Sie sind auf Seite 1von 35

crw-rw-rw- 1 root tty 3, 146 Jun 15 2011 ttyy2

crw-rw-rw- 1 root tty 3, 147 Jun 15 2011 ttyy3


crw-rw-rw- 1 root tty 3, 148 Jun 15 2011 ttyy4
crw-rw-rw- 1 root tty 3, 149 Jun 15 2011 ttyy5
crw-rw-rw- 1 root tty 3, 150 Jun 15 2011 ttyy6
crw-rw-rw- 1 root tty 3, 151 Jun 15 2011 ttyy7
crw-rw-rw- 1 root tty 3, 152 Jun 15 2011 ttyy8
crw-rw-rw- 1 root tty 3, 153 Jun 15 2011 ttyy9
crw-rw-rw- 1 root tty 3, 154 Jun 15 2011 ttyya
crw-rw-rw- 1 root tty 3, 155 Jun 15 2011 ttyyb
crw-rw-rw- 1 root tty 3, 156 Jun 15 2011 ttyyc
crw-rw-rw- 1 root tty 3, 157 Jun 15 2011 ttyyd
crw-rw-rw- 1 root tty 3, 158 Jun 15 2011 ttyye
crw-rw-rw- 1 root tty 3, 159 Jun 15 2011 ttyyf
crw-rw-rw- 1 root tty 3, 160 Jun 15 2011 ttyz0
crw-rw-rw- 1 root tty 3, 161 Jun 15 2011 ttyz1
crw-rw-rw- 1 root tty 3, 162 Jun 15 2011 ttyz2
crw-rw-rw- 1 root tty 3, 163 Jun 15 2011 ttyz3
crw-rw-rw- 1 root tty 3, 164 Jun 15 2011 ttyz4
crw-rw-rw- 1 root tty 3, 165 Jun 15 2011 ttyz5
crw-rw-rw- 1 root tty 3, 166 Jun 15 2011 ttyz6
crw-rw-rw- 1 root tty 3, 167 Jun 15 2011 ttyz7
crw-rw-rw- 1 root tty 3, 168 Jun 15 2011 ttyz8
crw-rw-rw- 1 root tty 3, 169 Jun 15 2011 ttyz9
crw-rw-rw- 1 root tty 3, 170 Jun 15 2011 ttyza
crw-rw-rw- 1 root tty 3, 171 Jun 15 2011 ttyzb
crw-rw-rw- 1 root tty 3, 172 Jun 15 2011 ttyzc
crw-rw-rw- 1 root tty 3, 173 Jun 15 2011 ttyzd
crw-rw-rw- 1 root tty 3, 174 Jun 15 2011 ttyze
crw-rw-rw- 1 root tty 3, 175 Jun 15 2011 ttyzf
crw-r--r-- 1 root root 233, 35 Aug 13 2015 tx-hpq
crw-r--r-- 1 root root 1, 9 Jan 1 00:00 urandom
crw-rw-rw- 1 root root 1, 5 Jun 15 2011 zero
/dev # cd /
/ # cd etc
/etc # ls
adduser.conf inetd.conf network rc6.d
build-lable init.d nsswitch.conf rcS.d
default inittab passwd resolv.conf
deluser.conf issue profile rhosts.deny
fstab issue.net protocols security
group limits rc.boot services
host.conf locale.alias rc0.d shadow
hostname login.access rc1.d shadow-
hosts login.defs rc2.d shadow.factory
hosts.equiv modules.conf rc3.d ssh
idirect motd rc4.d sysctl.conf
idirect-release mtab rc5.d syslog.conf
/etc # cd idirect
/etc/idirect # ls
certs falcon
certs_sha512 zImage_source_md5sum
/etc/idirect # cd certs
/etc/idirect/certs # ls
x509_local_cert.txt x509_local_key.txt
/etc/idirect/certs # cat x509_local_cert.txt
==0010==

1
1
981
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
/etc/idirect/certs # cat x509_local_key.txt
==0010==

1
1
1675
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
/etc/idirect/certs # cd /
/ # ls
bin etc mnt pkg root stage tmp var
dev lib opt proc sbin sys usr
/ # cd etc
/etc # ls
adduser.conf inetd.conf network rc6.d
build-lable init.d nsswitch.conf rcS.d
default inittab passwd resolv.conf
deluser.conf issue profile rhosts.deny
fstab issue.net protocols security
group limits rc.boot services
host.conf locale.alias rc0.d shadow
hostname login.access rc1.d shadow-
hosts login.defs rc2.d shadow.factory
hosts.equiv modules.conf rc3.d ssh
idirect motd rc4.d sysctl.conf
idirect-release mtab rc5.d syslog.conf
/etc # cat shadow
root:$1$/Te8dK$mh4WlYX4dEIPgycj9gE7e.:12538:0:99999:7:::
bin:*:12538:0:99999:7:::
daemon:*:12538:0:99999:7:::
lp:*:12538:0:99999:7:::
nobody:*:12538:0:99999:7:::
sshd:!!:12538:0:99999:7:::
admin::1:0:99999:7:::
/etc # cd rc0.d
/etc/rc0.d # ls
K20sshd K30syslog S30urandom S40umountfs
K22idirect_falcon S20sendsigs S31umountnfs.sh S90halt
/etc/rc0.d # cat K30syslog
#! /bin/sh
# /etc/init.d/sysklogd: start system and kernel log daemons.
#
# chkconfig: 2345 10 90
#
PATH=/bin:/usr/bin:/sbin:/usr/sbin

test -f /sbin/klogd || exit 0


test -f /sbin/syslogd || exit 0

# Options for start/restart the daemons


# For remote UDP logging use SYSLOGD="-r"
#
SYSLOGD=""

# Use KLOGD="-k /boot/System.map-$(uname -r)" to specify System.map


#
KLOGD=""

case "$1" in
start)
echo -n "Starting system log daemon: syslogd"
start-stop-daemon --start --quiet --exec /sbin/syslogd -- -m 0
echo -n " klogd"
start-stop-daemon --start --quiet --exec /sbin/klogd
echo "."
;;
stop)
echo -n "Stopping system log daemon: klogd"
start-stop-daemon --stop --quiet --exec /sbin/klogd
echo -n " syslogd"
start-stop-daemon --stop --quiet --exec /sbin/syslogd
echo "."
;;
reload|force-reload)
start-stop-daemon --stop --quiet --signal 1 --pidfile /var/run/syslogd.pid
;;
restart)
echo -n "Stopping system log daemon: klogd"
start-stop-daemon --stop --quiet --exec /sbin/klogd
echo " syslogd"
start-stop-daemon --stop --quiet --exec /sbin/syslogd
sleep 1
echo -n "Starting system log daemon: syslogd"
start-stop-daemon --start --quiet --exec /sbin/syslogd -- -m 0
echo -n " klogd"
start-stop-daemon --start --quiet --exec /sbin/klogd
echo "."
;;
*)
echo "Usage: /etc/init.d/sysklogd {start|stop|reload|restart|force-reload}"
exit 1
esac

exit 0
/etc/rc0.d # cd /
/ # reboot
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signaHangup
/bin/sh: cannot set tty process group (Inappropriate ioctl for device)
[1] + Hangup sh --version
/ # Stopping OpenBSD Secure Shell server: sshd.
Stopping falcon_monitor: [Not Running]
Stopping falcon: [Not Running]
Stopping system log daemon: klogd syslogd.
Sending all processes the TERM signal... done.
Sending all processes the KILL signal... done.
Saving random seed... done.
Unmounting remote filesystems... done.
Unmounting local filesystems... done.
mount: cannot read /proc/mounts: No such file or directory
Rebooting... flushing ide devices:
Restarting system.
DRAM Test ................
DRAM Test Successful
+Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]


release, version "iDirect 1.1" - built 12:55:42, Jun 15 2011

Platform: iDirect iDS Platform (XScale)


Copyright (C) 2004, 2005 iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available


FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
== Executing boot script in 5.000 seconds - Press <Space Bar> to abort
RedBoot> fis load Linux
RedBoot> exec
Using base address 0x01600000 and length 0x00100000
Uncompressing
Linux................................................................... done,
booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed
Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS1,9600 root=/dev/mtdblock2
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62564KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force
read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.85 booting
Calculating module dependencies... done.
Loading modules: ixp0 Note: /etc/modules.conf is more recent than
/lib/modules/2.4.24-uc0-iDirect0/modules.dep
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/char/ds2430a.o
will taint the kernel: non-GPL license - copyright iDirect Technologies- 2004
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ds2430a loaded, with warnings
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/ixp400/ixp400.o
will taint the kernel: no license
Module init.
Module ixp400 loaded, with warnings
Warning: loading /lib/modules/2.ixp425_eth:
4.24-uc0-iDirect0/kernel/drivers/net/ixp425_eth.o will taint theInitializing IXP425
NPE Ethernet driver software v. 0.1.9 (1_4)
kernel: non-GPL license - Copyright (c) Intel Corporation. 2002-2003
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 266 MHz
Module ixp425_eth loaded, with warnings
ixp1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-10-200 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-
uc0-iDirect0/modulesTx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base =
0x52008000
.dep
modprobe: Can't locate module char-major-10-200
char-majofpga: Apr 21 2015 20:00:44
r-233 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
cpld: Apr 21 2015 20:00:42
char-major-232 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-232-0 Note: rawio: Apr 21 2015 20:00:56
/etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-iDirect0/modules.dep
char-major-231 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-254 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep

Mounting local filesystems...


Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Cleaning: /tmp /var/lock /var/run.
net.ipv4.ip_forward = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.rp_filter = 1
INIT: Entering runlevel: 2
Starting system log daemon: syslogd klogd.
Starting OpenBSD Secure Shell server: sshdCould not load host key:
/etc/ssh/ssh_host_ecdsa_key
Could not load host key: /etc/ssh/ssh_host_ed25519_key
.
Starting falcon:Using OpenSSL 1.0.1j-fips 15 Oct 2014
Starting Falcon...
initialize system clock to Sat Dec 8 20:16:15 2018
ACC key file was not found but hub/remote can be running in NON-FIPS or NON-TRANSEC
mode
Darwin Remote CreateDarwinMdmCtrl
/usr/sbin/load_fpgas_remote.sh nomesh 0 0 0 0 ss_disable tx_ss_disable dvbs2 1 x
idirect_tdma
Tx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base = 0x52008000
fpga: Apr 21 2015 20:00:44
i2c-dev.o: Registered 'FPGA-I2C Adapter' as minor 0
i2c-core.o: adapter FPGA-I2C Adapter registered as adapter 0.
i2c-opencore: __DATE__ __TIME__
i2c-core.o: driver stv0900 registered.
i2c-core.o: client [stv0900] registered to adapter [FPGA-I2C Adapter](pos. 0).
stv0900: Apr 21 2015 20:00:57
i2c-core.o: driver stb6100 registered.
i2c-core.o: client [stb6100] registered to adapter [FPGA-I2C Adapter](pos. 1).
stb6100: Apr 21 2015 20:00:57
CurstomerCert::LoadFromDisk(): no TRUSTED cert,
fpga_open function 237 line num
PCI: enabling device 00:0e.0 (0000 -> 0002)

fpga_dma_alloc_burst_event_pages function 252 line num bep_pages_virt_addr =


0xc6e1d000

fpga_dma_alloc_burst_event_pages function 253 line num bep_page0_dma_addr =


0x1c60000

fpga_dma_alloc_burst_event_pages function 254 line num bep_page1_dma_addr =


0x1c64008

fpga_dma_alloc_burst_event_pages function 255 line num bep_page2_dma_addr =


0x1c68010

fpga_dma_alloc_burst_event_pages function 256 line num bep_page3_dma_addr =


0x1c6c018

fpga_dma_alloc_burst_event_pages function 262 line num physical_address = 0x1c60000


fpga: probe
Bus 0, device 14, function 0: (id: 1172-0001)
noname
Memory: 0x4B000000-0x4B003FFF.
IRQ: 26
*** remote.cpp:Init:290 m_l2_mode = 229

L2 Mode of Operation [False]


ExtIntf Reload DarwinBoardCalibration new successful>>>>>>>>>

mod_error : 1.315000
Loaded board Calibration
OduCtrl::Reload(16) m_i_am_rx=0 m_i_am_tx=1
OduCtrl::Reload(16) is_standby=0
OduCtrl::Reload(16) odu_tx_dc_power=1
OduCtrl::Reload(16) odu_tx_10_mhz=1
OduCtrl::Reload(16) odu_tx_27_mhz=0
OduCtrl::SetTxDC(16) on=1
Unknown DDS Device
Band = 0 phase =0xFFFFFC98 gain = 0x000040A7
REG1 = 0x0000 REG2=0x0001 REG3=0x257E REG4=0x0073 Clock = 10000000l
Frame length = 125
Frame length = 125
Unknown DDS Device
Band = 0 phase =0xFFFFFC98 gain = 0x000040A7
REG1 = 0x0000 REG2=0x0001 REG3=0x257E REG4=0x0073 Clock = 10000000l
OduCtrl::Reload(32) m_i_am_rx=1 m_i_am_tx=0
OduCtrl::Reload(32) is_standby=0
OduCtrl::Reloadfpga_open function 237 line num
(32) odu_rx_dc_power=1
OduCtrl::Reload(32) odu_rx_10_mhz=1
OduCtrl::Reload(32) force_mux_on=0
Checking SSRAM test complete...
SSRAM test completed: WO[passed] A2D[passed]

Loading Griffin image =Fpga_evolx3_TxRx_3C40_06


Griffin Program -- Success
***** STV0900: Detected chip id 0x20 *****
mlband 1020000000
dvbs2 mode
cal
vco[0x7c]ni[0x4b]nf[0x1c]k[0x3d]g[0x3c]f[0xd6]dlb[0xdc]t1[0x8f]fcck[0xd]lpen[0xfb]t
3[0xde]
prg
lock[0x81]vco[0x7c]ni[0x4b]nf[0x1c]k[0x3d]g[0x3c]f[0xd6]dlb[0xdc]t1[0x8f]fcck[0xd]l
pen[0xfb]t2[0xde]
Actual Freq = 1020.0000 MHz Programmed LO = 1019.9883 MHz lpf = 27 MHz nco =
11718 Hz
***** STV0900: Detected chip id 0x20 *****
Fan monitoring is disabled for this remotefpga_open function 237 line num

fpga_open function 322 line num


fpga_rcs_mac_ioctl function 115 line num
fpga_rcs_mac_mmap function 143 line num
BurstEventCtrl::ConfigureDevice pa[0x1c60000] bep0[0x4109f000] bep1[0x410a3008]
bep2[0x410a7010]ixp425_eth: ixp0: Entering promiscuous mode
bep3[0x410ab018]
bool iDirect::BurstEventCtrl::Reload(const Opdevice ixp0 entered promiscuous mode
tions*)::212
Tx Muted:Waiting for NCR-10M fll to lock
Skip slot time 40500 ncr ticks (btpReq 405000)
GdCompMonitorDevice ActivateTimer

modem_control reload returns with return value of: 1


fp[0] ft[0] wt[0]
fp[82] ft[88] wt[0]
SyncEth0: updated system config file "/etc/network/infpga_open function 237 line
num
terfaces"
Using conventional reads
Ifname: ixp0 Ifindex: 65632fpga_open function 237 line num
MAC: 00:60:43:62:d6:7a
route: ioctl 0x890c failed: No such profpga_open function 237 line num
cess
UnixControl::Reload: /sbin/route add -net 0.0.0.0 netmask fpga_open function 237
line num
0.0.0.0 gw 10.11.45.201 tun0 < /dev/null

Version of the map fpga_open function 237 line num


client 1PowerMgmt Reload m_evt =64
fpga_open function 237 line num
SetMcastCtrl(Channel = 0, Mask = ffe0)
Interface: ixp0, PhyCount: 1
Reinitializing RNG... OK
OK

Starting falcon_monitor:OK

iDirect Linux 2.4.24-uc0-iDirect0


Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: admin


Linux iDirect 2.4.24-uc0-iDirect0 #1 Wed Jun 15 12:44:25 EDT 2011 armv5b unknown

Entering character mode


Escape character is '^]'.

Username: admin
Password: **************

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> ***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
xoff

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> DRAM Test ................
DRAM Test Successful
+Detected Hard Push Button Reset
Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]


release, version "iDirect 1.1" - built 12:55:42, Jun 15 2011

Platform: iDirect iDS Platform (XScale)


Copyright (C) 2004, 2005 iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available


FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
RedBoot> fis load Linux
RedBoot> exec -c "root=/dev/mtdblock2 console=ttyS1,9600 single"
Using base address 0x01600000 and length 0x00100000
Uncompressing
Linux................................................................... done,
booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed
Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS1,9600 single
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62564KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force
read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.85 booting
Calculating module dependencies... done.
Loading modules: ixp0 Note: /etc/modules.conf is more recent than
/lib/modules/2.4.24-uc0-iDirect0/modules.dep
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/char/ds2430a.o
will taint the kernel: non-GPL license - copyright iDirect Technologies- 2004
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ds2430a loaded, with warnings
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/ixp400/ixp400.o
will taint the kernel: no license
Module init.
Module ixp400 loaded, with warnings
Warning: loading /lib/modules/2.ixp425_eth:
4.24-uc0-iDirect0/kernel/drivers/net/ixp425_eth.o will taint theInitializing IXP425
NPE Ethernet driver software v. 0.1.9 (1_4)
kernel: non-GPL license - Copyright (c) Intel Corporation. 2002-2003
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 266 MHz
Module ixp425_eth loaded, with warnings
ixp1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-10-200 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-
uc0-iDirect0/modulesTx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base =
0x52008000
.dep
modprobe: Can't locate module char-major-10-200
char-majofpga: Apr 21 2015 20:00:44
r-233 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
cpld: Apr 21 2015 20:00:42
char-major-232 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-232-0 Note: rawio: Apr 21 2015 20:00:56
/etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-iDirect0/modules.dep
char-major-231 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-254 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep

Mounting local filesystems...


Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Cleaning: /tmp /var/lock /var/run.
net.ipv4.ip_forward = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.a/ # cd /
/ # cat /dev/eeprom | hexdump -C
00000000 30 45 45 30 30 30 31 31 34 31 30 30 30 31 00 80 |0EE00011410001..|
00000010 01 7a 00 00 45 62 d6 7a 00 00 00 00 00 00 00 00 |.z..Eb.z........|
00000020 00 80 ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000040 c0 63 c0 8d 4b 58 ce 6c 6c cf 54 34 e7 78 8d 8a |.c..KX.ll.T4.x..|
00000050 f3 ac 95 bc f4 2e c8 50 43 65 dc 81 00 00 00 00 |.......PCe......|
00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0 |................|
00000080
/ # cat /dev/eeprom1 | hexdump -C
00000000 c0 63 c0 8d 4b 58 ce 6c 6c cf 54 34 e7 78 8d 8a |.c..KX.ll.T4.x..|
00000010 f3 ac 95 bc f4 2e c8 50 43 65 dc 81 00 00 00 00 |.......PCe......|
00000020
/ # cat /dev/prom | hexdump -C
00000000 03 45 34 30 02 31 ea ff ff ff ff ff ff ff ff ff |.E40.1..........|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 35 |...............5|
00000020
/ # ls
bin etc mnt pkg root stage tmp var
dev lib opt proc sbin sys usr
/ # cd dev
/dev # ls
console ttyAM3 ttyMX15 ttyUSB11 ttypc
core ttyAM4 ttyMX2 ttyUSB12 ttypd
dvbs2-btp ttyAM5 ttyMX3 ttyUSB13 ttype
dvbs2-rx1 ttyAM6 ttyMX4 ttyUSB14 ttypf
dvbs2-sof ttyAM7 ttyMX5 ttyUSB15 ttyq0
dvbs2-tx ttyAM8 ttyMX6 ttyUSB2 ttyq1
eeprom ttyAM9 ttyMX7 ttyUSB3 ttyq2
eeprom1 ttyC0 ttyMX8 ttyUSB4 ttyq3
fpga-dc ttyC1 ttyMX9 ttyUSB5 ttyq4
fpga-dc1 ttyC10 ttyMa ttyUSB6 ttyq5
fpga-dc2 ttyC11 ttyMb ttyUSB7 ttyq6
fpga-fec ttyC12 ttyMc ttyUSB8 ttyq7
fpga-rx1 ttyC13 ttyMd ttyUSB9 ttyq8
fpga-rx2 ttyC14 ttyMe ttyV0 ttyq9
fpga-tx ttyC15 ttyMf ttyV1 ttyqa
full ttyC2 ttyP0 ttyV10 ttyqb
initctl ttyC3 ttyP1 ttyV11 ttyqc
kmem ttyC4 ttyP10 ttyV12 ttyqd
log ttyC5 ttyP11 ttyV13 ttyqe
mcast-fp-rx ttyC6 ttyP12 ttyV14 ttyqf
mcd-int ttyC7 ttyP13 ttyV15 ttyr0
mem ttyC8 ttyP14 ttyV2 ttyr1
ms-timer ttyC9 ttyP15 ttyV3 ttyr2
mtd0 ttyCH0 ttyP2 ttyV4 ttyr3
mtd1 ttyCH1 ttyP3 ttyV5 ttyr4
mtd10 ttyCH10 ttyP4 ttyV6 ttyr5
mtd11 ttyCH11 ttyP5 ttyV7 ttyr6
mtd12 ttyCH12 ttyP6 ttyV8 ttyr7
mtd13 ttyCH13 ttyP7 ttyV9 ttyr8
mtd14 ttyCH14 ttyP8 ttyW0 ttyr9
mtd15 ttyCH15 ttyP9 ttyW1 ttyra
mtd2 ttyCH2 ttyR0 ttyW10 ttyrb
mtd3 ttyCH3 ttyR1 ttyW11 ttyrc
mtd4 ttyCH4 ttyR10 ttyW12 ttyrd
mtd5 ttyCH5 ttyR11 ttyW13 ttyre
mtd6 ttyCH6 ttyR12 ttyW14 ttyrf
mtd7 ttyCH7 ttyR13 ttyW15 ttys0
mtd8 ttyCH8 ttyR14 ttyW2 ttys1
mtd9 ttyCH9 ttyR15 ttyW3 ttys2
mtd_shadow0 ttyD0 ttyR2 ttyW4 ttys3
mtd_shadow1 ttyD1 ttyR3 ttyW5 ttys4
mtd_shadow10 ttyD10 ttyR4 ttyW6 ttys5
mtd_shadow11 ttyD11 ttyR5 ttyW7 ttys6
mtd_shadow12 ttyD12 ttyR6 ttyW8 ttys7
mtd_shadow13 ttyD13 ttyR7 ttyW9 ttys8
mtd_shadow14 ttyD14 ttyR8 ttyX0 ttys9
mtd_shadow15 ttyD15 ttyR9 ttyX1 ttysa
mtd_shadow2 ttyD2 ttyS0 ttyX10 ttysb
mtd_shadow3 ttyD3 ttyS1 ttyX11 ttysc
mtd_shadow4 ttyD4 ttyS10 ttyX12 ttysd
mtd_shadow5 ttyD5 ttyS11 ttyX13 ttyse
mtd_shadow6 ttyD6 ttyS12 ttyX14 ttysf
mtd_shadow7 ttyD7 ttyS13 ttyX15 ttyt0
mtd_shadow8 ttyD8 ttyS14 ttyX2 ttyt1
mtd_shadow9 ttyD9 ttyS15 ttyX3 ttyt2
mtdblock0 ttyDB0 ttyS2 ttyX4 ttyt3
mtdblock1 ttyDB1 ttyS3 ttyX5 ttyt4
mtdblock10 ttyDB2 ttyS4 ttyX6 ttyt5
mtdblock11 ttyDB3 ttyS5 ttyX7 ttyt6
mtdblock12 ttyDB4 ttyS6 ttyX8 ttyt7
mtdblock13 ttyDB5 ttyS7 ttyX9 ttyt8
mtdblock14 ttyDB6 ttyS8 ttyY0 ttyt9
mtdblock15 ttyDB7 ttyS9 ttyY1 ttyta
mtdblock2 ttyE0 ttySA0 ttyY10 ttytb
mtdblock3 ttyE1 ttySA1 ttyY11 ttytc
mtdblock4 ttyE10 ttySA2 ttyY12 ttytd
mtdblock5 ttyE11 ttySC0 ttyY13 ttyte
mtdblock6 ttyE12 ttySC1 ttyY14 ttytf
mtdblock7 ttyE13 ttySC2 ttyY15 ttyu0
mtdblock8 ttyE14 ttySC3 ttyY2 ttyu1
mtdblock9 ttyE15 ttySI0 ttyY3 ttyu2
mtdr0 ttyE2 ttySI1 ttyY4 ttyu3
mtdr1 ttyE3 ttySI10 ttyY5 ttyu4
mtdr10 ttyE4 ttySI11 ttyY6 ttyu5
mtdr11 ttyE5 ttySI12 ttyY7 ttyu6
mtdr12 ttyE6 ttySI13 ttyY8 ttyu7
mtdr13 ttyE7 ttySI14 ttyY9 ttyu8
mtdr14 ttyE8 ttySI15 ttya0 ttyu9
mtdr15 ttyE9 ttySI2 ttya1 ttyua
mtdr2 ttyF0 ttySI3 ttya2 ttyub
mtdr3 ttyF1 ttySI4 ttya3 ttyuc
mtdr4 ttyF10 ttySI5 ttya4 ttyud
mtdr5 ttyF11 ttySI6 ttya5 ttyue
mtdr6 ttyF12 ttySI7 ttya6 ttyuf
mtdr7 ttyF13 ttySI8 ttya7 ttyv0
mtdr8 ttyF14 ttySI9 ttya8 ttyv1
mtdr9 ttyF15 ttySR0 ttya9 ttyv2
net ttyF2 ttySR1 ttyaa ttyv3
netlink ttyF3 ttySR10 ttyab ttyv4
nios_prog ttyF4 ttySR11 ttyac ttyv5
null ttyF5 ttySR12 ttyad ttyv6
port ttyF6 ttySR13 ttyae ttyv7
prom ttyF7 ttySR14 ttyaf ttyv8
ptyp0 ttyF8 ttySR15 ttyb0 ttyv9
ptyp1 ttyF9 ttySR2 ttyb1 ttyva
ptyp2 ttyFB0 ttySR256 ttyb2 ttyvb
ptyp3 ttyFW0 ttySR257 ttyb3 ttyvc
ptyp4 ttyFW1 ttySR258 ttyb4 ttyvd
ptyp5 ttyFW2 ttySR259 ttyb5 ttyve
ptyp6 ttyFW3 ttySR260 ttyb6 ttyvf
ptyp7 ttyH0 ttySR261 ttyb7 ttyw0
ptyp8 ttyH1 ttySR262 ttyb8 ttyw1
ptyp9 ttyH10 ttySR263 ttyb9 ttyw2
ptypa ttyH11 ttySR264 ttyba ttyw3
ptypb ttyH12 ttySR265 ttybb ttyw4
ptypc ttyH13 ttySR266 ttybc ttyw5
ptypd ttyH14 ttySR267 ttybd ttyw6
ptype ttyH15 ttySR268 ttybe ttyw7
ptypf ttyH2 ttySR269 ttybf ttyw8
random ttyH3 ttySR270 ttyc0 ttyw9
rawio ttyH4 ttySR271 ttyc1 ttywa
rcs-mac ttyH5 ttySR3 ttyc2 ttywb
scpc-btp ttyH6 ttySR4 ttyc3 ttywc
scpc-btp-rx ttyH7 ttySR5 ttyc4 ttywd
scpc-rx1 ttyH8 ttySR6 ttyc5 ttywe
scpc-rx2 ttyH9 ttySR7 ttyc6 ttywf
scpc-sof ttyI0 ttySR8 ttyc7 ttyx0
scpc-tx ttyI1 ttySR9 ttyc8 ttyx1
sda ttyI10 ttyT0 ttyc9 ttyx2
sda1 ttyI11 ttyT1 ttyca ttyx3
sda10 ttyI12 ttyT10 ttycb ttyx4
sda11 ttyI13 ttyT11 ttycc ttyx5
sda12 ttyI14 ttyT12 ttycd ttyx6
sda13 ttyI15 ttyT13 ttyce ttyx7
sda14 ttyI2 ttyT14 ttycf ttyx8
sda15 ttyI3 ttyT15 ttyd0 ttyx9
sda2 ttyI4 ttyT2 ttyd1 ttyxa
sda3 ttyI5 ttyT3 ttyd2 ttyxb
sda4 ttyI6 ttyT4 ttyd3 ttyxc
sda5 ttyI7 ttyT5 ttyd4 ttyxd
sda6 ttyI8 ttyT6 ttyd5 ttyxe
sda7 ttyI9 ttyT7 ttyd6 ttyxf
sda8 ttyL0 ttyT8 ttyd7 ttyy0
sda9 ttyL1 ttyT9 ttyd8 ttyy1
stderr ttyL10 ttyU0 ttyd9 ttyy2
stdin ttyL11 ttyU1 ttyda ttyy3
stdout ttyL12 ttyU10 ttydb ttyy4
tdma-btp ttyL13 ttyU11 ttydc ttyy5
tdma-btp_req ttyL14 ttyU12 ttydd ttyy6
tdma-rx1 ttyL15 ttyU13 ttyde ttyy7
tdma-rx2 ttyL2 ttyU14 ttydf ttyy8
tdma-tx ttyL3 ttyU15 ttye0 ttyy9
tdma-tx_sof ttyL4 ttyU2 ttye1 ttyya
tty ttyL5 ttyU3 ttye2 ttyyb
tty0 ttyL6 ttyU4 ttye3 ttyyc
tty1 ttyL7 ttyU5 ttye4 ttyyd
tty10 ttyL8 ttyU6 ttye5 ttyye
tty11 ttyL9 ttyU7 ttye6 ttyyf
tty12 ttyLU0 ttyU8 ttye7 ttyz0
tty13 ttyLU1 ttyU9 ttye8 ttyz1
tty14 ttyLU2 ttyUB0 ttye9 ttyz2
tty15 ttyLU3 ttyUB1 ttyea ttyz3
tty2 ttyM0 ttyUB10 ttyeb ttyz4
tty3 ttyM1 ttyUB11 ttyec ttyz5
tty4 ttyM2 ttyUB12 ttyed ttyz6
tty5 ttyM3 ttyUB13 ttyee ttyz7
tty6 ttyM4 ttyUB14 ttyef ttyz8
tty7 ttyM5 ttyUB15 ttyp0 ttyz9
tty8 ttyM6 ttyUB2 ttyp1 ttyza
tty9 ttyM7 ttyUB3 ttyp2 ttyzb
ttyAM0 ttyM8 ttyUB4 ttyp3 ttyzc
ttyAM1 ttyM9 ttyUB5 ttyp4 ttyzd
ttyAM10 ttyMX0 ttyUB6 ttyp5 ttyze
ttyAM11 ttyMX1 ttyUB7 ttyp6 ttyzf
ttyAM12 ttyMX10 ttyUB8 ttyp7 tx-hpq
ttyAM13 ttyMX11 ttyUB9 ttyp8 urandom
ttyAM14 ttyMX12 ttyUSB0 ttyp9 zero
ttyAM15 ttyMX13 ttyUSB1 ttypa
ttyAM2 ttyMX14 ttyUSB10 ttypb
/dev # cd /
/ # reboot
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
INIStopping OpenBSD Secure Shell server: sshd.
Stopping falcon_monitor: [Not Running]
Stopping falcon: [Not Running]
Stopping system log daemon: klogd syslogd.
Sending all processes the TERM signal... done.
Sending all processes the KILL signal... done.
Saving random seed... done.
Unmounting remote filesystems... done.
Unmounting local filesystems... done.
mount: cannot read /proc/mounts: No such file or directory
Rebooting... flushing ide devices:
Restarting system.
DRAM Test ................
DRAM Test Successful
+Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]


release, version "iDirect 1.1" - built 12:55:42, Jun 15 2011

Platform: iDirect iDS Platform (XScale)


Copyright (C) 2004, 2005 iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available


FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
== Executing boot script in 5.000 seconds - Press <Space Bar> to abort
RedBoot> fis load Linux
RedBoot> exec
Using base address 0x01600000 and length 0x00100000
Uncompressing
Linux................................................................... done,
booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed
Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS1,9600 root=/dev/mtdblock2
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62564KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force
read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.85 booting
Calculating module dependencies... done.
Loading modules: ixp0 Note: /etc/modules.conf is more recent than
/lib/modules/2.4.24-uc0-iDirect0/modules.dep
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/char/ds2430a.o
will taint the kernel: non-GPL license - copyright iDirect Technologies- 2004
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ds2430a loaded, with warnings
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/ixp400/ixp400.o
will taint the kernel: no license
Module init.
Module ixp400 loaded, with warnings
Warning: loading /lib/modules/2.ixp425_eth:
4.24-uc0-iDirect0/kernel/drivers/net/ixp425_eth.o will taint theInitializing IXP425
NPE Ethernet driver software v. 0.1.9 (1_4)
kernel: non-GPL license - Copyright (c) Intel Corporation. 2002-2003
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 266 MHz
Module ixp425_eth loaded, with warnings
ixp1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-10-200 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-
uc0-iDirect0/modulesTx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base =
0x52008000
.dep
modprobe: Can't locate module char-major-10-200
char-majofpga: Apr 21 2015 20:00:44
r-233 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
cpld: Apr 21 2015 20:00:42
char-major-232 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-232-0 Note: rawio: Apr 21 2015 20:00:56
/etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-iDirect0/modules.dep
char-major-231 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-254 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep

Mounting local filesystems...


Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Cleaning: /tmp /var/lock /var/run.
net.ipv4.ip_forward = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.rp_filter = 1
INIT: Entering runlevel: 2
Starting system log daemon: syslogd klogd.
Starting OpenBSD Secure Shell server: sshdCould not load host key:
/etc/ssh/ssh_host_ecdsa_key
Could not load host key: /etc/ssh/ssh_host_ed25519_key
.
Starting falcon:Using OpenSSL 1.0.1j-fips 15 Oct 2014
Starting Falcon...
initialize system clock to Sat Dec 8 20:16:15 2018
ACC key file was not found but hub/remote can be running in NON-FIPS or NON-TRANSEC
mode
Darwin Remote CreateDarwinMdmCtrl
/usr/sbin/load_fpgas_remote.sh nomesh 0 0 0 0 ss_disable tx_ss_disable dvbs2 1 x
idirect_tdma
Tx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base = 0x52008000
fpga: Apr 21 2015 20:00:44
i2c-dev.o: Registered 'FPGA-I2C Adapter' as minor 0
i2c-core.o: adapter FPGA-I2C Adapter registered as adapter 0.
i2c-opencore: __DATE__ __TIME__
i2c-core.o: driver stv0900 registered.
i2c-core.o: client [stv0900] registered to adapter [FPGA-I2C Adapter](pos. 0).
stv0900: Apr 21 2015 20:00:57
i2c-core.o: driver stb6100 registered.
i2c-core.o: client [stb6100] registered to adapter [FPGA-I2C Adapter](pos. 1).
stb6100: Apr 21 2015 20:00:57
CurstomerCert::LoadFromDisk(): no TRUSTED cert,
fpga_open function 237 line num
PCI: enabling device 00:0e.0 (0000 -> 0002)

fpga_dma_alloc_burst_event_pages function 252 line num bep_pages_virt_addr =


0xc6e1d000

fpga_dma_alloc_burst_event_pages function 253 line num bep_page0_dma_addr =


0x1c60000

fpga_dma_alloc_burst_event_pages function 254 line num bep_page1_dma_addr =


0x1c64008

fpga_dma_alloc_burst_event_pages function 255 line num bep_page2_dma_addr =


0x1c68010

fpga_dma_alloc_burst_event_pages function 256 line num bep_page3_dma_addr =


0x1c6c018

fpga_dma_alloc_burst_event_pages function 262 line num physical_address = 0x1c60000


fpga: probe
Bus 0, device 14, function 0: (id: 1172-0001)
noname
Memory: 0x4B000000-0x4B003FFF.
IRQ: 26
*** remote.cpp:Init:290 m_l2_mode = 229

L2 Mode of Operation [False]


ExtIntf Reload DarwinBoardCalibration new successful>>>>>>>>>

mod_error : 1.315000
Loaded board Calibration
OduCtrl::Reload(16) m_i_am_rx=0 m_i_am_tx=1
OduCtrl::Reload(16) is_standby=0
OduCtrl::Reload(16) odu_tx_dc_power=1
OduCtrl::Reload(16) odu_tx_10_mhz=1
OduCtrl::Reload(16) odu_tx_27_mhz=0
OduCtrl::SetTxDC(16) on=1
Unknown DDS Device
Band = 0 phase =0xFFFFFC98 gain = 0x000040A7
REG1 = 0x0000 REG2=0x0001 REG3=0x257E REG4=0x0073 Clock = 10000000l
Frame length = 125
Frame length = 125
Unknown DDS Device
Band = 0 phase =0xFFFFFC98 gain = 0x000040A7
REG1 = 0x0000 REG2=0x0001 REG3=0x257E REG4=0x0073 Clock = 10000000l
OduCtrl::Reload(32) m_i_am_rx=1 m_i_am_tx=0
OduCtrl::Reload(32) is_standby=0
OduCtrl::Reloadfpga_open function 237 line num
(32) odu_rx_dc_power=1
OduCtrl::Reload(32) odu_rx_10_mhz=1
OduCtrl::Reload(32) force_mux_on=0
Checking SSRAM test complete...
SSRAM test completed: WO[passed] A2D[passed]

Loading Griffin image =Fpga_evolx3_TxRx_3C40_06


Griffin Program -- Success
***** STV0900: Detected chip id 0x20 *****
mlband 1020000000
dvbs2 mode
cal
vco[0x7c]ni[0x4b]nf[0x1c]k[0x3d]g[0x3c]f[0xd6]dlb[0xdc]t1[0x8f]fcck[0xd]lpen[0xfb]t
3[0xde]
prg
lock[0x81]vco[0x7c]ni[0x4b]nf[0x1c]k[0x3d]g[0x3c]f[0xd6]dlb[0xdc]t1[0x8f]fcck[0xd]l
pen[0xfb]t2[0xde]
Actual Freq = 1020.0000 MHz Programmed LO = 1019.9883 MHz lpf = 27 MHz nco =
11718 Hz
***** STV0900: Detected chip id 0x20 *****
Fan monitoring is disabled for this remotefpga_open function 237 line num

fpga_open function 322 line num


fpga_rcs_mac_ioctl function 115 line num
fpga_rcs_mac_mmap function 143 line num
BurstEventCtrl::ConfigureDevice pa[0x1c60000] bep0[0x4109f000] bep1[0x410a3008]
bep2[0x410a7010]ixp425_eth: ixp0: Entering promiscuous mode
bep3[0x410ab018]
bool iDirect::BurstEventCtrl::Reload(const Opdevice ixp0 entered promiscuous mode
tions*)::212
Tx Muted:Waiting for NCR-10M fll to lock
Skip slot time 40500 ncr ticks (btpReq 405000)
GdCompMonitorDevice ActivateTimer

modem_control reload returns with return value of: 1


fp[0] ft[0] wt[0]
fp[82] ft[88] wt[0]
SyncEth0: updated system config file "/etc/network/infpga_open function 237 line
num
terfaces"
Using conventional reads
Ifname: ixp0 Ifindex: 65632fpga_open function 237 line num
MAC: 00:60:43:62:d6:7a
route: ioctl 0x890c failed: No such profpga_open function 237 line num
cess
UnixControl::Reload: /sbin/route add -net 0.0.0.0 netmask fpga_open function 237
line num
0.0.0.0 gw 10.11.45.201 tun0 < /dev/null

Version of the map fpga_open function 237 line num


client 1PowerMgmt Reload m_evt =64
fpga_open function 237 line num
SetMcastCtrl(Channel = 0, Mask = ffe0)
Interface: ixp0, PhyCount: 1
Reinitializing RNG... OK
OK
Starting falcon_monitor:OK

iDirect Linux 2.4.24-uc0-iDirect0


Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: admin


Linux iDirect 2.4.24-uc0-iDirect0 #1 Wed Jun 15 12:44:25 EDT 2011 armv5b unknown

Entering character mode


Escape character is '^]'.

Username: admin
Password: **************

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> logs
Unknown Command: 'logs'

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> ***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
xoff

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> help
DID Show modem identification number
TERMINATE Kill process
acq ACQ/UCP control
antenna
arp ARP control
beam
beamselector
btp Burst Controller
classifier classifier command
clear Clear screen
console Console control
cpu Show CPU utilization percentage
date get the down stream time information
dfoe Dynamic Features and Options exchange
dfoerxonly Rx-Only Dynamic Features and Options exchange
dgm_pkg_rx Datagram Package Download Receiver control
dhcp DHCP server command
diag Diagnostic commands
dma
dns DNS control
eepromsn Show modem serial number as written in eeprom
eth Show the output of ifconfig command
fips enable/disable fips mode
fll FLL/DAC sampling
fpga
gecho Global echo
gpspollinterval seconds
gpsvalidationstatus Status of GPS Validation
gre gre protocol
icmp ICMP protocol inpection layer console command
ifconfig network interface configuration
igmp Multicast control
inroute inroute Info
ip Router control
ipv4 IPv4 protocol acceleration control layer
jittermgmt Jitter Management
keyroll_mgr keyroll manager command
ktun Kernel Tunnel Command
l2_classifier L2 classifier command
l2tp_compress L2TP Payload compress
lan_port_monitor
laninfo View IP address/netmask
latlong LAT LONG
license get license
licensestat Remote license status information
ll Link Layer control
mac MAC control
map debug/show/delete
mapclient
maphandler
mcqos Multicast QoS
nat NAT Control
netstat Show the output of a netstat command
offline Offline
online Online
oob OOB control
options Options file manipulation
packages Show list of installed software packages and their versions
passwd Change password
pcmd Periodic Console Command
ping Ping Utility
port
powermgmt Power Management
qos QoS control
random Test Random Number Generator
remotestate Displays the current remote state
reset Reset machine or restart service
rmtlanstat Send remote LAN status to hub
rmtlock Locks the remote to work in a specific network
rx
service Service start/stop command
sn Show modem serial number
spoof Spoof Command
start_debug_mode start debug mode
stats View/Edit global stats
status Display FIPS status
stop_debug_mode stop debug mode
sys_time Sys Time Tick
systray Systray status sender command
testleds test LEDs
tlev Trace control
tls tls control
tls_mnc TLS MnC server command
traceroute Print route packets take through network
transec TRANSEC related FPGA registers stats
transec_layer transec layer command
tx
txstate Displays the current Transmit state
udp Udp Command
udp_compress UDP Payload compress
uptime System and application uptime
version Build information
versions_report Full operating environment report
vlan VLAN control
x509 Manage X509 Certificates and RSA keys
xoff disallow messages from other processes
xon allow messages from other processes
zeroize zeroize FIPS components

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> DRAM Test ................
DRAM Test Successful
+Detected Hard Push Button Reset
Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]


release, version "iDirect 1.1" - built 12:55:42, Jun 15 2011

Platform: iDirect iDS Platform (XScale)


Copyright (C) 2004, 2005 iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available


FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
RedBoot> fis load Linux
RedBoot> exec -c "root=/dev/mtdblock2 console=ttyS1,9600 single"
Using base address 0x01600000 and length 0x00100000
Uncompressing
Linux................................................................... done,
booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed
Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS1,9600 single
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62564KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force
read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.85 booting
Calculating module dependencies... done.
Loading modules: ixp0 Note: /etc/modules.conf is more recent than
/lib/modules/2.4.24-uc0-iDirect0/modules.dep
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/char/ds2430a.o
will taint the kernel: non-GPL license - copyright iDirect Technologies- 2004
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ds2430a loaded, with warnings
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/ixp400/ixp400.o
will taint the kernel: no license
Module init.
Module ixp400 loaded, with warnings
Warning: loading /lib/modules/2.ixp425_eth:
4.24-uc0-iDirect0/kernel/drivers/net/ixp425_eth.o will taint theInitializing IXP425
NPE Ethernet driver software v. 0.1.9 (1_4)
kernel: non-GPL license - Copyright (c) Intel Corporation. 2002-2003
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 266 MHz
Module ixp425_eth loaded, with warnings
ixp1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-10-200 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-
uc0-iDirect0/modulesTx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base =
0x52008000
.dep
modprobe: Can't locate module char-major-10-200
char-majofpga: Apr 21 2015 20:00:44
r-233 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
cpld: Apr 21 2015 20:00:42
char-major-232 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-232-0 Note: rawio: Apr 21 2015 20:00:56
/etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-iDirect0/modules.dep
char-major-231 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-254 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep

Mounting local filesystems...


Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Cleaning: /tmp /var/lock /var/run.
net.ipv4.ip_forward = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.a/ # cd /
/ # cat /dev/eeprom | hexdump -C
00000000 30 45 45 30 30 30 31 31 34 31 30 30 30 31 00 80 |0EE00011410001..|
00000010 01 7a 00 00 45 62 d6 7a 00 00 00 00 00 00 00 00 |.z..Eb.z........|
00000020 00 80 ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
00000070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff b5 |................|
00000080
/ # cat /dev/eeprom1 | hexdump -C
00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
00000020
/ # cat /dev/prom | hexdump -C
00000000 03 45 34 30 02 31 ea ff ff ff ff ff ff ff ff ff |.E40.1..........|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 35 |...............5|
00000020
/ # cat /dev/prom | hexdump -c
0000000 003 E 4 0 002 1 352 377 377 377 377 377 377 377 377 377
0000010 377 377 377 377 377 377 377 377 377 377 377 377 377 377 377 5
0000020
/ # cat /dev/eeprom | hexdump -c
0000000 0 E E 0 0 0 1 1 4 1 0 0 0 1 \0 200
0000010 001 z \0 \0 E b 326 z \0 \0 \0 \0 \0 \0 \0 \0
0000020 \0 200 377 377 377 377 377 377 377 377 377 377 377 377 377 377
0000030 377 377 377 377 377 377 377 377 377 377 377 377 377 377 377 377
*
0000070 377 377 377 377 377 377 377 377 377 377 377 377 377 377 377 265
0000080
/ # cat /dev/eeprom | hexdump -C
00000000 30 45 45 30 30 30 31 31 34 31 30 30 30 31 00 80 |0EE00011410001..|
00000010 01 7a 00 00 45 62 d6 7a 00 00 00 00 00 00 00 00 |.z..Eb.z........|
00000020 00 80 ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
00000070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff b5 |................|
00000080
/ # reboot
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
INIStopping OpenBSD Secure Shell server: sshd.
Stopping falcon_monitor: [Not Running]
Stopping falcon: [Not Running]
Stopping system log daemon: klogd syslogd.
Sending all processes the TERM signal... done.
Sending all processes the KILL signal... done.
Saving random seed... done.
Unmounting remote filesystems... done.
Unmounting local filesystems... done.
mount: cannot read /proc/mounts: No such file or directory
Rebooting... flushing ide devices:
Restarting system.
DRAM Test ................
DRAM Test Successful
+Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]


release, version "iDirect 1.1" - built 12:55:42, Jun 15 2011

Platform: iDirect iDS Platform (XScale)


Copyright (C) 2004, 2005 iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available


FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
== Executing boot script in 5.000 seconds - Press <Space Bar> to abort
RedBoot> fis load Linux
RedBoot> exec
Using base address 0x01600000 and length 0x00100000
Uncompressing
Linux................................................................... done,
booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed
Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS1,9600 root=/dev/mtdblock2
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62564KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force
read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.85 booting
Calculating module dependencies... done.
Loading modules: ixp0 Note: /etc/modules.conf is more recent than
/lib/modules/2.4.24-uc0-iDirect0/modules.dep
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/char/ds2430a.o
will taint the kernel: non-GPL license - copyright iDirect Technologies- 2004
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ds2430a loaded, with warnings
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/ixp400/ixp400.o
will taint the kernel: no license
Module init.
Module ixp400 loaded, with warnings
Warning: loading /lib/modules/2.ixp425_eth:
4.24-uc0-iDirect0/kernel/drivers/net/ixp425_eth.o will taint theInitializing IXP425
NPE Ethernet driver software v. 0.1.9 (1_4)
kernel: non-GPL license - Copyright (c) Intel Corporation. 2002-2003
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 266 MHz
Module ixp425_eth loaded, with warnings
ixp1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-10-200 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-
uc0-iDirect0/modulesTx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base =
0x52008000
.dep
modprobe: Can't locate module char-major-10-200
char-majofpga: Apr 21 2015 20:00:44
r-233 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
cpld: Apr 21 2015 20:00:42
char-major-232 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-232-0 Note: rawio: Apr 21 2015 20:00:56
/etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-iDirect0/modules.dep
char-major-231 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-254 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep

Mounting local filesystems...


Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Cleaning: /tmp /var/lock /var/run.
net.ipv4.ip_forward = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.rp_filter = 1
INIT: Entering runlevel: 2
Starting system log daemon: syslogd klogd.
Starting OpenBSD Secure Shell server: sshdCould not load host key:
/etc/ssh/ssh_host_ecdsa_key
Could not load host key: /etc/ssh/ssh_host_ed25519_key
.
Starting falcon:Using OpenSSL 1.0.1j-fips 15 Oct 2014
Starting Falcon...
initialize system clock to Sat Dec 8 20:16:15 2018
ACC key file was not found but hub/remote can be running in NON-FIPS or NON-TRANSEC
mode
Darwin Remote CreateDarwinMdmCtrl
/usr/sbin/load_fpgas_remote.sh nomesh 0 0 0 0 ss_disable tx_ss_disable dvbs2 1 x
idirect_tdma
Tx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base = 0x52008000
fpga: Apr 21 2015 20:00:44
i2c-dev.o: Registered 'FPGA-I2C Adapter' as minor 0
i2c-core.o: adapter FPGA-I2C Adapter registered as adapter 0.
i2c-opencore: __DATE__ __TIME__
i2c-core.o: driver stv0900 registered.
i2c-core.o: client [stv0900] registered to adapter [FPGA-I2C Adapter](pos. 0).
stv0900: Apr 21 2015 20:00:57
i2c-core.o: driver stb6100 registered.
i2c-core.o: client [stb6100] registered to adapter [FPGA-I2C Adapter](pos. 1).
stb6100: Apr 21 2015 20:00:57
CurstomerCert::LoadFromDisk(): no TRUSTED cert,
fpga_open function 237 line num
PCI: enabling device 00:0e.0 (0000 -> 0002)

fpga_dma_alloc_burst_event_pages function 252 line num bep_pages_virt_addr =


0xc6e1d000

fpga_dma_alloc_burst_event_pages function 253 line num bep_page0_dma_addr =


0x1c60000

fpga_dma_alloc_burst_event_pages function 254 line num bep_page1_dma_addr =


0x1c64008
fpga_dma_alloc_burst_event_pages function 255 line num bep_page2_dma_addr =
0x1c68010

fpga_dma_alloc_burst_event_pages function 256 line num bep_page3_dma_addr =


0x1c6c018

fpga_dma_alloc_burst_event_pages function 262 line num physical_address = 0x1c60000


fpga: probe
Bus 0, device 14, function 0: (id: 1172-0001)
noname
Memory: 0x4B000000-0x4B003FFF.
IRQ: 26
*** remote.cpp:Init:290 m_l2_mode = 229

L2 Mode of Operation [False]


ExtIntf Reload DarwinBoardCalibration new successful>>>>>>>>>

mod_error : 1.315000
Loaded board Calibration
OduCtrl::Reload(16) m_i_am_rx=0 m_i_am_tx=1
OduCtrl::Reload(16) is_standby=0
OduCtrl::Reload(16) odu_tx_dc_power=1
OduCtrl::Reload(16) odu_tx_10_mhz=1
OduCtrl::Reload(16) odu_tx_27_mhz=0
OduCtrl::SetTxDC(16) on=1
Unknown DDS Device
Band = 0 phase =0xFFFFFC98 gain = 0x000040A7
REG1 = 0x0000 REG2=0x0001 REG3=0x257E REG4=0x0073 Clock = 10000000l
Frame length = 125
Frame length = 125
Unknown DDS Device
Band = 0 phase =0xFFFFFC98 gain = 0x000040A7
REG1 = 0x0000 REG2=0x0001 REG3=0x257E REG4=0x0073 Clock = 10000000l
OduCtrl::Reload(32) m_i_am_rx=1 m_i_am_tx=0
OduCtrl::Reload(32) is_standby=0
OduCtrl::Reloadfpga_open function 237 line num
(32) odu_rx_dc_power=1
OduCtrl::Reload(32) odu_rx_10_mhz=1
OduCtrl::Reload(32) force_mux_on=0
Checking SSRAM test complete...
SSRAM test completed: WO[passed] A2D[passed]

Loading Griffin image =Fpga_evolx3_TxRx_3C40_06


Griffin Program -- Success
***** STV0900: Detected chip id 0x20 *****
mlband 1020000000
dvbs2 mode
cal
vco[0x7c]ni[0x4b]nf[0x1c]k[0x3d]g[0x3c]f[0xd6]dlb[0xdc]t1[0x8f]fcck[0xd]lpen[0xfb]t
3[0xde]
prg
lock[0x81]vco[0x7c]ni[0x4b]nf[0x1c]k[0x3d]g[0x3c]f[0xd6]dlb[0xdc]t1[0x8f]fcck[0xd]l
pen[0xfb]t2[0xde]
Actual Freq = 1020.0000 MHz Programmed LO = 1019.9883 MHz lpf = 27 MHz nco =
11718 Hz
***** STV0900: Detected chip id 0x20 *****
Fan monitoring is disabled for this remotefpga_open function 237 line num
fpga_open function 322 line num
fpga_rcs_mac_ioctl function 115 line num
fpga_rcs_mac_mmap function 143 line num
BurstEventCtrl::ConfigureDevice pa[0x1c60000] bep0[0x4109f000] bep1[0x410a3008]
bep2[0x410a7010]ixp425_eth: ixp0: Entering promiscuous mode
bep3[0x410ab018]
bool iDirect::BurstEventCtrl::Reload(const Opdevice ixp0 entered promiscuous mode
tions*)::212
Tx Muted:Waiting for NCR-10M fll to lock
Skip slot time 40500 ncr ticks (btpReq 405000)
GdCompMonitorDevice ActivateTimer

modem_control reload returns with return value of: 1


fp[0] ft[0] wt[0]
fp[82] ft[88] wt[0]
SyncEth0: updated system config file "/etc/network/infpga_open function 237 line
num
terfaces"
Using conventional reads
Ifname: ixp0 Ifindex: 65632fpga_open function 237 line num
MAC: 00:60:43:62:d6:7a
route: ioctl 0x890c failed: No such profpga_open function 237 line num
cess
UnixControl::Reload: /sbin/route add -net 0.0.0.0 netmask fpga_open function 237
line num
0.0.0.0 gw 10.11.45.201 tun0 < /dev/null

Version of the map fpga_open function 237 line num


client 1PowerMgmt Reload m_evt =64
fpga_open function 237 line num
SetMcastCtrl(Channel = 0, Mask = ffe0)
Interface: ixp0, PhyCount: 1
Reinitializing RNG... OK
OK

Starting falcon_monitor:OK

iDirect Linux 2.4.24-uc0-iDirect0


Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: admin


Linux iDirect 2.4.24-uc0-iDirect0 #1 Wed Jun 15 12:44:25 EDT 2011 armv5b unknown

Entering character mode


Escape character is '^]'.

Username: admin
Password: **************

[RMT:143850] admin@telnet:::ffff:127.0.0.1;1024
> ***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
telnet:::ffff:84.11.45.202;49173 started
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
***** STV0900: Detected chip id 0x20 *****
Stv0900Cut2::FE_StartSearch
**:▒5▒Test ................
DRAM Test Successful
+Detected Hard Push Button Reset
Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]


release, version "iDirect 1.1" - built 12:55:42, Jun 15 2011

Platform: iDirect iDS Platform (XScale)


Copyright (C) 2004, 2005 iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available


FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
RedBoot> fis load Linux
RedBoot> exec -c "root=/dev/mtdblock2 console=ttyS1,9600 single"
Using base address 0x01600000 and length 0x00100000
Uncompressing
Linux................................................................... done,
booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed
Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS1,9600 single
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62564KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force
read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.85 booting
Calculating module dependencies... done.
Loading modules: ixp0 Note: /etc/modules.conf is more recent than
/lib/modules/2.4.24-uc0-iDirect0/modules.dep
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/char/ds2430a.o
will taint the kernel: non-GPL license - copyright iDirect Technologies- 2004
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ds2430a loaded, with warnings
Warning: loading /lib/modules/2.4.24-uc0-iDirect0/kernel/drivers/ixp400/ixp400.o
will taint the kernel: no license
Module init.
Module ixp400 loaded, with warnings
Warning: loading /lib/modules/2.ixp425_eth:
4.24-uc0-iDirect0/kernel/drivers/net/ixp425_eth.o will taint theInitializing IXP425
NPE Ethernet driver software v. 0.1.9 (1_4)
kernel: non-GPL license - Copyright (c) Intel Corporation. 2002-2003
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 266 MHz
Module ixp425_eth loaded, with warnings
ixp1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-10-200 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-
uc0-iDirect0/modulesTx Base = 0x52000000 Rx1 Base = 0x52001000 Rx2 Base =
0x52008000
.dep
modprobe: Can't locate module char-major-10-200
char-majofpga: Apr 21 2015 20:00:44
r-233 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
cpld: Apr 21 2015 20:00:42
char-major-232 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-232-0 Note: rawio: Apr 21 2015 20:00:56
/etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-iDirect0/modules.dep
char-major-231 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep
char-major-254 Note: /etc/modules.conf is more recent than /lib/modules/2.4.24-uc0-
iDirect0/modules.dep

Mounting local filesystems...


Setting up IP spoofing protection: rp_filter.
Disable TCP/IP Explicit Congestion Notification: done.
Configuring network interfaces: done.
Cleaning: /tmp /var/lock /var/run.
net.ipv4.ip_forward = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.a/ # cd /
/ # cat /dev/eeprom | hexdump -C
00000000 30 45 45 30 30 30 31 31 34 31 30 30 30 31 00 80 |0EE00011410001..|
00000010 01 7a 00 00 45 62 d6 7a 00 00 00 00 00 00 00 00 |.z..Eb.z........|
00000020 00 80 ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000040 30 95 14 be e7 9e b3 b9 b1 88 27 b1 5d b9 94 da |0.........'.]...|
00000050 5d 2c 55 13 1a 21 a0 b3 2b b8 9e c1 00 00 00 00 |],U..!..+.......|
00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
00000070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c9 |................|
00000080
/ # cat /dev/eeprom1 | hexdump -C
00000000 30 95 14 be e7 9e b3 b9 b1 88 27 b1 5d b9 94 da |0.........'.]...|
00000010 5d 2c 55 13 1a 21 a0 b3 2b b8 9e c1 00 00 00 00 |],U..!..+.......|
00000020
/ # cat /dev/prom | hexdump -C
00000000 03 45 34 30 02 31 ea ff ff ff ff ff ff ff ff ff |.E40.1..........|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 35 |...............5|
00000020
/ #

Das könnte Ihnen auch gefallen