is currently not used. It is recommended that you start u
se it.
*******************************
Dialog "Add Material" (IDD_DIALOG_ADD_MATERIAL)
*******************************
/30841 "Material Name"
Material Name
/30842 "Material Type"
Material Type
*******************************
Dialog "Material Lists" (IDD_SELECT_MAT_LIST_DLG)
*******************************
/30902 "Material Lists"
Material Lists
/30903 "Select Materials List From Following Lists "
Select Materials List From Following Lists
*******************************
Dialog "Material List" (IDD_MATERIAL_LIST)
*******************************
/4700 "Material List"
Material List
/3006 "Print"
Print
*******************************
Dialog "Machines Folder User Rights" (IDD_DIALOG_USER_RIGHTS)
*******************************
/30944 "Machines Folder User Rights"
Machines Folder User Rights
/30945 "Share / Stand Alone"
Share / Stand Alone
/30946 "Local Machines Folder:"
Local Machines Folder:
/30947 "Each Time cncKad Starts"
Each Time cncKad Starts
/30948 "Only When I Press 'Update' Button "
Only When I Press 'Update' Button
/30949 "Update Local Machines Folder Mode"
Update Local Machines Folder Mode
/30950 "Update Your Local Machines Folder from Machines Master Now"
Update Your Local Machines Folder from Machines Master Now
/30951 "Create/Update Machines Master Folder"
Create/Update Machines Master Folder
/30952 "Master"
Master
/30953 "User Only"
User Only
/30954 "Machines Folder User Rights Mode"
Machines Folder User Rights Mode
/30955 "Master Machines Folder"
Master Machines Folder
/30956 "\nThis mode sets the local machine folder as an image of the master mach
ine folder"
\nThis mode sets the local machine folder as an image of the master machine fold
er
/30957 "This mode does not use a master machine folder"
This mode does not use a master machine folder
/30958 "\nThis mode sets the local machine folder to be the source for the maste
r machines folder"
\nThis mode sets the local machine folder to be the source for the master machin
es folder
*******************************
Dialog "Estimation Settings" (IDD_DIALOG_COST_SETTINGS)
*******************************
/31204 "Estimation Settings"
Estimation Settings
/30960 "Preparations"
Preparations
/30961 "Engineering Price/Hr"
Engineering Price/Hr
/30963 "Programming Price/Hr"
Programming Price/Hr
/30965 "Machine Name"
Machine Name
/30967 "Setup Price/Hr"
Setup Price/Hr
/30970 "Machine Price/Hr"
Machine Price/Hr
/30972 "Grinding Price/Hr"
Grinding Price/Hr
/31015 "Bending Price/Hr"
Bending Price/Hr
/31140 "Tapping Price/Hr"
Tapping Price/Hr
/31141 "Drilling Price/Hr "
Drilling Price/Hr
/31142 "Default Setup Time"
Default Setup Time
/31143 "Other Machines"
Other Machines
/30977 "Bending"
Bending
*******************************
Dialog "Estimation Calculations" (IDD_DIALOG_COST_PART)
*******************************
/31205 "Estimation Calculations"
Estimation Calculations
/31144 "Grinding"
Grinding
/30975 "Drilling"
Drilling
/30976 "Tapping"
Tapping
/31145 "Bend Setup"
Bend Setup
/31114 "Recalculate"
Recalculate
/30974 "Read From Part"
Read From Part
/31115 "Standard Part"
Standard Part
/30989 "Engineering Time"
Engineering Time
/30990 "Programming Time"
Programming Time
/31146 "Machine Data"
Machine Data
/31001 "Cutting Length"
Cutting Length
/31002 "Engraving Length"
Engraving Length
/31003 "Vaporization Length"
Vaporization Length
/31004 "Travel Length"
Travel Length
/31005 "Manufacture"
Manufacture
/31006 "Cutting Time"
Cutting Time
/31007 "Engraving Time"
Engraving Time
/31008 "Vaporization Time"
Vaporization Time
/31010 "Travel Time"
Travel Time
/31011 "Total Cutting Machine Processing Time"
Total Cutting Machine Processing Time
/31013 "Total Processing Time"
Total Processing Time
/31014 "Material Price"
Material Price
/31016 "Price"
Price
/31017 "Results"
Results
/50011289 "Quantity"
Quantity
/31018 "Cost Per Part"
Cost Per Part
/31019 "Without material"
Without material
/31020 "Pierce Quantity"
Pierce Quantity
/30994 "Part Properties"
Part Properties
/30995 "Bounding Rectangle"
Bounding Rectangle
/30996 "Efficiency (%)"
Efficiency (%)
/30997 "Area Gross"
Area Gross
/30999 "Weight Gross"
Weight Gross
/31000 "Weight Net"
Weight Net
/30998 "Area Net"
Area Net
/31009 "Piercing Time"
Piercing Time
/31245 "Punching Speed"
Punching Speed
/31246 "Punches"
Punches
/31247 "Nibbling Speed"
Nibbling Speed
/31248 "Punch Data"
Punch Data
/31249 "Cutting Data"
Cutting Data
/31149 "Machine Setup Time"
Machine Setup Time
/31148 "Time/Unit"
Time/Unit
/31147 "Price/Hr"
Price/Hr
/31250 "Punching Time"
Punching Time
*******************************
Dialog "Bend Lines" (IDD_BEND_LINE_DLG)
*******************************
/31021 "Bending Program"
Bending Program
/31022 "Bend Line Properties"
Bend Line Properties
#Comments: Line => long thin mark denoting bending
/31023 "Positive Angle"
Positive Angle
/31024 "Negative Angle"
Negative Angle
/31025 "Export Bend Line Angle"
Export Bend Line Angle
#Comments: Line => long thin mark denoting bending
/31026 "Export Bend Line Radius"
Export Bend Line Radius
/31116 "Export Bend Line K Factor"
Export Bend Line K Factor
*******************************
Dialog "Rectangle" (IDD_COST_RECT)
*******************************
/3517 "Rectangle"
Rectangle
/266 "Point List Grid"
Point List Grid
/15113 "Height:"
Height:
/30982 "Reset"
Reset
*******************************
Dialog "Round" (IDD_COST_ROUND)
*******************************
/31117 "Round"
Round
/8510 "Diameter:"
Diameter:
*******************************
Dialog "Set Currency" (IDD_COST_CURRENCY)
*******************************
/31150 "Set Currency"
Set Currency
/31151 "Select currency:"
Select currency:
*******************************
Dialog "Report Settings Dialog" (IDD_REPORT_SETTINGS)
*******************************
/30983 "Report Settings Dialog"
Report Settings Dialog
/30985 "File Format"
File Format
/30986 "Part Report Template"
Part Report Template
/30987 "NC Report Template"
NC Report Template
*******************************
Dialog "About cncKad2006" (IDD_OEM_ONLY_ABOUTBOX)
*******************************
*******************************
Dialog "Information" (IDD_GENERAL_INFO_DIALOG)
*******************************
*******************************
Dialog "Variable" (IDD_ONE_VARIABLE_DIALOG)
*******************************
/15148 "Variable"
Variable
/263 "Name:"
Name:
/264 "Picture Size"
Picture Size
*******************************
Dialog "Point List" (IDD_POINT_LIST)
*******************************
/265 "Point List"
Point List
#Comments: List of points
*******************************
Dialog "Cutting Optimization" (IDD_LASER_OPTIM_PP)
*******************************
/15223 "Cutting Optimization"
Cutting Optimization
/4566 "Stripe Width:"
Stripe Width:
/4554 "Starting Corner"
Starting Corner
#Comments: Beginning point of the optimization
/4528 "Optimization Path:"
Optimization Path:
#Comments: Path => The way in which the CAM will be optimized
/4567 "Cooling Distance:"
Cooling Distance:
/15222 "Enable Automatic Order"
Enable Automatic Order
#Comments: Order => arranging
*******************************
Dialog "Program Functions" (IDD_FUNCTIONS_PROGRAM)
*******************************
/3435 "Program Functions"
Program Functions
/3437 "Pre-Program"
Pre-Program
#Comments: "Pre" -> before
/3438 "Pre-Program"
Pre-Program
/3439 "Post-Program"
Post-Program
#Comments: "Post" -> after
/3440 "Post-Program"
Post-Program
*******************************
Dialog "Shape List" (IDD_SHAPE_LIST)
*******************************
/3239 "Delete Shape"
Delete Shape
*******************************
Dialog "User Data" (IDD_PS_USERDATA)
*******************************
*******************************
Dialog "Display" (IDD_PS_DISPLAY)
*******************************
/3570 "Display"
Display
/3587 "Show Arrow"
Show Arrow
/3215 "Horizontal"
Horizontal
/3575 "Diagonal"
Diagonal
/3576 "Angle"
Angle
/3577 "Radius"
Radius
/3578 "Diameter"
Diameter
/3579 "Angle to X"
Angle to X
/3580 "Angle to Y"
Angle to Y
/3572 "Dimension Type"
Dimension Type
/3582 "Single"
Single
/3583 "Serial"
Serial
/3584 "From Base Point"
From Base Point
/3581 "Dimension Mode"
Dimension Mode
/3571 "Dimensions"
Dimensions
/3589 "Top-Left"
Top-Left
/3590 "Top-Right"
Top-Right
/3591 "Bottom-Left"
Bottom-Left
/3592 "Bottom-Right"
Bottom-Right
/3588 "System Origin"
System Origin
#Comments: Origin => Beginning of coordinate system
/3585 "Text Size"
Text Size
/3586 "Arrow Size"
Arrow Size
/3593 "Right Align Text"
Right Align Text
/3594 "Black Background"
Black Background
/30145 "Show up to "
Show up to
#Comments: Maximum number of decimal digits that could be shown
/30146 "Show exactly"
Show exactly
/30147 "Decimal Digits"
Decimal Digits
#Comments: Digits pertaining to tenths or the number ten
/30286 "(units)"
(units)
/30225 "Use Dash for Selected Entities"
Use Dash for Selected Entities
/30510 "Show All Dies For Tools"
Show All Dies For Tools
/30858 "Rulers"
Rulers
/30859 "Spacing:"
Spacing:
*******************************
Dialog "Working Defaults" (IDD_PS_WORKDEF)
*******************************
/4200 "Working Defaults"
Working Defaults
/4214 "Two Letter Tool Definition"
Two Letter Tool Definition
#Comments: Tool is defined with two letters
/4212 "Enable Update of LASTSET"
Enable Update of LASTSET
/4215 "Window With Drag"
Window With Drag
/4216 "Report With Windows Font"
Report With Windows Font
#Comments: Report file containing Windows fonts
/4217 "Editor Reloads Externally Modified File"
Editor Reloads Externally Modified File
/30304 "Change Mouse Wheel Direction"
Change Mouse Wheel Direction
/30325 "Use XP Style"
Use XP Style
/30515 "Adjust Punch Parameters to Current Tool Type"
Adjust Punch Parameters to Current Tool Type
/30764 "Notify After Parts Update"
Notify After Parts Update
/4206 "Decimal Digits "
Decimal Digits
#Comments: Digits pertaining to tenths or the number ten
/4207 "Tolerance"
Tolerance
#Comments: Acceptance of the error
/4213 "Angle Tolerance"
Angle Tolerance
#Comments: Tolerance => Acceptance of the error
/4208 "Bulge"
Bulge
#Comments: Protrusion, projection
/30288 "(for inch)"
(for inch)
/31046 "Never Update NST Files"
Never Update NST Files
/30765 "Ask Before Punch Shape"
Ask Before Punch Shape
/30766 "Delete Stored Info"
Delete Stored Info"
/4210 "Send To A:\\"
Send To A:\\
#Comments: Send the file to diskette (Disc A:\)
/4211 "Send To Other Location:"
Send To Other Location:
/4209 "Send To Disk"
Send To Disk
#Comments: Send the file to specified disc
/31152 "Browse Location..."
Browse Location...
*******************************
Dialog "Cutting Parameters" (IDD_PS_LASER)
*******************************
/4374 "Point"
Point
/4376 "Length"
Length
/697 "Entry"
Entry
/4385 "Length"
Length
/4383 "Exit"
Exit
/4367 "Start"
Start
/4368 "End"
End
/4366 "Offsets"
Offsets
/4380 "Method"
Method
/4381 "User Defined Hole Diameter"
User Defined Hole Diameter
/4382 "Position"
Position
/4379 "Piercing"
Piercing
/4406 "Beam Diameter"
Beam Diameter
/4386 "Contour Overlap"
Contour Overlap
/4481 "Corner Cutting Style"
Corner Cutting Style
/3604 "Piercing Gap"
Piercing Gap
/30352 "Travel Gap"
Travel Gap
/15032 "Rapid"
Rapid
/30353 "Travel Speed"
Travel Speed
#Comments: Quickness,velocity of the movement
/30860 "Convert Plasma Table to cncKad"
Convert Plasma Table to cncKad
*******************************
Dialog "Auto" (IDD_PS_AUTO)
*******************************
/4491 "Use Global"
Use Global
/3559 "Use Rectangular Border"
Use Rectangular Border
/3566 "Use Part Border"
Use Part Border
/3561 "Valid"
Valid
#Comments: Valid => active,
/3562 "Min Part Size"
Min Part Size
#Comments: Min => minimal
/15100 "Right"
Right
/4037 "Distance Bet. Parts:"
Distance Bet. Parts:
#Comments: bet. => abbreviation of the word "between"
/4038 "Manual Value:"
Manual Value:
#Comments: Manually chosen value
/4039 "Default Value:"
Default Value:
/3552 "Buffer"
Buffer
#Comments: Area around the part
/3560 "Auto Processing"
Auto Processing
/3553 "Buffer Size"
Buffer Size
/3554 "Direction"
Direction
/3507 "Mirror"
Mirror
/30000 "Common Cuts For Group Arrays"
Common Cuts For Group Arrays
/30521 "Hole Buffer Size"
Hole Buffer Size
*******************************
Dialog "Circle" (IDD_CIRCLE)
*******************************
/3201 "Diameter:"
Diameter:
/3203 "Exit"
Exit
*******************************
Dialog "Arc" (IDD_ARC)
*******************************
/3126 "Radius:"
Radius:
/3127 "Start Angle:"
Start Angle:
/3128 "End Angle:"
End Angle:
/3129 "Included Angle:"
Included Angle:
/3131 "Exit"
Exit
*******************************
Dialog "Chamfer" (IDD_CHAMFER)
*******************************
/3180 "Chamfer"
Chamfer
/3182 "1st:"
1st:
/3183 "2nd:"
2nd:
/3181 "Distances"
Distances
*******************************
Dialog "Rotate Mode" (IDD_ROTATE)
*******************************
/3804 "Rotation Angle:"
Rotation Angle:
*******************************
Dialog "Mirror" (IDD_MIRROR)
*******************************
/3502 "Vertical Axis"
Vertical Axis
/3503 "Horizontal Axis"
Horizontal Axis
/3504 "Both Axes"
Both Axes
/3509 "Part Center"
Part Center
/3501 "Mirror Axis"
Mirror Axis
#Comments: Axis of the Mirror (reflecting)
*******************************
Dialog "Stretch" (IDD_STRETCH)
*******************************
/3830 "Stretch"
Stretch
*******************************
Dialog "Array" (IDD_ARRAY)
*******************************
/3142 "Rectangular"
Rectangular
/3143 "Circular"
Circular
/3144 "Bevel"
Bevel
#Comments: Bevel = Inclined, Sloping, Slanted
/3162 "In Contour"
In Contour
/3158 "Bevel Angle:"
Bevel Angle:
/3154 "Number of Items:"
Number of Items:
#Comments: Number => amount
*******************************
Dialog "General XY" (IDD_GENERAL_XY)
*******************************
/30287 "General XY"
General XY
*******************************
Dialog "Cut Parameters" (IDD_LASER)
*******************************
/4360 "Cut Parameters"
Cut Parameters
/4362 "Entity"
Entity
/4363 "Chain"
Chain
#Comments: A set of connected or related things
/4361 "Cutting Type"
Cutting Type
/30703 "Geo-Type"
Geo-Type
#Comments: Geo => geometry
/4377 "Pre Line"
Pre Line
#Comments: Line => entity line
/30704 "Approach (Entry/Lead-in)"
Approach (Entry/Lead-in)
/4422 "Speed"
Speed
/30767 "Cutting Mode"
Cutting Mode
/30768 "Contour Size/Cutting Speed"
Contour Size/Cutting Speed
/4387 "Cutting Direction"
Cutting Direction
/4424 "Corner"
Corner
/4425 "Z Option"
Z Option
#Comments: Parameters dealing with the Head movement along the Z axis
/4388 "Function"
Function
/4372 "Stop/Push Out"
Stop/Push Out
/30643 "Use Technology Table"
Use Technology Table
#Comments: Table => chart
/30705 "Approach Mode"
Approach Mode
/30769 "Contour Size:"
Contour Size:
/30826 "Mark"
Mark
/30904 "Use Technology Table for Entry and Exit"
Use Technology Table for Entry and Exit
*******************************
Dialog "Reposition and Head position" (IDD_REPOSITION)
*******************************
/3310 "Reposition And Head Position"
Reposition And Head Position
/3311 "Head Position"
Head Position
/3314 "Reposition:"
Reposition:
/3320 "Update"
Update
/3316 "Exit"
Exit
/3315 "Sheet Transformations, Manual Reposition And Head Position"
Sheet Transformations, Manual Reposition And Head Position
/3322 "Set To Current"
Set To Current
/3323 "New Manually"
New Manually
*******************************
Dialog "Check" (IDD_CHECK)
*******************************
/3190 "Check"
Check
/3188 "Convert Arc To Line Under Bulge"
Convert Arc To Line Under Bulge
#Comments: Line => long, thin mark; Bulge => Protrusion, projection
/3199 "Delete Entities Under Tolerance"
Delete Entities Under Tolerance
/3191 "Delete Duplicates"
Delete Duplicates
#Comments: Duplicates => copies
/3192 "Join All"
Join All
/3193 "Check Contours"
Check Contours
/3194 "Connect Contours"
Connect Contours
/3195 "Check Tolerance"
Check Tolerance
#Comments: Tolerance => Acceptance of the error; "Check" is here a NOUN!
/3196 "Connect Tolerance"
Connect Tolerance
#Comments: Tolerance => Acceptance of the error; "Connect" is here a NOUN!
/3189 "Bulge"
Bulge
#Comments: Protrusion, projection
*******************************
Dialog "Define Sheet Parameters" (IDD_DEF_PARAMS_SHEET)
*******************************
/30013 "Define Sheet Parameters"
Define Sheet Parameters
/30306 "Once Per Sheet"
Once Per Sheet
/30307 "Twice With Rotation"
Twice With Rotation
/30308 "Twice With Flip"
Twice With Flip
/3382 "Sheet Size:"
Sheet Size:
/3385 "Number of Parts:"
Number of Parts:
#Comments: Number => amount
/30305 "Run The Program:"
Run The Program:
/3386 "X:"
X:
/3387 "Y:"
Y:
/3383 "X:"
X:
/3384 "Y:"
Y:
/3405 "Set Sheet=Part"
Set Sheet=Part
/3388 "Total:"
Total:
/30577 "Technology Parameters:"
Technology Parameters:
/515 "Material:"
Material:
/6532 "Thickness:"
Thickness:
/30905 "Technology Table"
Technology Table
/31194 "Sheet Area and Weight"
Sheet Area and Weight
/50007124 "Area"
Area
/30645 "Weight"
Weight
*******************************
Dialog "Add Dimension / Text" (IDD_DIM_TEXT)
*******************************
/3773 "Add Dimension / Text"
Add Dimension / Text
/3775 "Dimension"
Dimension
/3962 "Text"
Text
/3792 "Along"
Along
#Comments: In the direction of
/3793 "Under"
Under
/3324 "Add"
Add
/3778 "Text Angle"
Text Angle
/3796 "Enter Text:"
Enter Text:
/3791 "Dim Text Location"
Dim Text Location
#Comments: Dim => shortcut of "dimension";
/3569 "Show in Nest"
Show in Nest
*******************************
Dialog "Part" (IDD_DEF_PARAMS_PART)
*******************************
/3367 "Part Size:"
Part Size:
/3369 "Y"
Y
/3258 "Number of Holes:"
Number of Holes:
#Comments: Number => amount
/3370 "Lines"
Lines
/3371 "Arcs"
Arcs
/3372 "Circles"
Circles
/50003133 "Points"
Points
/3375 "Parts in Geometry"
Parts in Geometry
/3374 "Entities"
Entities
/30118 "Create Unique IDs For Entities\n(For Parametric Design Usage)"
Create Unique IDs For Entities\n(For Parametric Design Usage
#Comments: Each entity receives a different identification character
/3368 "X"
X
/31207 "Bend Line K Factor"
Bend Line K Factor
#Comments: Line => long thin mark denoting bending
*******************************
Dialog "General" (IDD_NEW_PRT_NST_PP)
*******************************
/4440 "General"
General
/4443 "X:"
X:
/4444 "Y:"
Y:
/4442 "Part Size"
Part Size
/4446 "Normal"
Normal
/4447 "Formed"
Formed
/4448 "Irregular"
Irregular
/4454 "Sheet Thickness:"
Sheet Thickness:
/4445 "Sheet Type"
Sheet Type
/31120 "Bend Line K Factor"
Bend Line K Factor
#Comments: Line => long thin mark denoting bending
*******************************
Dialog "Punched Sheet" (IDD_DIALOG_SLANT_HOLE_GRID)
*******************************
/3410 "Punched Sheet"
Punched Sheet
/3411 "Hole Diameter (D)"
Hole Diameter (D)
/3412 "Diagonal Distance (t)"
Diagonal Distance (t)
/3413 "Slanted Angle (A)"
Slanted Angle (A)
#Comments: Slanted -> inclined, sloping
/3414 "X Offset From Left (e1)"
X Offset From Left (e1)
/3415 "X Offset From Right (e2)"
X Offset From Right (e2)
/3416 "Y Offset Top (f1)"
Y Offset Top (f1)
/3417 "Y Offset From Bottom (f2)"
Y Offset From Bottom (f2)
*******************************
Dialog "Nest Data" (IDD_NEST_DATA)
*******************************
/3165 "Nest Data"
Nest Data
/3168 "User Data"
User Data
/3169 "Del Part"
Del Part
#Comments: Del => abbreviation of "delete"
/475 "Edit Part"
Edit Part
/30646 "Properties..."
Properties...
*******************************
Dialog "Ask tools during rotation" (IDD_DIALOG_ASK_TOOLS_DURING_ROTATION)
*******************************
/4470 "Ask tools during rotation"
Ask tools during rotation
/4473 "Confirm"
Confirm
/4474 "Esc rotation"
Esc rotation
/4471 "Index"
Index
/4472 "New"
New
*******************************
Dialog "Offset Contour" (IDD_OFFSET_CONTOUR)
*******************************
/4587 "Offset Contour"
Offset Contour
/3289 "Offset"
Offset
*******************************
Dialog "Sheet Processing Technology" (IDD_SHT_PRC_TECHNOLOGY)
*******************************
/4524 "Sheet Processing Technology"
Sheet Processing Technology
/4560 "Processing Strategy:"
Processing Strategy:
/4525 "Tool's Processing Strategy"
Tool's Processing Strategy
/4559 "Blue-All Sheet,Red-Per Part"
Blue-All Sheet,Red-Per Part
/473 "Parts:"
Parts:
/4530 "Vertical Cuts:"
Vertical Cuts:
/4531 "Horizontal Cuts:"
Horizontal Cuts:
/4527 "Optimization Strategy"
Optimization Strategy
/4526 "No. of Lines Per Stripe:"
No. of Lines Per Stripe:
#Comments: Amount of rows in each stripe
/4532 "Remove Stripes:"
Remove Stripes:
/4556 "Left to Right"
Left to Right
/4557 "Right to Left"
Right to Left
/4555 "Direction of Stripes Removal"
Direction of Stripes Removal
/4533 "Removing Tool:"
Removing Tool:
/4540 "Stripe"
Stripe
*******************************
Dialog "Punch And Cut Warnings" (IDD_PUNCH_WARN_PP)
*******************************
/4660 "Punch And Cut Warnings"
Punch And Cut Warnings
/4663 "CAM in Clamp Dead Zone"
CAM in Clamp Dead Zone
/4664 "Over Travel in Y"
Over Travel in Y
/4665 "Punch Destroys Part"
Punch Destroys Part
/4666 "No Station For Tool"
No Station For Tool
/4667 "Punch Less Than 1.5 Tool"
Punch Less Than 1.5 Tool
/4668 "Punch Step Less Than Thickness"
Punch Step Less Than Thickness
/4669 "Over Tonnage"
Over Tonnage
/4670 "CAM is Out of X Working Range"
CAM is Out of X Working Range
/4661 "Technological Limits"
Technological Limits
/4662 "Manual Reposition"
Manual Reposition
*******************************
Dialog "Auto Punch Parameters" (IDD_AUTOPUNCH_PARAMS_PP)
*******************************
/4621 "AutoPunch Parameters"
AutoPunch Parameters
/13168 "Holes"
Holes
/6517 "Notches"
Notches
/4639 "Perform Crunches"
Perform Crunches
/4644 "Maximum Crunch Tool Ratio (Width/Height):"
Maximum Crunch Tool Ratio (Width/Height):
#Comments: Maximum proportional relation of the tool that performs the crunch
/4651 "Slitting"
Slitting
#Comments: Making a straight narrow cut;
/4632 "Use Tool Library"
Use Tool Library
/4633 "Use Setup File"
Use Setup File
/4635 "Select Setup"
Select Setup
/4622 "Tools' Spacing Defaults"
Tools' Spacing Defaults
/4623 "Minimum Tool Overlap:"
Minimum Tool Overlap:
#Comments: Minimum value of tool's overlap
/4625 "Scallop For Round Tools:"
Scallop For Round Tools:
/4626 "Cutting Tools Restrictions"
Cutting Tools Restrictions
/4627 "Minimum Width:"
Minimum Width:
/4628 "Maximum Width:"
Maximum Width:
/4631 "Tool Selecting Preference:"
Tool Selecting Preference:
/4630 "Best Tools"
Best Tools
/4629 "Minimum Tools"
Minimum Tools
/4636 "Odd Hits, Then Even Hits:"
Odd Hits, Then Even Hits:
#Comments: Even, means that the number can be divided by 2, odd - that it cannot
/4637 "Never"
Never
/4638 "Always"
Always
/4655 "For Notching And Slitting"
For Notching And Slitting
/4645 "(Allow Up To %d More Hits To Reduce Tool)"
(Allow Up To %d More Hits To Reduce Tool)
/4650 "Maximum Offset:"
Maximum Offset:
/4649 "Minimum Offset:"
Minimum Offset:
/4511 "Files"
Files
/4501 "Batch File Name"
Batch File Name
/4512 "Select BATCH"
Select BATCH
/4502 "LOG File Name"
LOG File Name
/4513 "Select LOG"
Select LOG
/4509 "Accept Changes"
Accept Changes
/4508 "Change Files"
Change Files
/4510 "Discard Changes"
Discard Changes
/4514 "Machines to use"
Machines to use
/4515 "As in Batch"
As in Batch
/4516 "All Machines"
All Machines
/4517 "Current Machine"
Current Machine
/4503 "Now Processing Line"
Now Processing Line
/4504 "Last LOG Entries"
Last LOG Entries
/4505 "Start Batch"
Start Batch
/4506 "STOP!"
STOP!
#Comments: Cease, quit
*******************************
Dialog "Auto Cut" (IDD_AUTO_HOLES)
*******************************
/4365 "AutoCut"
AutoCut
#Comments: From cncKad -> CAM menu -> Cut CAM -> AutoCut tab
/30861 "Use Rounded Entry"
Use Rounded Entry
/4479 "Global Angle"
Global Angle
/4432 "Rounds"
Rounds
/3738 "ALL"
ALL
/4431 "Hole Type"
Hole Type
#Comments: Sort, kind of the hole
/15070 "Delete Old Before Running"
Delete Old Before Running
#Comments: Delete previous cuts/punches, before executing new
/15203 "Perform"
Perform
#Comments: do, carry out, execute
/15155 "Only Contours To Be Selected"
Only Contours To Be Selected
#Comments: Select only contours
/4378 "Side"
Side
/15049 "Parts"
Parts
/15050 "Entry On:"
Entry On:
/15051 "Point:"
Point:
/434 "Common Cut"
Common Cut
/30770 "Corner Treatment"
Corner Treatment
*******************************
Dialog "Change Entities Attribute" (IDD_DLG_CHANGE_ENT_ATTRIBUTE)
*******************************
/4740 "Change Entities Attribute"
Change Entities Attribute
/4745 "Change"
Change
/4741 "Color:"
Color:
/4742 "Line Type:"
Line Type:
#Comments: Line => long, thin mark
/4743 "Select Color"
Select Color
/4744 "Select Line Type"
Select Line Type
#Comments: Line => long, thin mark
*******************************
Dialog "PPO File" (IDD_PPO_FILE)
*******************************
/30417 "PPO File"
PPO File
/30 "Snap = "
Snap =
/316 "Dim = "
Dim =
#Comments: Dim => shortcut of "dimension";
/56 "Proc ="
Proc =
#Comments: Proc => shortcut of "Processing";
/318 "Index ="
Index =
#Comments: Index => rotating station for the tool on a turret
/319 "Side ="
Side =
/4133 "Cursor"
Cursor
/127 "View = "
View =
/321 "Sheet ="
Sheet =
/322 "No Tool"
No Tool
*******************************
Dialog "Place Mode" (IDD_NEST_PLACE_MODE)
*******************************
/323 "Place Mode"
Place Mode
#Comments: In cncKad -> Open a NST file -> Load a DFT and place it on the sheet
-> Press "O" to choose offset mode
/325 "Offset Mode"
Offset Mode
*******************************
Dialog "Shapes" (IDD_AP_SHAPES_PP)
*******************************
/15160 "Special Punching"
Special Punching
/15161 "Profile:"
Profile:
/327 "Setup..."
Setup...
/334 "Tooling"
Tooling
#Comments: Tools or implements for work
/328 "Remove Tool"
Remove Tool
/331 "Add Shape"
Add Shape
/332 "Remove Shape"
Remove Shape
/31121 "Predefined Shapes"
Predefined Shapes
/31122 "Add Predefined Shape"
Add Predefined Shape
/31123 "Remove Predefined Shape"
Remove Predefined Shape
*******************************
Dialog "Distance for punches" (IDD_DIALOG_DIST_FOR_SINGLE_ON_PUNCHED)
*******************************
/30014 "Distance for punches"
Distance for punches
/30292 "Cannot perform the operation. You may not have sufficient permission"
Cannot perform the operation. You may not have sufficient permission
*******************************
Dialog "Unload Part" (IDD_DIALOG_UNLOAD_PART)
*******************************
/30610 "Grab Part, then last hit"
Grab Part, then last hit
/30647 "Select Cups..."
Select Cups...
/30648 "Move:"
Move:
/30649 "Deposit in:"
Deposit in:
*******************************
Dialog "Select path" (IDD_CONVERT_OLD_TOOL_DLG)
*******************************
/30771 "Select path"
Select path
#Comments: Path => Track to file's location
/30772 "Select directory of DFT files"
Select directory of DFT files
/30773 "View LOG File"
View LOG File
*******************************
Dialog "Select Tool Number" (IDD_SELECT_TOOL_NUM_DLG)
*******************************
/30774 "Select Tool Number"
Select Tool Number
/30775 "Resolve ToolN Manually"
Resolve ToolN Manually
#Comments: N => number; NOT quantity NOR amount
/30776 "For Tool"
For Tool
/30777 "tool"
tool
/30778 "More than one ToolN was found."
More than one ToolN was found.
#Comments: N => number; NOT quantity NOR amount
/30779 "Please select ToolN:"
Please select ToolN:
*******************************
Dialog "Add Pierce" (IDD_ADD_PIERCE)
*******************************
/30508 "Add Pierce"
Add Pierce
*******************************
Dialog "Split Array" (IDD_SPIT_ARRAY)
*******************************
/30015 "Original Array"
Original Array
/30016 "Split on X Dimension"
Split on X Dimension
/30017 "Split on Y Dimension"
Split on Y Dimension
/30018 "First Array New N:"
First Array New N:
#Comments: N => number
/30019 "Distance Between Arrays:"
Distance Between Arrays:
/30020 "Perform 'Cut Sheet' Between Arrays"
Perform 'Cut Sheet' Between Arrays
*******************************
Dialog "Slitting" (IDD_AUTO_SLITTING_PP)
*******************************
/30993 "Micro And Wire Joints Data"
Micro And Wire Joints Data
/31050 "Minimal Number of MJs For This Part:"
Minimal Number of MJs For This Part:
#Comments: MJs => MicroJoints
/31051 "Use MJ Tools"
Use MJ Tools
#Comments: MJ => MicroJoint
/31052 "MJ Width:"
MJ Width:
#Comments: MJ => MicroJoint
/31222 "Apply MicroJoints"
Apply MicroJoints
/31053 "On One Edge"
On One Edge
/31054 "On Both Edges"
On Both Edges
/31055 "MJ on Corners (Recomendation)"
MJ on Corners (Recomendation)
#Comments: MJ => MicroJoint
/31208 "Wire Joint Parameters"
Wire Joint Parameters
/31227 "MJ Width at Sheet Edge:"
MJ Width at Sheet Edge:
#Comments: MJ => MicroJoint
/31228 "MicroJoint Parameters"
MicroJoint Parameters
/31229 "Every Corner"
Every Corner
/31230 "Apply Wire Joints"
Apply Wire Joints
*******************************
Dialog "Bend Line Parameters" (IDD_DRAW_BEND_LINE)
*******************************
/31056 "Bend Line Parameters"
Bend Line Parameters
#Comments: Line => long thin mark denoting bending
/31124 "Use Sheet K Factor"
Use Sheet K Factor
/31125 "K Factor"
K Factor
/4766 "Compensation"
Compensation
*******************************
Dialog "Display Bend Lines" (IDD_DLG_DISPLAY_BEND_LINES)
*******************************
/31038 "Show Bend Lines"
Show Bend Lines
/31126 "Show Angle (A)"
Show Angle (A)
/31127 "Show Radius (R)"
Show Radius (R)
/31128 "Show K Factor (K)"
Show K Factor (K)
/31129 "Show Compensation (C)"
Show Compensation (C)
*******************************
Dialog "Add Shear" (IDD_SHEAR)
*******************************
/4750 "Add Shear"
Add Shear
/4760 "Scrap"
Scrap
#Comments: Sheet leftovers
/4758 "Shear"
Shear
/4095 "Bin Number:"
Bin Number:
#Comments: Bin => place to which cut/punched parts will fall
/4757 "Tool"
Tool
/4759 "Auto Index"
Auto Index
/4768 "Process All Sheet"
Process All Sheet
/4777 "Best"
Best
/4767 "Auto Shear"
Auto Shear
#Comments: Automatic shearing
/4780 "Scrap"
Scrap
#Comments: Sheet leftovers
/4781 "Max Size"
Max Size
/4782 "X"
X
/4783 "Y"
Y
/4784 "Bottom Scrap"
Bottom Scrap
#Comments: Scrap => Sheet leftovers
/4423 "Mode"
Mode
/4786 "Max Y"
Max Y
#Comments: Max. => maximal
/4747 "Bin"
Bin
#Comments: Place to which cut/punched parts will fall
/4748 "Auto Bin Selection"
Auto Bin Selection
/376 "Hit"
Hit
/378 "Y Size"
Y Size
*******************************
Dialog "Edit Shear" (IDD_EDIT_SHEAR)
*******************************
/4770 "Edit Shear"
Edit Shear
/4772 "Shear Size"
Shear Size
/4771 "Shear Corner"
Shear Corner
*******************************
Dialog "Smooth entities" (IDD_SMOOTH_CONTOUR)
*******************************
/8503 "Smooth Entities"
Smooth Entities
/8505 "Chain"
Chain
#Comments: A set of connected or related things
/8506 "Contour"
Contour
/8507 "Max Bulge:"
Max Bulge:
#Comments: Bulge => protrusion, projection
*******************************
Dialog "Corner Parameters" (IDD_CORNER_CUTING)
*******************************
*******************************
Dialog "Z Option Parameters" (IDD_Z_OPTION)
*******************************
/30191 "After Cut Gap"
After Cut Gap
/4498 "Gap"
Gap
*******************************
Dialog "Add DFT Text" (IDD_ADD_DFT_TEXT)
*******************************
/3955 "Add DFT Text"
Add DFT Text
/3963 "Place"
Place
/3956 "Select Font"
Select Font
/3960 "Between Letters"
Between Letters
/3961 "Space Width"
Space Width
#Comments: Size of the 'Space' character
/3959 "Auto Spacing"
Auto Spacing
#Comments: Spacing => placing a 'space' between letters
*******************************
Dialog "Text" (IDD_ADD_WINDOWS_TEXT)
*******************************
/379 "Font"
Font
*******************************
Dialog "DFT Text" (IDD_PS_DFTTEXT)
*******************************
/3968 "DFT Text"
DFT Text
/3969 "Choose Your DFT Font Directory"
Choose Your DFT Font Directory
/3970 "Auto Spacing Factors (Font Size Percentage)"
Auto Spacing Factors (Font Size Percentage)
#Comments: Spacing => placing a 'space' between letters
/3971 "Space Between Letters"
Space Between Letters
/3972 "Width of Space Char"
Width of Space Char
#Comments: Char => abbreviation of "character" (-> sign)
*******************************
Dialog "MicroJoint" (IDD_MICROJOINT_DLG)
*******************************
/4797 "MicroJoint"
MicroJoint
/4791 "Split Position"
Split Position
#Comments: Split => divide
/4792 "At Hit Boundary"
At Hit Boundary
/4794 "At Snap Point"
At Snap Point
/4795 "At Specific Distance / Angle\n(From Entity's End)"
At Specific Distance / Angle\n(From Entity's End)
/15062 "Wire"
Wire
*******************************
Dialog "Edit DFT font" (IDD_EDIT_DFT_FONT)
*******************************
/3973 "Edit DFT Font"
Edit DFT Font
/380 "Directory Files"
Directory Files
/3974 "Select Font"
Select Font
*******************************
Dialog "Create new font" (IDD_ADD_DFT_FONT)
*******************************
/3977 "Create New Font"
Create New Font
/3982 "Create"
Create
/3978 "Font Name"
Font Name
/3979 "Font Width"
Font Width
/3980 "Font Height"
Font Height
/3981 "Font Descent"
Font Descent
#Comments: Descent => inclination, slope
*******************************
Dialog "Flanges Merging" (IDD_DIALOG_MERGE_FLANGES)
*******************************
/30033 "Flanges Merging"
Flanges Merging
#Comments:
/30085 "Offset From Entity End:"
Offset from entity End:
/30086 "Inside Bend Radius:"
Inside Bend Radius:
/30087 "Bend Angle:"
Bend Angle:
/30088 "Relief Width"
Relief Width
/30089 "Use K Factor"
Use K Factor
/30090 "Bend Allowance"
Bend Allowance
/30091 "Connection Type"
Connection Type
/30092 "Corner Properties"
Corner Properties
/30093 "Choose the desired merge type:"
Choose the desired merge type:
/30094 "K Factor (0..1):"
K Factor (0..1):
/30095 "Merge an existing flange"
Merge an existing flange
/30096 "Add a new Flange:"
Add a new Flange:
/30097 "Width (D2): "
Width (D2):
/30098 "Height (H2):"
Height (H2):
/30099 "Flange is all edge long"
Flange is all edge long
/30100 "New Flange Dimensions"
New Flange Dimensions
/30296 "OFF"
OFF
/383 "Show Preview"
Show Preview
/384 "Show CAM"
Show CAM
*******************************
Dialog "Add Pocket" (IDD_DIALOG_ADD_POCKET)
*******************************
/8522 "Add Pocket"
Add Pocket
/8518 "Depth And Thickness Parameters"
Depth And Thickness Parameters
/8515 "Cutting Depth:"
Cutting Depth:
#Comments: Depth of the cut
/8516 "Pocket Depth:"
Pocket Depth:
#Comments: Pocket => dip downward
/8517 "Material Thickness:"
Material Thickness:
/8509 "Tool Parameters"
Tool Parameters
/8511 "End Radius:"
End Radius:
/8512 "Effective Diameter:"
Effective Diameter:
/8513 "Cutting Diameter:"
Cutting Diameter:
/8514 "Cutting Overlap:"
Cutting Overlap:
/15201 "Mill Tool"
Mill Tool
/386 "hidden:"
hidden:
/3327 "Set CAMs To Current"
Set CAMs To Current
/3326 "Transformations"
Transformations
*******************************
Dialog "New Tube" (IDD_NEW_TUBE_PP)
*******************************
/388 "Profile"
Profile
*******************************
Dialog "Cutting Technology" (IDD_CUTTING_TECHNOLOGY)
*******************************
/389 "Cutting Technology"
Cutting Technology
/30349 "Contour Size Definition"
Contour Size Definition
/30655 "Action For Undersized Holes:"
Action For Undersized Holes:
/725 "From"
From
/392 "Open/Colored Contours"
Open/Colored Contours
/393 "Engrave"
Engrave
/30192 "Set1"
Set1
/30193 "Set2"
Set2
/3746 "Cut"
Cut
/15151 "Up to Size:"
Up to Size:
/30656 "Small:"
Small:
/30657 "Medium:"
Medium:
/30658 "Large:"
Large:
/50003260 "Min"
Min
/50003261 "Max"
Max
/30659 "Extra Large:"
Extra Large:
/391 "Overlap:"
Overlap:
/31078 "Push Out"
Push Out
/592 "Parts"
Parts
*******************************
Dialog "Common Cut Parameters" (IDD_LASER_CC_DLG)
*******************************
/8600 "Common Cut Parameters"
Common Cut Parameters
/8601 "Preparatory:"
Preparatory:
*******************************
Dialog "AutoPunch Holes" (IDD_AUTO_PUNCH_HOLES_PP)
*******************************
/30408 "AutoPunch Holes"
AutoPunch Holes
/15220 "One Hit Only With Matching Tool"
One Hit Only With Matching Tool
/30407 "Do Not Detect Groups of Single Punches"
Do Not Detect Groups of Single Punches
/4654 "For Holes"
For Holes
/396 "Crunch Holes Up To:"
Crunch Holes Up To:
/8215 "Crunch"
Crunch
/4656 "Wire Joint"
Wire Joint
/702 "Place Every:"
Place Every:
*******************************
Dialog "Select Nibble step" (IDD_STEP_ASK)
*******************************
/8063 "Select Nibble Step"
Select Nibble Step
/8190 "STEP = %3f (DISTANCE BETWEEN CENTERS = %s %.3f)"
STEP = %3f (DISTANCE BETWEEN CENTERS = %s %.3f)
*******************************
Dialog "Tool Reference Line" (IDD_TOOL_REF_LINE)
*******************************
/3840 "Tool Reference Line"
Tool Reference Line
#Comments: Line => entity line
/3841 "Select the 'Tool Reference Line':"
Select the 'Tool Reference Line':
/3842 "<<<Previous Line"
<<<Previous Line
#Comments: Line => entity line
/3843 "Next Line>>>"
Next Line>>>
*******************************
Dialog "Tools to Stations Assignment Errors" (IDD_ASSIGN_TOOLS_TO_STATS_ERRORS)
*******************************
/4586 "Tools to Stations Assignment Errors"
Tools to Stations Assignment Errors
*******************************
Dialog "Optimization Strategy" (IDD_TOOL_DATA_OPT)
*******************************
/4564 "Global Optimization"
Global Optimization
/4565 "Tool - Specific Optimization"
Tool - Specific Optimization
*******************************
Dialog "Tool Data" (IDD_CHIP_TOOL_DATA)
*******************************
/3937 "Tool Data"
Tool Data
/30531 "Total Length:"
Total Length:
/30532 "Teeth Num."
Teeth Num.
#Comments: Num => shortcut of "number"
/15199 "Feed per tooth:"
Feed per tooth:
/30533 "Cut Length:"
Cut Length:
*******************************
Dialog "Tool Data" (IDD_TOOL_DATA_SPECIAL)
*******************************
/3936 "ToolN"
ToolN
#Comments: N => number; NOT quantity NOR amount
/3935 "Comment"
Comment
/3943 "Tonn"
Tonn
#Comments: Tonn => abbreviation of "tonnage"
/31139 "Tool ID"
Tool ID
*******************************
Dialog "Operation" (IDD_OPERATION_DLG)
*******************************
/30535 "Operation"
Operation
/13161 "Status:"
Status:
/30536 "Message"
Message
*******************************
Dialog "Reposition Types" (IDD_TOOL_DATA_REPOSITION)
*******************************
/30008 "Reposition Types"
Reposition Types
/31189 "Global"
Global
*******************************
Dialog "Allowed station sizes" (IDD_ALLOWED_SIZES)
*******************************
/30660 "Allowed station sizes"
Allowed station sizes
/30661 "User defined"
User defined
/30662 "Types of sizes"
Types of sizes
/30866 "Set Fitting Station Size"
Set Fitting Station Size
#Comments: Fitting => suitable, proper
*******************************
Dialog "Close To Clamp" (IDD_CLOSE_TO_CLAMP)
*******************************
/30663 "Close To Clamp"
Close To Clamp
/30664 "On One Side"
On One Side
/30665 "On Both Sides"
On Both Sides
*******************************
Dialog "Confirm stations" (IDD_CONFIRM_STATIONS)
*******************************
/30794 "Confirm Stations"
Confirm Stations
/30795 "Correct Stations"
Correct Stations
*******************************
Dialog "Import Setup" (IDD_SETUP)
*******************************
/666 "Import Setup"
Import Setup
/6547 "Tolerance:"
Tolerance:
#Comments: Acceptance
/6549 "Bulge (Chord Error):"
Bulge (Chord Error):
#Comments: Bulge => Protrusion, projection
/6550 "Min. Circle Radius:"
Min. Circle Radius:
/6548 "Min Hole Size:"
Min Hole Size:
/6546 "Min. Parameters"
Min. Parameters
/6551 "Text Size:"
Text Size:
/6555 "Ignore CR/LF"
Ignore CR/LF
/6553 "Fixed Group for DFT"
Fixed Group for DFT
#Comments: Fixed => permanent
/6554 "Separate Layers for DXF"
Separate Layers for DXF
/6560 "Directions"
Directions
/6565 "Mirror Allowed"
Mirror Allowed
/6566 "Default Buffer:"
Default Buffer:
/6567 "Back to Default"
Back to Default
/6557 "Check Material for DFT"
Check Material for DFT
/30324 "Mirror Y Axis During Import"
Mirror Y Axis During Import
/30498 "Tolerance For DFT"
Tolerance For DFT
/30514 "Default Hole Buffer:"
Default Hole Buffer:
/30801 "Create Subnest for DXF/DWG Files"
Create Subnest for DXF/DWG Files
/31200 "Keep Colors and Line Types"
Keep Colors and Line Types
#Comments: Import all layers as they are; Line => long, thin mark
/31154 "Convert All to Solid White"
Convert All to Solid White
/31155 "Layers Import Mode"
Layers Import Mode
*******************************
Dialog "Import CAD-files" (IDD_IMPORT)
*******************************
/6500 "Import CAD-files"
Import CAD-files
/6510 "CAD files to import"
CAD files to import
/661 "Browse"
Browse
/6502 "cm"
cm
/6503 "Inches"
Inches
/6504 "Feet"
Feet
/6512 "Import Units"
Import Units
/6513 "File format"
File format
/6515 "Texts"
Texts
/6516 "Lines, Arcs, Circles"
Lines, Arcs, Circles
/6514 "Ignore internals"
Ignore internals
/6520 "No Sizes"
No Sizes
/6521 "Material:"
Material:
/6518 "Quantity:"
Quantity:
/6507 "Setup"
Setup
/6519 "Make DSN-files"
Make DSN-files
*******************************
Dialog "Material Mismatch" (IDD_MAT_MIS)
*******************************
/6525 "Material Mismatch"
Material Mismatch
/6526 "Warning!: Material mismatch while import:"
Warning!: Material mismatch while import:
/6528 "Import material:"
Import material:
/6530 "Sheet material:"
Sheet material:
/6529 "Import material"
Import material
/6531 "Sheet material"
Sheet material
/6527 "Cad_name"
Cad_name
#Comments: Name of Imported CAD file: for example xxxxx.dwg.... (CAD - computer
aided design )
*******************************
Dialog "Layers filter" (IDD_DIALOG_IMPORT_LAYERS)
*******************************
/30499 "Layers filter"
Layers filter
/30502 "Model:"
Model:
/30503 "Layout:"
Layout:
/30914 "Make all layers solid white"
Make all layers solid white
#Comments: solid => continuous, constant, intact
/31156 "Import All Multiple Selected files as in current layer selection"
Import All Multiple Seletced files as in current layer selection
/30376 "Param1:"
Param1:
/30377 "Param2:"
Param2:
/30378 "Param3:"
Param3:
/30379 "Param4:"
Param4:
/30380 "Param5:"
Param5:
/30381 "Param6:"
Param6:
/30382 "Param7:"
Param7:
/30383 "Param8:"
Param8:
/30384 "Param9:"
Param9:
/30385 "Param10:"
Param10:
/30386 "Param11:"
Param11:
/30387 "Param12:"
Param12:
*******************************
Dialog "Languages" (IDD_LANG_DLG)
*******************************
/6036 "Languages"
Languages
/439 "Character Set:"
Character Set:
*******************************
Dialog "Module not supported" (IDD_PLUG_NO_SUPPORT)
*******************************
/6035 "Module not supported"
Module not supported
/441 "Sorry, this module is not supported by the plug."
Sorry, this module is not supported by the plug.
/442 "If you wish to activate this module, please"
If you wish to activate this module, please
*******************************
Dialog "cncKad License" (IDD_DIALOG_REMAINED_TIME)
*******************************
/437 "cncKad License"
cncKad License
*******************************
Dialog "Yes No To All" (IDD_FOUR_BUTTONS_DIALOG)
*******************************
/30157 "Yes No To All"
Yes No To All
/3004 "Yes"
Yes
/30519 "Yes To All"
Yes To All
/3005 "No"
No
/30520 "No To All"
No To All
*******************************
Dialog "Auto Processing" (IDD_DIALOG_PROCESS)
*******************************
/30036 "Completed SubNets: 4\nBest efficiency for current SubNest:43%\nCompleted
sheets for current SubNest: 5 / 12"
Completed SubNests: 4\nBest efficiency for current SubNest:43%\nCompleted sheets
for current SubNest: 5 / 12
/244 "Elapsed Time:"
Elapsed Time:
/246 "Save file when done"
Save file when done
*******************************
Dialog "Import Files" (IDD_DIALOG_IMPORT_FILES)
*******************************
/256 "Import Files"
Import Files
/262 "Add..."
Add...
/4201 "Import Units"
Import Units
/50003137 "Texts"
Texts
/267 "Lines, Arcs,\nCircles,Points"
Lines, Arcs,\nCircles,Points
/280 "Setup..."
Setup...
/281 "Material Filter:"
Material Filter:
/285 "Thickness Filter"
Thickness Filter
/286 "File Filters"
File Filters
/287 "File Extension:"
File Extension:
/298 "Ignore Internals"
Ignore Internals
/299 "Preview"
Preview
/303 "Quantity:"
Quantity:
#Comments: def. => abbreviation of "defined"
/304 "Material"
Material
/305 "Preview"
Preview
/306 "File Name"
File Name
/307 "Selected Files"
Selected Files
/308 "Directory Files"
Directory Files
/311 "Update List"
Update List
/315 "Default Mat"
Default Mat
#Comments: Mat => shortcut of "material"
/317 "Default Thickness"
Default Thickness
*******************************
Dialog "Import File" (IDD_DIALOG_IMPORT_FILES_CK)
*******************************
/320 "Import File"
Import File
/324 "Add..."
Add...
/326 "Lines, Arcs,\nCircles"
Lines, Arcs,\nCircles
/329 "Material Filter:"
Material Filter:
/330 "Thickness Filter"
Thickness Filter
/333 "File Filters"
File Filters
/335 "File Extension:"
File Extension:
/336 "Ignore Internals"
Ignore Internals
/338 "Preview"
Preview
/340 "Def. Quantity:"
Def. Quantity:
#Comments: def. => abbreviation of "defined"
/341 "Material"
Material
/342 "Preview"
Preview
/348 "File Name"
File Name
/377 "Selected Files"
Selected Files
/310 "Selected:"
Selected:
/382 "Update List"
Update List
*******************************
Dialog "Languages" (IDD_LANG_OPTIM)
*******************************
/50003190 "Languages"
Languages
*******************************
Dialog "Grill" (IDD_GRILL)
*******************************
/50003180 "Grill"
Grill
/50003181 "X-start"
X-start
/50003182 "Y-start"
Y-start
*******************************
Dialog "Sheet Definitions" (IDD_SHEET_DEFS)
*******************************
/50003280 "Sheet Definitions"
Sheet Definitions
/50003281 "Select Sheet"
Select Sheet
/50003289 "Sheet Offsets"
Sheet Offsets
/50003294 "Material Type"
Material Type
/50003125 "Description"
Description
/50003283 "Width (Y) (%s)"
Width (Y) (%s)
/50003284 "Length (X) (%s)"
Length (X) (%s)
/50003282 "Dimensions"
Dimensions
/50003295 "Thickness (%s)"
Thickness (%s)
/50003288 "Total Parts Area (%s)"
Total Parts Area (%s)
/50003290 "X-origin"
X-origin
#Comments: Origin => the starting point is in X
/50003292 "Y-origin"
Y-origin
#Comments: Origin => the starting point is in Y
/50003291 "X-end"
X-end
/50003293 "Y-end"
Y-end
/50003007 "Set"
Set
/50003285 "Width Length Description"
Width Length Description
/50003286 "Number of Layers"
Number of Layers
#Comments: Number => amount
/50003287 "Number of Runs"
Number of Runs
*******************************
Dialog "Global Info" (IDD_GLOBAL_INFO)
*******************************
/50003160 "Global Info"
Global Info
#Comments: Info => shortcut of "information"; General information
/50003163 "Locked"
Locked
/50003216 "Buffer Size"
Buffer Size
/699 "Use Rectangular Border"
Use Rectangular Border
/50003178 "Use Part Border"
Use Part Border
/50003174 "Left"
Left
/50003010 "Load From DFT"
Load From DFT
/50003167 "Direction"
Direction
/50009031 "Apply to All Parts"
Apply to All Parts
/50009032 "Apply to Selected Parts Only"
Apply to Selected Parts Only
/50009030 "Apply to"
Apply to
/31232 "Center Description"
Center Description
/395 "Material Type"
Material Type
/30037 "Part Fonts"
Part Fonts
/615 "Set"
Set
/30038 "Part Description Font Size"
Part Description Font Size
/30039 "Part's Internal Text Font Size"
Part's Internal Text Font Size
/30522 "Hole Buffer"
Hole Buffer
*******************************
Dialog "Sheet Array" (IDD_SHEET_ARRAY)
*******************************
/30237 "Sheet Array"
Sheet Array
/421 "User Defined X Step"
User Defined X Step
/422 "Min X Step"
Min X Step
/423 "Right Common Cut"
Right Common Cut
/424 "Left Common Cut"
Left Common Cut
/425 "User Defined Y Step"
User Defined Y Step
/426 "Min Y Step"
Min Y Step
/427 "Top Common Cut"
Top Common Cut
/428 "Bottom Common Cut"
Bottom Common Cut
/50003273 "Grid X"
Grid X
/50003274 "Enable Quantity Overflow"
Enable Quantity Overflow
/429 "Keep As Array "
Keep As Array
/50003275 "X step (%s)"
X step (%s)
/50003276 "Y step (%s)"
Y step (%s)
/50003271 "Columns"
Columns
/50003272 "Rows"
Rows
/432 "X Direction"
X Direction
/433 "Y Direction"
Y Direction
*******************************
Dialog "Display Parts on Sheet" (IDD_DISPLAY_PARTS)
*******************************
/50003120 "Display Parts On Sheet"
Display Parts On Sheet
/50003124 "Fill With Color"
Fill With Color
/50003121 "Part's Contours"
Part's Contours
/50003126 "Part Name"
Part Name
/50003127 "Part Number"
Part Number
/50003136 "Contours, Lines, Arcs, Circles"
Contours, Lines, Arcs, Circles
/545 "Internals"
Internals
*******************************
Dialog "Color Selection" (IDD_COLORS)
*******************************
/30285 "Color Selection"
Color Selection
/50003009 "Del"
Del
#Comments: Del => abbreviation of "delete"
/50003112 "General Objects"
General Objects
/50003113 "Files"
Files
/50003111 "Objects"
Objects
*******************************
Dialog "Choose fonts" (IDD_FONTS)
*******************************
/30361 "Choose fonts"
Choose fonts
/50003152 "Parts window"
Parts window
/50003153 "Printer"
Printer
/50003154 "Restore Default"
Restore Default
/50003006 "Close"
Close
*******************************
Dialog "ORDER" (IDD_ORDER)
*******************************
/436 "ORDER"
ORDER
/50003325 "Thickness: (%s)"
Thickness: (%s)
/30402 "Add The Following Parts To The Existing Order"
Add The Following Parts To The Existing Order
#Comments: Order => request
/30410 "Create a New Order For The Following Parts"
Create a New Order For The Following Parts
#Comments: Order => request
/30415 "Add Parts To Order"
Add Parts To Order
#Comments: Order => request
/31233 "Multiply Quantity By:"
Multiply Quantity By:
*******************************
Dialog "Sheet" (IDD_SHEET_DEFS_PP)
*******************************
/50003382 "Sheet Size:"
Sheet Size:
/50003633 "Offsets"
Offsets
/50003638 "dY:"
dY:
/50003634 "From Origin"
From Origin
#Comments: Origin => Beginning of coordinate system; from starting point
/50003635 "From End"
From End
/50003671 "Material List"
Material List
/50003383 "X:"
X:
/50003384 "Y:"
Y:
/50003381 "Select Sheet"
Select Sheet
/50003389 "Number of Sheets"
Number of Sheets
#Comments: Number => amount
/50003390 "Number of Layers"
Number of Layers
/30915 "Use AutoShear"
Use AutoShear
/50003405 "Set Sheet=Part"
Set Sheet=Part
*******************************
Dialog "Nest Report" (IDD_SUB_SOLS)
*******************************
/50003340 "Nest Report"
Nest Report
/440 "SubNests"
SubNests
/50003342 "Generate NST\DFT files and Print Reports"
Generate NST\DFT files and Print Reports
*******************************
Dialog "Print...\tCtrl+P" (IDD_PRINT)
*******************************
/50004032 "Parts"
Parts
/50004033 "Report"
Report
/6756 "Single page"
Single page
/6757 "Multiple pages"
Multiple pages
/6758 "Fixed scale"
Fixed scale
#Comments: Fixed => unchangeable, permanent
/50004040 "Format options"
Format options
/6763 "Scale factor"
Scale factor
#Comments: scale => magnification
/6759 "Options"
Options
/50004036 "Only current part"
Only current part
/50004037 "Print stripes (X - direction)"
Print stripes (X - direction)
/50004038 "Status line"
Status line
#Comments:Line => row
/50004039 "Frame"
Frame
/50004034 "Sheet & Report"
Sheet & Report
*******************************
Dialog "Start" (IDD_START)
*******************************
/50006810 "Start"
Start
#Comments: In AutoNest -> Press the button "Start/Continue AutoNest" (Blue arrow
) from the Nest Toolbar
/50006817 "Generate Multiple SubNest"
Generate Multiple SubNest
/50006819 "Use Best Sheets"
Use Best Sheets
/50006821 "Sheets Quantities"
Sheets Quantities
/50006822 "AutoNest Direction"
AutoNest Direction
/50006823 "Origin:"
Origin:
#Comments: Origin => starting point
/50006824 "Direction:"
Direction:
/50006820 "AutoNest Parameters"
AutoNest Parameters
/50006827 "Use\nBest"
Use\nBest
/50006826 "Round Parts Preferences"
Round Parts Preferences
/31082 "Rectangular Nesting"
Rectangular Nesting
/31083 "True Shape Nesting"
True Shape Nesting
/31084 "Nesting Strategy"
Nesting Strategy
/31085 "Advanced..."
Advanced...
*******************************
Dialog "Generate NST\DFT files and Print Reports" (IDD_GENERATE_AND_PRINT)
*******************************
/50003350 "Generate NST\DFT files and Print Reports"
Generate NST\DFT files and Print Reports
/50003352 "Generate NST"
Generate NST
/50003353 "Generate DFT"
Generate DFT
/30316 "Print all SubNests"
Print all SubNests
/50003357 "Print Nest Report"
Print Nest Report
/50003354 "Add to Queue"
Add to Queue
/50003351 "Generating"
Generating
/50003355 "Printing"
Printing
/50003358 "Print Setup"
Print Setup
/444 "Set filename Template..."
Set filename Template...
*******************************
Dialog "Working Defaults" (IDD_WORKING_DEFAULTS)
*******************************
/50003300 "Working Defaults"
Working Defaults
/50003306 "Clear Sheet"
Clear Sheet
/50003307 "Delete Part"
Delete Part
/445 "Ask Before Each Part's Update"
Ask Before Each Part's Update
/446 "Update Parts Automatically"
Update Parts Automatically
/447 "Never Update Parts "
Never Update Parts
/448 "Show File Link Status on Parts"
Show File Link Status on Parts
/30346 "Use Standard Report (As Defined in Machine Tab)"
Use Standard Report (As Defined in Machine Tab)
/450 "Use AutoNest Report"
Use AutoNest Report
/500087 "&Colors..."
&Colors...
/500088 "&Fonts"
&Fonts
/50003305 "Confirmation"
Confirmation
/451 "Part's Update Default"
Part's Update Default
/452 "Choose Report Type"
Choose Report Type
/30347 "Use AutoNest DOC/txt Report"
Use AutoNest DOC/txt Report
/30167 "Template File for Order Report:"
Template File for Order Report:
#Comments: Order => request
/30168 "Template File for SubNest Report:"
Template File for SubNest Report:
/30456 "Fill the parts' preview with color in the DOC Report"
Fill the parts' preview with color in the DOC Report
/30465 "Use Pounds For Weight"
Use Pounds For Weight
/31086 "Sort Parts"
Sort Parts
/31087 "Not Sorted"
Not Sorted
/31088 "Sort By Name"
Sort By Name
/31089 "Sort By Size (Smallest To Biggest)"
Sort By Size (Smallest To Biggest)
/31090 "Sort By Size (Biggest To Smallest)"
Sort By Size (Biggest To Smallest)
*******************************
Dialog "SubNests filenames' templates" (IDD_DIALOG_SUBNEST_FILENAME_TEMPLATES)
*******************************
/453 "SubNests filenames' templates"
SubNests filenames' templates
#Comments: in the dialog "Generate NST\\DFT file and Print Reports" press on th
e "filename template" button
/455 "SubNests filenames' template:"
SubNests filenames' template:
/456 "For example: <OrderName>---<SubNestNum>.<Ext>"
For example: <OrderName>---<SubNestNum>.<Ext>
*******************************
Dialog "Automatic Parts order " (IDD_DIALOG_AUTOMATIC_PARTS_ORDER)
*******************************
/457 "Automatic Parts Order "
Automatic Parts Order
#Comments: Order => sequence
/459 "Start Point:"
Start Point:
/460 "Orientation:"
Orientation:
/461 "Set Current SubNest Only"
Set Current SubNest Only
/462 "Set All SubNests"
Set All SubNests
/411 "Size X"
Size X
/414 "Size Y"
Size Y
/50004604 "Sheets"
Sheets
/50004607 "Cursor"
Cursor
/50004609 "Angle"
Angle
/407 "Material"
Material
/50004600 "Order Info"
Order Info
#Comments: Info => shortcut of "information", Order =>
/50004605 "Efficiency"
Efficiency
/50004606 "Number of Parts"
Number of Parts
#Comments: Number => quantity, amount
/339 "NUM"
NUM
#Comments: Num => shortcut of "number"
/50005008 "Qnt:"
Qnt:
#Comments: Qnt => shortcut of "quantity"
/466 "10 of 200"
10 of 200
/467 "Eff"
Eff
#Comments: Eff => shortcut of "efficiency"
/50004602 "SubNest"
SubNest
/30040 "Bin:"
Bin:
#Comments: Place to which cut/punched parts will fall
*******************************
Dialog "Create Rectangles / Ovals" (IDD_DIALOG_RECT_OVAL_CREATION)
*******************************
/468 "Create Rectangles / Ovals"
Create Rectangles / Ovals
*******************************
Dialog "Group Information" (IDD_DIALOG_GROUP_INFO)
*******************************
/470 "Group Information"
Group Information
/50003214 "Perimeter"
Perimeter
/50003220 "Lock Part"
Lock Part
/50003230 "Weight (KG)"
Weight (KG)
/50003236 "Part Size:"
Part Size:
/471 "part_dim"
part_dim
#Comments: Dim => shortcut of "dimension"
/472 "dimy"
dimy
#Comments: Dimention in axis Y
/490 "This Part Is Treated As Round"
This Part Is Treated As Round
*******************************
Dialog "Rotate Placement" (IDD_DIALOG_ROTATE)
*******************************
/474 "Rotate Placement"
Rotate Placement
/50004061 "Angle To Rotate (Degrees):"
Angle To Rotate (Degrees):
/50004065 "Rotate &Left"
Rotate &Left
/50004067 "Rotate &Right"
Rotate &Right
*******************************
Dialog "Edit Part" (IDD_DIALOG_EDIT_PART)
*******************************
/478 "Mirror X"
Mirror X
/479 "Mirror Y"
Mirror Y
/480 "Original Position"
Original Position
/481 "Buffer Around"
Buffer Around
/482 "Buffer Value"
Buffer Value
/483 "Rotation"
Rotation
/690 "Mirror"
Mirror
*******************************
Dialog "Part Information" (IDD_DIALOG_PART_INFO)
*******************************
/485 "Part Information"
Part Information
/50003217 "Print Report"
Print Report
/50003233 "Use Special Buffer"
Use Special Buffer
/50003231 "Min Qnt"
Min Qnt
#Comments: Min Qnt => minimum (minimal) quantity
/30351 "Buffer Size:"
Buffer Size:
/50003212 "Path"
Path
#Comments: Path => Track to parts' location
/50003232 "Max Qnt"
Max Qnt
#Comments: Max Qnt => maximum (maximal) quantity
/50003235 "Common Cuts"
Common Cuts
/50008034 "Distance:"
Distance:
/50008032 "Vertical:"
Vertical:
/50008033 "Horizontal:"
Horizontal:
/486 "Vert Type"
Vert Type
#Comments: Vert => vertical
/487 "Horz Type"
Horz Type
#Comments: Horz => horizontal
/491 "Edit Buffer..."
Edit Buffer...
/493 "Filler Part"
Filler Part
#Comments: Filler Part => small part which can fill in the free space in the nes
t;
/495 "PART IS DIRTY-------------------------------------------"
PART IS DIRTY-------------------------------------------
/496 "Holes' Buffer:"
Holes' Buffer:
/497 "Parts' Buffer:"
Parts' Buffer:
/149 "Update from DFT"
Update from DFT
/30169 "Part's User Data"
Part's User Data
*******************************
Dialog "Generate NC for all SubNests" (IDD_DIALOG_PRE_GEN_ALL_NC)
*******************************
/498 "Generate NC For All SubNests"
Generate NC For All SubNests
/500 "Nest Sheet"
Nest Sheet
/513 "Num Of SubNests:"
Num Of SubNests:
#Comments: Num => shortcut of "number"; amount
/514 "Shown SubNest:"
Shown SubNest:
/517 "File Information"
File Information
*******************************
Dialog "Part Materials" (IDD_DIALOG_MATS_LIST)
*******************************
/30419 "Part Materials"
Part Materials
/198 "Please select a material from the list below:"
Please select a material from the list below:
/30041 "End Point:"
End Point:
/30042 "Angle:"
Angle:
/30107 "Measure:"
Measure:
/30108 "DX:"
DX:
/30109 "DY:"
DY:
*******************************
Dialog "Print Doc Report" (IDD_DIALOG_PRINT_DOC_REPORT)
*******************************
/30174 "Print Doc Report"
Print Doc Report
/30170 "For Order"
For Order
#Comments: Order => request
/30171 "For Current SubNest"
For Current subnest
/30172 "Between the following"
Between the following
/30202 "To"
To
/30173 "Choose one of the following:"
Choose one of the following:
*******************************
Dialog "Ask User" (IDD_DIALOG2)
*******************************
/30420 "Ask User"
Ask User
*******************************
Dialog "Part Quantities" (IDD_DIALOG_PART_QUANTTITIES)
*******************************
/30675 "Parts' Quantity"
Parts' Quantity
/30676 "Go to Selected Subnest"
Go to Selected Subnest
/30677 "Delete Selected Placements"
Delete Selected Placements
*******************************
Dialog "Advanced AutoNest Parameters" (IDD_AUTO_NEST_ADVANCED)
*******************************
/31091 "Advanced AutoNest Parameters"
Advanced AutoNest Parameters
/31092 "Rotate To Best Angle"
Rotate To Best Angle
/30829 "Restore to Default"
Restore to Default
/31093 "True Shape Nesting Preference"
True Shape Nesting Preference
/31094 "Generate Groups"
Generate Groups
/50006828 "Faster"
Faster
/50003673 "Normal"
Normal
/50006829 "Better"
Better
/31195 "Over Night"
Over Night
*******************************
Dialog "NC Options" (IDD_NC_OPTIONS_PP)
*******************************
/31095 "NC Options"
NC Options
/31096 "Tool Ordering"
Tool Ordering
#Comments: ordering => sorting
/31097 "Use Order From Parts"
Use Order From Parts
#Comments: order => arrangement
/31098 "Automatically Order By Station"
Automatically Order By Station
#Comments: order => sort
/31099 "Automatically Order By Tool Shape"
Automatically Order By Tool Shape
#Comments: order => sort
/31234 "Clamps are automatically set to default positions before starting "
Clamps are automatically set to default positions before starting
*******************************
Dialog "Internal text" (SP_TEXT)
*******************************
/575 "Internal Text"
Internal Text
/576 "Text"
Text
/578 "Size of Font (%s)"
Size of Font (%s)
/579 "Base Angle"
Base Angle
/580 "Orientation Angle"
Orientation Angle
/582 "Part Description"
Part Description
/583 "Location:"
Location:
*******************************
Dialog "Rotation by angle" (IDD_DLG_ROTATE)
*******************************
/50004060 "Rotation by angle"
Rotation by angle
*******************************
Dialog "Rivets parameters" (IDD_PUT_RIVETS)
*******************************
/50003240 "Rivets parameters"
Rivets parameters
#Comments:
/50003247 "Place Rivets"
Place Rivets
#Comments:
/50003242 "Width (Y) (%s)"
Width (Y) (%s)
/50003243 "Length (X) (%s)"
Length (X) (%s)
/50003245 "Grid intervals"
Grid intervals
/50003244 "No"
No
/50003246 "Searching steps"
Searching steps
*******************************
Dialog "Sheet Area & Efficiency Evaluation" (IDD_SHEET_AREA)
*******************************
/50003250 "Sheet Area & Efficiency Evaluation"
Sheet Area & Efficiency Evaluation
/50003251 "Waste Calculations"
Waste Calculations
/50003252 "Area usage (%)"
Area usage (%)
/50003255 "Calc"
Calc
#Comments: Calc => abbreviation of "calculate"
/50003253 "Estimated total area (%s)"
Estimated total area (%s)
/50003254 "Estimated total length (%s)"
Estimated total length (%s)
/50003256 "Sheet length (%s)"
Sheet length (%s)
/50003257 "Sheet width (%s)"
Sheet width (%s)
/50003258 "No. Layers X Runs "
No. Layers X Runs
/50003262 "Remainders"
Remainders
/50003259 "Layers X Runs Calculations"
Layers X Runs Calculations
/50003264 "Layers"
Layers
/50003265 "Runs"
Runs
/50003263 "Optimum"
Optimum
*******************************
Dialog "AutoNest" (IDD_AUTO_NEST_SETT)
*******************************
/50001090 "Minimal Hole Dimensions"
Minimal Hole Dimensions
/50004018 "Exported Filenames Template"
Exported Filenames Template
/50004013 "Always Break Grouped Arrays When Export"
Always Break Grouped Arrays When Export
/50004014 "Don't Create Grouped Arrays in Auto Process"
Don't Create Grouped Arrays in Auto Process
/30812 "Use MultiHead if Available"
Use MultiHead if Available
/30871 "Use AutoNest Pro"
Use AutoNest Pro
/31105 "Default Subnests Sort Mode"
Default Subnests Sort Mode
/31103 "From Smallest To Biggest"
From Smallest To Biggest
/31104 "From Biggest To Smallest"
From Biggest To Smallest
*******************************
Dialog "Load Filler Parts" (IDD_FILLER_LIST)
*******************************
/50003700 "Load Filler Parts"
Load Filler Parts
#Comments: Filler Parts => small parts which can fill in the free space in the n
est;
/30350 "Filler Orders for Material:"
Filler Orders for Material:
/30114 "Filler Files Directory:"
Filler Files Directory:
*******************************
Dialog "Pattern editor" (IDD_EDIT_PATTERN)
*******************************
/672 "Pattern editor"
Pattern editor
/673 "Description"
Description
/674 "Original Area (%s)"
Original Area (%s)
/675 "Angle to rotate"
Angle to rotate
/676 "Buffer (%s)"
Buffer (%s)
/677 "Around"
Around
/679 "Down"
Down
/680 "Special"
Special
/683 "Seam"
Seam
#Comments: A line where two things join
/684 "Half"
Half
/687 "Original"
Original
/688 "Folding"
Folding
/689 "Cut"
Cut
/692 "Buffer"
Buffer
*******************************
Dialog "Parts" (IDD_PARTS)
*******************************
*******************************
Dialog "Create Intersection (Defined from .cpp file)" (IDD_CREATE_INTERSECTION)
*******************************
/30539 "Create Intersection (Defined from .cpp file)"
Create Intersection (Defined from .cpp file)
/15105 "Intersecting Body"
Intersecting Body
/15085 "D Diameter"
D Diameter
/15087 "Y Height"
Y Height
/15088 "R Corner Radius"
R Corner Radius
/15079 "Intersection Type"
Intersection Type
/15089 "L Distance"
L Distance
/15090 "V Offset"
V Offset
/15091 "Clearance"
Clearance
/15082 "Intersection Angles"
Intersection Angles
/15092 "A1 Cutting Angle"
A1 Cutting Angle
/15093 "A2 Rotation Angle"
A2 Rotation Angle
/15094 "A3 Twisting Angle"
A3 Twisting Angle
/15098 "Main Tube"
Main Tube
*******************************
Dialog "Tube Settings" (IDD_TUBE_SETTINGS)
*******************************
/30540 "Tube Settings"
Tube Settings
/15114 "Roughness"
Roughness
/30919 "Clamping Technique"
Clamping Technique
/30920 "Turning Jaws - Step A, Inside"
Turning Jaws - Step A, Inside
/30921 "Turning Jaws - Step B, Inside
Turning Jaws - Step B, Inside
/30922 "Turning Jaws - Step C, Outside"
Turning Jaws - Step C, Outside
/30923 "Drilling Jaws - Step A, Outside"
Drilling Jaws - Step A, Outside
/30924 "Drilling Jaws - Step B, Outside"
Drilling Jaws - Step B, Outside
/30925 "Drilling Jaws - Step C, Outside"
Drilling Jaws - Step C, Outside
/30926 "Process Type"
Process Type
/30927 "Blank"
Blank
/30928 "Continuous"
Continuous
/30929 "Working Position"
Working Position
/30930 "Upper"
Upper
*******************************
Dialog "Parameters" (IDD_DIALOG_VARS_LIST)
*******************************
/30028 "Parameters"
Parameters
/30541 "Enter Parameters:"
Enter Parameters:
/4558 "Trim Sheet"
Trim Sheet
#Comments: Trim => cut off
/30516 "Trim Sheet Tool:"
Trim Sheet Tool:
/30517 "All Around"
All Around
/30518 "One Side"
One Side
*******************************
Dialog "Split Skeleton" (IDD_SPLIT_SHEET_DIALOG)
*******************************
/30366 "Split Skeleton"
Split Skeleton
/30367 "After Parts"
After Parts
/30262 "Before Parts"
Before Parts
/30263 "Sequence"
Sequence
/30264 "Distance Between:"
Distance Between:
/30398 "Auto Tool Selection"
Auto Tool Selection
/30399 "Horizontal Tool:"
Horizontal Tool:
/30400 "Vertical Tool:"
Vertical Tool:
/3514 "Offset:"
Offset:
*******************************
Dialog "Cut Sheet" (IDD_CUT_SHEET_DIALOG)
*******************************
/30551 "Cut Sheet"
Cut Sheet
/717 "At Least One"
At Least One
/31106 "After First Hit"
After First Hit
/31107 "Before Last Hit"
Before Last Hit
*******************************
Dialog "Tool Setup file choosing" (IDD_CHOOSE_TOOL_SETUP_FILE)
*******************************
/30446 "Tool Setup file choosing"
Tool Setup file choosing
/4680 "Setup File"
Setup File
/4806 "Station Number:"
Station Number:
*******************************
Dialog "Choose Tool To Tool Library" (IDD_CHOOSE_TOOL_TOOL_LIB)
*******************************
/30447 "Choose Tool To Tool Library"
Choose Tool To Tool Library
/4813 "Add Tool To Tibrary"
Add Tool To Tibrary
/4804 "Create Tool..."
Create Tool...
/30872 "Rename"
Rename
/30390 "Copy Tools"
Copy Tools
/4004 "Delete Tool"
Delete Tool
/31108 "Tool Report"
Tool Report
*******************************
Dialog "Used tools" (IDD_USEDTOOLS_PP)
*******************************
/3940 "Used tools"
Used tools
/3948 "Delete Tool"
Delete Tool
/3952 "Tool Functions..."
Tool Functions...
/3949 "Make Optimization"
Make Optimization
/3953 "Order by Mouse"
Order by Mouse
#Comments: Order => Make a sequence
/3947 "Change Tool"
Change Tool
/650 "Quantity"
Quantity
/3826 "Use Current NC"
Use Current NC
/3829 "Turret Setups"
Turret Setups
/3828 "NC exists"
NC exists
/15206 "Group / Ungroup"
Group / Ungroup
/30895 "Create Setup From Used Tools"
Create Setup From Used Tools
*******************************
Dialog "Setup File" (IDD_SETUP_GRID)
*******************************
/4681 "Save"
Save
/4693 "Insert Row"
Insert Row
/4694 "Delete Row(s)"
Delete Row(s)
/30448 "Restore Default Order"
Restore Default Order
#Comments: Order => sequence
/31109 "Switch To Setup Layout"
Switch To Setup Layout
*******************************
Dialog "Tool Functions:" (IDD_TOOL_FUNCTIONS)
*******************************
/4020 "Tool Functions:"
Tool Functions:
/4021 "Before Tool:"
Before Tool:
/4023 "After Tool:"
After Tool:
/4026 "Before Every Punch With This Tool:"
Before Every Punch With This Tool:
/4028 "After Every Punch With This Tool:"
After eEvery Punch With This Tool:
/4030 "In Tool Change:"
In Tool Change:
*******************************
Dialog "Set Order" (IDD_SET_ORDER)
*******************************
/3810 "Set Order"
Set Order
#Comments: Order => sequence
/3813 "Done"
Done
*******************************
Dialog "Push Out" (IDD_PUSHOUT)
*******************************
/4080 "Push Out"
Push Out
/50003343 "Open"
Open
/4092 "Last Hit On Center"
Last Hit On Center
/4093 "Open Chute, Then Last Hit"
Open Chute, Then Last Hit
/4094 "Head Up"
Head Up
#Comments: Head => machine's turret
/3283 "Move"
Move
/3086 " dX :"
dX :
/3087 " dY :"
dY :
/4097 "Open Chute, Then Move"
Open Chute, Then Move
/4098 "Reduce Speed For Movement"
Reduce Speed For Movement
/4099 "Reduced Speed:"
Reduced Speed:
/4096 "User Define Movement"
User Define Movement
/4091 "Load From"
Load From
/4090 "Profiles"
Profiles
*******************************
Dialog "Crunch Path" (IDD_CRUNCH_PATH)
*******************************
/3225 "Crunch Path"
Crunch Path
#Comments: Path => The way in which the entity will be crunched
/3227 "Snake X"
Snake X
/3228 "Snake Y"
Snake Y
/3229 "Uni Direction X"
Uni Direction X
#Comments: Uni => one
/3230 "Uni Direction Y"
Uni Direction Y
*******************************
Dialog "Common Cuts" (IDD_COMMON_CUT)
*******************************
/3210 "Common Cuts"
Common Cuts
/3212 "Use Right"
Use Right
/3213 "Use Left"
Use Left
/3216 "Use Top"
Use Top
/3217 "Use Bottom"
Use Bottom
*******************************
Dialog "Add Dies" (IDD_DIALOG_DIES_LIST)
*******************************
/30238 "Add Dies"
Add Dies
/30239 "Clearance:"
Clearance:
*******************************
Dialog "Copy tool to tool libraries:" (IDD_DIALOG_COPY_TOOL_TO_LIB)
*******************************
/30394 "Copy tool to tool libraries:"
Copy tool to tool libraries:
/30391 "Select tool libraries to copy the tools to:"
Select tool libraries to copy the tools to:
*******************************
Dialog "Nibble" (IDD_DIALOG_PUNCH_NIBBLE)
*******************************
/30364 "Nibble"
Nibble
/3712 "Tool Positioning"
Tool Positioning
/3713 "Tool Spacing"
Tool Spacing
/30279 "Value:"
Value:
/30370 "Start:"
Start:
#Comments:
/30277 "End:"
End:
/3720 "Use Tool Data"
Use Tool Data
/30814 "Punch As Singles"
Punch As Singles
/3719 "Wheel Connect"
Wheel Connect
/30261 "Stop / Push Out"
Stop / Push Out
/30680 "Functions..."
Functions...
/30368 "D1:"
D1:
/30369 "D2:"
D2:
/30815 "Unload"
Unload
*******************************
Dialog "Grid" (IDD_DIALOG_PUNCH_GRID)
*******************************
/8216 "Grid"
Grid
/30265 "Grid Parameters"
Grid Parameters
/3727 "nX"
nX
/3728 "nY"
nY
/3729 "dX"
dX
/3730 "dY"
dY
/3072 "Step:"
Step:
*******************************
Dialog "nibble no offset type" (IDD_DIALOG_PUNCH_NIBBLE_NO_OFFS_TYPE)
*******************************
/30374 "nibble no offset type"
nibble no offset type
/30278 "Start:"
Start:
*******************************
Dialog "Crunch" (IDD_DIALOG_PUNCH_CRUNCH)
*******************************
*******************************
Dialog "Cut and Split Sheet" (IDD_CUT_SPLIT_SHEET_DIALOG)
*******************************
/30405 "Cut and Split Sheet"
Cut and Split Sheet
*******************************
Dialog "Turret" (IDD_DLG_TURRET_DISPLAY)
*******************************
/30542 "Turret"
Turret
/30683 "Add Tool"
Add Tool
/30684 "Fix Station:"
Fix Station:
#Comments: fix => lock, close
/30874 "Tools' List:"
Tools' List:
/30875 "Functions' List:"
Functions' List:
/31110 "Switch To Setup List"
Switch To Setup List
*******************************
Dialog "single" (IDD_DIALOG_PUNCH_SINGLE)
*******************************
/30371 "single"
single
/30393 "Single Type:"
Single Type:
/30527 "Distance Between Punches:"
Distance Between Punches:
/30528 "Number of Punches:"
Number of Punches:
#Comments: Number => quantity, amount
/30816 "Depth:"
Depth:
/30817 "Drill Parameters"
Drill Parameters
*******************************
Dialog "Rename Special Tool" (IDD_DIALOG_RENAME_SPEC_TOOL)
*******************************
/30876 "Rename Special Tool"
Rename Special Tool
/30877 "static"
static
*******************************
Dialog "Edit Turret:" (IDD_EDIT_TURRET_DIALOG)
*******************************
/30931 "Edit Turret:"
Edit Turret:
/30932 "Save"
Save
/30933 "Turret Description"
Turret Description
/30934 "Station Number"
Station Number
/30935 "Edit Station"
Edit Station
/30936 "Auto Index"
Auto Index
/30937 "90 Degrees Only"
90 Degrees Only
/30938 "Round Only"
Round Only
/30939 "Track"
Track
#Comments:
/30940 "Multi-tool"
Multi-tool
*******************************
Dialog "Used tools List" (IDD_USEDTOOLS)
*******************************
/6030 "Used tools List"
Used tools List
*******************************
Dialog "Insert Pattern" (IDD_PATTERN)
*******************************
/6000 "Insert Pattern"
Insert Pattern
/6001 "Enter Gcode:"
Enter Gcode:
*******************************
Dialog "Simulation Preview" (IDD_PRNT_CHOICE)
*******************************
/6020 "Simulation Preview"
Simulation Preview
/6022 "Graphics Preview"
Graphics Preview
/6023 "NC (Text) Preview"
NC (Text) Preview
/6021 "Select Preview"
Select Preview
/469 "Tool = "
Tool =
/476 "Line = "
Line =
#Comments: Row
/477 "Stop = "
Stop =
/484 "Clamp = "
Clamp =
/488 "OBS = "
OBS =
/4137 "Program"
Program
/15117 "Line:"
Line:
#Comments: Row
/15118 "Station:"
Station:
/443 "Run F9"
Run F9
/454 "Pause F8"
Pause F8
/465 "Quit Run F10"
Quit Run F10
/6042 "Job-Time:"
Job-Time:
/6040 "Slow"
Slow
/6041 "Fast"
Fast
/31242 "Close, Do Not Update"
Close, Do Not Update
*******************************
Dialog "Simulator Settings" (IDD_SIM_SETTINGS)
*******************************
/31243 "Check turret changes when opening an NC file"
Check turret changes when opening an NC file
*******************************
Dialog "ToolBars" (IDD_TOOLBARS_DLG)
*******************************
/3860 "ToolBars"
ToolBars
/3861 "ToolBars"
ToolBars
/3862 "Standard"
Standard
/3865 "Edit"
Edit
/3863 "Zoom"
Zoom
/3872 "Graph"
Graph
*******************************
END Dialog Section
*******************************
*******************************
START String Section
*******************************
/30562 "This line is not horizontal"
This line is not horizontal
#Comments:Line => long, thin mark
/30563 "This line is not vertical"
This line is not vertical
#Comments:Line => long, thin mark
/30564 "This is not an outer contour"
This is not an outer contour
/30565 "This is not an inner contour"
This is not an inner contour
/30566 "This hole is too small"
This hole is too small
/30567 "The hole diameter must be greater or equal to"
The hole diameter must be greater or equal to
/30568 "Selected entity is in the Cat-Eye dead zone"
Selected entity is in the Cat-Eye dead zone
/30720 "TEXT SIZE UPDATE: Select text"
TEXT SIZE UPDATE: Select text
/30104 "Move Support:"
Move Support:
/30105 "Select a cut to move support before"
Select a cut to move support before
/30106 "Select side to move support"
Select side to move support
/30721 "Explode Intersection"
Explode Intersection
#Comments: Explode => Divide, split, break to pieces
/30722 "Select Intersection"
Select Intersection
/30005 "Delete Intersection"
Delete Intersection
/31111 "Factor"
Factor
/30052 "OLE initialization failed. Make sure that the OLE libraries are the corr
ect version."
OLE initialization failed. Make sure that the OLE libraries are the correct vers
ion.
/431 "For Help, press F1"
For Help, press F1
/30053 "Select an object on which to get Help"
Select an object on which to get Help
/337 "EXT"
EXT
/30054 "CAP"
CAP
/30055 "SCRL"
SCRL
/30056 "OVR"
OVR
/30057 "REC"
REC
/50011239 "Create a new document\nNew"
Create a new document\nNew
/50011240 "Open an existing document\nOpen"
Open an existing document\nOpen
/50011241 "Close the active document\nClose"
Close the active document\nClose
/50011242 "Save the active document\nSave"
Save the active document\nSave
/50011243 "Save the active document with a new name\nSave As"
Save the active document with a new name\nSave As
/50011244 "Change the printing options\nPage Setup"
Change the printing options\nPage Setup
/50011245 "Change the printer and printing options\nPrint Setup"
Change the printer and printing options\nPrint Setup
/50011246 "Print the active document\nPrint"
Print the active document\nPrint
/50011247 "Print Preview\nPrint Preview"
Print Preview\nPrint Preview
/50011262 "Display program information, version number and copyright\nAbout"
Display program information, version number and copyright\nAbout
/50011263 "Quit the application; prompts to save documents\nExit"
Quit the application; prompts to save documents\nExit
/50011264 "Opens Help\nHelp Topics"
Opens Help\nHelp Topics
/50011265 "List Help topics\nHelp Topics"
List Help topics\nHelp Topics
/50011266 "Display instructions about how to use help\nHelp"
Display instructions about how to use help\nHelp
/50011267 "Display help for clicked buttons, menus and windows\nHelp"
Display help for clicked buttons, menus and windows\nHelp
/50011268 "Display help for current task or command\nHelp"
Display help for current task or command\nHelp
/50011248 "Open this document"
Open this document
/50011269 "Switch to the next window pane\nNext Pane"
Switch to the next window pane\nNext Pane
/50011270 "Switch back to the previous window pane\nPrevious Pane"
Switch back to the previous window pane\nPrevious Pane
/50008021 "Split the active window into panes\nSplit"
Split the active window into panes\nSplit
/50011250 "Erase the selection\nErase"
Erase the selection\nErase
/50011251 "Erase everything\nErase All"
Erase everything\nErase All
/50011252 "Copy the selection and put it on the Clipboard\nCopy"
Copy the selection and put it on the Clipboard\nCopy
/50011253 "Cut the selection and put it on the Clipboard\nCut"
Cut the selection and put it on the Clipboard\nCut
/50011254 "Find the specified text\nFind"
Find the specified text\nFind
/50011255 "Insert Clipboard contents\nPaste"
Insert Clipboard contents\nPaste
/50011256 "Repeat the last action\nRepeat"
Repeat the last action\nRepeat
/50011257 "Replace specific text with different text\nReplace"
Replace specific text with different text\nReplace
/50011258 "Select the entire document\nSelect All"
Select the entire document\nSelect All
/50011259 "Undo the last action\nUndo"
Undo the last action\nUndo
/50011260 "Redo the previously undone action\nRedo"
Redo the previously undone action\nRedo
/50011281 "Job Time"
Job Time
/30058 "Set Plane Cut"
Set Plane Cut
/30059 "Only Punch Tool allowed"
Only Punch Tool allowed
/30060 "Select Array to Split"
Select Array to Split
/30061 "No array selected"
No array selected
/30062 "+/-=Rotate CCW/CW"
+/-=Rotate CCW/CW
/30063 "Choose a New Tool"
Choose a New Tool
/30064 "Do not ask this question again"
Do not ask this question again
/30477 "Close print preview mode\nCancel Preview"
Close print preview mode\nCancel Preview
/50011232 "Send File\nSend"
Send File\nSend
/50011233 "Stop operation\nStop"
Stop operation\nStop
/50011234 "Receive File\nReceive"
Receive File\nReceive
/50011235 "Create job list\nJob list"
Create job list\nJob list
/31027 "Local Machines Folder Is Updating. Please Wait..."
Local Machines Folder Is Updating. Please Wait...
/31028 "Master Machines Folder Is Updating. Please Wait..."
Master Machines Folder Is Updating. Please Wait...
/31029 "Master machines directory was recently updated."
Master machines directory was recently updated.
/31030 "Price/Hour"
Price/Hour
/30614 "All speeds are defined"
All speeds are defined
/30755 "To have different %s Parameters, first press "Copy %s Parameters" button
"
To have different %s Parameters, first press "Copy %s Parameters" button
/30843 "Only Demo File can be Loaded"
Only Demo File can be Loaded
/30844 "One or more materials still don't have a conversion. New material list c
an't be used."
One or more materials still don't have a conversion. New material list can't be
used.
/30845 "Cutting table for new material list already exists. Are you sure you wan
t override the existing rows?"
Cutting table for new material list already exists. Are you sure you want overri
de the existing rows?
/30846 "New material list cannot be used because cutting table was not converted
"
New material list cannot be used because cutting table was not converted
/30847 "Cutting table was not converted because no row was created"
Cutting table was not converted because no row was created
/30848 "You can always edit the materials conversion table by pressing "Convert
Materials" button in the Materials tab (Settings -> Workspace settings)."
You can always edit the materials conversion table by pressing "Convert Material
s" button in the Materials tab (Settings -> Workspace settings).
/30849 "Old Material"
Old Material
/4707 "New Material"
New Material
/30468 "Snap to intersection point between two entities"
Snap to intersection point between two entities
/30478 "Snap to end point of the entity"
Snap to end point of the entity
/30469 "Snap to center point of the entity"
Snap to center point of the entity
/30470 "Auto Snap"
Auto Snap
/30474 "No snap"
No snap
/30471 "Snap to perpendicular intersection point between two entities"
Snap to perpendicular intersection point between two entities
/30472 "Snap to tangent between line and arc or circle"
Snap to tangent between line and arc or circle
#Comments:Line => long, thin mark
/258 "Snap to nearest entity point"
Snap to nearest entity point
/260 "Snap to apparent intersection of two entities"
Snap to apparent intersection of two entities
/30473 "Snap to part"
Snap to part
/31182 "Do you want to send the report now"
Do you want to send the report now
/30484 "cncKad Alert"
cncKad Alert
#Comments: Alert message from cncKad to you
/30457 "Reproduce"
Reproduce
/30276 "Crash"
Crash
/31183 "Incorrect Functionality"
Incorrect Functionality
/31184 "Sometimes"
Sometimes
/31185 "Rarely"
Rarely
/31186 "I Didn't Try"
I Didn't Try
/31187 "Summary"
Summary
/31188 "Cosmetic"
Cosmetic
/30290 "Create Only"
Create Only
/30615 "NC Report Template"
NC Report Template
/30616 "Part Report Template"
Part Report Template
/30222 "CAD Link Options"
CAD Link Options
/30543 "Common or Connected Cuts!\nTo change current ordering delete cuts and re
run AutoCut."
Common or Connected Cuts!\nTo change current ordering delete cuts and rerun Auto
Cut.
/30544 "\nMultiParts order can be controlled."
\nMultiParts order can be controlled.
#Comments: Order => arrangement
/30545 "You cannot change this settings as long as\nCommon Cuts or Connected Cut
s exist."
You cannot change this settings as long as\nCommon Cuts or Connected Cuts exist.
/30546 "Cutting Optimization Alert"
Cutting Optimization Alert
/4421 "Cutting"
Cutting
/30617 "Geometry"
Geometry
/30618 "Vaporize"
Vaporize
/15143 "Small"
Small
/15145 "Large"
Large
/30621 "Copy %s '%s' to:"
Copy %s '%s' to:
/30622 "Please select one of the lasers."
Please select one of the lasers.
/30623 "All contour sizes are defined"
All contour sizes are defined
/30696 "The destination already exists.\nCopy operation will overwrite it.\nCont
inue?"
The destination already exists.\nCopy operation will overwrite it.\nContinue?
/30625 "The material: %s was converted to:\nMaterial: %s\nGas: %s\nHead: %s\nLen
s: %s\nfor the following thicknesses:\n"
The material: %s was converted to:\nMaterial: %s\nGas: %s\nHead: %s\nLens: %s\nf
or the following thicknesses:\n
/30626 "%s table is missing."
%s table is missing.
#Comments: Table => chart
/30627 "Current machine was not changed."
Current machine was not changed.
/30628 "cncKad cannot be started."
cncKad cannot be started.
/30629 "AutoNest cannot be started."
AutNest cannot be started.
/30630 "Delete row(s)?"
Delete row(s)?
/30631 "Overwrite existing rows?"
Overwrite existing rows?
/30632 "In %s contour size: %s value is equal or greater than %s value."
In %s contour size: %s value is equal or greater than %s value.
/30633 "In %s contour size: %s value is equal or greater than prev %s value."
In %s contour size: %s value is equal or greater than prev %s value.
#Comments: prev => previous
/30634 "Deposit selected parts is not allowed (you may not have any unloading de
finitions or more than one definition per part)"
Deposit selected parts is not allowed (you may not have any unloading definition
s or more than one definition per part)
/30697 "This is last row(s)"
This is last row(s)
/30698 "This is last material"
This is last material
/30699 "This is last thickness"
This is last thickness
/30700 "This is last gas"
This is last gas
/30701 "This is last head"
This is last head
/30702 "This is last lens"
This is last lens
/3610 "NONE"
NONE
/30748 "The current model doesn't support cutting technology"
The current model doesn't support cutting technology
/30749 "Multi Head"
Multi Head
/30747 "Using %s Parameters from: %s - %s, %s - %s, %s - %s, %s - %s, %s - %s"
Using %s Parameters from: %s - %s, %s - %s, %s - %s, %s - %s, %s - %s
/30708 "Table"
Table
#Comments: NOT a chart
/30750 "Machines directory was changed and the old machines files are stored in
the %s file."
Machines directory was changed and the old machines files are stored in the %s f
ile
/30743 "Step 3 of 4 - Reduced problem report"
Step 3 of 4 - Reduced problem report
/30744 "Step 1 of 4 - Problem Description"
Step 1 of 4 - Problem Description
/30745 "Step 2 of 4 - Personal Data"
Step 2 of 4 - Personal Data
/30746 "Step 4 of 4 - Instruction"
Step 4 of 4 - Instruction
/30079 "Choose stored original metalix.ini file:"
Choose stored original metalix.ini file:
/30080 "INI Files (*.ini)"
INI Files (*.ini)
/4140 "Select the Snap type when clicking the mouse\nSnap Type"
Select the Snap type when clicking the mouse\nSnap Type
/4141 "Toggle punch side state\nToggle punch side"
Toggle punch side state\nToggle punch side
/4142 "Toggle the index state\nToggle Index"
Toggle the index state\nToggle Index
/4144 "Toggle between CAM to CAD state\nToggle CAM / CAD state"
Toggle between CAM to CAD state\nToggle CAM / CAD state
/4154 "Select the drawing color to the next Entities\nSelect Color"
Select the drawing color to the next Entities\nSelect Color
/4155 "Select the drawing line style to the next Entities\nSelect Line Style"
Select the drawing line style to the next Entities\nSelect Line Style
#Comments: Line => long, thin mark
/4147 "Toggle Proc Show state\nToggle Proc Show"
Toggle Proc Show state\nToggle Proc Show
#Comments: Proc => shortcut of "Processing"
/30009 "Toggle Dims Show state\nToggle Dims Show"
Toggle Dims Show state\nToggle Dims Show
#Comments: Dims => shortcut of "dimensions"
/30752 "Cannot copy a problem report file."
Cannot copy a problem report file.
/30753 "A problem report file was copied successfully."
A problem report file was copied successfully.
/30751 "Do you wish to change current machine to %s?"
Do you wish to change current machine to %s?
/30824 ""Only simple entities can be edited. Explode intersection first.""
"Only simple entities can be edited. Explode intersection first."
#Comments: Explode => Divide, split, break to pieces
/30754 "Multi Step Milling"
Multi Step Milling
/30756 "Copy %s Parameters"
Copy %s Parameters
/31032 "Are you sure you want to update master machines directory?\n(Please make
sure all cncKad stations are closed)"
Are you sure you want to update master machines directory?\n(Please make sure al
l cncKad stations are closed)
/31033 "Master Machines Directory Was Successfully Updated."
Master Machines Directory Was Successfully Updated.
/31034 "Are you sure you want to update local machines directory?"
Are you sure you want to update local machines directory?
/31035 "Local Machines Directory Was Successfully Updated."
Local Machines Directory Was Successfully Updated.
/30850 "The laser table was successfully converted"
The laser table was successfully converted
/30852 "Number of contour sizes is greater than number of cutting speeds.\nUnexp
ected results may occur."
Number of contour sizes is greater than number of cutting speeds.\nUnexpected re
sults may occur.
/30854 "The material with same name already exists"
The material with same name already exists
/30855 "Use for\nconversion"
Use for\nconversion
/30856 "Converting laser table. Please wait..."
Converting laser table. Please wait...
/350 "Rotation 90°"
Rotation 90°
/351 "Rotation 180°"
Rotation 180°
/352 "Rotation 270°"
Rotation 270°
/353 "Horizontal Flip"
Horizontal Flip
/354 "Vertical Flip"
Vertical Flip
/30906 "Add Measure Cycle"
Add Measure Cycle
/30025 "Orange color = Changed entities, Dark yellow color= Deleted entities, Es
c to continue"
Orange color = Changed entities, Dark yellow color= Deleted entities, Esc to con
tinue
/30026 "Failed building contours. Operation aborted"
Failed building contours. Operation aborted
/30027 "Offset + flange width is bigger than the original sheet width. This type
of operation is not supported yet."
Offset + flange width is bigger than the original sheet width. This type of oper
ation is not supported yet.
/30029 "Cannot create picture - size too small"
Cannot create picture - size too small
/30153 "All contours have been processed.\nNote: some contours may only be parti
ally processed"
All contours have been processed.\nNote: some contours may only be partially pro
cessed
/30031 "Add Cut"
Add Cut
/30119 "The filename contains blank characters. They will be replaced with '_'.
The New filename is:"
The filename contains blank characters. They will be replaced with '_'. The New
filename is:
/30154 "Open contour(s) found. See marked."
Open contour(s) found. See marked.
/30155 "contour(s) found without any process."
contour(s) found without any process.
/30158 "Do you wish to mark them?"
Do you wish to mark them?
/30231 "%s Execution stopped"
%s Execution stopped
#Comments: Execution => Performing, carrying out
/30160 "Move Part"
Move Part
/30159 "Copy Part"
Copy Part
/30232 "V=Toggle Orthogonal Mode"
V=Toggle Orthogonal Mode
/30295 "ON"
ON
/30862 "Hold Ctrl to set positioning"
Hold Ctrl to set positioning
/30530 "POSITIONING:"
POSITIONING:
/31057 "OLE initialization failed. Make sure that the OLE libraries are the corr
ect version."
OLE initialization failed. Make sure that the OLE libraries are the correct vers
ion.
/356 "Cannot start server --<SimW.Document>"
Cannot start server --<SimW.Document>
/360 "Sheet Reposition"
Sheet Reposition
/30654 "Set Program Origin by pointing on new Origin"
Set Program Origin by pointing on new Origin
#Comments: Origin => starting point
/15157 "Technology"
Technology
/30907 "Measure Cycle"
Measure Cycle
#Comments: A cycle to measure with
/30032 "Value not in range"
Value not in range
/31058 "Define Supports Movement"
Define Supports Movement
/1155 "Connect two Cuts into one continuous Cut (one pierce)\nConnect Cuts"
Connect two Cuts into one continuous Cut (one pierce)\nConnect Cuts
/1156 "Disconnect Connected Cut into two separate Cuts (two pierces)\nDisconnect
Cut"
Disconnect Connected Cut into two separate Cuts (two pierces)\nDisconnect Cut
/1034 "In CAD: Delete the Last Entity, Dim or Help-Line. In CAM, Delete the last
Punch or Cut.\nDelete Last"
In CAD: Delete the Last Entity, Dim or Help-Line. In CAM, Delete the last Punch
or Cut.\nDelete Last
/1032 "Undo the last operation\nUndo"
Undo the last operation\nUndo
/357 "shape list\nshape list"
shape list\nshape list
/1203 "Create a Special Tool from the current Drawing."
Create a Special Tool from the current Drawing.
/1116 "Add Dimensions or text\nAdd Dimensions or text"
Add Dimensions or text\nAdd Dimensions or text
/358 "Edit Dim Text\nEdit Dim Text"
Edit Dim Text\nEdit Dim Text
#Comments: Dim => shortcut of "dimension"
/359 "Global Update Dimensions\nGlobal Update Dimensions"
Global Update Dimensions\nGlobal Update Dimensions
/1016 "Print the Part, the Sheet, or the Report File"
Print the Part, the Sheet, or the Report File
/1014 "Import CAD file...\nImport"
Import CAD file...\nImport
/1008 "Insert a Part: will be merged with Current Part\nInsert Sub-Part"
Insert a Part: will be merged with Current Part\nInsert Sub-Part
/1009 "Create a New Part from selected Entities\nSave Sub-Part"
Create a New Part from selected Entities\nSave Sub-Part
/1012 "Send NC to Machine (DNC)\nSend to Machine (DNC)"
Send NC to Machine (DNC)\nSend to Machine (DNC)
/1184 "Move a Selected Part to a new place\nMove Selected Part"
Move a Selected Part to a new place\nMove Selected Part
/30081 "ACTIVE"
ACTIVE
/30082 "MODE"
MODE
/30083 "BATCH"
BATCH
#Comments: These 3 messages build a sentence: "BATCH MODE ACTIVE".The last one b
ecomes first.So translate accordingly.
/1023 "Opens the AutoNest application\nOpen AutoNest"
Opens the AutoNest application\nOpen AutoNest
/15038 "Set Sequence of a tool by selecting CAMs\nSet Tool Sequence"
Set Sequence of a tool by selecting CAMs\nSet Tool Sequence
/30084 "Add Milling Pocket\nPocket"
Add Milling Pocket\nPocket
#Comments: Pocket => dip downward
/1076 "Toggle Rapid Tool Path On/Off"
Toggle Rapid Tool Path On/Off
#Comments: Path => The way the tool makes moving from one place to another
/1145 "Create an Array of Selected Part\nPart Array"
Create an Array of Selected Part\nPart Array
/364 "Run Parametric File\nRun Parametric file"
Run Parametric File\nRun Parametric file
/365 "Open Order file\nOpen Order file"
Open Order file\nOpen Order file
#Comments: Order => request
/4834 "Go\tF5"
Go\tF5
/4837 "Run to Cursor"
Run to Cursor
/30156 "Run AutoCut Wizard\nAutoCut"
Run AutoCut Wizard\nAutoCut
/30163 "Moves a whole part"
Moves a whole part
/30164 "Copies a whole part"
Copies a whole part
/30490 "Toggle between center line and full width display mode\nFill tool"
Toggle between center line and full width display mode\nFill tool
#Comments: Line => long, thin mark
/30491 "Toggle multi colored tools\nTools Color"
Toggle multi colored tools\nTools Color
/30492 "Fill tools with color\nFill tools"
Fill tools with color\nFill tools
/30650 "Show dead zones for close to clamp tools"
Show dead zones for close to clamp tools
/1002 "Create a New Part\nNew Part"
Create a New Part\nNew Part
/1004 "Open an existing Part\nOpen Part"
Open an existing Part\nOpen Part
/1006 "Save the Current Part/Nest\nSave"
Save the Current Part/Nest\nSave
/1007 "Save the Current Part/Nest under a new name"
Save the Current Part/Nest under a new name
/1018 "Change the printer and printing options\nPrint Setup"
Change the printer and printing options\nPrint Setup
/343 "Print Preview\nPrint Preview"
Print Preview\nPrint Preview
/30485 "Send the active document by e-mail\nSend Mail"
Send the active document by e-mail\nSend Mail
/1222 "Display program information, version number and copyright\nAbout"
Display program information, version number and copyright\nAbout
/1021 "Quit cncKad2006; you will be prompted to Save if needed"
Quit cncKad2006; you will be prompted to Save if needed
/344 "Opens Help\nHelp Topics"
Opens Help\nHelp Topics
/1221 "List Help Topics"
List Help Topics
/30197 "Display instructions about how to use help\nHelp"
Display instructions about how to use help\nHelp
/1224 "Display help for clicked buttons, menus and windows\nHelp"
Display help for clicked buttons, menus and windows\nHelp
/30129 "Display help for current task or command\nHelp"
Display help for current task or command\nHelp
/1020 "Open this File"
Open this File
/31059 "Delete All Supports Movement"
Delete All Supports Movement
/30529 "Punch should contain at least two hits"
Punch should contain at least two hits
/32 "Undo"
Undo
/33 "&Redo"
&Redo
/30076 "Cannot perform fillet"
Cannot perform fillet
/31068 "Edit Pierce"
Edit Pierce
/31069 "SELECT BEND LINES"
SELECT BEND LINES
/1063 "Toggle Status Bar position between top and bottom \nStatus Bar On Top"
Toggle Status Bar position between top and bottom \nStatus Bar On Top
/1033 "Redo the last undone operation\nRedo"
Redo the last undone operation\nRedo
/1035 "Insert Clipboard Contents\nPaste"
Insert Clipboard Contents\nPaste
/345 "Redo the previously undone action\nRedo"
Redo the previously undone action\nRedo
/346 "Toolbars Dialog\nToggle ToolBar"
Toolbars Dialog\nToggle ToolBar
/1062 "Show or hide the status bar"
Show or hide the status bar
/347 "Reposition By User, Auto Head Position"
Reposition By User, Auto Head Position
/3329 "Reposition And Head Position By User"
Reposition And Head Position By User
/349 "Reposition By Post-Processor, Head Position By User"
Reposition By Post-Processor, Head Position By User
/30910 "Reset Centre of Tube Axis"
Reset Centre of Tube Axis
/30911 "You cannot remove master turret"
You cannot remove master turret
/30912 "Delete Turret?"
Delete Turret?
/31060 "SAVE PREDEFINED SHAPE: "
SAVE PREDEFINED SHAPE:
/31061 "Invalid Selection"
Invalid Selection
/30605 "Part Instance Properties"
Part Instance Properties
/3820 "Station Settings"
Station Settings
/1201 "Select a Tool from the library ( TOOL.LIB), or type any Tool you wish"
Select a Tool from the library ( TOOL.LIB), or type any Tool you wish
/15007 "Select a Punch for which to Set/Clear Last-Hit-On-Center\nSet Last-Hit-O
n-Center"
Select a Punch for which to Set/Clear Last-Hit-On-Center\nSet Last-Hit-On-Center
/15009 "Attach a new specific offset to all entities with the old specified offs
et"
Attach a new specific offset to all entities with the old specified offset
/15013 "Change the contour's cut entry point according to the next cut"
Change the contour's cut entry point according to the next cut
/1053 "Change the entities' attribute, Color and Line Style\nChange Attribute"
Change the entities' attribute, Color and Line Style\nChange Attribute
#Comments: Line => long, thin mark
/1144 "Smooths chain of entities using arcs\nSmooth Entities"
Smooths chain of entities using arcs\nSmooth Entities
/15016 "Add Shear\nAdd Shear"
Add Shear\nAdd Shear
/15023 "Add DFT Text\nAdd DFT Text"
Add DFT Text\nAdd DFT Text
/15022 "Split nibble and create microjoint\nAdd MicroJoint"
Split nibble and create microjoint\nAdd MicroJoint
/15024 "Create new DFT font\nCreate new font"
Create new DFT font\nCreate new font
/15025 "Edit characters of DFT font\nEdit fonts"
Edit characters of DFT font\nEdit fonts
/1003 "Create a New Nest\nNew Nest"
Create a New Nest\nNew Nest
/1005 "Open an existing Nest\nOpen Nest"
Open an existing Nest\nOpen Nest
/1010 "Create a Machine (NC) Program,Ctrl = Quick NC\nCreate a Machine (NC) Prog
ram"
Create a Machine (NC) Program,Ctrl = Quick NC\nCreate a Machine (NC) Program
/1036 "Delete Lines,Circles,Arcs,Point\nDelete Entities"
Delete Lines,Circles,Arcs,Point\nDelete Entities
/1037 "Delete CAMs (Punches and Cuts)\nDelete Punch/Cut"
Delete CAMs (Punches and Cuts)\nDelete Punch/Cut
/1038 "Delete Dimensions\nDelete Dimensions"
Delete Dimensions\nDelete Dimensions
/1040 "Split an Entity into two Entities at a specified position\nSplit"
Split an Entity into two Entities at a specified position\nSplit
/1041 "Join two co-linear Lines to one Line, two co-centered Arcs to one Arc\nJo
in"
Join two co-linear Lines to one Line, two co-centered Arcs to one Arc\nJoin
#Comments: Line => long, thin mark
/1044 "Fillet (Round) a Corner by a Radius\nFillet (Round) Corner"
Fillet (Round) a Corner by a Radius\nFillet (Round) Corner
/1042 "Chamfer two Entities at specified Distances\nChamfer"
Chamfer two Entities at specified Distances\nChamfer
/1049 "Place Notch on a Part\nNotch"
Place Notch on a Part\nNotch
/1064 "Redraw the Graphics Screen\nRedraw"
Redraw the Graphics Screen\nRedraw
/1065 "Display the entire Part\nZoom Part"
Display the entire Part\nZoom Part
/1066 "Display the entire Sheet\nZoom Sheet"
Display the entire Sheet\nZoom Sheet
/1067 "Zoom by use of a Window\nZoom Window"
Zoom by use of a Window\nZoom Window
/1068 "Enlarge the Display\nZoom In"
Enlarge the Display\nZoom In
/1072 "Toggle between CAM Mode and CAD Mode"
Toggle between CAM Mode and CAD Mode
/1069 "Make the Display smaller\nZoom Out"
Make the Display smaller\nZoom Out
/1132 "Move selected Entities to a specified Point\nMove selected Entities"
Move selected Entities to a specified Point\nMove selected Entities
/1133 "Move selected Entities by dX, dY"
Move selected Entities by dX, dY
/1135 "Copy selected Entities to a specified Point\nCopy Entities"
Copy selected Entities to a specified Point\nCopy Entities
/1136 "Copy selected Entities by dX, dY"
Copy selected Entities by dX, dY
/1137 "Rotate selected Entities around a specified Center\nRotate Entities"
Rotate selected Entities around a specified Center\nRotate Entities
/1138 "Mirror selected Entities about a defined axis\nMirror Entities"
Mirror selected Entities about a defined axis\nMirror Entities
/1139 "Stretch selected Entities by dX, dY\nStretch Entities "
Stretch selected Entities by dX, dY\nStretch Entities
/1140 "Change the Scale of selected Entities\nScale"
Change the Scale of selected Entities\nScale
/1141 "Create an Array of selected Entities\nArray"
Create an Array of selected Entities\nArray
/1162 "Create Common Cuts\nCreate Common Cuts"
Create Common Cuts\nCreate Common Cuts
/1183 "Delete a Part that has been placed in the Nesting\nDelete Part"
Delete a Part that has been placed in the Nesting\nDelete Part
/1182 "Pick a Part that has been placed, and Copy it to a new place.\nPick + Pla
ce"
Pick a Part that has been placed, and Copy it to a new place.\nPick + Place
/1181 "Load and Place a New Part on the Nesting\nLoad + Place"
Load and Place a New Part on the Nesting\nLoad + Place
/1185 "Create an array of a Selected Part\nCreate Array"
Create an array of a Selected Part\nCreate Array
/1186 "Display Part Files and quantities"
Display Part Files and quantities
/1187 "Set the Order of Processing of the Parts "
Set the Order of Processing of the Parts
#Comments: Order => sequence
/1202 "List the Tools used for the Current Part, set Tool Path, Change Tools and
more.\nUsed Tools"
List the Tools used for the Current Part, set Tool Path, Change Tools and more.\
nUsed Tools
#Comments: Path => Track to tools' directory
/1081 "Draw Line using Auto-Snap\nLine, Auto-Snap"
Draw Line using Auto-Snap\nLine, Auto-Snap
#Comments: Line => long, thin mark
/1082 "Draw a Line Tangent to two Arcs/Circles"
Draw a Line Tangent to two Arcs/Circles
#Comments: Line => long, thin mark
/1094 "Draw Arc using 2 Points and Radius\nDraw Arc using 2 Points and Radius"
Draw Arc using 2 Points and Radius\nDraw Arc using 2 Points and Radius
/1095 "Draw Arc using Center Point, the Radius and 2 Angles\nDraw Arc using Cent
er Point, the Radius and 2 Angles"
Draw Arc using Center Point, the Radius and 2 Angles\nDraw Arc using Center Poin
t, the Radius and 2 Angles
/1096 "Draw Arc using 2 Points and the Arc Angle\nDraw Arc using 2 Points and th
e Arc Angle"
Draw Arc using 2 Points and the Arc Angle\nDraw Arc using 2 Points and the Arc A
ngle
/1097 "Draw Arc using Point, Center and Included Angle\nDraw Arc using Point, Ce
nter and Included Angle"
Draw Arc using Point, Center and Included Angle\nDraw Arc using Point, Center an
d Included Angle
/1098 "Draw Arc using 3 Points\nDraw Arc using 3 Points"
Draw Arc using 3 Points\nDraw Arc using 3 Points
/1099 "Draw Arc using 2 Tangent Points and the Radius\nDraw Arc using 2 Tangent
Points and the Radius"
Draw Arc using 2 Tangent Points and the Radius\nDraw Arc using 2 Tangent Points
and the Radius
/1100 "Draw a Point\nPoint"
Draw a Point\nPoint
/1101 "Draw Circle\nDraw Circle"
Draw Circle\nDraw Circle
/1103 "Draw Rectangle shape\nDraw Rectangle"
Draw Rectangle shape\nDraw Rectangle
/1104 "Draw Oval shape\nDraw Oval"
Draw Oval shape\nDraw Oval
/1105 "Draw Single-D\nDraw Single-D"
Draw Single-D\nDraw Single-D
/1106 "Draw Double-D Shape\nDraw Double-D"
Draw Double-D Shape\nDraw Double-D
/1107 "Draw Trapeze (Connector) Shape\nTrapeze"
Draw Trapeze (Connector) Shape\nTrapeze
/1108 "Draw Bolt-Hole Shape\nDraw Bolt-Hole"
Draw Bolt-Hole Shape\nDraw Bolt-Hole
/1109 "Draw Banana Shape\nBanana"
Draw Banana Shape\nBanana
/1120 "Draw Ellipse shape\nDraw Elipse"
Draw Ellipse shape\nDraw Elipse
/1121 "Draw Polygon\nDraw Polygon"
Draw Polygon\nDraw Polygon
/1087 "Draw Help-Line perpendicular to existing Line through Point\nPerpendicula
r Help-Line"
Draw Help-Line perpendicular to existing Line through Point\nPerpendicular Help-
Line
/15138 "Draw Triangle\nDraw Triangle"
Draw Triangle\nDraw Triangle
/1091 "Draw vertical Help-Line\nVertical Help-Line"
Draw vertical Help-Line\nVertical Help-Line
/1092 "Draw horizontal Help-Line\nHorizontal Help-Line"
Draw horizontal Help-Line\nHorizontal Help-Line
/1090 "Draw Help-Line through two Points\nTwo Points Help-Line"
Draw Help-Line through two Points\nTwo Points Help-Line
/1085 "Draw Help-Line Parallel to existing Line by Distance\nParallel Help-Line
by Distance"
Draw Help-Line Parallel to existing Line by Distance\nParallel Help-Line by Dist
ance
/1086 "Draw Help-Line Parallel to existing Line through Point\nParallel Help-Lin
e through Point"
Draw Help-Line Parallel to existing Line through Point\nParallel Help-Line throu
gh Point
/1089 "Draw Help-Line by Relative Angle to existing Line through Point\nHelp-Lin
e By Relative Angle"
Draw Help-Line by Relative Angle to existing Line through Point\nHelp-Line By Re
lative Angle
/1088 "Draw Help-Line at Absolute Angle through Point\nHelp-Line By Absolute Ang
le"
Draw Help-Line at Absolute Angle through Point\nHelp-Line By Absolute Angle
/1039 "Delete Help-Lines\nDelete Help-Lines"
Delete Help-Lines\nDelete Help-Lines
/1047 "Trim an Entity between Intersections\nTrim"
Trim an Entity between Intersections\nTrim
/1048 "Extend an Entity up to an Entity or Help-Line\nExtend"
Extend an Entity up to an Entity or Help-Line\nExtend
/1045 "Fillet (Round) ALL Corners of a Contour by the same Radius\nFillet (Round
) Corner"
Fillet (Round) ALL Corners of a Contour by the same Radius\nFillet (Round) Corne
r
/1046 "Fillet (Round) All Corners in the Part\nFillet (Round) Part"
Fillet (Round) All Corners in the Part\nFillet (Round) Part
/1113 "Parallel by Distance\nParallel by Distance"
Parallel by Distance\nParallel by Distance
/1114 "Draw parallel through point\nDraw parallel through point"
Draw parallel through point\nDraw parallel through point
/1051 "Measure Distances and Angles from Base point\nMeasure from Base point"
Measure Distances and Angles from Base point\nMeasure from Base point
/1052 "Measure Distances and Angles from Point to Point\nMeasure"
Measure Distances and Angles from Point to Point\nMeasure
/1070 "Get information about Entity and CAM\nAsk"
Get information about Entity and CAM\nAsk
/1083 "Draw a Line Tangent to an Arc/Circle and perpendicular to a Line"
Draw a Line Tangent to an Arc/Circle and perpendicular to a Line
#Comments: Line => long, thin mark
/1152 "Add Cut (Laser\Plasma\Flame)\nAdd Cut"
Add Cut (Laser\Plasma\Flame)\nAdd Cut
/1169 "Add a Push Out (Chute) command following a selected Punch/Cut"
Add a Push Out (Chute) command following a selected Punch/Cut
/1170 "Add/Remove a Stop Machine command following a selected Punch/Cut"
Add/Remove a Stop Machine command following a selected Punch/Cut
/1191 "Engrave text\nEngrave text"
Engrave text\nEngrave text
/1168 "Define Reposition. Normally, do NOT use this command, but let the Post-Pr
ocessor do it Automatically\nReposition and Transformation"
Define Reposition. Normally, do NOT use this command, but let the Post-Processor
do it Automatically\nReposition and Transformation
/1173 "Add CAM Functions"
Add CAM Functions
/1175 "Add Program Functions"
Add Program Functions
/1160 "Add Punch\nAdd Punch"
Add Punch\nAdd Punch
/1161 "AutoPunch\nAutoPunch"
AutoPunch\nAutoPunch
/1190 "Edit contour entry\nEdit contour entry"
Edit contour entry\nEdit contour entry
/1164 "Set a Punch as Uni-Directional\nSet Uni-Directional"
Set a Punch as Uni-Directional\nSet Uni-Directional
#Comments: Uni => one
/1165 "Reset a Punch to Standard (Bi-Directional). Direction will be Optimized\n
Reset to Bi-Directional"
Reset a Punch to Standard (Bi-Directional). Direction will be Optimized\nReset t
o Bi-Directional
#Comments: bi => two
/1167 "Change Offsets for a Punch. Use negative value for MicroJoint.\nEdit Offs
ets"
Change Offsets for a Punch. Use negative value for MicroJoint.\nEdit Offsets
/1166 "Optimize all CAMs (Punches and Cuts)"
Optimize all CAMs (Punches and Cuts)
/1071 "Check the validity of the geometry\nCheck"
Check the validity of the geometry\nCheck
/1176 "Set Sheet,Clamps, Distances between Parts, Material and User Data\nSet Sh
eet and Clamps"
Set Sheet,Clamps, Distances between Parts, Material and User Data\nSet Sheet and
Clamps
/1223 "Display help context for cncKad2006"
Display help context for cncKad2006
/1507 "Attach a specific offset to several entities (delete their previous offse
ts)"
Attach a specific offset to several entities (delete their previous offsets)
/230 "Select All\nAll"
Select All\nAll
/231 "Select Contour\nContour"
Select Contour\nContour
/232 "Select In Contour\nIn Contour"
Select In Contour\nIn Contour
/233 "Select Out Contour\nOut Contour"
Select Out Contour\nOut Contour
/234 "Previous Selection\nPrev Selection"
Previous Selection\nPrev Selection
/236 "Select Window\nWindow"
Select Window\nWindow
/235 "Toggle Filter On/Off\nFilter On/Off"
Toggle Filter On/Off\nFilter On/Off
/1213 "Select the name and style of the screen Font"
Select the name and style of the screen Font
/1013 "Run Simulation\nSimulation"
Run Simulation\nSimulation
/1061 "Show or hide one or more Toolbars"
Show or hide one or more Toolbars
/1212 "Change the language of user interface"
Change the language of user interface
/30127 "Send NC to a Diskette\nSend NC to a Diskette"
Send NC to a Diskette\nSend NC to a Diskette
/31062 "Set the order of the parts placed on the nesting\nOrder parts by mouse"
Set the order of the parts placed on the nesting\nOrder parts by mouse
/1142 "Move part to Axis Origin\nBottom Left --->0,0"
Move part to Axis Origin\nBottom Left --->0,0
#Comments: Origin => Beginning of coordinate system
/737 "Turret Setups\nTurret Setups"
Turret Setups\nTurret Setups
/1022 "Edit NC\nEdit NC"
Edit NC\nEdit NC
/1073 "Return to previous zoom\nZoom Previous"
Return to previous zoom\nZoom Previous
/1143 "Offset Contour\nOffset Contour"
Offset Contour\nOffset Contour
/19 "enter Batch mode, automation"
enter Batch mode, automation
/362 "Change Grid parameters"
Change Grid parameters
/1177 "Edit any type of CAM\nEdit CAM"
Edit any type of CAM\nEdit CAM
/363 "Relocate the position of a dimensions text\nRelocate the position of a dim
ensions text"
Relocate the position of a dimensions text\nRelocate the position of a dimension
s text
/1074 "Enable / disable Auto Scroll\nAuto Scroll"
Enable / disable Auto Scroll\nAuto Scroll
/1178 "Select the entities you want to engrave and press Enter\nEngrave entities
"
Select the entities you want to engrave and press Enter\nEngrave entities
/1192 "Cut text\nCut text"
Cut text\nCut text
/4841 "Toggle breakpoint\tF9"
Toggle breakpoint\tF9
#Comments: Breakpoint => decisive point;
/4836 "Step Over\tF10"
Step Over\tF10
/4838 "Set next statement\tF12"
Set next statement\tF12
/4832 "New PPO file"
New PPO file
/4833 "Save PPO file"
Save PPO file
/4839 "Stop debugging"
Stop debugging
/4840 "Restart"
Restart
/4842 "Remove all breakpoints"
Remove all breakpoints
#Comments: Breakpoint => decisive point;
/1027 "Create a New Tube\nNew Tube"
Create a New Tube\nNew Tube
#Comments: Tube file (.TUB)
/1025 "Open an existing tube\nOpen Tube"
Open an existing tube\nOpen Tube
#Comments: Tube file (.TUB)
/366 "Process Tube\nProcess Tube"
Process Tube\nProcess Tube
#Comments: Tube file (.TUB)
/1194 "Set Corner Parameters\nSet Corner Parameters"
Set Corner Parameters\nSet Corner Parameters
/1193 "Edit Corner Parameters\nEdit Corner Parameters"
Edit Corner Parameters\nEdit Corner Parameters
/31063 "Cut Open Contour\nCut Open Contour"
Cut Open Contour\nCut Open Contour
#Comments: Cut Open Contour => cut a contour which is not closed
/30140 "Show Shear Scrap\nShow Shear Scrap"
Show Shear Scrap\nShow Shear Scrap
#Comments: Scrap => Sheet leftovers
/2025 "Read SolidEdge Part\nSolidEdge"
Read SolidEdge Part\nSolidEdge
/1195 "Draw Arc\nDraw Arc"
Draw Arc\nDraw Arc
/2026 "Read SolidWorks Part\nSolidWorks"
Read SolidWorks Part\nSolidWorks
/15121 "Rotate Part 90 degrees\nRotate Part 90 degrees around central point"
Rotate Part 90 degrees\nRotate Part 90 degrees around central point
/15124 "Rotate Part -90 degrees\nRotate Part -90 degrees around central point"
Rotate Part -90 degrees\nRotate Part -90 degrees around central point
/15126 "Rotate Part 180 degrees\nRotate Part 180 degrees around central point"
Rotate Part 180 degrees\nRotate Part 180 degrees around central point
/15131 "Mirror Part Vertically\nMirror Part Vertically around central point"
Mirror Part Vertically\nMirror Part Vertically around central point
/15128 "Mirror Part Horizontally\nMirror Part Horizontally around central point"
Mirror Part Horizontally\nMirror Part Horizontally around central point
/1054 "Circular relief for future bending\nBend Relief"
Circular relief for future bending\nBend Relief
/189 "Explode an Instance to entities and move them to Sheet"
Explode an Instance to entities and move them to Sheet
#Comments: Explode => Divide (split); break to pieces
/192 "Copy part extent contour to sheet"
Copy part extent contour to sheet
/367 "Cuts parts using common cuts"
Cuts parts using common cuts
/15180 "Cut Sheet\nCut Sheet"
Cut Sheet\nCut Sheet
/15195 "Draw Spline\nDraw Spline"
Draw Spline\nDraw Spline
/15226 "Windows Font\nWindows Font"
Windows Font\nWindows Font
/31064 "Set the order of the parts to be cut\nOrder parts by mouse"
Set the order of the parts to be cut\nOrder parts by mouse
/369 "Single Selection\nSingle Selection"
Single Selection\nSingle Selection
/2277 "Zooms in realtime\nZoom Realtime"
Zooms in realtime\nZoom Realtime
#Comments: Realtime => at the same time as when it happens
/2278 "Moves the display\nPan Realtime"
Moves the display\nPan Realtime
#Comments: Pan => move slowly
/237 "Set Selection Filter\nFilter Settings"
Set Selection Filter\nFilter Settings
/370 " Add CAM Functions\n Add CAM Functions"
Add CAM Functions\n Add CAM Functions
/371 " Edit CAM Functions\nEdit CAM Functions"
Edit CAM Functions\nEdit CAM Functions
/2027 "Read Inventor\nInventor"
Read Inventor\nInventor
/15229 "Check Process\nCheck Process"
Check Process\nCheck Process
/372 "Draw Radius Dimension\nDraw Radius Dimension"
Draw Radius Dimension\nDraw Radius Dimension
/373 "Draw Diameter Dimension\nDraw Diameter Dimension"
Draw Diameter Dimension\nDraw Diameter Dimension
/374 "Draw Angle Dimension\nDraw Angle Dimension"
Draw Angle Dimension\nDraw Angle Dimension
/375 "Draw Linear Dimension\nDraw Linear Dimension"
Draw Linear Dimension\nDraw Linear Dimension
/693 "Draw Radius Dimension\nDraw Radius Dimension"
Draw Radius Dimension\nDraw Radius Dimension
/694 "Draw Diameter Dimension\nDraw Diameter Dimension"
Draw Diameter Dimension\nDraw Diameter Dimension
/695 "Draw Angle Dimension\nDraw Angle Dimension"
Draw Angle Dimension\nDraw Angle Dimension
/696 "Draw Linear Dimension\nDraw Linear Dimension"
Draw Linear Dimension\nDraw Linear Dimension
/720 "Explode Multiple Part/nExplode"
Explode Multiple Part/nExplode
#Comments:
/30651 "All parts are up to date"
All parts are up to date
/30652 "MIRROR: Select line for mirror axis"
MIRROR: Select line for mirror axis
#Comments: Line => long, thin mark
/30653 "Instance"
Instance
/30780 "ToolN not defined"
ToolN not defined
#Comments: N => number; NOT quantity NOR amount
/30781 "Save changes to %s?"
Save changes to %s?
/30787 "File should be saved before operation starts."
File should be saved before operation starts.
/30788 "Process finished successfully."
Process finished successfully.
/30789 "occurrence(s) were replaced."
occurrence(s) were replaced.
/30790 "The nest consists of parts with different materials.\nExport to AutoNest
is impossible."
The nest consists of parts with different materials.\nExport to AutoNest is impo
ssible.
/30792 "No properties are available for selected instance(s)"
No properties are available for selected instance(s)
/30793 "Cannot export an empty sheet to AutoNest"
Cannot export an empty sheet to AutoNest
/30827 "Add Mark Point"
Add Mark Point
#Comments: Mark => indicate, point out
/30863 "AutoCut is not available for this machine"
AutoCut is not available for this machine
/30864 "Select Plasma File"
Select Plasma File
/30865 "S to shift cutting edge"
S to shift cutting edge
/30024 "'Shift' to skip to part's order number"
'Shift' to skip to part's order number
#Comments: Order => request
/30161 "For Inch"
For Inch
/30908 "Press 'S' to shift cutting edge"
Press 'S' to shift cutting edge
/31065 "Move Support"
Move Support
/30909 "Delete Measure Cycle"
Delete Measure Cycle
/30162 "For mm"
For mm
/31209 "Unload Part\nUnload Part"
Unload Part\nUnload Part
/30782 "Get Instance Data\nInstance Data"
Get Instance Data\nInstance Data
/30783 "Cutting Technology Table\nCutting Technology Table"
Cutting Technology Table\nCutting Technology Table
#Comments: Table => chart
/30784 "Export to AutoNest\nExport to AutoNest"
Export to AutoNest\nExport to AutoNest
/30785 "Add numbers to used tools for Boschert machines"
Add numbers to used tools for Boschert machines
/30786 "Get Part Instance\nGet Part Instance"
Get Part Instance\nGet Part Instance
/31066 "Add pierce\nAdd Pierce"
Add pierce\nAdd Pierce
/31067 "Change the punching tool of a processed entity\nChange Tool for Existing
Punches"
Change the punching tool of a processed entity\nChange Tool for Existing Punches
/31073 "Draw Bend Line\nDraw Bend Line"
Draw Bend Line\nDraw Bend Line
#Comments: Line => long thin mark denoting bending
/31074 "Show Bend Lines\nShow Bend Lines"
Show Bend Lines\nShow Bend Lines
#Comments: Line => long thin mark denoting bending
/31075 "Run Bending Program\nRun Bending Program"
Run Bending Program\nRun Bending Program
/31076 "Edit Bend Line\nEdit Bend Line"
Edit Bend Line\nEdit Bend Line
#Comments: Line => long thin mark denoting bending
/31077 "Show End Points\nShow End Points"
Show End Points\nShow End Points
/31070 "No Bend Line Exists"
No Bend Line Exists
#Comments: Line => long thin mark denoting bending
/31071 "No Shape Found for Punch"
No Shape Found for Punch
/31072 "P=Toggle Rotate Mode"
P=Toggle Rotate Mode
/31130 "Add Predefined Shape File"
Add Predefined Shape File
/31131 "Remove Predefined Shape File"
Remove Predefined Shape File
/31132 "Offset X"
Offset X
/31133 "Offset Y"
Offset Y
/31134 "Too Many Transformations"
Too Many Transformations
/31135 "Choose Reference Point to Set as 0,0"
Choose Reference Point to Set as 0,0
/31136 "Starting AutoPunch ..."
Starting AutoPunch ...
/31137 "AutoPunch finished!"
AutoPunch finished!
/31153 "Select Identification's Contour"
Select Identification's Contour
/31210 "SELECT LINES"
SELECT LINES
/31211 "Select start CAM"
Select start CAM
/31212 "Place Position"
Place Position
/31213 "UNLOAD PART:"
UNLOAD PART:
/31138 "Set Reference Point as 0,0\nSet Reference Point as 0,0"
Set Reference Point as 0,0\nSet Reference Point as 0,0
/31214 "Convert To Bend Line\nConvert To Bend Line"
Convert To Bend Line\nConvert To Bend Line
#Comments: Line => long thin mark denoting bending
/31215 "Restore Default Clamps\nRestore Default Clamps"
Restore Default Clamps\nRestore Default Clamps
/31231 "Select, change and edit the part and NC report templates\nReport templat
e settings"
Select, change and edit the part and NC report templates\nReport template settin
gs
/30030 "Cannot create MetaFile. Image will not be created."
Cannot create MetaFile. Image will not be created.
/30537 "Mill Tool Data"
Mill Tool Data
/7005 "Common"
Common
/8553 "Type Properties"
Type Properties
/30666 "Close to clamp"
Close to clamp
/30667 "Bin/Pallet Number"
Bin/Pallet Number
#Comments: Bin => place to which processed parts will fall
/30668 "Move To"
Move To
/30669 "Same as on sheet"
Same as on sheet
/30670 "Unloaded"
Unloaded
/30796 "Part Deposit not initialized"
Part Deposit not initialized
/30797 "Used Station"
Used Station
/30798 "Setup Station"
Setup Station
#Comments:
/30799 "Heads:"
Heads:
/30800 "Head Distance"
Head Distance
/30913 "Tool makes tools assignments to stations impossible."
Tool makes tools assignments to stations impossible.
/31079 "Bend Angle"
Bend Angle
/31080 "Bend Radius"
Bend Radius
/31216 "Model file not available:"
Model file not available:
/6600 "mm"
mm
/6601 "cm"
cm
/6602 "inches"
inches
/6603 "feet"
feet
/6604 "Import"
Import
/6605 "sq.m / 100"
sq.m / 100
/6606 "sq.yrd / 100"
sq.yrd / 100
/6607 "m"
m
/6608 "yard"
yard
/6609 "sq.feet / 100"
sq.feet / 100
/6610 "Ignore duplicate basesize:"
Ignore duplicate basesize:
#Comments: Duplicate => copy, replicate
/6611 "Ignore duplicate size:"
Ignore duplicate size:
/6612 "Size is absent"
Size is absent
/6613 "Do you want to interrupt Import?"
Do you want to interrupt Import?
/6614 "\nStage %d."
\nStage %d.
/6615 " \n%d entities. %d:%d:%d"
\n%d entities. %d:%d:%d
/6616 "\n%d contours. %d:%d:%d"
\n%d contours. %d:%d:%d
/6617 "\n%d parts with %d holes and %d internals. %d:%d:%d"
\n%d parts with %d holes and %d internals. %d:%d:%d
/6618 "DXF"
DXF
/6619 "CADL"
CADL
/6620 "Polaris"
Polaris
/6621 "HP/GL"
HP/GL
/6622 "EIA"
EIA
/6623 "X Y POINTS"
X Y POINTS
/6624 "ANSI/AAMA"
ANSI/AAMA
/6625 "DFT(cncKad)"
DFT(cncKad)
/6626 "X Y NC"
X Y NC
/6627 "DM/PL"
DM/PL
/6631 "Material list is not found."
Material list is not found.
/30505 "cncKad doesn't support this version of DWG format\nPlease try to import
this file as DXF format"
cncKad doesn't support this version of DWG format\nPlease try to import this fil
e as DXF format
/30506 "Cannot run :"
Cannot run :
/50006781 "Name"
Name
/30507 "Color"
Color
/30034 "Empty String"
Empty String
/8212 "Are you sure?"
Are you sure?
/30035 "Toolbar positions were saved"
Toolbar positions were saved
/30460 "activate Option number %d in the "
activate Option number %d in the
/30461 "Sorry, this Option is not supported by your Plug (Key)."
Sorry, this Option is not supported by your Plug (Key).
/30462 "If you wish to activate this Option, please"
If you wish to activate this Option, please
/30463 "No Plug (Key) was found"
No Plug (Key) was found
/30464 "Plug (Key) Error"
Plug (Key) Error
/30791 "Do not ask for this shape again"
Do not ask for this shape again
/30309 "Thickness cannot be zero"
Thickness cannot be zero
/30310 "Add folder to favorites"
Add folder to favorites
/30311 "Token was not found"
Token was not found
/30312 "Part file does not exist"
Part file does not exist
/30313 "Part is dirty"
Part is dirty
/30314 "File could not be imported"
File could not be imported
/30315 "File has contours problems"
File has contours problems
/30672 "Subnest Num"
Subnest Num
#Comments: Num => shortcut of "number"
/30421 "cncKad2006 AutoNest Version 3.51\nAutoNest\nAutoNest\nSheet files (*.DSP
)\n.DSP\nAutoNest.Document\nAutoNest Document"
cncKad2006 AutoNest Version 3.51\nAutoNest\nAutoNest\nSheet files (*.DSP)\n.DSP\
nAutoNest.Document\nAutoNest Document
/31100 "Performing AutoNest using the following optimization parameters:"
Performing AutoNest using the following optimization parameters:
/31196 "Optimization Quality:"
Optimization Quality:
/31102 "Both Contours"
Both Contours
/30043 "The materials of one or more of the parts were changed. Would you like t
o update them (This will delete all these parts from any SubNest)?"
The materials of one or more of the parts were changed. Would you like to update
them (This will delete all these parts from any SubNest)?
/30044 "AutoNest found that your part is round. Are you sure you want to disable
this attribute\n(This may cause AutoNest to place it incorrectly on the sheet)?
"
AutoNest found that your part is round. Are you sure you want to disable this at
tribute\n(This may cause AutoNest to place it incorrectly on the sheet)?
/30045 "AutoNest found that your part is NOT round. Are you sure you want to ena
ble this attribute\n(This may cause AutoNest to place it incorrectly on the shee
t)?"
AutoNest found that your part is NOT round. Are you sure you want to enable this
attribute\n(This may cause AutoNest to place it incorrectly on the sheet)?
/30176 "Previous report file will be opened (without creation)"
Previous report file will be opened (without creation)
/30177 "Creating report file(s)"
Creating report file(s)
/30178 "This could take a while"
This could take a while
/30329 "New Placement array"
New Placement array
/30330 "Cannot show filled parts while moving clamps"
Cannot show filled parts while moving clamps
/30175 "Print Preview - Doc Report"
Print Preview - Doc Report
/30234 "File is missing:"
File is missing:
/30235 "Operation completed"
Operation completed
/30236 "All parts were already placed."
All parts were already placed.
/30253 "No SubNest was created for current material"
No SubNest was created for current material
/30297 "The NC file doesn't exist"
The NC file doesn't exist
/30466 "sq.inch"
sq.inch
/30467 "Weight (lbs)"
Weight (lbs)
/30486 "Use 'Edit buffer' to set the special buffer"
Use 'Edit buffer' to set the special buffer
/30883 "OK to delete part(s) / group(s)?"
OK to delete part(s) / group(s)?
/30884 "OK to delete group(s)?"
OK to delete group(s)?
/30885 "Click, drag and release mouse button to measure distance. Use CTRL to sn
ap endpoint. Use SHIFT to snap center."
Click, drag and release mouse button to measure distance. Use CTRL to snap endpo
int. Use SHIFT to snap center.
/30886 "Click inside a placement to add text to the part."
Click inside a placement to add text to the part.
/30887 "Click clamp and drag it to the desired position."
Click clamp and drag it to the desired position.
/30888 "Click on placements according to the processing order. Use CTRL to start
from the beginning."
Click on placements according to the processing order. Use CTRL to start from th
e beginning.
/30889 "Click to select placement, click and drag to select multiple placements.
Right Click to shoot placement."
Click to select placement, click and drag to select multiple placements. Right C
lick to shoot placement.
/30890 "Click to select placement, click and drag to select multiple placements.
Right Click to rotate placement."
Click to select placement, click and drag to select multiple placements. Right C
lick to rotate placement.
/521 "Zoom"
Zoom
/522 "Nesting"
Nesting
/523 "Adjustment"
Adjustment
/50003311 "cm"
cm
/50003313 "feet"
feet
/50003314 "sq.m"
sq.m
/50003315 "sq.yrd"
sq.yrd
/50003316 "sq.feet"
sq.feet
/50007001 "Save current changes: %s"
Save current changes: %s
/50007002 "Nest is found"
Nest is found
/50007003 "NO NEST"
NO NEST
/50007004 "No more data-bases allowed"
No more data-bases allowed
/50007005 "Replace existing file %s"
Replace existing file %s
/50007006 "This is an empty Nest"
This is an empty Nest
/50007007 "OK to clear Sheet?"
OK to clear Sheet?
/50007008 "Cannot include all parts. Continue?"
Cannot include all parts. Continue?
/30487 "Edit an existing Placement array"
Edit an existing Placement array
/30523 "Do you want to change the order of subnests?"
Do you want to change the order of subnests?
#Comments: Order => sequence
/30678 "No part placement was selected."
No part placement was selected.
/30524 "Because of change of the sizes some placements will be deleted.\nContinu
e?"
Because of change of the sizes some placements will be deleted.\nContinue?
/30807 "The part doesn't have CAMs"
The part doesn't have CAMs
/30808 "Set Multiheads"
Set Multiheads
/30809 "Distance Between Heads: %s"
Distance Between Heads: %s
/30830 "The mirror is impossible because for one of parts of selected placements
mirror is forbidden "
The mirror is impossible because for one of parts of selected placements mirror
is forbidden
/30868 "Replace part %s with:"
Replace part %s with:
/30869 "- Quality: %d%%"
- Quality: %d%%
/30811 "(%d Optimization Trials \\ of %d)"
(%d Optimization Trials \\ of %d)
/30511 "The following parts are included in groups and can't be rotated:"
The following parts are included in groups and can't be rotated:
/30880 "Are you sure you want to create DFT files?"
Are you sure you want to create DFT files?
/30881 "Two or more parts have the same description. The operation will not be p
erformed."
Two or more parts have the same description. The operation will not be performed
.
/30882 "The following files were created:"
The following files were created:
/526 "Ready"
Ready
/5000230 "Create a new SubNest\nNew"
Create a new SubNest\nNew
/5000231 "Open an existing document\nOpen"
Open an existing document\nOpen
/50008000 "Close the active document\nClose"
Close the active document\nClose
/50001005 "Save the active document\nSave"
Save the active document\nSave
/50008001 "Change the printing options\nPage Setup"
Change the printing options\nPage Setup
/50008002 "Change the printer and printing options\nPrint Setup"
Change the printer and printing options\nPrint Setup
/5000235 "Print the active document\nPrint"
Print the active document\nPrint
/50008004 "Print Preview\nPrint Preview"
Print Preview\nPrint Preview
/50001018 "Quit the application; prompts to save documents\nExit"
Quit the application; prompts to save documents\nExit
/50001017 "Open this document"
Open this document
/50008022 "Sheet rotation is prohibited."
Sheet rotation is prohibited.
/50008010 "Erase the selection\nErase"
Erase the selection\nErase
/50008011 "Erase everything\nErase All"
Erase everything\nErase All
/50008012 "Copy the selection and put it on the Clipboard\nCopy"
Copy the selection and put it on the Clipboard\nCopy
/50008013 "Cut the selection and put it on the Clipboard\nCut"
Cut the selection and put it on the Clipboard\nCut
/50008014 "Find the specified text\nFind"
Find the specified text\nFind
/50008015 "Insert Clipboard contents\nPaste"
Insert Clipboard contents\nPaste
/50008016 "Repeat the last action\nRepeat"
Repeat the last action\nRepeat
/50008017 "Replace specific text with different text\nReplace"
Replace specific text with different text\nReplace
/50008018 "Select the entire document\nSelect All"
Select the entire document\nSelect All
/50008019 "Undo the last action\nUndo"
Undo the last action\nUndo
/50001023 "Show or hide the toolbar\nToggle ToolBar"
Show or hide the toolbar\nToggle ToolBar
/50001024 "Show or hide the status bar\nToggle Status"
Show or hide the status bar\nToggle Status
/50007191 "No"
No
/50007192 "Layers : %d"
Layers : %d
/50007193 "Runs : %d"
Runs : %d
/50007194 "Create External Order"
Create External Order
#Comments: Order =>
/50007195 "Cannot import file with extension %s"
Cannot import file with extension %s
/50007196 "Cannot put job in queue. Try again?"
Cannot put job in queue. Try again?
/533 "OLE initialization failed. Make sure that the OLE libraries are the correc
t version"
OLE initialization failed. Make sure that the OLE libraries are the correct vers
ion
/30891 "Some of the parts don't contain any CAM. Are you sure you want to create
NC?"
Some of the parts don't contain any CAM. Are you sure you want to create NC?
/30298 "Sort Subnests"
Sort Subnests
/30179 "A report file(s) is opened. Please close it and try again."
A report file(s) is opened. Please close it and try again.
/528 "&Save\tCtrl+S"
&Save\tCtrl+S
/50004076 "Efficiency"
Efficiency
/205 "You must select a material"
You must select a material
/210 "Show All Materials"
Show All Materials
/214 "Parts made of other materials already exist on SubNest. Do you want to cle
ar sheet and change material anyway?"
Parts made of other materials already exist on SubNest. Do you want to clear she
et and change material anyway?
/215 "Cannot place a part on a SubNest from a different material"
Cannot place a part on a SubNest from a different material
/216 "Cannot change material - part is already placed on a Subnest. Do you want
to delete all placed parts and change the material anyway?"
Cannot change material - part is already placed on a Subnest. Do you want to del
ete all placed parts and change the material anyway?
/217 "One or more parts are contained in groups AND/OR placed on subnests. Do yo
u want to delete them from SubNests and still change the material?"
One or more parts are contained in groups AND/OR placed on subnests. Do you want
to delete them from SubNests and still change the material?
/219 "No subNest for this material exists. Hence, AutoNest has created one"
No subNest for this material exists. Hence, AutoNest has created one
/225 "Expand all tree"
Expand all tree
/229 "Collapse all tree"
Collapse all tree
/240 "Selected SubNests will be deleted"
Selected SubNests will be deleted
/241 "At least one SubNest should exist"
At least one SubNest should exist
/50006811 "Delete selected\nDelete selected"
Delete selected\nDelete selected
/30121 "Redo\nRedo"
Redo\nRedo
/50005005 "Rotate 90 Clockwise\nRotate 90 Clockwise"
Rotate 90 Clockwise\nRotate 90 Clockwise
/50009028 "Open current Nest as DFT in cncKad\nOpen current Nest as DFT in cncKa
d"
Open current Nest as DFT in cncKad\nOpen current Nest as DFT in cncKad
/50009029 "Open current Nest as NST in cncKad\nOpen current Nest as NST in cncKa
d"
Open current Nest as NST in cncKad\nOpen current Nest as NST in cncKad
/50001205 "Generate NC for all SubNests\nGenerate NC for all SubNests"
Generate NC for all SubNests\nGenerate NC for all SubNests
/50001073 "Ungroup Selected Groups On Sheet\nUngroup Selected Groups On Sheet"
Ungroup Selected Groups On Sheet\nUngroup Selected Groups On Sheet
/50001074 "Ungroup All Groups\nUngroup All Groups"
Ungroup All Groups\nUngroup All Groups
/50001119 "Continue with next sheet\nContinue with next sheet"
Continue with next sheet\nContinue with next sheet
/543 "Edit Part in cncKad\nEdit Part in cncKad"
Edit Part in cncKad\nEdit Part in cncKad
/544 "Update Part\nUpdate Part"
Update Part\nUpdate Part
/638 "Set Clamps Position\nMove Clamps"
Set Clamps Position\nMove Clamps
/30504 "OK to delete part(s)?"
OK to delete part(s)?
/50007010 "This file contains invalid CAD information."
This file contains invalid CAD information.
/529 "File: %s Placed: %d Efficiency: %.1f%% Width: %.1f Length: %.1f Sheets
: %d "
File: %s Placed: %d Efficiency: %.1f%% Width: %.1f Length: %.1f Sheets: %d
/50007012 "Sheet area (%.1f) < Parts area (%.1f)"
Sheet area (%.1f) < Parts area (%.1f)
/50007013 "Corrupted Sheet file"
Corrupted Sheet file
/50007014 "Sheet contains part's intersecting.\nPrint anyway ?"
Sheet contains part's intersecting.\nPrint anyway ?
/50007015 "Sheet borders"
Sheet borders
/50007016 "Part (default)"
Part (default)
/50007017 "Selected parts"
Selected parts
/50007018 "Parts with Operation Stop"
Parts with Operation Stop
/50007019 "Intersected parts"
Intersected parts
/50007020 "Sheet background"
Sheet background
/50007021 "Right limit"
Right limit
/50007022 "Save only nested parts (and zero remainders)"
Save only nested parts (and zero remainders)
/50007023 "Number of sheets: %d"
Number of sheets: %d
#Comments: Number => amount
/50007025 "Printer not configured.\nUse 'Printer setup' or the <Control panel> t
o configure"
Printer not configured.\nUse 'Printer setup' or the <Control panel> to configure
/50007026 "Cannot start print job"
Cannot start print job
/50007027 "Communication problem, check hardware"
Communication problem, check hardware
/50007028 "Comm State error, check cables"
Comm State error, check cables
#Comments: Comm => shortcut of "Communication"
/50007029 "Not enough memory for new parts"
Not enough memory for new parts
/50007030 "Notch with this number already exists"
Notch with this number already exists
/50007035 "%3ld:%02d Total:%d%s Placed:%d Efficiency:%.1f%% Width:%.1f Leng
th:%.1f"
%3ld:%02d Total:%d%s Placed:%d Efficiency:%.1f%% Width:%.1f Length:%.1f
/50007036 "Pay attention ! This is not a complete nest !\n\n Placed only %
d parts from %d"
Pay attention ! This is not a complete nest !\n\n Placed only %d parts fro
m %d
/50007037 "This file is read as DXF-file"
This file is read as DXF-file
/50009013 "Group"
Group
/50007041 "File name: %s"
File name: %s
/50007042 "Description: %s"
Description: %s
/50007045 "Notch with such number already exists"
Notch with such number already exists
/50007046 "Part already on the Sheet. Perform buffering?"
Part already on the Sheet. Perform buffering?
/50007047 "Sheet contains parts. Change dimensions anyway?"
Sheet contains parts. Change dimensions anyway?
/50007049 "Cannot perform buffering."
Cannot perform buffering.
/50007050 "Insufficient global memory: "
Insufficient global memory:
/50007051 "No part selected"
No part selected
/50007052 "Part is a group"
Part is a group
/50007053 "Part is placed on sheet"
Part is placed on sheet
/50007054 "No part(s) selected on sheet"
No part(s) selected on sheet
/50007055 "File unwritable: %s"
File unwritable: %s
/50007056 "No closed contours extracted from %s"
No closed contours extracted from %s
/50007057 "No parts on sheet"
No parts on sheet
/50007058 "Syntax error: "
Syntax error:
/50007059 "Material type: %s"
Material type: %s
/50007060 "Previous Operation Stop"
Previous Operation Stop
/50007061 "Drill"
Drill
/50007062 "Plotter file will be sent to drive %s \nwhen Output Manager is placed
into drive %s"
Plotter file will be sent to drive %s \nwhen Output Manager is placed into drive
%s
/50007063 "OUTMAN.INI - file is not found"
OUTMAN.INI - file is not found
/50007064 "The wrong plotter number is used"
The wrong plotter number is used
/6883 "The plotter is not installed"
The plotter is not installed
/50006884 "The queue file for this plotter cannot be created"
The queue file for this plotter cannot be created
/50007067 "The transmit file doesn't exist"
The transmit file doesn't exist
/6886 "The queue file cannot be opened"
The queue file cannot be opened
/50007069 "Nest file: %s %s"
Nest file: %s %s
/50007070 "Description: %s"
Description: %s
/50007071 "Material: %s"
Material: %s
/50007072 "Thickness : %.2f %s "
Thickness : %.2f %s
/50007073 "Area efficiency: %.2f%%"
Area efficiency: %.2f%%
/50007074 "The title "gKad X.XX" was not found"
The title "gKad X.XX" was not found
/50007075 "Entities out of contour were found in %s. Check your contours"
Entities out of contour were found in %s. Check your contours
/50007076 "Thickness (%s): %.2f"
Thickness (%s): %.2f
/50007077 "Continue duplication?"
Continue duplication?
/50007078 "Open Sheet file"
Open Sheet file
/50007079 "Sheet files (*.DSP)"
Sheet files (*.DSP)
/50007080 "Sheet weight(%s): %.3f "
Sheet weight(%s): %.3f
/50007081 "Order files (*.ORD)"
Order files (*.ORD)
#Comments: Order => request
/50007082 "Save Sheet file"
Save Sheet file
/50007083 "Open External Order"
Open External Order
#Comments: Order => sequence
/50007084 "Write reports to file"
Write reports to file
/50007085 "This is only AutoNest - Lite version !\nYou have exceeded max allowed
value(s):\n Parts - %d\n Sheet Length - %.2f\n Sheet Width - %.2f"
This is only AutoNest - Lite version !\nYou have exceeded max allowed value(s):\
n Parts - %d\n Sheet Length - %.2f\n Sheet Width - %.2f"
/50007086 "Perform automatic cutter/plotter motion optimization"
Perform automatic cutter/plotter motion optimization
/50007087 "Total Perimeter"
Total Perimeter
/50007088 "Total perimeter: %.2f"
Total perimeter: %.2f
/50007089 "This is only DEMO version"
This is only DEMO version
/563 "Operation Stop"
Operation Stop
/50007092 "Grill Adjust"
Grill Adjust
/50007093 "Notch - M19 for Gerber Cutter"
Notch - M19 for Gerber Cutter
/50007094 "Flick notch - M68 for Gerber Cutter"
Flick notch - M68 for Gerber Cutter
#Comments: Flick => tap, light slap; hit lightly
/30422 "Batch operation doesn't perform result from error."
Batch operation doesn't perform result from error.
/30423 "Wrong batch operation-keyword - "
Wrong batch operation-keyword -
/30424 "Wrong batch unit-keyword - "
Wrong batch unit-keyword -
/30425 "Wrong batch set-keyword - "
Wrong batch set-keyword -
/30426 "Wrong batch save-keyword - "
Wrong batch save-keyword -
/30427 "Error access to file: "
Error access to file:
/30428 "Wrong batch open-keyword - "
Wrong batch open-keyword -
/30429 "There aren't necessary keywords."
There aren't necessary keywords.
/30430 "Wrong batch sheet-keyword - "
Wrong batch sheet-keyword -
/30431 "Wrong batch import-keyword - "
Wrong batch import-keyword -
/30432 "Wrong batch import format-keyword - "
Wrong batch import format-keyword -
/30433 "Wrong batch import unit-keyword - "
Wrong batch import unit-keyword -
/532 "Batch works without message file."
Batch works without message file.
/30488 "Batch was canceled."
Batch was canceled.
/30110 "Batch message file isn't accessible."
Batch message file isn't accessible.
/30111 "Batch process interrupted.\nUse "
Batch process interrupted.\nUse
/30112 "--- Batch save with name - "
--- Batch save with name -
/30436 "Ignore import GBUF = "
Ignore import GBUF =
/30437 "Batch was canceled during nesting."
Batch was canceled during nesting.
/30438 "Batch protection error."
Batch protection error.
/50007120 "Do you wish to store changes of current special?"
Do you wish to store changes of current special?
/50007121 "Linear dimensions - %s Area dimensions - %s"
Linear dimensions - %s Area dimensions - %s
/50007122 "Total:"
Total:
/50007125 "Perimeter"
Perimeter
/50007126 "Internals:"
Internals:
/50007127 "Length"
Length
/50007128 "Texts:"
Texts:
/50007130 "Buttons"
Buttons
/50007141 "Cut"
Cut
/50007142 "Punch"
Punch
/50007143 "AuxDrill"
AuxDrill
#Comments:
/50007144 "Holes"
Holes
/50007145 "Buffer size"
Buffer size
/50007146 "Total area: %.4f"
Total area: %.4f
/50007147 "Total internals:"
Total internals:
/50007148 "PART INFO"
PART INFO
#Comments: Info => shortcut of "information"
/50007149 "NEST REPORT"
NEST REPORT
/50007150 "Total"
Total
/50007151 "Placed"
Placed
/50007152 "Net"
Net
/50007153 "Gross"
Gross
/50007154 "Sheet length: %.2f"
Sheet length: %.2f
/50007155 "Sheet width: %.2f"
Sheet width: %.2f
/50007157 "Initial"
Initial
/50007161 "QTY"
QTY
#Comments: Qty => shortcut of "quantity"
/50007162 "LENGTH"
LENGTH
/397 "Width"
Width
/50007164 "WGHT(Kg)"
WGHT(Kg)
#Comments: WGHT => shortcut of "weight"
/50007165 "Kg"
Kg
/50007166 "Cannot read material number."
Cannot read material number.
/50007167 "Error while importing file: %s"
Error while importing file: %s
/50007168 "NEST:"
NEST:
/50007169 "Nest Num : %s "
Nest Num : %s
#Comments: Num => shortcut of "number"
/50007170 "Sheet Length : %.2f (%s)"
Sheet Length : %.2f (%s)
/50007171 "Sheet Width : %.2f (%s)"
Sheet Width : %.2f (%s)
/50007172 "Area Efficiency : %.2f %%"
Area Efficiency : %.2f %%
/50007173 "Num of Sheets : %d"
Num of Sheets : %d
#Comments: Num => shortcut of "number"
/50007174 "Total Area : %.2f (%s)"
Total Area : %.2f (%s)
/50007175 "Sheet Area : %.2f (%s)"
Sheet Area : %.2f (%s)
/50007176 "Material : %s"
Material : %s
/50007178 "Part Num"
Part Num
#Comments: Num => shortcut of "number"
/50007179 "QTY"
QTY
#Comments: Qty => shortcut of "quantity"
/50007180 "Area(%s)"
Area(%s)
/50007181 "Weight(%s)"
Weight(%s)
/50007182 "Part already on the Sheet. Perform editing?"
Part already on the Sheet. Perform editing?
/50007183 "Sheet border"
Sheet border
/50007185 "Selected parts"
Selected parts
/50007187 "Intersected parts"
Intersected parts
/50007188 "Sheet background"
Sheet background
/50007189 "Parts Cut"
Parts Cut
/50007190 "Right limit"
Right limit
/50001062 "Undo\nUndo"
Undo\nUndo
/50001088 "Fonts"
Fonts
/50001010 "Create rectangular parts\nRectangular parts"
Create rectangular parts\nRectangular parts
/30326 "Qty Order...\nQty Order"
Qty Order...\nQty Order
#Comments: Qty => shortcut of "quantity"; Order => request made by costumer;
/50001013 "Plot\nPlot"
Plot\nPlot
/50001014 "Plotter Setup\nPlotter Setup"
Plotter Setup\nPlotter Setup
/30122 "Fill with color\nFill with color"
Fill with color\nFill with color
/50001108 "Put rivets"
Put rivets
#Comments:
/50001011 "Load Order File\nOrder File"
Load Order File\nOrder File
#Comments: Order => request
/50001057 "Set as Remnant\nRemnant"
Set as Remnant\nRemnant
#Comments: Remnant => unused portion
/50001012 "Create/Load Order File\nCreate/Load Order File"
Create/Load Order File\nCreate/Load Order File
#Comments: Order => request
/5000256 "Zoom Window\nZoom Window"
Zoom Window\nZoom Window
/5000257 "Zoom Previous\nZoom Previous"
Zoom Previous\nZoom Previous
/5000237 "Adjust left\nLeft"
Adjust left\nLeft
/5000238 "Adjust right\nRight"
Adjust right\nRight
/5000239 "Adjust down\nDown"
Adjust down\nDown
/50001036 "Adjust up\nUp"
Adjust up\nUp
/50001052 "Remove selection\nRemove"
Remove selection\nRemove
/534 "Adjust left-up\nLeft Up"
Adjust left-up\nLeft Up
/535 "Adjust left-down\nLeft Down"
Adjust left-down\nLeft Down
/50005001 "Adjust right-down\nRight Down"
Adjust right-down\nRight Down
/50005003 "Adjust Right-Up\nRight-Up"
Adjust Right-Up\nRight-Up
/5000244 "Rotate 90\nRotate 90"
Rotate 90\nRotate 90
/5000245 "Rotate 180\nRotate 180"
Rotate 180\nRotate 180
/5000247 "Rotate Mode\nRotate Mode"
Rotate Mode\nRotate Mode
/5000246 "Shoot Mode\nShoot Mode"
Shoot Mode\nShoot Mode
/5000255 "Redraw the graphics screen\nRedraw"
Redraw the graphics screen\nRedraw
/5000259 "Nest Report\nNest Report\nNest"
Nest Report\nNest Report\nNest
/30120 "Print Report\nPrint"
Print Report\nPrint
/5000260 "Order Wizard\nWizard"
Order Wizard\nWizard
#Comments: Feature used to create arrangement,sequence
/50001113 "Delete All SubNests\nDelete All SubNests"
Delete All SubNests\nDelete All SubNests
/738 "Settings\nSettings"
Settings\nSettings
/538 "Create Filler order File\nCreate Filler order File"
Create Filler order File\nCreate Filler order File
#Comments: Filler => small parts which can fill in the free space in the nest; o
rder => request
/50001114 "Select filler parts"
Select filler parts
/50001066 "Rotate 90 left"
Rotate 90 left
/50001067 "Rotate 90 right"
Rotate 90 right
/50001068 "Rotate 180"
Rotate 180
/539 "Customize Toolbars\nCustomize Toolbars"
Customize Toolbars\nCustomize Toolbars
/5000248 "Rerun current SubNest\nRerun"
Rerun current SubNest\nRerun
/5000249 "Fill Holes\nFill Holes"
Fill Holes\nFill Holes
/50001116 "Next Subnest\nNext Subnest"
Next Subnest\nNext Subnest
/50001117 "Previous SubNest\nPrevious SubNest"
Previous SubNest\nPrevious SubNest
/540 "Subnest Number"
Subnest Number
/5000242 "Axis Y Mirror\nY Mirror"
Axis Y Mirror\nY Mirror
/5000243 "Axis X Mirror\nX Mirror"
Axis X Mirror\nX Mirror
/50001118 "Nest Strategy\nNest Strategy"
Nest Strategy\nNest Strategy
/30123 "Zoom In\nZoom In"
Zoom In\nZoom In
/30124 "Zoom Out\nZoom Out"
Zoom Out\nZoom Out
/30301 "Start/Continue AutoNest (next sheet)\nStart/Continue AutoNest"
Start/Continue AutoNest (next sheet)\nStart/Continue AutoNest
/50005006 "Processing Order by mouse\nProcessing Order"
Processing Order by mouse\nProcessing Order
#Comments: Order => sequence
/50001021 "Delete current SubNest\nDelete current subnest"
Delete current SubNest\nDelete current subnest
/542 "Open SubNest in cncKad\nOpen SubNest in cncKad"
Open SubNest in cncKad\nOpen SubNest in cncKad
/632 "Set Current Machine\nSet Current Machine"
Set Current Machine\nSet Current Machine
/644 "Generate NC for Current Nest\nGenerate NC for Current Nest"
Generate NC for Current Nest\nGenerate NC for Current Nest
/50001059 "Grill\nGrill"
Grill\nGrill
#Comments:
/50001060 "Optimum calculations\nOptimum"
Optimum calculations\nOptimum
/50001082 "Hide grill lines\nHide grill"
Hide grill lines\nHide grill
/50001081 "Grill adjust\nGrill"
Grill adjust\nGrill
/50001083 "Limit Rotation\nLimit Rotation"
Limit Rotation\nLimit Rotation
/50001084 "Round after rotation\nRound"
Round after rotation\nRound
/50001086 "Display the entire Sheet\nZoom Sheet"
Display the entire Sheet\nZoom Sheet
/50001087 "Colors"
Colors
/5000494 "Rotate\nRotate"
Rotate\nRotate
/50001053 "Duplicate selection\nDuplicate"
Duplicate selection\nDuplicate
#Comments: Duplicate => copy, replicate
/50001056 "Detect Intersections\nIntersections"
Detect Intersections\nIntersections
/50001035 "Delete Part\nDelete"
Delete Part\nDelete
/50001089 "AutoSave"
AutoSave
/50001061 "Working Units"
Working Units
/5000250 "Stop AutoNesting\nStop"
Stop AutoNesting\nStop
/50001091 "Confirmation"
Confirmation
/30357 "Selection Mode\nSelection Mode"
Selection Mode\nSelection Mode
/5000253 "Measure Mode\nMeasure Mode"
Measure Mode\nMeasure Mode
/5000254 "Text Mode\nText Mode"
Text Mode\nText Mode
/50001085 "Display Parts On Sheet\n Display"
Display Parts On Sheet\n Display
/50001054 "Generate Array\nArray"
Generate Array\nArray
/5000234 "Export to CAD-CAM Files\nExport"
Export to CAD-CAM Files\nExport
/5000233 "Import from CAD-CAM Files\nImport"
Import from CAD-CAM Files\nImport
/50001112 "New SubNest\nNew SubNest"
New SubNest\nNew SubNest
/50001006 "Merge an existing document\nMerge"
Merge an existing document\nMerge
/50005007 "Clear Sheet\nClear Sheet "
Clear Sheet\nClear Sheet
#Comments: Remove objects from the sheet
/50001032 "Part Information\nPart Info"
Part Information\nPart Info
/50001033 "Global Info\nGlobal"
Global Info\nGlobal
#Comments: Info => shortcut of "information"; General information
/5000492 "Edit Part\nEdit"
Edit Part\nEdit
/50001071 "Generate group\nGroup"
Generate group\nGroup
/50001072 "Delete group\nUngroup"
Delete group\nUngroup
/50001058 "Set Sheet and Clamps\nSet Sheet and Clamps"
Set Sheet and Clamps\nSet Sheet and Clamps
/30892 "Create DFT files for all parts that doesn't have it"
Create DFT files for all parts that doesn't have it
/30893 "Rotate by local center Mode\nRotate by local center Mode"
Rotate by local center Mode\nRotate by local center Mode
/50001025 "Show or hide the Zoom\nToggle Zoom"
Show or hide the Zoom\nToggle Zoom
/50001026 "Show or hide the Adjustment\nToggle Adjustment"
Show or hide the Adjustment\nToggle Adjustment
/50001027 "Show or hide the Tools\nToggle Tools"
Show or hide the Tools\nToggle Tools
/50001028 "Show or hide the AutoNest\nToggle AutoNest"
Show or hide the AutoNest\nToggle AutoNest
/50001029 "Show or hide the Nest\nToggle Nest"
Show or hide the Nest\nToggle Nest
/242 "Meanwhile, you can update quantities only if material filter is set to a s
pecific material. Use Setting --> Material to set sheet quantities."
Meanwhile, you can update quantities only if material filter is set to a specifi
c material. Use Setting --> Material to set sheet quantities.
/243 "Default parameters for new SubNests"
Default parameters for new SubNests
/417 "Material cannot be read from file (file is missing or file does not contai
n material data)."
Material cannot be read from file (file is missing or file does not contain mate
rial data).
/418 "Cannot change the material filter: no part is made of the requested materi
al."
Cannot change the material filter: no part is made of the requested material.
/30046 "Saving, please wait..."
Saving, please wait...
/30047 "Cannot change material: Part is contained in one or more groups. \nDelet
e the groups first."
Cannot change material: Part is contained in one or more groups. \nDelete the gr
oups first.
/30113 "The material filter does not contain any SubNest. Material filter is dis
abled."
The material filter does not contain any SubNest. Material filter is disabled.
/50008024 "Error"
Error
/30547 "No sheets are available in the sheets list, change quantities"
No sheets are available in the sheets list, change quantities
/30679 "Shows the quantity of parts placed in the Subnests"
Shows the quantity of parts placed in the Subnests
/30810 "Rotate to Best Angle\nRotate to Best Angle"
Rotate to Best Angle\nRotate to Best Angle
/30831 "Replace the part with another part\nReplace the part with another part"
Replace the part with another part\nReplace the part with another part
/30870 "Group Information\nGroup Info"
Group Information\nGroup Info
/31191 " Area"
Area
/31192 " Weight"
Weight
/31197 "Cannot make an array from the parts. Check quantities."
Cannot make an array from the parts. Check quantities.
/31235 "Restore Description To Original Text Size And Place"
Restore Description To Original Text Size And Place
/30538 "browse button control"
browse button control
/30813 "Select Standard Intersection"
Select Standard Intersection
/30916 " Select Contour to add the cycle before"
Select Contour to add the cycle before
/30917 " Specify a place for measure"
Specify a place for measure
/30918 " Select Measure Cycle to delete"
Select Measure Cycle to delete
/30240 "Die"
Die
/30241 "Lock Die"
Lock Die
/30372 "Are you sure you want to add the tools to the selected libraries?"
Are you sure you want to add the tools to the selected libraries?
/30373 "No target tool library was selected."
No target tool library was selected.
/30392 "MJ"
MJ
#Comments: MJ => MicroJoint
/4805 "Tool Library "
Tool Library
/30284 "Crunch Chamfer"
Crunch Chamfer
/30397 "Invalid MicroJoint values"
Invalid MicroJoint values
/30395 "Crunch Arc"
Crunch Arc
/30406 "Cut And Split Sheet"
Cut And Split Sheet
/30452 "Scallop cannot be 0."
Scallop cannot be 0.
/30453 "Step cannot be 0."
Step cannot be 0.
/30454 "Grid parameters cannot be zero."
Grid parameters cannot be zero.
/30455 "Round tool requires 'Scallop' tool spacing type"
Round tool requires 'Scallop' tool spacing type
/30409 "'Scallop' Tool spacing type is for round tools only."
'Scallop' Tool spacing type is for round tools only.
/4000 "Tool Selecting"
Tool Selecting
/30686 "Tool is not compatible with station size type"
Tool is not compatible with station size type
/30396 "ON PUNCHED ENTITY"
ON PUNCHED ENTITY
/30283 "Add Die for tool: "
Add Die for tool:
/15167 "RO"
RO
/15168 "RE"
RE
/15169 "SQ"
SQ
/15170 "OB"
OB
/15171 "F"
F
/15172 "CR"
CR
/15173 "SD"
SD
/15174 "DD"
DD
/15175 "B"
B
/15192 "RR"
RR
/15196 "DR"
DR
/15197 "MI"
MI
/30685 "TR"
TR
/30896 "Are you sure you can place %s in Station %d?"
Are you sure you can place %s in Station %d?
/30687 "%s tool type does not support Close To Clamp"
%s tool type does not support Close To Clamp
/30688 "%s tool was selected"
%s tool was selected
/30878 "The tool was renamed. Please note that existing parts (DFT) will continu
e to use the old tool"
The tool was renamed. Please note that existing parts (DFT) will continue to use
the old tool
/30879 "Cannot rename tool"
Cannot rename tool
/30449 "The current station is for round tools only!"
The current station is for round tools only!
/30450 "The selected tool is smaller than the size of the current station!"
The selected tool is smaller than the size of the current station!
/30451 "The selected tool is bigger than the size of the current station!"
The selected tool is bigger than the size of the current station!
/30548 "Horizontal tool should be selected"
Horizontal tool should be selected
/30549 "Vertical tool should be selected"
Vertical tool should be selected
/30552 "Cannot use two technology types at the same time"
Cannot use two technology types at the same time
/31198 "Wrong End Offset"
Wrong End Offset
/31157 "ON SHAPE CENTER"
ON SHAPE CENTER
/31217 "Invalid Microjoint values"
Invalid Microjoint values
/31236 "Allowed Angles"
Allowed Angles
/31237 "Tools Quantity"
Tools Quantity
/6039 "Quit Run (F10)\nQuit Run (F10)"
Quit Run (F10)\nQuit Run (F10)
/489 "Inserts an empty line before the current line\nInsert Line"
Inserts an empty line before the current line\nInsert Line
#Comments: Line => row
/499 "Deletes the current line\nDelete Line"
Deletes the current line\nDelete Line
#Comments: Line => row of NC code
/1757 "Inserts a Pattern command Line\nPattern"
Inserts a Pattern command Line\nPattern
#Comments: Line => row of NC code
/1754 "Delete the current Line\nDelete Line"
Delete the current Line\nDelete Line
#Comments: Line => row of NC code
/1751 "Inserts a Line before the current Line\nInsert Line"
Inserts a Line before the current Line\nInsert Line
#Comments: Line => row of NC code
/1760 "Marks the Punch-Cut that corresponds to the current Line\nMark Punch/Cut"
Marks the Punch-Cut that corresponds to the current Line\nMark Punch/Cut
#Comments: Line => row of NC code
/1802 "Marks the Line that corresponds to the indicated Punch/Cut\nMark Line"
Marks the Line that corresponds to the indicated Punch/Cut\nMark Line
#Comments: Line => row of NC code
/1211 "Machine settings\n Machine settings"
Machine settings\n Machine settings
/30128 "NC to DFT\nNC to DFT"
NC to DFT\nNC to DFT
/1011 "Send NC to a Diskette"
Send NC to a Diskette
/1806 "Enable / disable beep during simulation\nBeep"
Enable / disable beep during simulation\nBeep
/30818 "SimW2006 \nNo Part\nSimw\nCNC Files (*.CNC)\n.CNC\nSimW.Document\nSimW D
ocument"
SimW2006 \nNo Part\nSimw\nCNC Files (*.CNC)\n.CNC\nSimW.Document\nSimW Document
/30897 "AUTOMATIC PART UNLOAD"
AUTOMATIC PART UNLOAD
/30403 "Text Was Not Found"
Text Was Not Found
/30115 "Speed\nSpeed"
Speed\nSpeed
/30116 "Speed\nSpeed"
Speed\nSpeed
/30117 "Job Time\nJob Time"
Job Time\nJob Time
/6037 "Run (F9)\nRun (F9)"
Run (F9)\nRun (F9)
/6038 "Pause (F8)\nPause (F8)"
Pause (F8)\nPause (F8)
/30244 "Find Previous\nFind Previous"
Find Previous\nFind Previous
/30245 "Find Next\nFind Next"
Find Next\nFind Next
/30246 "Search\nSearch"
Search\nSearch
/31244 "Simulator Settings\nSimulator Setting"
Simulator Settings\nSimulator Setting
/30148 "End of entity"
End of entity
/30149 "End of part"
End of part
/30150 "End of sheet"
End of sheet
/30475 "(mm)"
(mm)
/30476 "(inch)"
(inch)
/30690 "A higher version for this application exists. It is recommended that you
close the application and start the newer version."
A higher version for this application exists. It is recommended that you close t
he application and start the newer version.
/30151 "Replacing text..."
Replacing text...
/30152 "The document file is already opened. Report will not be created."
The document file is already opened. Report will not be created.
/30203 "The document file could not be opened. Report will not be created"
The document file could not be opened. Report will not be created
/30204 "Stations table does not exist (table- bookmark may be missing). Report w
ill not be created"
Stations table does not exist (table- bookmark may be missing). Report will not
be created
#Comments: Table => chart
/30205 "Parts table does not exist (table- bookmark may be missing). Report will
not be created"
Parts table does not exist (table- bookmark may be missing). Report will not be
created
#Comments: Table => chart
/30206 "Cannot create the destination file for the report:"
Cannot create the destination file for the report:
/30207 "The file may be opened"
The file may be opened
/30404 "Unknown error occurred during creation of DOC file. The DLL VBUtils.DLL
may not be registered."
Unknown error occurred during creation of DOC file. The DLL VBUtils.DLL may not
be registered.
/30691 "Whole Cut"
Whole Cut
/30692 "Pierce Only"
Pierce Only
/30693 "Entire Sheet"
Entire Sheet
/30694 "Entire Sheet Pierces Only"
Entire Sheet Pierces Only
END String Section
*******************************