Beruflich Dokumente
Kultur Dokumente
Part – ‘D’
a). White.
= 1 No
@Tk. 1953 Each
Item no-2 Supplying, fitting and fixing European type glazed porcelain
Ces-26.1.2 commode ‘S’ type 465x340x415 mm in size , approximately 14
kg by weight, plastic seat cover and preparing the base with
cement concrete and with wire mesh or rods, if necessary in
wall floors including making holes wherever required and
mending good the damages and fitting , fixing finishing etc.
complete with all necessary and connection approved by the
E/ch.
a).Coloured
= 4 Nos
@Tk. 3035 Each
Item no-3 Supplying, fitting and fixing European type glazed porcelain
CEs26.3 Combi closet, 700 x 410 x 795 mm in size, approximately 34.5
kg by weight, plastic seat cover and preparing the base with
cement concrete and with wire mesh or rods if necessary, in all
floors including making holes wherever required and mending
good the damages and fitting, fixing, finishing etc. complete with
all necessary fittings and connection approved and accepted by
the Engineer. (BISF Item No. 118/418 or equivalent)
qty= 1 No
@Tk. 11711 Each
Item no-4 Supplying, fitting and fixing white glazed vitreous W/H Basin
Ces-26.9 580x 445 x235 mm size approx , 14 kg by weight including
fitting, fixing the same in position with heavy type C.I. Brackets,
30 mm dia PVC waste water pipe with brass coupling (not
exceeding 750 mm in length) , basin waste chain plug including
making holes in walls and floors and etc. all complete approved
and accepted by the E/ch.
a). white
G.F= 2 Nos.
F.F= 2 Nos.
2nd F= 1 No.
qty= 5 Nos
@Tk. 1889 Each
Page 1
Item no-5 Supplying, fitting and fixing of 450 x600 mm size and 5mm
Ces-26.18 thick unframed super quality mirror with hard boards at the
back with all necessary fitting including making holes in walls
and mending good the damages with cement mortar ( 1:4) etc.
all complete approved and accepted by the E/ch. (Made in
Japan or equivalent).
a). white
G.F= 2 Nos.
F.F= 2 Nos.
2nd F= 2 No.
qty= 6 Nos
@Tk. 486 Each
Item no-6 Supplying ,fitting and fixing super quality 600x125mm white
Ces-26.21 glass (Plate) shelf having 5mm thickness with fancy cp
brackets, screws and frames including making holes in walls
and mending good the damages with cement mortar ( 1:4) etc.
all complete approved and accepted by the E/ch.
a). white
G.F= 2 Nos.
F.F= 2 Nos.
2nd F= 2 No.
qty= 6 Nos
@Tk. 463 Each
Item no-7 Supplying ,fitting and fixing super quality CP Towel rail of 600
CES-26.22 mm long and 20 mm in dia CP holder making holes in walls and
mending good the damages with cement mortar ( 1:4) etc. all
complete approved and accepted by the E/ch.
G.F= 1 Nos.
F.F= 1 Nos.
2nd F= 2 No.
qty= 4 Nos
@Tk. 463 Each
Item no-8 Supplying, fitting and fixing toilet paper holder of 150 x 150 x
CES-26.24 126 mm size including making holes in walls and mending good
the damages with cement mortar ( 1:4) etc. all complete
approved and accepted by the E/ch.
G.F= 2 Nos.
F.F= 2 Nos.
2nd F= 2 No.
qty= 6 Nos
@Tk. 270 Each
Item no-9 Supplying, fitting and fixing standard size soap tray including
CES-26.26 making holes in walls and mending good the damages with
cement mortar ( 1:4) etc. all complete approved and accepted
by the E/ch.
a). CP soap tray.
G.F= 2 Nos.
F.F= 2 Nos.
2nd F= 2 No.
qty= 6 Nos
@Tk. 149 Each
Item no-10 Supplying, fitting and fixing 125 mm dia stainless steel floor
CES-26.27 grating in traps or in drains including mending holes in walls/
floors and mending good the damages with cement mortar
( 1:4) etc. all complete approved and accepted by the E/ch.
Page 2
G.F= 3 Nos.
F.F= 3 Nos.
2nd F= 2 No.
qty= 8 Nos
@Tk. 118 Each
Item no-11 Supplying 100 mm inside dia best quality uPVC soil waste and
CES-26.36 ventilation pipe having specific gravity 1.3-1.45 wall thickness
3.4-4.0 mm and other physical, chemical,
a) 12 mm QGI union
qty= 12 Nos
@Tk. 90 Each
b). 20mm dia G.I. Union.
qty= 8 Nos
@Tk. 130 Each
c). 25mm dia G.I. Union.
= 4 Nos
= 2 Nos
qty= 6 Nos
@Tk. 192 Each
d) 32 mm G.I union
qty= 4 Nos
@Tk. 215 Each
e) 40 mm Q union
qty= 2 Nos
@Tk. 257 Each
Page 3
Item no-14 Supplying, fitting and fixing best quality G.I. gate valve with
Ces-26.48 sealant etc. complete approved and accepted by the E/ch.
a). White
qty= 5 Nos
@Tk. 2142 Each
Item no-20 Supplying, fitting and fixing of food grade plastic overhead
Ces-26.67 water reservoir tank including all necessary fittings/ hardware
and consumables etc. all complete approved and accepted by
the E/ch.
a). 2000 Liter capacity.
qty= 1 No
@Tk. 24014 Each
Page 4
Item no-21 Construction of masonry inspection pit with 250 mm thick brick
Ces-26.75.2 work in cement mortar ( 1:4) including necessary earth work,
side filling and one layer brick flat soling, 75 mm thick ( 1:3:6)
base, concrete for making invert channel and 12mm thick (1:2)
cement plaster with neat finishing etc. all complete up to a
depth of 700mm approved and accepted by the E/ch.
a). Clear 520 x525 mm and depth 675 to 825 mm average 750
mm for single 225 mm dia R.C.C. pipes and 400 mm pvc pipe.
qty= 3 Nos
@Tk. 3450 Each
b) Master pit of size 600 x 500
qty= 1 No
@Tk. 2590 Each
Item no-22 Construction and placing of R.C.C. inspection pit cover (slab)
Ces-26.76 with supplying and provisions for placing , fitting ,fixing 450 mm
dia C.I. Man hole cover with locking /unlocking arrangement
including concrete (1:2:4) with approx 1% enforcement,
necy.earth cutting or cleaning side, filling curing etc. with
minimum 12mm cement plaster (1:4) and neat cement finishing
on edges and top all complete and accepted by the E/ch.
Page 5
a). 50 users
qty= 1 No
@Tk. 39285 Each
Item no-25 Supplying, fitting and fixing G.I. pipe with all special fittings ,
Ces-26.38.3 such as bends, elbows, socket reducing socket, Tee, Union,
Jam-nuts etc. including cutting trenches where necessary and
fitting the same with earth duly rammed and fixing in walls with
holder bats and making hole in floors, walls and consequent
mending good the damages etc. all complete in respects
approved and accepted by the E/ch.
CEs26.38.3 (A) 12.5 mm dia G.I. pipe with wall thickness 3.25 mm, out side
dia meter min 21.1 mm, weight 1.45kg/m, can with stand min
50 kg cm2 hydraulic pressure.
G.F toilet 1x7’-0’’ = 7’-0’’
1x4’-0’’= 4’-0’’
1x7’-0’’= 7’-0’
1x4’-0’’= 4’-0’’
Rim2x12’-0’’= 24’-0’’
= 46’-0’’
F.F 2x4’-0’ ’= 8’-0’’
1x7’-0’’= 7’-0’’
1x7’-0’’ = 7'-0''
1x7’-0’’=7’-0’’
2x4’-0’’=8’-0’’
Barin 2x12’-0’’ = 24’-0’’
=54’-0’’
2 floor 2x7’-0’’ = 14’-0’’
nd
2x4’-0’’= 8’-0’’
= 22’-0’
= 122’-0’’= 37.18 Rm
@Tk. 223 P/rm
(B) 20 mm dia G.I. pipe with wall thickness 3.25 mm, out side dia
CEs- 26.38.2 meter min 26.6 mm, weight 1.90 kg/m, can with stand min 50
kg cm2 hydraulic pressure.
G.F 3x12’-0’’ = 36’-0’’
F.F 3 x12’-0’’ = 36’-0’’
2x12’-0’’= 24’-0’’
= 96’-0’’ Rft. = 29.25 Rm
@Tk. 292 P/rm
(C) 25 mm dia G.I. pipe with wall thickness 4.05 mm, out side dia
CEs-26.38.3 meter min 33.4 mm, weight 2.97 kg/m, can with stand min 50
kg cm2 hydraulic pressure.
Tank to 2nd floor 1x15’-0’’= 20’-0’’
Tank to F.F 1x25’-0’’= 30’-0’’
Tank to G.F 1x35’-0’’= 40’-0’’
Tank to Tank 1 x 15’-0’’ = 15’-0’’
= 105’-0’’
Suction Pile 1x80’-0’’ = 80’-0’’ rft = 32 Rm
@Tk. 391 P/rm
(D) 32 mm dia G.I. Pipe with wall thickness 4.05 mm,
Ces-26.38.4 outside diameter min 42.1 mm, weight 3.84 kg/m,
can withstand min 50 kg/cm2 hydraulic pressure.
1 x 5’-0’’
1 x 35’-0’’
1 x 20’-0’’
70’-0’’ rft = 21.33 Rm
@Tk. 513 P/rm
Page 6
(E) 40 mm dia G.I. Pipe with wall thickness 4.05 mm,
Ces-26.38.5 outside diameter min 48.0 mm, weight 4.43 kg/m,
can withstand min 50 kg/cm2 hydraulic pressure.
Item no-26 Groove cutting in brick work, R.C.C. floor , including cost for
Ces-26.64 concealing of G.I. pipe work (12 mm and 20mm dia) in brick
wall by cutting groove in wall lintel, beam etc. any means
carefully without damaging the structure and fitting the grooves
with C.C. (4:2:1) after laying of pipe including cost of
scaffolding finishing curing etc. all complete approved and
accepted by the Engineer.
(Ranjan kumer Biswas) (Mohammad Zakir Alam) (Nondita Biswas) (Md. Mijanur Rahman)
Sub-Assistant Engineer Sub-Divisional Engineer Sub-Assistant Engineer Executive Engineer
PWD Sub-Division, PWD Sub-Division, PWD Division, Gopalganj PWD Division, Gopalganj.
Gopalganj Gopalganj
Page 7
Name of work : Details estimate for Construction of Under ground RCC 2000
Gallon capacity water reservoir attached to server station,Gopalganj.
Part – ‘F’
Item no-1 Earth work in excavation in all kinds of soil for foundation
Ces-2.1.4 trenches including layout, providing center lines , local bench-
mark pillars, leveling, ramming and preparing the base, fixing
bamboo spikes and marking layout with chalk power, providing
necessary tools and plants, protecting and maintaining the
trench dry etc. stacking , cleaning the excavated earth at a safe
distance out of the area anclosed by the layout etc. all complete
and accepted by the Engineer. Subject to submit method
statement of carrying out excavation work to the Engineer for
approval . However, Engineer’s approval shall not relieve the
contractor of his responsibilities and obligations under the
contract.
1x16’-0’’x13’-0’’x6”=
104.00 Cft = 2.94 cum
@Tk. 476 P/cum
Item No-3 One layer of brick flat soling in foundation or in floor with first class or
CE,s3.1 picked jhama bricks including preparation of bed and filling the
interstices with local sand leveling etc. complete and accepted by the
E/ch.
1x14’-0’’x11’-0’’ = 154.00 Sft = 14.3 sqm
@Tk. 234 P/sqm
Page 8
Item No-4 Reinforcement concrete works using wooden shutter, with
CE,s7.7.1 minimum cement content to retates to mix 1:1.5:3 strength fc=
25 Mpa at 28 days on standards cylinders as per standard
practies of code ACI/BNB & cement conforming to BDS EN-
197-1 CEM-1 (32.5 to 52.5N) / ASTM-C-150 Type-1,best quality
sand [ 50% quantity of best local sand (F.M. 1.2) and 50%
quantity Sylhet and or coarse sand of equivalent F.M. 2.2) and
20mm down well graded stone chips conforming ASTM C-33
including breaking chips and screening , making , placing
shutter in position and maintaining true to plumb ,making water-
tight properly, placing reinforcement in position ; mixing in
standard mixer machine with hoper fed by standard measuring
boxes , casting in forms, compacting by vibrator machine and
curing at least for 28 days, removing centering-shuttering
including cost of water, electricity, testing and other charges etc.
complete approved and accepted by the E/ch.
Page 9
Item No-5 38mm thick artificial patent stone ( 1:1.5:3) flooring with
CE,s 4.31 cement, best quality coarse sand ( 50% quantity of Sylhet sand
or coarse sand of equivalent F.M. 2.2 and and 50% best local
of FM 1.2) and 12mm down well graded Stone chips, including
breaking chips, screening, laying the concrete in alternate
panels, compacting and finishing the top with neat cement and
curing at least 7 days in all floors including cost of water,
electricity and other charges etc. all complete and and
accepted by the Engineer.
(Cement :CEM-II/A-M).
Floor 1x10’-0’’x7’-0’’ = 70.00 Sft = 6.5 sqm
@Tk. 364 P/sqm
Item No-6 Minimum 12mm thick cement sand (F.M. 1.2) plaster with neat cement
CE,s- 15.2 finishing to plinth wall (1:4) with cement up to 150mm below ground
level with neat cement finishing including washing of sand curing at
least for 7 days , cost of water, electricity and other charges etc. all
complete in all respect as per drawing and accepted by the E/ch.
(Cement : CEM-II/A-M)
Ground floor.
Out side wall
40’-8’’x5’-0’’ = 203.35 Sft
In side wall
34’-0’’x5’-0’’ = 170.00 ,,
373.35 Sft =
= 34.68 sqm
@Tk. 174 P/sqm
Item No-7 Earth filling in foundation trenches and plinth in150 mm layer with earth
CE,s2.13 available within 90 m of the building site minimum dry density of 90%
with optimum moisture content ( Modified proctor test) including
carrying watering, leveling, dressing and compacting to a specified
percentage each layer up to finished level etc. all complete and
accepted by the E/ch.
a). 275-grade deformed bar with minimum fy= 275 MPa & tensile
strength at least 316 MPa : upto ground floor.
Page 10
Supplying, fabrication and fixing to details as per design deformed bar
reinforcement in concrete in accordance with BDS -1313 : 1991
standard including straightening and cleaning rust if any . bending and
binding in position including supply of G.I. wires etc. complete in all
respects and accepted by the E/ch.
a). 275-grade deformed bar with minimum fy= 275 MPa & tensile
strength at least 316 MPa : upto ground floor.
Qnty. BF from item No-4
Base = 4.36 Cum @1% = 3.14 Quintal
Item No- 5 wall = 3.96 Cum @1.50% = 3.92 quintal
Item No-6 Roof slab= 1.43 Cum @1.25% = 1.40 quinal
= 8.46 quintal
@Tk. 6418 P/quintal
Item No-10 Supplying pudlo
(A/R).1 Total casting = 78.98 Kg
@22 bag/ 100 cft = 78.98 bag
@2% pudio = 79 bag
@Tk. 21 P/bag
Analsysis of item No-12
1. Cost of Pudlo= 1 Kg Tk.18/-
Profit 10% Tk. 1/80
Vat 5.5% Tk. 0/99
Tk. 20/79
Say Tk. 21/- Only.
Item No-11 Supplying and laying of single layer polythene sheet weighing
CE,s- 3.7 one kilogram per 6.5 square meter in floor or any where below
cement concrete complete in all respect and accepted by the
Engineer.
1x16’-0’’x13’-0’’=208.00 sft
= 19.32 sqm
@Tk. 24 P/sqm
Sub Total
(Ranjan kumer Biswas) Sub-Divisional Engineer (Nondita Biswas) (Md. Mijanur Rahman)
Sub-Assistant Engineer PWD Sub-Division, Sub-Assistant Engineer Executive Engineer
PWD Sub-Division, Gopalganj PWD Division, Gopalganj PWD Division, Gopalganj
Gopalganj
Page 11
1953
12140
11711
9445
Page 12
2916
2778
1852
1620
894
Page 13
944
27641.6
13252.58
1080
1040
1152
860
514
Page 14
1395
1096
1358
5340
4617
3792
7368
10710
24014
Page 15
10350
2590
4384
86647
Page 16
39285
8291.14
8541
12512
10942.29
Page 17
18921.87
2059.33
1620
3492
426
1364
362908.81
Page 18
2216.99
1399.44
3346.2
Page 19
30951.64
1294.56
28464.48
9675.72
10151.57
2642.85
Page 20
2366
6034.32
348.6
821.25
Page 21
54296.28
1659
463.68
156132.58
Page 22