Sie sind auf Seite 1von 19

PROJECT: PROPOSED SRI SATHYA SAI PRASHANTHINIKETHANAM AT CHIKKABALLAPURA

CLIENT: PRASHANTHI BALAMANDIRA TRUST


ARCHITECTS :SRI SAI SANKALP
CONSULTANTS: JES DESIGN CONSULTANTS
SUBJECT: EXTERNAL ELECTRICAL WORKS

SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

A PART-A HT ELECTRICAL WORKS

NOTE: ESTIMATION FOR TAPPING POINT FROM LOCAL


ELECTRICITY BOARD UPTO PROPOSED 11KV HT M/C IS
NOT CONSIDERED, SAME WILL BE ISSUED BY BESCOM
DURING POWER SANCTION PROCEDUARE)

1.0 11 METER HEIGHT SPUN POLE STRUCTURE


Supply, installation, testing and commissioning of 11KV, 350
MVA, Spun Pole structure for EB incoming & outgoing with 3
sets of 630A, Air Break switch, GOS operating handle, set of
lightning arrestors, set of DOLO Fuses, pin insulators, 0 SWG
Cu.Wires, alkathene tubes, 1 No. of 11M high RCC spun pole,
etc,. Suitable quantity of ACSR overhead coductor and
complete with fixing and mounting accessories such as
50X50X6MS angles, MS supports, nuts and bolts, etc., all
complete as per standard practice and as per Electricity Board
requirement. The rate shall include all civil related works.

Supply: Set 1 -
Erection: Set 1 -

2.0 OUTDOOR TYPE COMBINED HT METERING AND LBS PANEL


Supply, Installation, Testing & Commissioning of Out-door
type, 11kV, HT Metering Cubicle as per Local electricity board
requirement including all CT's,PTs, TOD METERS etc. Suitable
for cable entry on both sides along with 11kV, 3-Phase, 4-wire,
50 Hz, 350 MVA, 1 No. 400A, LBS, with metering, protective
relays for Transformer protection and as per technical
specifications.

Manually charged spring closing mechanism with manual


release.
The GA drawing shall be got approved by local electrical
inspectorate authorities before fabrication. The cubicle shall be
made out of 14 G MS sheet & shall conform to outdoor IP
category classification. The unit shall be mounted on PCC
pedestal, rate shall include the construction of necessary PCC
pedestal.

Supply: Set 1 -
Erection: Set 1 -

Supply, Installation, Testing & Commissioning of 11kV / 433V ,


250 KVA With, CRGO Copper wound, outdoor type
Transformer with OCTC (+5% to -10% step of 2.5%), cable box
3.0 on HT & LT side, oil filled distribution transformer. The rate
shall include the construction of necessary PCC pedestal /
plinth, complete as specified.

Rated output KVA: 250 kVA


Type: Out door oil cooled.
Type of Cooling : ONAN
Type of operation: single
Winding: Copper wound
Impedence: 5% + Tolerance
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

Phase: 3
Frequency: 50 Hz
Connection HV/LV: delta/star
LT Cable box for 2R x 3.5C x 185 Sq.mm AL.XLPE ARMOURD
CABLE
Supply: No. 1 -
Erection: No. 1 -

4.0 HT CABLE AND CABLE END TERMINATION


Supply, Laying, testing and commissioning of 11KV grade,
armoured, aluminium XLPE cable including refilling,
compacting and providing cable route markets at every
junction and turning points.

( Cable length is considered only from Proposed DP/SP


Structure UPTO Transformer)
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

4.1 3Cx95 Sqmm, 11KV, AI, XLPE cable


Supply: Mtrs. 50 -
Erection: Mtrs. 50 -

4.2 Cable End Termination

4.2.1 3Cx95 Sqmm, 11KV, AI, XLPE cable (OUTDOOR TYPE)


Supply: Nos. 2 -
Erection: Nos. 2 -

4.2.2 3Cx95 Sqmm, 11KV, AI, XLPE cable (INDOOR TYPE)


Supply: Nos. 3 -
Erection: Nos. 3 -

5.0 YARD FENCING


Supply & installation of Metal angle fencing all around the HT
Yard & TR Yard using 40 x 40 x 6 mm steel angle vertical
support & Fence height of 2.5Mtrs. high, with lockable gate
including providing concrete foundation for all vertical
supports & raising the level of the yard if necessary and
providing one layer of 40 mm jelly stones, complete and as
required.

Supply: Sqmtrs 30 -
Erection: Sqmtrs 30 -

6.0 CIVIL WORKS RELATED TO ELECTRICAL WORKS

Excavation of cable trenches of 300x750MM including filling,


cushioning and protective covering complete in all respect
6.1 Excavation, providing sand for laying cable, covering with
bricks, refilling & consolidation etc.

Supply: Mtrs 300 -


Laying: Mtrs 300 -

Excavation of cable trenches of 300x600MM including filling,


cushioning and protective covering complete in all respect
6.2 Excavation, providing sand for laying cable, covering with
bricks, refilling & consolidation etc.

Supply: Mtrs 400 -


Laying: Mtrs 400 -

6.3 INSPECTION CHAMBER


Constructing water tight brick masonry Inspection Chamber
with first class bricks in cement mortar 1:6 (1 cement :6 coarse
sand), R.C.C. top slab of 150 mm thick with 1:1.5:3 mix (1
cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size) with CI chamber cover for following size of
trenches with frame.

Foundation concrete 150 mm thick 1:4:8 (1 cement : 4 coarse


sand : 8 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement plaster 1:3 (1 cement : 3
coarse sand) finished with a floating coat of neat cement and
making channel in cement concrete 1:3:6 mix, M.S. foot rests
including fixing in 20 x 20 x 10 cm cement conc. blocks neatly
finished, complete as per standard design and approved
drawings. (Price shall include the cost of excavation, back
filling, disposal of surplus earth dewatering and water proofing
of manholes as directed at site & other associated civil works).

6.3.1 600MMx600MM
Supply: Nos. 4 -
Errection: nos. 4 -

6.3.2 450MMx450MM
Supply: Nos. 8 -
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

Errection: nos. 8 -
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

6.4 HUME PIPES


Supply and installation of following sizes of Hume pipes for
road crossings, paved areas, laying of HT cable etc, including
collars, and misc jointing accessories, digging the trench, back
filling etc, making good the damages. Complete in all respect
as required

6.4.1 150 MM dia Hume pipe


Supply: Mtrs 100 -
Laying: Mtrs 100 -

6.4.2 100 MM dia Hume pipe


Supply: Mtrs 100 -
Laying: Mtrs 100 -

7.0 SERVICE CHARGES


Arranging the required details from Electricity Board duely
making the formalities and arranging service of the installation
with the projected charges and arranging required approval
from the required government Electrical Inspectorate and
permission for the energizing the HT installation works. Also
this item should include charges towards arranging temporary
power supply for construction and making payments, monthly
bills and renewal/upgrading temporary power supply. The
total Estimated Load approximately 130KVA

L/S 1 -

B PART-B LT ELECTRICAL WORKS

1.0 LT PANELS
Design, manufacture, supplying, fixing in position, testing and
commissioning of following Indoor and Outdoors MV
switchgear panels made up of 14/16G, suitable for 415 V, 3
phase, 4 wire, 50 Hz power distribution system. The incoming
and outgoing feeders shall be accommodated in a modular
multitier arrangement and shall be interlocked to avoid
paralleling, adequate size cable alley, painting, earthing,
numbering, danger plate etc as required as per specifications
and drawings. The panels should be with all items as per SLD
and Specification.

1.1 MAIN LT KIOSK (OUTDOOR TYPE-IP55) - EXTENDABLE TYPE


Supply : No. 1 -
Erection : No. 1 -
INDOOR TYPE PANELS-IP-42
1.2 MAIN EB, DG CHANGE OVER PANEL
Supply : No. 1 -
Erection : No. 1 -

1.3 90KVA CAPACITOR PANEL


Supply : No. 1 -
Erection : No. 1 -

1.4 COMMON SERVICE PANEL


Supply : No. 1 -
Erection : No. 1 -

1.5 EXTERNAL LIGHTING DB


Supply : No. 1 -
Erection : No. 1 -

2.0 DISTRIBUTION BOARDS


SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

Supply, Installation, Testing, Erection and commissioning of


Double Door Distribution boards, floor/wall mounted including
transportation to site of erection, unpacking, assembling
including transportation from owner's store / yard to site of
erection, unpacking, assembly, installation on foundations or
fixing to wall or steel structures, aligning, leveling, grouting,
testing and calibration of relays and meters etc. including all
labour and materials complete as per specifications of this
tender. Bus bars of 125A rating with electrolytic grade copper
for phase, neutral & earth as required.

4 WAY TPN MCB distribution board with 1 No. 25A, 4P,


2.1 ELCB,100mA as Incomer, 12 Nos. 10A, SP, MCBs as Outgoings.
(For electrical room and TR Yard lighing)
Supply and Erection : Nos. 1 -

3.0 POINT WIRING WITH MODULAR SWITCHES


Supply, Installation, Testing & Commissioning of light points,
5A socket outlets, exhaust fan points using necessary materials
like 25mm dia PVC Conduit & other conduit accessories, Circuit
main 2R x 1.5 +1R x 1.5 Sqmm FRLS category & insulated
MSCC wires, 16G GI box and other point wiring accessories &
carrying out surface / concealed wiring. The rate shall include
earthing of all points. The quoted rates shall also include PVC
coated metal flexible & all accessories, tools, labour etc. No
separate payment will be made for wall chasing, cleaning of
debris, rough plastering the chased wall / floor. The rate shall
include looping between points. The wiring size is limited to
lighting circuits (Max.800W) & 5A power outlets in point wiring
limited to 200W per socket outlet & looped to a max.of 4
outlets. All accessories shall be IS approved.

Chipping in wall for installation of conduits, putting JBs/DBs in


wall, taking cable in wall, chipping to be carried out within
precast bricks / blocks etc. after installation, doing proper
plastering with cement and complete the job in accordance
with direction of engineer in charge.

Special notes for quoting point wiring :


i) Make of switches as per approved list.
ii) The max. nos. of points that may be considered for one
circuit shall be eight points or less such that connected load is
equal to or less than 800 watts.
iii) The rate shall include looping between
switch/socket/Exhaust fan/light points etc. 2 X 1.5 + 1 X 1.5
SQMM MSCC PVC Insulated wires.
iv) The rate shall be worked out considering the average ceiling
height of 4.5 mtrs high. However, it is the responsibility of the
contractor to ensure that all building parameters, including
height, possible length of wiring required in accordance with
point wiring is assessed & included in the rate. No extra claims
will be entertained on this account.

3.1 One light point controlled by a 6A switch


Supply & Wiring : Nos 5 -

6A, 3 pin, receptacle controlled by 6A switch located near light


3.2 switch control. (half point)
Supply and Wiring : Nos 2 -

6A 3 pin receptacle controlled by 6A switch located


3.3 independently (full point)
Supply and Wiring : Nos 2 -
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

4.0 POWER RECEPTACLE:


Supply, installation, testing & commissioning of the following
power receptacle housed in M.S. box and covered with original
switch plate. Wiring for these items are separately covered
elsewhere in the tender.

Supply & fixing of 6/16A, 6 pin, commercial type switched


socket outlet with indicator , M.S.box, cover plate and all
wiring accessories including interconnection etc., complete.
4.1 The box shall be flush/surface mounted on wall as required.
(Raw power Sockets)

Supply & Fixing : Nos 5 -

5.0 LIGHTING & POWER CIRCUIT WIRING


Supply, drawing & of power wiring circuit using MSCC 1100V,
PVC, insulated FRLS wires drawn in 2mm thick PVC conduits
using necessary wiring & conduit accessories including
termination. The rate shall include running of PVC insulated
copper conductor earth wire as specified.The rate shall also
include cost of Terminations with proper size of lugs, draw box
if required, properly painted & with screwed front cover.

2R X 2.5 + 1 X 1.5 SQMM MSCC PVC insulated FRLS wires


5.1 drawn in Existing 25mm dia PVC conduit/Tray . (For lighting
circuits and power circuits) Rmtrs 20 -

4R X 6.0 + 1 X 4 SQMM MSCC PVC insulated wires drawn in


5.2 Existing 32mm dia PVC conduit/Tray. (For lighting DB
Incoming) Rmtrs 25 -

6.0 L.T. CABLES


Supply and Laying of 1100 V grade, PVC / XLPE insulated
Aluminium / Copper conductor steel wire armoured power
cable. The cable shall be laid on cable trays,Pipes, structural
supports and cable supports provided. The cables shall be
clamped at regular intervals using clamps and fasteners for
proper laying. (Refer SLD) for cable details.

The below mentioned cables are Aluminium Armourd XLPE


Cables.

6.1 3.5C x 240 Sq.mm AL.AR.XLPE CABLE


Supply: Mtrs. 120 -
Laying: Mtrs. 120 -

6.2 3.5C x 185 Sq.mm AL.AR.XLPE CABLE


Supply: Mtrs. 60 -
Laying: Mtrs. 60 -

6.3 3.5C x 70 Sq.mm AL.AR.XLPE CABLE


Supply: Mtrs. 100 -
Laying: Mtrs. 100 -

6.4 3.5C x 50 Sq.mm AL.AR.XLPE CABLE


Supply: Mtrs. 150 -
Laying: Mtrs. 150 -

6.5 4C x 10 Sq.mm AL.AR.XLPE CABLE


Supply: Mtrs. 75 -
Laying: Mtrs. 75 -

The below mentioned cables are Copper Armourd cables


6.6 4C x 6 Sq.mm CU.AR.XLPE CABLE
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

Supply: Mtrs. 100 -


Laying: Mtrs. 100 -

6.7 3C x 4 Sq.mm CU.AR.XLPE CABLE


Supply: Mtrs. 100 -
Laying: Mtrs. 100 -

The below mentioned cables are Copper Control Armourd


cables

6.8 4C x 2.5 Sq.mm CU.AR.XLPE CABLE


Supply: Mtrs. 50 -
Laying: Mtrs. 50 -
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

7.0 CABLE END TERMINATION :


Supplying and making and termination with tinned COPPER
lugs including cutting, stripping of cable insulation, providing
double compression type glands, terminals, & armour
earthing, Gland Earthing, crimping the lug on to the conductor,
clamping of the cable-cores, marking with wire number
ferrules, etc. and including all labour and materials complete
and as per specifications of this tender and directions of
Engineer-in-charge for the following size of PVC insulated and
PVC sheated/XLPE Aluminium/Copper conductor cable of 1.1
KV grade .

7.1 3.5C x 240 Sq.mm


Supply & Termination: Nos. 2 -

7.2 3.5C x 185 Sq.mm


Supply & Termination: Nos. 4 -

7.3 3.5C x 70 Sq.mm


Supply & Termination: Nos. 2 -

7.4 3.5C x 50 Sq.mm


Supply & Termination: Nos. 2 -

7.5 4C x 10 Sq.mm
Supply & Termination: Nos. 4 -

7.6 4C x 6 Sq.mm
Supply & Termination: Nos. 20 -

7.7 3C x 4 Sq.mm
Supply & Termination: Nos. 30 -

7.8 4C x 2.5 Sq.mm


Supply & Termination: Nos. 4 -

8.0 CABLE TRAY


Supply and erection of Cable Tray as per specification
mentioned in the tender document.
The rate shall include supply & fixing of MS Grip bolts in
columns/beams/walls/ceiling etc.as required & including
drilling also.
The rate will include all required bends, tees, vertical up &
downs, radius bends and other applicable accessories shall be
factory fabricated, complete & as required.

300mmx50mm Wide GI ladder type cable tray with 1no.


8.1 25x3mm flat at every 300mm using12 mm threaded Rods.
Supply & Laying : Mtrs 15 -
SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

9.0 PVC CONDUITS


FOR ELECTRICAL AND ALLIED WORKS
Supply and laying of following sizes of 2 mm thick PVC conduit
with conduit accessories like bends, collars, junction boxes,
clamps, etc., The conduit shall be embedded in
floor/roof/wall, including floor chipping

9.1 25mm dia conduit Rmtrs 100 -

10.0 EARTHING
Supply and installation of 40 mm dia, 3mm thick GI
pipe/copper plate electrode earth station conforming to IS
3043-1987/NEC/IEE complete with brick masonry chamber, CI
cover, GI watering funnel with 20G GI wire mesh etc., The CI
cover frame/ chamber shall be of 450mm x 450mm x 300mm
size. CI manhole cover with frame shall be painted with
bitumastic paint, identification of earth pit with yellow paint
below the chamber cover, mixtures of charcoal & common salt
around electrode including digging of pit upto permanent
moisture level but not less than 3 mtr depth and back filling.

Supply, Erection, Testing & Commissioning of G.I. Electrode


10.1 earth station complete with civil works etc. as per specification.

Supply & Erection: Nos. 10 -

Supply, Erection, Testing & Commissioning of Cu. plate


10.2 (600x600 plate) earth station complete with civil works etc. as
per specification.
Supply & Erection: Nos. 4 -

CHEMICAL EARTHING
Supply,Installation,Testing & Commissioning of GEM (GROUND
EARTHING MATERIAL) Earthing as per the NFC 17-102 Standard
10.3 (French National Federation) also as per the given specification
& drawing

Supply & Erection: Nos. R0

11.0 EARTHING CONDUCTORS


Supply and running of the below listed sizes of G.I.Tape / Wire
as earth leads being clamped to wall/floor/cable trenches etc.,
as required.

11.1 25 x 5 mm GI Strip
Supply & Laying : Rmtrs. 100 -
11.2 25 x 5 mm Copper Strip
Supply & Laying : Rmtrs. 60 -

12.0 STRUCTURAL STEEL


Supply, Fabrication, Erection & including 2 coats of red oxide
primer & 2 coats of approved enamel paint of Steel items
including all channels, suspension supports, steel plate, anchor
bolts, cross angles, brackets & Supports for light fixtures if
required etc. including grouting, welding, tools, tackles as
required etc. The payment shall be made for the actual
quantities measured. This item shall be operated for cable
trenches, panel, DB base frames, chequered plate supports in
trench, vertical tray supports etc.

Supply & Erection: Metric ton. 0.2 -

13.0 FIRE FIGHTING ACESSORIES


SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE AMOUNT IN Rs.

Supply and erection of following safety items for 1.1 kV as


required by approving authorities. The quality / make shall be
approved by Consultants/Owner before procurement.

11 kV, Rubber mats of 20mm thick, 900 mm wide, in front of


electrical panels, wherever required and in accordance with
directions of engineer in charge at site.Colour of the Mats will
be Black only = 25 mtrs.

Danger boards = 1 No.


No admission boards = 1 No.
4.5 Kg CO2 Extinguishers = 2 Nos.
Shock treatment charts with teak wood frame and glass = 1 No.

First aid box = 1 No.


Rubber Gloves = 2 Sets
Supply & Errection: SET 1.0 -

14.0 INSTALLATION OF LIGHT FIXTURES.


Installation, Testing and commissioning light fixtures, ceiling
fan and fire extinguishers with all necessary labour works.

Installation of 1NO. X 20W, LED, 4feet, Tube light fixture


14.1 Surface mounted type including Drivers , with all necessary
accessories.
Installation: Nos. 4.0 -

Installation of 11W 0.8m Height LED bollard light, complete


14.2 with alla accessories.
Installation: Nos. 10.0 -

Installation of 42 W post top lattern LED with in 3 Mtr Pole


14.3 MS/GI Pole, complete with all accessories.
Installation: Nos. 15.0 -

Erection of..... Mtrs long hot dip Galvanized Octagonal pole


with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062
for base plate with door opening arrangements, including
suitable boards, bakelite sheet and termination box as per IS
specifications suitable to withstand the wind speed of
180kmph for .......Mtrs pole having dimensions bottom ....mm
14.4 with 3/4mm thick, suitable base plate and 4 nos of...long J
bolts along with template and the pole shall be galvanized with
not less than 65micron etc., ( With out foundation-for
foundation details refer prevaling Civil SR)

a) 4 Mtr Height (bottom dia 130mm, top dia 70mm, 3mm thick;
size of base plate 220mmx220X12mm; 4nos M20x700mm long
'J' bolts and nuts)
Installation: Nos. 15.0 -

TOTAL PART A, B & C External, Intrernal and Installation of Lighting fixture Works -
PROJECT: PROPOSED SRI SATHYA SAI PRASHANTHINIKETHANAM AT CHIKKABALLAPURA
CLIENT: PRASHANTHI BALAMANDIRA TRUST
ARCHITECTS :SRI SAI SANKALP
CONSULTANTS: JES DESIGN CONSULTANTS
SUBJECT: SUPPLY OF LIGHTS

SL. NO. DESCRIPTION OF WORKS UNIT QTY RATE

1.0 SUPPLY OF LIGHT FIXTURES


Supply of light fixtures, ceiling fan and fire extinguishers with all
necessary Transport and delivery to site.

Supply of 1NO. X 20W, LED, 4feet, Tube light fixture Surface


1.1 mounted type including Drivers , with all necessary accessories.

Supply: Nos. 4.0

Supply of 11W 0.8m Height LED bollard light, complete with alla
1.2 accessories.
Supply: Nos. 10.0

Supply of 42 W post top lattern LED with in 3 Mtr Pole MS/GI Pole,
1.3 complete with all accessories.
Supply: Nos. 15.0

Erection of..... Mtrs long hot dip Galvanized Octagonal pole with
BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base
plate with door opening arrangements, including suitable boards,
bakelite sheet and termination box as per IS specifications suitable
to withstand the wind speed of 180kmph for .......Mtrs pole having
dimensions bottom ....mm with 3/4mm thick, suitable base plate and
1.4 4 nos of...long J bolts along with template and the pole shall be
galvanized with not less than 65micron etc., ( With out foundation-
for foundation details refer prevaling Civil SR)

a) 4 Mtr Height (bottom dia 130mm, top dia 70mm, 3mm thick; size
of base plate 220mmx220X12mm; 4nos M20x700mm long 'J' bolts
and nuts)
Supply: Nos. 15.0

TOTAL SUPPLY OF LIGHT FIXTURES


AMOUNT IN Rs.

-
PROJECT: PROPOSED SRI SATHYA SAI PRASHANTHINIKETHANAM AT CHIKKABALLAPURA
CLIENT: PRASHANTHI BALAMANDIRA TRUST
ARCHITECTS :SRI SAI SANKALP
CONSULTANTS: JES DESIGN CONSULTANTS
SUBJECT: EXTERNAL SUMMARY

SL. NO. DESCRIPTION

1.0 TOTAL EXTERNAL ELECTRICAL WORKS

2.0 TOTAL OF INTERNAL AND EXTERNAL LIGHT FIXTURES

GRAND TOTAL

EXCLUSION
A) 2MMD DEPOSIT
B) TAPPING POINT CONNECTION WORKS FROM THE BESCOM GRID TO SITE PREMISES
C) DG SET, AMF PANEL AND ACCESSORIES.
KABALLAPURA

AMOUNT IN Rs.

GRID TO SITE PREMISES


LIST OF MAKE FOR THE ELECTRICAL WORKS

SL.NO. DESCRIPTION
1 MCCB

2 L.T. CABLES

3 SOLDERLESS CRIMPING LUGS

4 CABLE GLANDS

5 MINIATURE CIRCUIT BREAKERS 10kA

6 ELCB / ELMCB

7 MCB DISTRIBUTION BOARDS

8 PVC INSULATED COPPER WIRES (MSCC) '1100


VOLTS FRLS GRADE ONLY

9
PVC RIGID CONDUIT & ACCESSORIES '2MM THICK

10 SWITCHES & SOCKETS

11 CEILING ROSES AND ACCESSORIES

12 DEEP JUNCTION BOX

13 GI / MS BOXES

14 CONTACTORS

15 DIGITAL TYPE VOLTMETER / AMETER

16 CTS/PTS

17 ELR WITH CBCT

18 DIGITAL LOAD MANAGER / MDM

19 INDICATING LAMPS, PUSH BUTTONS

20 LIGHT FIXTURES

LT PANELS
21

22 TRANSFORMER

23 HT PANELS
Note:
1.0 Contractor should indicate the Make which they have considered for Estimation.
2.0 In Case, Client's wish to execute with the different make which is not indicated in the above approved makes, if
any Addition or Deletion in the amount, contractor should take the approval from Client or Consultants before
start the execution.
MAKE FOR THE ELECTRICAL WORKS

MAKES
INDOASIAN / C & S / LEGRAND / HPL

KEI / HAVELLS / POLYCAB

DOWELLS / JOHNSON

DOWELLS / JOHNSON

INDOASIAN / C & S / LEGRAND / HPL

INDOASIAN / C & S / LEGRAND / HPL

INDOASIAN / C & S / LEGRAND / HPL

WALNA / FINOLEX / HAVELLS

NATIONAL PIPES / NELCO / INDO PLAST

LEGRAND Mosic/ SCHINDER opel / ANCHOR ROMA

SAME AS SWITCH MAKE

SAME AS SWITCH MAKE

SAME AS SWITCH MAKE

C & S / HPL SOCOMAC

HPL / ELEMEASURE

KAPPA / KALPA

ELEMEASURE / PROC DEVICE

HPL / ELEMEASURE

TECHNIC / SOLZER / C&S

SYSKA / HAVELLS / HPL / BAJAJ / ENERSAVE

LAKSHMI POWER GEAR / IMPERIAL / KPS CONTROL / RADIANT


SWITCHGEAR / VICTORY SWITCHGEAR

SHREE SAI POWER / UNI POWER / KAMATH

VYOMA / VENKATESHWARA / STAR SWITCHGEAR


which they have considered for Estimation.
the different make which is not indicated in the above approved makes, if
unt, contractor should take the approval from Client or Consultants before

Das könnte Ihnen auch gefallen